Tricked-out Chevy six cylinder engines - Page 11 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

KroAutomotiveInc · 03-28-2013, 08:04 PM

Quote:

Originally Posted by T.J. MCCAULEY

Ya know, Theres nothin better than a triple carb setup on a 6 cylinder. The
only problem for me is trying to get them all ajusted evenly.

yeah cant beat the look but i say just use a 4bbl and make it easy on yourself lol!

Vernski · 03-28-2013, 10:24 PM

Quote:

Originally Posted by KroAutomotiveInc

yeah cant beat the look but i say just use a 4bbl and make it easy on yourself lol!

I put a Edelbrock 1404 manual choke on my 230 it worked good right out of the box. I set it on a Clifford hot water heated intake. The motor has a Mercrusier boat cam and pulls hard from idle on up, plus runs smooth at idle. It also has Langdon Headers. What I would like to run is two Weber 2 barrels [check this link] https://www.cliffordperformance.net/ But that will be when I win the lottery some day. I love the looks of Tri-power I had some on a old 235 but it drove me nuts trying to get 3 carbs in tune. Here is a pic of my 230...Vernski

RANDY COX · 03-29-2013, 06:37 AM

Quote:

Originally Posted by Vernski

I put a Edelbrock 1404 manual choke on my 230 it worked good right out of the box. I set it on a Clifford hot water heated intake. The motor has a Mercrusier boat cam and pulls hard from idle on up, plus runs smooth at idle. It also has Langdon Headers. What I would like to run is two Weber 2 barrels [check this link] https://www.cliffordperformance.net/ But that will be when I win the lottery some day. I love the looks of Tri-power I had some on a old 235 but it drove me nuts trying to get 3 carbs in tune. Here is a pic of my 230...Vernski

Vernski,I really Like your truck the engine looks AWESOME,Yrs ago my brother got an old boat it had a 250 six in it,I took it out rebuilt the head on it had it sittin on an stand got me a offenhauser 4-barrell intake and an holley carb,and all hooked up to radiator and let it run to make sure there were no cracks,the engine still had the crosshatch pattern inside of cylinder walls.This was gonna be a candidate for my burb if i needed it,but sold burb yrs ago,still have engine,with the marine cam I bet it would be a good pullin motor,Oh well maybe one day I'll use it...

gimmy 64 · 03-29-2013, 08:14 PM

Quote:

Originally Posted by Vernski

I put a Edelbrock 1404 manual choke on my 230 it worked good right out of the box. I set it on a Clifford hot water heated intake. The motor has a Mercrusier boat cam and pulls hard from idle on up, plus runs smooth at idle. It also has Langdon Headers. What I would like to run is two Weber 2 barrels [check this link] https://www.cliffordperformance.net/ But that will be when I win the lottery some day. I love the looks of Tri-power I had some on a old 235 but it drove me nuts trying to get 3 carbs in tune. Here is a pic of my 230...Vernski

DANG Vernski with the new paint job an this motor i figure i will be seeing your'e truck in classics trucks soon !!!!!!!

KroAutomotiveInc · 03-28-2013, 11:47 PM

that is one sweet 230 Vernski you gotta take me for a ride some day!

**slepysal** · 03-29-2013, 12:54 AM

thats sweet Vernski, were did you get your breather cap ?

**TJ's Chevy** · 03-29-2013, 12:56 AM

That is one awsome 6 cylinder ya got there! Wish mine looked like it.

**TJ's Chevy** · 03-29-2013, 01:13 AM

Has anybody here ever used the lump port head? And a good cam ta go with
it? I almost made a big mistake in cam selection! Never do that!

Vernski · 03-29-2013, 02:07 AM

Quote:

Originally Posted by slepysal

thats sweet Vernski, were did you get your breather cap ?

I bought the breather cap at either Speedway or Jegs been awhile since I picked it up, oldtimers you know...Vernski

[KRO & TJ] thanks for the thumbs up on the truck...Vernski

[slepysal]

KroAutomotiveInc · 03-29-2013, 05:24 PM

i was wrong 292's started production in 1962 didnt know that!

**TJ's Chevy** · 03-29-2013, 06:09 PM

Quote:

Originally Posted by KroAutomotiveInc

i was wrong 292's started production in 1962 didnt know that!

I thought that the 292 came out 1963!

KroAutomotiveInc · 03-29-2013, 05:26 PM

i guess the chart shows it in all years tho interesting

gofastnut · 04-04-2013, 09:43 PM

Sweet Sixes guys!! Can't wait to get to building mine!!

**chevy_man5** · 04-04-2013, 11:00 PM

Planning on working on the new 292 this weekend. My son wants to go with the dark green. Any one have any pictures?
Posted via Mobile Device

**TJ's Chevy** · 04-05-2013, 11:00 AM

Quote:

Originally Posted by chevy_man5

Planning on working on the new 292 this weekend. My son wants to go with the dark green. Any one have any pictures?
Posted via Mobile Device

If you log on to 1960-1966 chevy trucks. com I am sure there would be some
6 cylinders that are green, If you dont mind a green V8, I believe I saw one on
their.

You may even find a dark green truck!

Anyway there should be
plenty of photos on that sight. If you asked me 47 Years ago I woulda given you
a picture of mine, but lately my truck got a little rusty

!

**chevy_man5** · 04-05-2013, 11:12 AM

If I had been around 47 years ago, I would have definitely asked! LOL as it is, my dad would have been 11 then. LOL

I have been looking online to see if I could find a dark green, but not much luck so far. I will try that site specifically though. Thanks!

**TJ's Chevy** · 04-05-2013, 11:16 AM

Quote:

Originally Posted by chevy_man5

If I had been around 47 years ago, I would have definitely asked! LOL as it is, my dad would have been 11 then. LOL

I have been looking online to see if I could find a dark green, but not much luck so far. I will try that site specifically though. Thanks!

Hope it works for ya, Chevy Man! Chevy rocks!

**slepysal** · 04-25-2013, 05:59 PM

I have an edlebrock 500 at home I plan on rebuilding it and seeing how it works !

Nivlac57 · 04-26-2013, 01:44 PM

It's not going into a truck, but this is what my dad and I are working on. And yes that is a thermostat housing.

**MikeN** · 04-26-2013, 01:55 PM

My first guess was that's the blower off of a late 90's Pontiac GTP 3800 or similar, but the "3.8" on the lid sort of looks like it's off of the supercharged 3.8 used in Ford Thunderbirds. Sweet project either way though.

Nivlac57 · 04-26-2013, 05:02 PM

Quote:

Originally Posted by MikeN

My first guess was that's the blower off of a late 90's Pontiac GTP 3800 or similar, but the "3.8" on the lid sort of looks like it's off of the supercharged 3.8 used in Ford Thunderbirds. Sweet project either way though.

You guessed it. It's off of a Thunderbird Supercoupe.

jcramsey · 04-26-2013, 01:56 PM

Quote:

Originally Posted by Nivlac57

It's not going into a truck, but this is what my dad and I are working on. And yes that is a thermostat housing.

sweeeeeeet.....keep us updated!

KroAutomotiveInc · 04-26-2013, 02:40 PM

Nivlac57 you have anymore pic's thats pretty trick looking i hope to turbo or supercharger my inline one day!

Nivlac57 · 04-26-2013, 05:00 PM

Quote:

Originally Posted by KroAutomotiveInc

Nivlac57 you have anymore pic's thats pretty trick looking i hope to turbo or supercharger my inline one day!

Yes I do. I have a nice little build site for it. http://nova777.yolasite.com/

sixtyeightchevykid · 05-11-2013, 08:14 AM

what headers is everyone running for performance, and best quality, long tube or short tubes?

03-28-2013, 11:47 PM	#5
KroAutomotiveInc Registered User Join Date: Jun 2010 Location: UT Posts: 908	Re: Tricked-out Chevy six cylinder engines that is one sweet 230 Vernski you gotta take me for a ride some day! __________________ Car & Truck Projects Google Community. https://plus.google.com/communities/...80679980403145 Youtube channel. http://www.youtube.com/channel/UC2HB...view_as=public 1964 GMC http://67-72chevytrucks.com/vboard/s...d.php?t=419525

03-29-2013, 12:54 AM	#6
slepysal Registered User Join Date: Oct 2006 Location: San Jose NOR*CAL Posts: 3,080	Re: Tricked-out Chevy six cylinder engines thats sweet Vernski, were did you get your breather cap ? __________________ 1960 Apache long bed fleet L6 250 Clifford intake 2 bbl carb. Langdon cast headers with dual exhaust and bellflower tips. T-5 5 speed, power steering and power disc brakes. "Over, Around or through it... "

03-29-2013, 12:56 AM	#7
TJ's Chevy Post Whore Join Date: Mar 2013 Location: Southern Oregon Posts: 10,384	Re: Tricked-out Chevy six cylinder engines That is one awsome 6 cylinder ya got there! Wish mine looked like it.

03-29-2013, 01:13 AM	#8
TJ's Chevy Post Whore Join Date: Mar 2013 Location: Southern Oregon Posts: 10,384	Re: Tricked-out Chevy six cylinder engines Has anybody here ever used the lump port head? And a good cam ta go with it? I almost made a big mistake in cam selection! Never do that!

03-29-2013, 05:24 PM	#10
KroAutomotiveInc Registered User Join Date: Jun 2010 Location: UT Posts: 908	Re: Tricked-out Chevy six cylinder engines i was wrong 292's started production in 1962 didnt know that! __________________ Car & Truck Projects Google Community. https://plus.google.com/communities/...80679980403145 Youtube channel. http://www.youtube.com/channel/UC2HB...view_as=public 1964 GMC http://67-72chevytrucks.com/vboard/s...d.php?t=419525 Last edited by KroAutomotiveInc; 03-29-2013 at 05:31 PM.

03-29-2013, 05:26 PM	#12
KroAutomotiveInc Registered User Join Date: Jun 2010 Location: UT Posts: 908	Re: Tricked-out Chevy six cylinder engines i guess the chart shows it in all years tho interesting __________________ Car & Truck Projects Google Community. https://plus.google.com/communities/...80679980403145 Youtube channel. http://www.youtube.com/channel/UC2HB...view_as=public 1964 GMC http://67-72chevytrucks.com/vboard/s...d.php?t=419525

04-04-2013, 09:43 PM	#13
gofastnut Registered User Join Date: Feb 2011 Location: Williams, CA Posts: 760	Re: Tricked-out Chevy six cylinder engines Sweet Sixes guys!! Can't wait to get to building mine!! __________________ Jeff 96 C3500 Crew Cab Long bed (Waiting on Cool Name) 64 C-10 shortie stepside, "Ole Brownie" C-10 Club My achingly slow build: http://67-72chevytrucks.com/vboard/s...d.php?t=508345

04-04-2013, 11:00 PM	#14
chevy_man5 GMC's n H.D.'s too! Join Date: Oct 2010 Location: Nampa, Idaho Posts: 1,583	Re: Tricked-out Chevy six cylinder engines Planning on working on the new 292 this weekend. My son wants to go with the dark green. Any one have any pictures? Posted via Mobile Device __________________ Jason 1960 GMC 4x4 Babe (the Blue Ox) - Build Thread

04-05-2013, 11:12 AM	#16
chevy_man5 GMC's n H.D.'s too! Join Date: Oct 2010 Location: Nampa, Idaho Posts: 1,583	Re: Tricked-out Chevy six cylinder engines If I had been around 47 years ago, I would have definitely asked! LOL as it is, my dad would have been 11 then. LOL I have been looking online to see if I could find a dark green, but not much luck so far. I will try that site specifically though. Thanks! __________________ Jason 1960 GMC 4x4 Babe (the Blue Ox) - Build Thread

04-25-2013, 05:59 PM	#18
slepysal Registered User Join Date: Oct 2006 Location: San Jose NOR*CAL Posts: 3,080	Re: Tricked-out Chevy six cylinder engines I have an edlebrock 500 at home I plan on rebuilding it and seeing how it works ! __________________ 1960 Apache long bed fleet L6 250 Clifford intake 2 bbl carb. Langdon cast headers with dual exhaust and bellflower tips. T-5 5 speed, power steering and power disc brakes. "Over, Around or through it... "

04-26-2013, 01:44 PM	#19
Nivlac57 Registered User Join Date: Apr 2013 Location: York, PA Posts: 3	Re: Tricked-out Chevy six cylinder engines It's not going into a truck, but this is what my dad and I are working on. And yes that is a thermostat housing.

04-26-2013, 01:55 PM	#20
MikeN Senior Member Join Date: Oct 2007 Location: Marietta, GA Posts: 782	Re: Tricked-out Chevy six cylinder engines My first guess was that's the blower off of a late 90's Pontiac GTP 3800 or similar, but the "3.8" on the lid sort of looks like it's off of the supercharged 3.8 used in Ford Thunderbirds. Sweet project either way though.

04-26-2013, 02:40 PM	#23
KroAutomotiveInc Registered User Join Date: Jun 2010 Location: UT Posts: 908	Re: Tricked-out Chevy six cylinder engines Nivlac57 you have anymore pic's thats pretty trick looking i hope to turbo or supercharger my inline one day! __________________ Car & Truck Projects Google Community. https://plus.google.com/communities/...80679980403145 Youtube channel. http://www.youtube.com/channel/UC2HB...view_as=public 1964 GMC http://67-72chevytrucks.com/vboard/s...d.php?t=419525

05-11-2013, 08:14 AM	#25
sixtyeightchevykid Registered User Join Date: Jan 2010 Location: Stillwater, Oklahoma Posts: 194	Re: Tricked-out Chevy six cylinder engines what headers is everyone running for performance, and best quality, long tube or short tubes? __________________ 1968 chevy c10 lwb, 250 inline6, 4 speed,



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.