1950 Chevy 3600 - Bumper Punchin' - Page 11 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

IvelDesigns · 05-08-2009, 08:33 AM

Quote:

Originally Posted by jott_06

Do you plan to gusset or reinforce the upper bag mounts any? I'm just curious because they will have a lot of weight riding on them and i'd hate so see them bend or break.

They are gusseted from the bottom. I do plan to keep an eye on them when i get it on the ground to see how much they flex. If needed, i'll come up with some sort of gusset for them on top.

patrickk1 · 05-08-2009, 11:02 AM

What brand/model of bags are you running on the frontend?

72-c20 · 05-08-2009, 11:19 AM

Quote:

Originally Posted by IvelDesigns

it's a 22gal cell from speedway motors: http://www.speedwaymotors.com/Steel-...Cells,447.html

It's the 25" wide one.

ahh. it looked huge to me... I put a 17 gal one in my off-roader, but it's tall and skinny (7" wide) and sunk into the floor 6"...
http://www.indysworld.com/subaru/bra.../fuel-cell.jpg

IvelDesigns · 05-08-2009, 11:38 AM

Quote:

Originally Posted by patrickk1

What brand/model of bags are you running on the frontend?

slam specialties RE6's up front and RE7's out back.

jott_06 · 05-08-2009, 12:12 PM

oh ok. I couldnt tell it was gusseted from the pics. By the way, trucks looking good. I love any truck thats on the ground.

**Dieselwrencher** · 05-12-2009, 10:17 PM

Well Levi, it is looking awesome! Now I'm going to derail your thread for a little enthusiasm. LOL

[IMG]http://i181.photobucket.com/albums/x155/Diese...

**Dieselwrencher** · 05-12-2009, 10:19 PM

And this is in KY last weekend.

Ok, I'm done derailing your thread. LOL I figuired since we never met up, I would show you this way. LOL

IvelDesigns · 05-13-2009, 09:00 AM

wow man. looks bad ass. I'm heading to newton tonight to pick up my brake pedal from bob (he bent it for me so my fat foot could get to the gas pedal). we were going to do the cruise in, but the weather looks crappy as of right now.

i'll give you a ring on my way back and swing by. PM me your addy if you can and i'll google map it. And how late is too late?

**70C10Toejam** · 05-14-2009, 11:29 PM

Finally got to stop in Saturday and check on the progress. Is looking good. Tried to lend a hand, but wasn't a whole lot of need for a 3rd one, except to pass some tools back and forth.

How'd the air tank mounts come out? Find a final size for the batteries???

IvelDesigns · 05-15-2009, 12:25 AM

tried to fire it up tonight! but, the starter needs shimmed and i can't find my shims. So, tomorrow another parts run. I know i'm getting lazy with the pics, but it's crunch time and i want to get this done. If the stars align, the moon is, umm, out, and nothing goes wrong, it will be out of the garage this sunday.

*crosses fingers*

**Dieselwrencher** · 05-15-2009, 05:01 PM

Sweet! Nice to hear Levi! Good luck man!

IvelDesigns · 05-16-2009, 02:05 AM

ok, so the only thing that aligned so far this weekend is my wallet to the trash pile.

Long story is here: http://67-72chevytrucks.com/vboard/s....php?p=3312258

short story is i fried my ididit column and have to wait until next week to get a replacement.

on a brighter note, i got my gauges all wired up and nearly mounted. You're going to dig how i decided to mount them. tooks lots of pics and plan to do a write up on it.

IvelDesigns · 05-18-2009, 12:21 AM

It's ALIVE!

fired it up for the first time this afternoon and man does it sound good! especially just running headers. first couple tried had no luck, but then we found that the plug wires weren't right and the dizzy was 2 teeth off. 10 min later and a little gas down the carb and it was all good.

the front clip is mounted, radiator and fan mounted and wired, trans cooler is done, drive shaft in, gauges are mounted, air tank and compressors are mounted and i got my air manifolds built. The TODO list is still fairly long before i can leave the drive way, but it will definitely be on the road by the end of this weekend. if not sooner.

needless to say, i was smiling ear to ear when it fired.

GRIMSS · 05-18-2009, 07:07 AM

Can't wait to see and hear it.

my67chevytruck · 05-18-2009, 10:18 AM

TEASE!!!! not fair!! Glad to hear of your forward progress.

**Dieselwrencher** · 05-18-2009, 10:42 PM

Sorry to hear about the issues and your column Levi. If it was too easy, you should know something wasn't right! LOL I'm glad to see you making your goal date of next week as well.

IvelDesigns · 05-19-2009, 01:04 AM

sorry guys, but forum uploads will have to do for tonight. brake and air lines should be buttoned up tomorrow along with a list of other items.

did i mention today was my anniversary? I have such a sweet and loving wife that she gave me a rain check on the dinner we were planning to do.

and now the pics!

my67chevytruck · 05-19-2009, 07:00 AM

looking good, keep at it...

Slick67 · 05-19-2009, 03:55 PM

Clean bag settup. Looking great, cool wife too! Not many are gonna let ya slide on the anniversary!!

VA72C10 · 05-19-2009, 03:58 PM

Looks awesome!

IvelDesigns · 05-19-2009, 04:17 PM

once i get sheet metal on all of the rear, the bags will be really clean then. all you'll see is the two inlets, and then 4 3/8" lines that go straight down into the sheet metal (w/ grommets). from there they will route to the bags. you also won't see any of the valves either. that won't happen for a while though.

lyrikz · 05-19-2009, 05:05 PM

Quote:

Originally Posted by IvelDesigns

once i get sheet metal on all of the rear, the bags will be really clean then. all you'll see is the two inlets, and then 4 3/8" lines that go straight down into the sheet metal (w/ grommets). from there they will route to the bags. you also won't see any of the valves either. that won't happen for a while though.

Is it going to make the memorial day deadline? Cant believe i missed this thread. SO AWESOME.

**Dieselwrencher** · 05-20-2009, 12:07 AM

Quote:

Originally Posted by lyrikz

Is it going to make the memorial day deadline? Cant believe i missed this thread. SO AWESOME.

He has made a lot of progress in such short time. Keep up the great work Levi!

72BlckButy · 05-20-2009, 07:25 AM

The setup looks good Levi, keep at it!

IvelDesigns · 05-24-2009, 01:02 AM

I'll post more details on the adventures of this weekend once the weekend is over. But for now, i can tell you that i made the first shake down run to the gas station... and made it back home. clearly i have a couple leaks to take care of.

05-08-2009, 11:02 AM	#252
patrickk1 Registered User Join Date: Apr 2009 Location: Billerica, Ma Posts: 197	Re: 1950 Chevy 3600 - Bumper Punchin' What brand/model of bags are you running on the frontend?

05-08-2009, 12:12 PM	#255
jott_06 Camaro Club Join Date: Jun 2007 Location: ohio Posts: 472	Re: 1950 Chevy 3600 - Bumper Punchin' oh ok. I couldnt tell it was gusseted from the pics. By the way, trucks looking good. I love any truck thats on the ground.

05-12-2009, 10:19 PM	#257
Dieselwrencher 6>8 Plugless........ Join Date: Sep 2007 Location: Prairie City, Ia Posts: 17,139	Re: 1950 Chevy 3600 - Bumper Punchin' And this is in KY last weekend. Ok, I'm done derailing your thread. LOL I figuired since we never met up, I would show you this way. LOL __________________ Ryan 1972 Chevy Longhorn K30 Cheyenne Super, 359 Inline 6 cylinder, Auto Trans, Tilt, Diesel Tach/Vach, Buckets, Rare Rear 4-link and air ride option Build Thread 1972 GMC Sierra Grande Longhorn 4x4 1972 Chevy Cheyenne Super K20 Long Step side tilt, tach, tow hooks, AC, 350 4 speed 1972 C10 Suburban Custom Deluxe 1969 Chevy milk truck 1971 Camaro RS 5.3 BTR STG3 Cam Super T10 1940 Ford 354 Hemi 46RH Ford 9" on air ride huge project *Tired of spark plugs? Check this out.*

05-13-2009, 09:00 AM	#258
IvelDesigns Commander Taco Bello Join Date: Sep 2006 Location: Des Moines, Iowa Posts: 2,232	Re: 1950 Chevy 3600 - Bumper Punchin' wow man. looks bad ass. I'm heading to newton tonight to pick up my brake pedal from bob (he bent it for me so my fat foot could get to the gas pedal). we were going to do the cruise in, but the weather looks crappy as of right now. i'll give you a ring on my way back and swing by. PM me your addy if you can and i'll google map it. And how late is too late? __________________ Bagged '50 3600 - Bumper punchin' road kill since 2009... Bagged '69 C10 Longbed - Bumper punchin' road kill since 2007...

05-14-2009, 11:29 PM	#259
70C10Toejam Hellasick Join Date: Jul 2006 Location: Death Moans, IA Posts: 876	Re: 1950 Chevy 3600 - Bumper Punchin' Finally got to stop in Saturday and check on the progress. Is looking good. Tried to lend a hand, but wasn't a whole lot of need for a 3rd one, except to pass some tools back and forth. How'd the air tank mounts come out? Find a final size for the batteries??? __________________ I keep two MAGNUMS in my desk. One's a gun, and I keep it loaded. The other's a bottle and it keeps ME loaded. I'm Tracer Bullet. (Calvin and Hobbes) This life was a test. It was only a test. If this had been an actual life, you would have received instructions on where to go and what to do. RED meat is not bad for you...FUZZY BLUE/GREEN MEAT is bad for you!!!!!!!!!!!!! BUILT FORD TOUGH WITH CHEVY STUFF--sticker at Goodguys

05-15-2009, 12:25 AM	#260
IvelDesigns Commander Taco Bello Join Date: Sep 2006 Location: Des Moines, Iowa Posts: 2,232	Re: 1950 Chevy 3600 - Bumper Punchin' tried to fire it up tonight! but, the starter needs shimmed and i can't find my shims. So, tomorrow another parts run. I know i'm getting lazy with the pics, but it's crunch time and i want to get this done. If the stars align, the moon is, umm, out, and nothing goes wrong, it will be out of the garage this sunday. crosses fingers __________________ Bagged '50 3600 - Bumper punchin' road kill since 2009... Bagged '69 C10 Longbed - Bumper punchin' road kill since 2007...

05-15-2009, 05:01 PM	#261
Dieselwrencher 6>8 Plugless........ Join Date: Sep 2007 Location: Prairie City, Ia Posts: 17,139	Re: 1950 Chevy 3600 - Bumper Punchin' Sweet! Nice to hear Levi! Good luck man! __________________ Ryan 1972 Chevy Longhorn K30 Cheyenne Super, 359 Inline 6 cylinder, Auto Trans, Tilt, Diesel Tach/Vach, Buckets, Rare Rear 4-link and air ride option Build Thread 1972 GMC Sierra Grande Longhorn 4x4 1972 Chevy Cheyenne Super K20 Long Step side tilt, tach, tow hooks, AC, 350 4 speed 1972 C10 Suburban Custom Deluxe 1969 Chevy milk truck 1971 Camaro RS 5.3 BTR STG3 Cam Super T10 1940 Ford 354 Hemi 46RH Ford 9" on air ride huge project *Tired of spark plugs? Check this out.*

05-16-2009, 02:05 AM	#262
IvelDesigns Commander Taco Bello Join Date: Sep 2006 Location: Des Moines, Iowa Posts: 2,232	Re: 1950 Chevy 3600 - Bumper Punchin' ok, so the only thing that aligned so far this weekend is my wallet to the trash pile. Long story is here: http://67-72chevytrucks.com/vboard/s....php?p=3312258 short story is i fried my ididit column and have to wait until next week to get a replacement. on a brighter note, i got my gauges all wired up and nearly mounted. You're going to dig how i decided to mount them. tooks lots of pics and plan to do a write up on it. __________________ Bagged '50 3600 - Bumper punchin' road kill since 2009... Bagged '69 C10 Longbed - Bumper punchin' road kill since 2007...

05-18-2009, 12:21 AM	#263
IvelDesigns Commander Taco Bello Join Date: Sep 2006 Location: Des Moines, Iowa Posts: 2,232	Re: 1950 Chevy 3600 - Bumper Punchin' It's ALIVE! fired it up for the first time this afternoon and man does it sound good! especially just running headers. first couple tried had no luck, but then we found that the plug wires weren't right and the dizzy was 2 teeth off. 10 min later and a little gas down the carb and it was all good. the front clip is mounted, radiator and fan mounted and wired, trans cooler is done, drive shaft in, gauges are mounted, air tank and compressors are mounted and i got my air manifolds built. The TODO list is still fairly long before i can leave the drive way, but it will definitely be on the road by the end of this weekend. if not sooner. needless to say, i was smiling ear to ear when it fired. __________________ Bagged '50 3600 - Bumper punchin' road kill since 2009... Bagged '69 C10 Longbed - Bumper punchin' road kill since 2007...

05-18-2009, 07:07 AM	#264
GRIMSS --------------- Join Date: Mar 2008 Location: Central Missouri Posts: 1,791	Re: 1950 Chevy 3600 - Bumper Punchin' Can't wait to see and hear it. __________________ 2001 GMC SIERRA 1956 Chevy Panel *Build Page* with a Scott's Hotrods IFS 1953 Chevy trucks *Project Dime Time* 1968 Camaro 1968 Volksrod "NOBACK" 55-59 one piece window *Video* 55-59 one piece window *template files* Jared

05-18-2009, 10:18 AM	#265
my67chevytruck Under Construction Join Date: Oct 2007 Location: Midlothian,TX (DFW) Posts: 4,555	Re: 1950 Chevy 3600 - Bumper Punchin' TEASE!!!! not fair!! Glad to hear of your forward progress. __________________ Heath subscribe to the board here: http://67-72chevytrucks.com/vboard/payments.php http://67-72chevytrucks.com/vboard/s...d.php?t=157669 FAQ how to's 1956 Chevy Apache 1967 C10 SWB FleetSide (under construction) 1969 K10 SWB FleetSide (Future Build) 1972 C10 SWB Stepside (Future Build) 56 chevy truck : http://www.cardomain.com/ride/2955823/1 67 truck build: http://www.67-72chevytrucks.com/vboard/showthread.php?t=281357/1 69 k10: http://67-72chevytrucks.com/vboard/s...d.php?t=389470

05-18-2009, 10:42 PM	#266
Dieselwrencher 6>8 Plugless........ Join Date: Sep 2007 Location: Prairie City, Ia Posts: 17,139	Re: 1950 Chevy 3600 - Bumper Punchin' Sorry to hear about the issues and your column Levi. If it was too easy, you should know something wasn't right! LOL I'm glad to see you making your goal date of next week as well. __________________ Ryan 1972 Chevy Longhorn K30 Cheyenne Super, 359 Inline 6 cylinder, Auto Trans, Tilt, Diesel Tach/Vach, Buckets, Rare Rear 4-link and air ride option Build Thread 1972 GMC Sierra Grande Longhorn 4x4 1972 Chevy Cheyenne Super K20 Long Step side tilt, tach, tow hooks, AC, 350 4 speed 1972 C10 Suburban Custom Deluxe 1969 Chevy milk truck 1971 Camaro RS 5.3 BTR STG3 Cam Super T10 1940 Ford 354 Hemi 46RH Ford 9" on air ride huge project *Tired of spark plugs? Check this out.*

05-19-2009, 01:04 AM	#267
IvelDesigns Commander Taco Bello Join Date: Sep 2006 Location: Des Moines, Iowa Posts: 2,232	Re: 1950 Chevy 3600 - Bumper Punchin' sorry guys, but forum uploads will have to do for tonight. brake and air lines should be buttoned up tomorrow along with a list of other items. did i mention today was my anniversary? I have such a sweet and loving wife that she gave me a rain check on the dinner we were planning to do. and now the pics! Attached Images __________________ Bagged '50 3600 - Bumper punchin' road kill since 2009... Bagged '69 C10 Longbed - Bumper punchin' road kill since 2007...

05-19-2009, 07:00 AM	#268
my67chevytruck Under Construction Join Date: Oct 2007 Location: Midlothian,TX (DFW) Posts: 4,555	Re: 1950 Chevy 3600 - Bumper Punchin' looking good, keep at it... __________________ Heath subscribe to the board here: http://67-72chevytrucks.com/vboard/payments.php http://67-72chevytrucks.com/vboard/s...d.php?t=157669 FAQ how to's 1956 Chevy Apache 1967 C10 SWB FleetSide (under construction) 1969 K10 SWB FleetSide (Future Build) 1972 C10 SWB Stepside (Future Build) 56 chevy truck : http://www.cardomain.com/ride/2955823/1 67 truck build: http://www.67-72chevytrucks.com/vboard/showthread.php?t=281357/1 69 k10: http://67-72chevytrucks.com/vboard/s...d.php?t=389470

05-19-2009, 03:55 PM	#269
Slick67 Sofa King Crazy!! Join Date: Oct 2008 Location: Houston, TX Posts: 3,090	Re: 1950 Chevy 3600 - Bumper Punchin' Clean bag settup. Looking great, cool wife too! Not many are gonna let ya slide on the anniversary!! __________________ You found the Tater. *My Blazer Build (New)* - http://67-72chevytrucks.com/vboard/s...d.php?t=654650 *My 67 Build* - http://67-72chevytrucks.com/vboard/s...d.php?t=335650 67 Chevy LWB big window a/c AKA TOTALLED BY A JACKASS. 1972 2wd Blazer "Porterbuilt and Sloshed"



Register or Log In To remove these advertisements.

05-19-2009, 03:58 PM	#270
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,269	Re: 1950 Chevy 3600 - Bumper Punchin' Looks awesome! __________________ Looking for a 67-72 swb or blazer project in or around VA.

05-19-2009, 04:17 PM	#271
IvelDesigns Commander Taco Bello Join Date: Sep 2006 Location: Des Moines, Iowa Posts: 2,232	Re: 1950 Chevy 3600 - Bumper Punchin' once i get sheet metal on all of the rear, the bags will be really clean then. all you'll see is the two inlets, and then 4 3/8" lines that go straight down into the sheet metal (w/ grommets). from there they will route to the bags. you also won't see any of the valves either. that won't happen for a while though. __________________ Bagged '50 3600 - Bumper punchin' road kill since 2009... Bagged '69 C10 Longbed - Bumper punchin' road kill since 2007...

05-20-2009, 07:25 AM	#274
72BlckButy Tot Roddin' Join Date: Apr 2005 Location: Mid-MO Posts: 24,461	Re: 1950 Chevy 3600 - Bumper Punchin' The setup looks good Levi, keep at it! __________________ -Nate 1969 CST SWB - Project Blank Slate (4.5/6" ECE Static Drop, 6-lug disc brake upgrade (manual), Billet Specialties Vintec 20x8.5 255/40 (F) 20x10 295/40 (R), 250 I-6) 1960 AMF Skylark - Tot Roddin' (Lowered with custom frame; soon to include custom push bar and interior) 2008 Silverado CrewCab 1LT (5.3L, 3:73, 4x4, LT1, Z-71, Towing Package)

05-24-2009, 01:02 AM	#275
IvelDesigns Commander Taco Bello Join Date: Sep 2006 Location: Des Moines, Iowa Posts: 2,232	Re: 1950 Chevy 3600 - Bumper Punchin' I'll post more details on the adventures of this weekend once the weekend is over. But for now, i can tell you that i made the first shake down run to the gas station... and made it back home. clearly i have a couple leaks to take care of. __________________ Bagged '50 3600 - Bumper punchin' road kill since 2009... Bagged '69 C10 Longbed - Bumper punchin' road kill since 2007...

Register or Log In To remove these advertisements.