OR 100's of misc parts from the last 6 trucks parted out

[tll74]

Originally Posted by Leroy-B1

probably going to need a whole set-up as I only have the dash...the 68 would work best may need the radiator support if available of it also and battery box

Are we talking pump, brackets, condensor, hoses, firewall case, underdash, controls, nuts, bolts and etc. Basicly stem to stern & top to bottom...Everyting?

[CC69Rat]

Looking for an above average GMC emblem for the front fender (68 Driver's side but I don't think it matters?L or R) and a LH (Drivers side) GMC grille surround trim piece. Do you still have anything from Pic 3 on the original post I see them there.

I'm looking for something not pitted real bad and / or would polish up for a fender I am painting just for practice. I'd like it to be better than driver quality but honestly the fender will hang on my garage wall. Not even going on a truck. Just decoration and the 'first fender I ever painted' wall art. Just an extra I had around.

Can you help me out ?

[Leroy-B1]

mainly just firewall case, lines, and inside cab stuff basically everything except brackets, pump, and condensor

[tll74]

Originally Posted by CC69Rat

Looking for an above average GMC emblem for the front fender (68 Driver's side but I don't think it matters?L or R) and a LH (Drivers side) GMC grille surround trim piece. Do you still have anything from Pic 3 on the original post I see them there.

I'm looking for something not pitted real bad and / or would polish up for a fender I am painting just for practice. I'd like it to be better than driver quality but honestly the fender will hang on my garage wall. Not even going on a truck. Just decoration and the 'first fender I ever painted' wall art. Just an extra I had around.

Can you help me out ?

I believe I have all 6 listed and probably another 10 still on trucks so I'm sure I can come up with a nice one. thanks

[tll74]

Originally Posted by Leroy-B1

mainly just firewall case, lines, and inside cab stuff basically everything except brackets, pump, and condensor

I have it all. I'll get back to you with a price soon. Thanks

[72blazr]

Do you have any parchment seat belts in any of those trucks?

[aventur1]

ok, I'll join in to buy, how about 67-68 grill? I'm in Boise

[tll74]

Originally Posted by Leroy-B1

mainly just firewall case, lines, and inside cab stuff basically everything except brackets, pump, and condensor

How about 400.00 plus shipping. Everything in the cab, complete firewall assy with sb hoses and the AC bracket off the battery tray (tray is rusted out). A complete set up less brackets, pump and condenser. My 68 has it all but the LH half of the firewall housing is broke where the vac reservoir mounts. The 72 looks identical. Pics no problem if interested. Thanks, Tom

Originally Posted by 72blazr

Do you have any parchment seat belts in any of those trucks?

Good question, I'll check. it seems to me I saw some couple days ago.

Originally Posted by aventur1

ok, I'll join in to buy, how about 67-68 grill? I'm in Boise

No on the 67, yes on a 68 but you would have to change the upper piece as it is off a 69-70. Thanks

[tll74]

Originally Posted by Leroy-B1

probably going to need a whole set-up as I only have the dash...the 68 would work best may need the radiator support if available of it also and battery box

No luck on the arm rest and no visor clips in the parchment color

Originally Posted by chevyman70

do you have any AC components? I need a diverter box, and the heater box that goes in the engine bay's firewall.

Sorry no partial setups for pieces at this time.

Originally Posted by byates2

would you happen to have the ignition parts for a 67, i need the spacer for the ignition switch

I have one on a truck 5.00 plus shipping.

Thanks to all, Tom

[aventur1]

Thanks for the info on grill, I guess I dont understand what you mean by upper part? Can u send some pics? My 68 has a full 71-72 front clip and I want to change it back to 68, I have the rad support, splash,and the hood. Slowley collecting parts, still need R/L fenders and passenger side wheel well and battery tray. Do I need a different hood latch when I switch over? Suppose I need the rad center support also. Thought I would ask all this while I'm looking. Afterwards going to sell all the 71-72 clip. Maybe if you have other big parts I need, I may just drive over to pickup.

[tll74]

Originally Posted by aventur1

Thanks for the info on grill, I guess I dont understand what you mean by upper part? Can u send some pics? My 68 has a full 71-72 front clip and I want to change it back to 68, I have the rad support, splash,and the hood. Slowley collecting parts, still need R/L fenders and passenger side wheel well and battery tray. Do I need a different hood latch when I switch over? Suppose I need the rad center support also. Thought I would ask all this while I'm looking. Afterwards going to sell all the 71-72 clip. Maybe if you have other big parts I need, I may just drive over to pickup.

As I recall the 67 grill is 67 only because it has "GMC" imbossed in the center. The 68 is the same just doesn't have the "GMC" and is the same w/o the upper from 68-70. Both 67 and 68 have a upper portion riveted to the grill. This piece is painted body color and makes the seem to the 67-68 sloped hood. The 69-72 grill has a upper portion as well but it is chrome and much larger and accommodates the 69-72 hood. Buy switching the uppers you use any year grill on any truck. The hood latch is 67-68 only and yes the center grill support is as well. I do have the fenders, a 69 grill and no RH inners, 67-68 uppers or tray. I'll see what I can do for pics. It may be a couple days.
Thanks, Tom

[dxevo]

Do you still have a tail light harness availabel? I need the harness that goes from mid frame to the tail lights, lic plate light, rear side markers. please let me know how much with shipping to 92706 and some pics would be great. Thanks

[tll74]

Originally Posted by dxevo

Do you still have a tail light harness availabel? I need the harness that goes from mid frame to the tail lights, lic plate light, rear side markers. please let me know how much with shipping to 92706 and some pics would be great. Thanks

The only harness I have is the one from the cab to the harness your looking for. I need that harness as well. sorry

[DnvrJay71]

I need one wiper arm. my driver side rivet that held on the blade broke off. Are they driver/passenger specific? if not, how much for two (might as well have a spare) shipped to 80134?

[tll74]

Originally Posted by DnvrJay71

I need one wiper arm. my driver side rivet that held on the blade broke off. Are they driver/passenger specific? if not, how much for two (might as well have a spare) shipped to 80134?

They are the same R and L. 25.00 shipped on a nice pair.

[DnvrJay71]

PM sent

[C5Phil]

I'll take your two best GMC turn (parking) light housings with lenses. Let me know what shipping is to 14589 zip (upstate NY). thanks- Phil

[tll74]

Originally Posted by C5Phil

I'll take your two best GMC turn (parking) light housings with lenses. Let me know what shipping is to 14589 zip (upstate NY). thanks- Phil

I'll pick out the best two. Thanks
Pm sent

[C5Phil]

Originally Posted by tll74

I'll pick out the best two. Thanks
Pm sent

money sent

[tll74]

Originally Posted by C5Phil

money sent

THANKS! I'll get them shipped out Monday, Tom

[C5Phil]

Tom, you get a chance to ship out my parking light housings yet?

[tll74]

Originally Posted by C5Phil

Tom, you get a chance to ship out my parking light housings yet?

Phil, just sent you a PM a few minutes ago. I don't have you address. Thanks, Tom

[67gmcstepside]

E-brake cables with all supports LWB only 27.50 each - still available?

[C5Phil]

Originally Posted by tll74

Phil, just sent you a PM a few minutes ago. I don't have you address. Thanks, Tom

PM'ed you my address-

[tll74]

Originally Posted by 67gmcstepside

E-brake cables with all supports LWB only 27.50 each - still available?

Yes sir, it is.