Power Brake Booster Adapter Bracket - Page 11 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

70custom20 · 07-27-2017, 05:38 PM

I saw in another thread, someone had posted a whole sheet of GM PRO numbers for brake boosters. The JM3 reads booster, brake, 240mm high flow, while the JM5 reads booster, brake, 200mm high flow. I'm not sure what difference the milometer size has to do with anything. Also, would it be better to grab one of these boosters off of a early 2000's S-10 at the junk yard, or would it be better to buy one at a local parts store like NAPA, etc??

70custom20 · 07-27-2017, 05:46 PM

I looked for an edit feature, couldn't find one. Anyway, RPO not PRO. I saw quite a few of the JM3 boosters in a local hard in early 2000's S-10 blazers. How much of a PITA are they to pull out of the truck?

MASTERBrian · 07-27-2017, 05:47 PM

Quote:

Originally Posted by 70custom20

I saw in another thread, someone had posted a whole sheet of GM PRO numbers for brake boosters. The JM3 reads booster, brake, 240mm high flow, while the JM5 reads booster, brake, 200mm high flow. I'm not sure what difference the milometer size has to do with anything. Also, would it be better to grab one of these boosters off of a early 2000's S-10 at the junk yard, or would it be better to buy one at a local parts store like NAPA, etc??

I can't answer the other questions, but if you're asking if better to buy used or new....I'd think everyone would say New. Unless your funds don't allow. Mine is from a c1500, forget the year.

**Captainfab** · 07-27-2017, 11:54 PM

Which is better, new or used, depends on your preference and budget. With a rebuilt one, you will need a core or pay the core charge. Pulling a used booster can take some time as there is quite a bit that needs to be removed before you can get to the nuts on the studs and the pushrod on the brake pedal. You will need a long extension or two and a swivel socket or a universal joint.

70custom20 · 07-28-2017, 09:26 PM

The money doesn't bother me either way. I just wasn't sure if buying one from NAPA or another parts store was better or worse, based on it seems like replacement parts are sometimes pretty ****ty these days.

MASTERBrian · 07-28-2017, 09:39 PM

Quote:

Originally Posted by 70custom20

The money doesn't bother me either way. I just wasn't sure if buying one from NAPA or another parts store was better or worse, based on it seems like replacement parts are sometimes pretty ****ty these days.

Personally I'd worry about how long the thing say and if the diagram is therefore cracked on used.

**Captainfab** · 07-28-2017, 11:48 PM

In my experience the original GM boosters can last a long time. Hook one up to engine vacuum and see if it holds vacuum. If so, the diaphram is good.

n3xb360 · 08-09-2017, 03:03 AM

I was wondering if you ship internationally? And how much it is for the 67-72 booster bracket with hydraulic clutch conversation

**Captainfab** · 08-09-2017, 11:13 PM

Yes I ship worldwide. The price for the '67-'68 or '69-'72 booster bracket with the hydraulic clutch conversion is exactly the same as in post #1 of the for sale thread seen here.

http://www.67-72chevytrucks.com/vboa...d.php?t=652871

Shipping that large box to Canada is quite expensive. The shipping alone is about $64.00 USD. Many of my Canadian customers have a delivery address just this side of the border.

Quote:

Originally Posted by n3xb360

I was wondering if you ship internationally? And how much it is for the 67-72 booster bracket with hydraulic clutch conversation

69ChevyCST · 08-23-2017, 08:28 AM

Being a fabricator I was a little hesitant to buy something I could make myself with a little effort. I received my adapter bracket (powder coated) in the mail and was very impressed with the quality of the bracket. Packaging, weld and powder coat quality was second to none. Thanks for supplying a quality product!

James McGrew
Owner
Madison Street Hot Rods

**Captainfab** · 08-23-2017, 10:57 PM

Thank you for the compliments and I appreciate the purchase

beaterku · 08-30-2017, 11:37 AM

I'm interested in this bracket. It makes for a very clean setup. I do have a question. I have a factory tilt column that I bought from Kevsclassics. Looking at where the shift arm is in relation to the center-line of the brake push rod, an 8" dual booster might be a tight fit.

Can anyone confirm that an 8" dual booster such as the Inline Tubing unit http://r.ebay.com/dYzdyl will fit with the factory tilt column shift arm?

Thanks!

**Captainfab** · 08-30-2017, 11:19 PM

From what info I have received from a couple past customers, you must use a booster that is smaller than 10" in diameter. If it were me, I would go with a 9-9.5" diameter dual diaphram booster.

Quote:

Originally Posted by beaterku

I'm interested in this bracket. It makes for a very clean setup. I do have a question. I have a factory tilt column that I bought from Kevsclassics. Looking at where the shift arm is in relation to the center-line of the brake push rod, an 8" dual booster might be a tight fit.

Can anyone confirm that an 8" dual booster such as the Inline Tubing unit http://r.ebay.com/dYzdyl will fit with the factory tilt column shift arm?

Thanks!

Mikem_72 · 09-27-2017, 11:23 PM

Captainfab,

Received my bracket today, thank you for the speedy delivery and a beautiful product. I'll post pictures of it installed after paint. Thank you again!!

Mikem_72 · 10-11-2017, 04:48 PM

Quote:

Originally Posted by Mikem_72

Captainfab,

Received my bracket today, thank you for the speedy delivery and a beautiful product. I'll post pictures of it installed after paint. Thank you again!!

Finally got everything mounted, thanks again Captainfab!!

**Captainfab** · 10-12-2017, 12:16 AM

Thanks for posting a couple pics.

**Captainfab** · 10-17-2017, 11:55 PM

All of my booster brackets now come with slotted booster mounting holes to also accept aftermarket universal boosters with the 2-3/8" x 2-3/8" center to center mounting studs.

gringoloco · 11-28-2017, 04:36 PM

PayPal sent for powder coated bracket. Thanks!

**Captainfab** · 11-29-2017, 12:55 AM

PM sent

Quote:

Originally Posted by gringoloco

PayPal sent for powder coated bracket. Thanks!

**rob32472** · 12-28-2017, 09:24 PM

Pay pal sent

**Captainfab** · 12-29-2017, 12:19 AM

Payment received for a powder coated standard '67-'72 booster bracket.

Quote:

Originally Posted by rob32472

Pay pal sent

**Captainfab** · 01-10-2018, 01:04 AM

I am officially notifying everyone that I will be on vacation from 02-05-18 thru 02-13-18. I will do my best to get all orders built and shipped before I leave, if placed by 01-31-18. Orders placed while I am gone will be built and shipped in order of receipt of payment once I return. Thanks for understanding.

Cheyenne1970 · 02-18-2018, 11:42 PM

Hello I would like to purchase an adapter bracket, how much would it cost for a powder coated one shipped to 92870?

**Captainfab** · 02-19-2018, 01:01 AM

The price is Exactly the same as in post #1 of this for sale thread........$77.65

Quote:

Originally Posted by Cheyenne1970

Hello I would like to purchase an adapter bracket, how much would it cost for a powder coated one shipped to 92870?

Cheyenne1970 · 02-19-2018, 01:06 AM

Sorry I forgot ask about the hydroboost mount plate as well

07-27-2017, 05:38 PM	#251
70custom20 Registered User Join Date: Dec 2007 Location: Quakertown Pa. Posts: 119	Re: Power Brake Booster Adapter Bracket I saw in another thread, someone had posted a whole sheet of GM PRO numbers for brake boosters. The JM3 reads booster, brake, 240mm high flow, while the JM5 reads booster, brake, 200mm high flow. I'm not sure what difference the milometer size has to do with anything. Also, would it be better to grab one of these boosters off of a early 2000's S-10 at the junk yard, or would it be better to buy one at a local parts store like NAPA, etc??

07-27-2017, 05:46 PM	#252
70custom20 Registered User Join Date: Dec 2007 Location: Quakertown Pa. Posts: 119	Re: Power Brake Booster Adapter Bracket I looked for an edit feature, couldn't find one. Anyway, RPO not PRO. I saw quite a few of the JM3 boosters in a local hard in early 2000's S-10 blazers. How much of a PITA are they to pull out of the truck?

07-27-2017, 11:54 PM	#254
Captainfab 60-66 Nut Join Date: Mar 2007 Location: Coeur d'Alene, Idaho Posts: 23,250	Re: Power Brake Booster Adapter Bracket Which is better, new or used, depends on your preference and budget. With a rebuilt one, you will need a core or pay the core charge. Pulling a used booster can take some time as there is quite a bit that needs to be removed before you can get to the nuts on the studs and the pushrod on the brake pedal. You will need a long extension or two and a swivel socket or a universal joint. __________________ Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE

07-28-2017, 09:26 PM	#255
70custom20 Registered User Join Date: Dec 2007 Location: Quakertown Pa. Posts: 119	Re: Power Brake Booster Adapter Bracket The money doesn't bother me either way. I just wasn't sure if buying one from NAPA or another parts store was better or worse, based on it seems like replacement parts are sometimes pretty ****ty these days.

07-28-2017, 11:48 PM	#257
Captainfab 60-66 Nut Join Date: Mar 2007 Location: Coeur d'Alene, Idaho Posts: 23,250	Re: Power Brake Booster Adapter Bracket In my experience the original GM boosters can last a long time. Hook one up to engine vacuum and see if it holds vacuum. If so, the diaphram is good. __________________ Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE

08-09-2017, 03:03 AM	#258
n3xb360 Registered User Join Date: Nov 2014 Location: Kelowna, British Columbia Posts: 9	Re: Power Brake Booster Adapter Bracket I was wondering if you ship internationally? And how much it is for the 67-72 booster bracket with hydraulic clutch conversation

08-23-2017, 08:28 AM	#260
69ChevyCST Registered User Join Date: Feb 2011 Location: IL Posts: 1	Re: Power Brake Booster Adapter Bracket Being a fabricator I was a little hesitant to buy something I could make myself with a little effort. I received my adapter bracket (powder coated) in the mail and was very impressed with the quality of the bracket. Packaging, weld and powder coat quality was second to none. Thanks for supplying a quality product! James McGrew Owner Madison Street Hot Rods __________________ 1969 CST Short Bed - (LT4/4L60) 1974 Chevelle Laguna S-3 (406/4-Speed) 1970 Olds 442 (455/4-Speed) 1935 Chevy 3-Window Coupe (Stock)

08-23-2017, 10:57 PM	#261
Captainfab 60-66 Nut Join Date: Mar 2007 Location: Coeur d'Alene, Idaho Posts: 23,250	Re: Power Brake Booster Adapter Bracket Thank you for the compliments and I appreciate the purchase __________________ Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE

08-30-2017, 11:37 AM	#262
beaterku Registered User Join Date: Mar 2013 Location: Lenexa, KS Posts: 547	Re: Power Brake Booster Adapter Bracket I'm interested in this bracket. It makes for a very clean setup. I do have a question. I have a factory tilt column that I bought from Kevsclassics. Looking at where the shift arm is in relation to the center-line of the brake push rod, an 8" dual booster might be a tight fit. Can anyone confirm that an 8" dual booster such as the Inline Tubing unit http://r.ebay.com/dYzdyl will fit with the factory tilt column shift arm? Thanks!

09-27-2017, 11:23 PM	#264
Mikem_72 Registered User Join Date: Apr 2014 Location: Needville, Texas Posts: 67	Re: Power Brake Booster Adapter Bracket Captainfab, Received my bracket today, thank you for the speedy delivery and a beautiful product. I'll post pictures of it installed after paint. Thank you again!! __________________ -Mike 1970 C10 Stepside 350/700r4 Build: http://67-72chevytrucks.com/vboard/s...d.php?t=632707

10-12-2017, 12:16 AM	#266
Captainfab 60-66 Nut Join Date: Mar 2007 Location: Coeur d'Alene, Idaho Posts: 23,250	Re: Power Brake Booster Adapter Bracket Thanks for posting a couple pics. __________________ Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE

10-17-2017, 11:55 PM	#267
Captainfab 60-66 Nut Join Date: Mar 2007 Location: Coeur d'Alene, Idaho Posts: 23,250	Re: Power Brake Booster Adapter Bracket All of my booster brackets now come with slotted booster mounting holes to also accept aftermarket universal boosters with the 2-3/8" x 2-3/8" center to center mounting studs. __________________ Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE

11-28-2017, 04:36 PM	#268
gringoloco A guy with a truck Join Date: Sep 2005 Location: Germany, for now Posts: 5,921	Re: Power Brake Booster Adapter Bracket PayPal sent for powder coated bracket. Thanks! __________________ -Chris Instagram _elgringoloco_ '70 Short-Wide How to: Ruin a perfectly good C10 ‘70 Blazer ConversionHow To: Ruin a Perfectly Good 4wd '72 Highlander How To: Ruin a Perfectly Good K/5 (SOLD) '72 Blazer 2WD How to: Ruin a perfectly good Blazer (SOLD) '05 Yukon Daily Driven (not so stock) Yukon (SOLD) ‘07 Yukon Denali (daily) Members met list: SCOTI, darkhorse970, 67cheby, 67cheby'sGirl, klmore, porterbuilt, n2billet, Fastrucken, classicchev, Col Clank, GSFMECH, HuggerCST, Spray-Bomb, BACKYARD88, 5150, fine69, fatbass, smbrouss70, 65StreetCruiser, GAc10boy

12-28-2017, 09:24 PM	#270
rob32472 Registered User Join Date: May 2007 Location: dallas ga Posts: 1,505	Re: Power Brake Booster Adapter Bracket Pay pal sent

01-10-2018, 01:04 AM	#272
Captainfab 60-66 Nut Join Date: Mar 2007 Location: Coeur d'Alene, Idaho Posts: 23,250	Re: Power Brake Booster Adapter Bracket I am officially notifying everyone that I will be on vacation from 02-05-18 thru 02-13-18. I will do my best to get all orders built and shipped before I leave, if placed by 01-31-18. Orders placed while I am gone will be built and shipped in order of receipt of payment once I return. Thanks for understanding. __________________ Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE



Register or Log In To remove these advertisements.

02-18-2018, 11:42 PM	#273
Cheyenne1970 Registered User Join Date: Oct 2016 Location: Placentia, California Posts: 92	Re: Power Brake Booster Adapter Bracket Hello I would like to purchase an adapter bracket, how much would it cost for a powder coated one shipped to 92870?

02-19-2018, 01:06 AM	#275
Cheyenne1970 Registered User Join Date: Oct 2016 Location: Placentia, California Posts: 92	Re: Power Brake Booster Adapter Bracket Sorry I forgot ask about the hydroboost mount plate as well

Register or Log In To remove these advertisements.