The 60-66 "PAYING IT FORWARD" thread! - Page 11 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

dodgiesdad · 05-01-2016, 08:20 PM

Mounting clips for side trim on a short bed fleet side. Ship on your dime, take some or all. I just added the side trim to my truck. As it did not originally have the side trim I was not drilling holes in the sides, so I put it in with plastic strips and double sided tape.

**ChiefRocka** · 05-06-2016, 11:31 AM

Quote:

Originally Posted by dodgiesdad

Mounting clips for side trim on a short bed fleet side. Ship on your dime, take some or all. I just added the side trim to my truck. As it did not originally have the side trim I was not drilling holes in the sides, so I put it in with plastic strips and double sided tape.

I could use them !

dodgiesdad · 05-06-2016, 12:15 PM

ChiefRocka, they are yours, PM me you address we will figure out getting them to you.

T2vigil · 05-09-2016, 08:50 PM

I picked up a couple of "Oldsmobile" radios as part of an estate sale. They appear to be mid 60's. But I am like the Sgt. - "I know Nothing". Free to a good home. I live in SE TN, Dayton. PM me if you are interested.

djones1a · 05-20-2016, 07:07 PM

I have a factory jack,handle, tire tool,the brackets and springs for a 1966 Chevrolet truck.As far as i can tell it was never out of the truck. I live 50 miles west of St.Louis right next to interstate I-70 if any one wants it they can have it. If i have to ship it i want $40.00 for it and shipping

Larry64 · 05-20-2016, 08:46 PM

Ill take it. Shipped to 37091. Send me the payment info in a pm.

Grizz1963 · 05-21-2016, 01:57 AM

Quote:

Originally Posted by djones1a

I have a factory jack,handle, tire tool,the brackets and springs for a 1966 Chevrolet truck.As far as i can tell it was never out of the truck. I live 50 miles west of St.Louis right next to interstate I-70 if any one wants it they can have it. If i have to ship it i want $40.00 for it and shipping

Not refitting those in your Race truck Dennis?

djones1a · 05-21-2016, 02:46 PM

No i don't think they would work on a nascar truck frame,might as well let someone have them that could use them.

oem4me · 05-21-2016, 03:48 PM

Quote:

Originally Posted by djones1a

I have a factory jack,handle, tire tool,the brackets and springs for a 1966 Chevrolet truck.As far as i can tell it was never out of the truck. I live 50 miles west of St.Louis right next to interstate I-70 if any one wants it they can have it. If i have to ship it i want $40.00 for it and shipping

Next in line if larry64 doesn't pan out.

Grizz1963 · 05-21-2016, 05:14 PM

Quote:

Originally Posted by djones1a

No i don't think they would work on a nascar truck frame,might as well let someone have them that could use them.

LOL !!!!!

You mean like this......??

Through the day I was chatting with my friend Dennis in Missouri as he had not slept all night after having a medical procedure done yesterday.

He was at the body shop early, painted some NASCAR truck parts up, then continued with his little side project.

A 66 C10 onto a NASCAR frame and chassis.

This was his first run, and will be used on a different project later.

Today he was working on the final build unit.

Fortunately he knows a decent body shop guy.......

Really nice when you have a load, and I mean a load of NASCAR truck parts free to use.

Tomorrow may be a wash out for boot fair.

Still,,there will be truck time.

jteck10 · 05-22-2016, 12:02 AM

Got a bumper I just swapped out from my '62 gmc if anyone wants it. I'm in the Bay Area for local pickup. Kinda bent but if you're able to bend it back could be worth it to ya. License plate not included

**jayoldschool** · 05-22-2016, 08:38 PM

Damn, that would be perfect on my truck.

jteck10 · 05-23-2016, 12:34 PM

Quote:

Originally Posted by jayoldschool

Damn, that would be perfect on my truck.

i dont mind getting it to ya if you can figure a way to ship it lol

62stepside longbox · 05-25-2016, 10:47 PM

No picture right now but I have a full torsion bar front suspension that I don't need. I'll have it out of the truck in the next month or so. Nothing is damaged, worked fine. Pickup is really the only way since it's so large and shipping would cost a fortune.

Ronzo · 05-25-2016, 11:28 PM

Nice of you Nik.

62stepside longbox · 05-26-2016, 01:21 AM

Quote:

Originally Posted by Ronzo

Nice of you Nik.

Well Ron I figured that someone else may need it for parts and I have no use for it. Do you think Steve may want it? as he is still running the original torsion front end and he lives fairly close to me.

Johns66 · 05-28-2016, 07:15 PM

64-66 steering tube and inner shaft assembly:

FREE pay shipping from Waco, Texas 76712

sampsmit000 · 05-28-2016, 08:42 PM

What kind of shape is it in?

Johns66 · 05-28-2016, 09:58 PM

Very good it's been powdercoated.

**chevy2tom** · 05-28-2016, 10:37 PM

Quote:

Originally Posted by Johns66

64-66 steering tube and inner shaft assembly:

FREE pay shipping from Waco, Texas 76712

I sure could use that my tube is missing the tabs on the turn siginal switch side shipping to 60090 Illinois please

Johns66 · 05-29-2016, 12:19 AM

Ok I will get you a price on shipping, it may be Tuesday due to the holiday.

Johns66 · 05-29-2016, 12:28 AM

Very good it's been powdercoated.

**chevy2tom** · 05-29-2016, 08:26 AM

Ok, thank you

aggie91 · 05-31-2016, 08:51 AM

If chevy2tom passes on the column, I'll take it. I will be in Waco next Saturday and could meet you to pick it up. I just went thru Waco twice this weekend...

Thanks!

**chevy2tom** · 06-01-2016, 08:46 AM

Any chance you have a shipping quote for the steering tube?

05-01-2016, 08:20 PM	#251
dodgiesdad Registered User Join Date: Nov 2010 Location: Indiana, PA Posts: 220	Re: The 60-66 "PAYING IT FORWARD" thread! Mounting clips for side trim on a short bed fleet side. Ship on your dime, take some or all. I just added the side trim to my truck. As it did not originally have the side trim I was not drilling holes in the sides, so I put it in with plastic strips and double sided tape. Attached Images

05-06-2016, 12:15 PM	#253
dodgiesdad Registered User Join Date: Nov 2010 Location: Indiana, PA Posts: 220	Re: The 60-66 "PAYING IT FORWARD" thread! ChiefRocka, they are yours, PM me you address we will figure out getting them to you.

05-09-2016, 08:50 PM	#254
T2vigil Registered User Join Date: Jan 2010 Location: Evensville, TN Posts: 236	Re: The 60-66 "PAYING IT FORWARD" thread! I picked up a couple of "Oldsmobile" radios as part of an estate sale. They appear to be mid 60's. But I am like the Sgt. - "I know Nothing". Free to a good home. I live in SE TN, Dayton. PM me if you are interested.

05-20-2016, 07:07 PM	#255
djones1a Registered User Join Date: Aug 2015 Location: wright city mo. Posts: 18	Re: The 60-66 "PAYING IT FORWARD" thread! I have a factory jack,handle, tire tool,the brackets and springs for a 1966 Chevrolet truck.As far as i can tell it was never out of the truck. I live 50 miles west of St.Louis right next to interstate I-70 if any one wants it they can have it. If i have to ship it i want $40.00 for it and shipping

05-20-2016, 08:46 PM	#256
Larry64 Registered User Join Date: Sep 2011 Location: Lewisburg, TN Posts: 315	Re: The 60-66 "PAYING IT FORWARD" thread! Ill take it. Shipped to 37091. Send me the payment info in a pm. __________________ Never drive faster than your Guardian Angel can fly Larry

05-21-2016, 02:46 PM	#258
djones1a Registered User Join Date: Aug 2015 Location: wright city mo. Posts: 18	Re: The 60-66 "PAYING IT FORWARD" thread! No i don't think they would work on a nascar truck frame,might as well let someone have them that could use them.

05-22-2016, 12:02 AM	#261
jteck10 Registered User Join Date: Aug 2015 Location: Bay Area, CA Posts: 94	Re: The 60-66 "PAYING IT FORWARD" thread! Got a bumper I just swapped out from my '62 gmc if anyone wants it. I'm in the Bay Area for local pickup. Kinda bent but if you're able to bend it back could be worth it to ya. License plate not included Attached Images __________________ 1962 GMC 2500 3/4 ton longbed stepside (currently w/flatbed), 4 on the floor, 305-V6-5.0L

05-22-2016, 08:38 PM	#262
jayoldschool Moderator Join Date: Dec 2012 Location: ON, Canada Posts: 2,169	Re: The 60-66 "PAYING IT FORWARD" thread! Damn, that would be perfect on my truck.

05-25-2016, 10:47 PM	#264
62stepside longbox Registered User Join Date: Aug 2015 Location: Kelowna, B.C, Canada Posts: 1,747	Re: The 60-66 "PAYING IT FORWARD" thread! No picture right now but I have a full torsion bar front suspension that I don't need. I'll have it out of the truck in the next month or so. Nothing is damaged, worked fine. Pickup is really the only way since it's so large and shipping would cost a fortune. __________________ Nik...................____ 62 lwb c10 step-side 261 5 spd .........________//__{\_____ ,,,,,,,/__(O)___//___/__(O)_/ my build thread. Sending unit solution

05-25-2016, 11:28 PM	#265
Ronzo Registered User Join Date: Jul 2014 Location: Ft Whoopup, Ab Posts: 317	Re: The 60-66 "PAYING IT FORWARD" thread! Nice of you Nik.

05-28-2016, 07:15 PM	#267
Johns66 Registered User Join Date: Mar 2013 Location: Waco, Texas Posts: 411	Re: The 60-66 "PAYING IT FORWARD" thread! 64-66 steering tube and inner shaft assembly: FREE pay shipping from Waco, Texas 76712 Attached Images

05-28-2016, 08:42 PM	#268
sampsmit000 Registered User Join Date: Dec 2015 Location: Lehi,Utah Posts: 213	Re: The 60-66 "PAYING IT FORWARD" thread! What kind of shape is it in? __________________ 1964 Chevy Factory K10 Short Bed Mitchell Sampson

05-28-2016, 09:58 PM	#269
Johns66 Registered User Join Date: Mar 2013 Location: Waco, Texas Posts: 411	Re: The 60-66 "PAYING IT FORWARD" thread! Very good it's been powdercoated.

05-29-2016, 12:19 AM	#271
Johns66 Registered User Join Date: Mar 2013 Location: Waco, Texas Posts: 411	Re: The 60-66 "PAYING IT FORWARD" thread! Ok I will get you a price on shipping, it may be Tuesday due to the holiday.

05-29-2016, 12:28 AM	#272
Johns66 Registered User Join Date: Mar 2013 Location: Waco, Texas Posts: 411	Re: The 60-66 "PAYING IT FORWARD" thread! Very good it's been powdercoated.



Register or Log In To remove these advertisements.

05-29-2016, 08:26 AM	#273
chevy2tom Senior Member Join Date: Aug 2009 Location: Wheeling, Illinois Posts: 703	Re: The 60-66 "PAYING IT FORWARD" thread! Ok, thank you

05-31-2016, 08:51 AM	#274
aggie91 I'm just glad to be here! Join Date: Jan 2008 Location: Longview, TX Posts: 4,788	Re: The 60-66 "PAYING IT FORWARD" thread! If chevy2tom passes on the column, I'll take it. I will be in Waco next Saturday and could meet you to pick it up. I just went thru Waco twice this weekend... Thanks! __________________ Karl 1965 Chevy Stepside(Grandpa's Old Blue) and (July 2015 Shop Build!)(2020, the Saga Continues) http://67-72chevytrucks.com/vboard/s...d.php?t=372424 The LST Challenge: http://67-72chevytrucks.com/vboard/s...=1#post7812257 Korbin's 1st Square: "Sunburn" http://67-72chevytrucks.com/vboard/s...d.php?t=418618 1985 GMC Sierra: "White Trash", Korbin's 2nd now... http://67-72chevytrucks.com/vboard/s...d.php?t=632305 Henry - 1984 Chevrolet, Owen's 1st Square

06-01-2016, 08:46 AM	#275
chevy2tom Senior Member Join Date: Aug 2009 Location: Wheeling, Illinois Posts: 703	Re: The 60-66 "PAYING IT FORWARD" thread! Any chance you have a shipping quote for the steering tube?

Register or Log In To remove these advertisements.