Project "What was I Thinking" 68 SWB - Page 11 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

sourkraut · 01-10-2012, 09:57 PM

Nice build!

Bennett68C10 · 01-11-2012, 09:02 AM

Quote:

Originally Posted by sourkraut

Nice build!

Thankyou.

For the past couple of weeks I have been working on replacing the inner bottoms and re-skinning both doors, don't have alot of time to work on it so its taking forever. Will try to get some pics up this weekend. Also coated the inside of the doors with rust converter, then rust encapsulator, bedliner then finish them off with some Boom Mat. Hopefully they won't rust anytime soon and should sound solid when closing.

Bennett68C10 · 01-15-2012, 10:27 AM

Some Pics as promised. First one is of Passenger door after spraying boom mat on. I had already sprayed rust converter, rust encapsulator and bedliner before the boom mat. Now its ready for the skin to go on.

Next couple of pics are of the rust work on the Drivers side door. Replaced the inner door bottoms, fixed the rusted out upper hinge area and fixed the upper part of the door on the latch side.

mcbassin · 01-15-2012, 12:49 PM

Very nice work on the rust repair. Keep hammering

VA72C10 · 01-25-2012, 04:21 PM

Nice! Going to be sweet!!!!

Also, great work on the rust repair!!!

Bennett68C10 · 01-25-2012, 04:42 PM

Quote:

Originally Posted by VA72C10

Nice! Going to be sweet!!!!

Also, great work on the rust repair!!!

Thanks, she won't lay frame but it's good enough for me and should look awesome.
Posted via Mobile Device

mcbassin · 01-25-2012, 05:16 PM

Hey, that's a sweet pile of top notch parts!

CC69Rat · 01-25-2012, 05:40 PM

We need a smiley face for 'jealous' .. Keith, reading back through your build at the very first you mentioned "It seems I have been working on it a year and nothing's done but the frame" .. I cracked up.

Um, Nooo .. it's not.

David67 · 01-25-2012, 07:42 PM

SWEET

can't wait to see how it sits!!

Bennett68C10 · 01-25-2012, 10:02 PM

Quote:

Originally Posted by mcbassin

Hey, that's a sweet pile of top notch parts!

Thanks Mike

Quote:

Originally Posted by CC69Rat

We need a smiley face for 'jealous' .. Keith, reading back through your build at the very first you mentioned "It seems I have been working on it a year and nothing's done but the frame" .. I cracked up.

Um, Nooo .. it's not.

Chad we know they are never done lol, don't worry you have the itch yours won't be done either.

Quote:

Originally Posted by David67

SWEET

can't wait to see how it sits!!

Thanks me too
Posted via Mobile Device

butternut1972 · 02-05-2012, 12:55 PM

Sweet. I love it when guys take pictures of thier parts in the house...it's like furniture for truck guy's. Cool parts.

Bennett68C10 · 02-05-2012, 02:45 PM

Quote:

Originally Posted by butternut1972

Sweet. I love it when guys take pictures of thier parts in the house...it's like furniture for truck guy's. Cool parts.

Lol yeah I get a little excited when I get new parts. My fiancé laughs at me when I take pictures of it
Posted via Mobile Device

raull · 02-13-2012, 09:58 AM

no control arms yet? !!!!!

Bennett68C10 · 02-13-2012, 10:34 AM

Quote:

Originally Posted by raull

no control arms yet? !!!!!

No not yet but Nate did tell me it would be a few weeks before I got them. I ordered them with the ball joints moved forward 1" to center the wheels in the wheel wells so they had to be built. Its ok though I don't need them yet, I'm finishing up my doors now.

PBFAB.COM · 02-13-2012, 11:02 AM

Quote:

Originally Posted by raull

no control arms yet? !!!!!

Tracking shows them arriving on Thursday the 16th!!!!!!

Bennett68C10 · 02-13-2012, 02:15 PM

Wow thanks Nate I'm excited.
Posted via Mobile Device

Bennett68C10 · 02-16-2012, 08:10 PM

Received my porterbuilt control arms today, these things are sick

butternut1972 · 02-16-2012, 10:41 PM

Sweet.
Posted via Mobile Device

David67 · 02-17-2012, 01:16 AM

Wow that looks awesome.

raull · 02-17-2012, 08:19 AM

niiiiiiiiiice !!!!

Bennett68C10 · 02-17-2012, 02:34 PM

Quote:

Originally Posted by butternut1972

Sweet.
Posted via Mobile Device

Quote:

Originally Posted by David67

Wow that looks awesome.

Quote:

Originally Posted by raull

niiiiiiiiiice !!!!

Thanks guys I'm pretty excited about them
Posted via Mobile Device

Bennett68C10 · 02-19-2012, 05:12 PM

Finally got my doors done this weekend. Got the skins on and bolted the doors back on to set the gaps. Need to do the bodywork on them now. Had to modify the drivers side cab corner to get that gap right. Oh well whats a little more cutting and welding at this point lol.

**fakerwade** · 02-19-2012, 06:05 PM

Looks like a "wizard of oz" picture???!!! Did your cab land on you???

Bennett68C10 · 02-20-2012, 10:54 AM

Quote:

Originally Posted by fakerwade

Looks like a "wizard of oz" picture???!!! Did your cab land on you???

mcbassin · 02-23-2012, 01:16 AM

Nice pile of parts you got in from Nate. I hope to upgrade my suspension one of these days. I just want to get it on the road right now.

Quote:

Originally Posted by Bennett--G4L

Finally got my doors done this weekend. Got the skins on and bolted the doors back on to set the gaps. Need to do the bodywork on them now. Had to modify the drivers side cab corner to get that gap right. Oh well whats a little more cutting and welding at this point lol.

I hear you on the welding cutting fitting .....repeat. It's a never ending deal. You have done a bunch of the same stuff I have been fighting for the last two months in my free time.

01-10-2012, 09:57 PM	#1
sourkraut Registered User Join Date: Sep 2008 Location: WI Posts: 1,243	Re: Project "What was I Thinking" 68 SWB Nice build! __________________ "The way it is" truck build http://67-72chevytrucks.com/vboard/s...d.php?t=359200

01-15-2012, 10:27 AM	#3
Bennett68C10 Registered User Join Date: Dec 2006 Location: Toms River, NJ Posts: 5,518	Re: Project "What was I Thinking" 68 SWB Some Pics as promised. First one is of Passenger door after spraying boom mat on. I had already sprayed rust converter, rust encapsulator and bedliner before the boom mat. Now its ready for the skin to go on. Next couple of pics are of the rust work on the Drivers side door. Replaced the inner door bottoms, fixed the rusted out upper hinge area and fixed the upper part of the door on the latch side. Attached Images __________________ Keith 66 Suburban Burb Build Thread: http://67-72chevytrucks.com/vboard/s...d.php?t=751361 IG: bennett68c10

01-15-2012, 12:49 PM	#4
mcbassin Still Learning Join Date: Jul 2009 Location: Central Oklahoma Posts: 10,108	Re: Project "What was I Thinking" 68 SWB Very nice work on the rust repair. Keep hammering __________________ Mike "69 Short Wide" My Project 86 Silverado Landen's Project Instagram: @mcbassin My Website C/10 Club Oklahoma Facebook Group

01-25-2012, 04:21 PM	#5
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,269	Re: Project "What was I Thinking" 68 SWB Nice! Going to be sweet!!!! Also, great work on the rust repair!!! __________________ Looking for a 67-72 swb or blazer project in or around VA.

01-25-2012, 05:16 PM	#7
mcbassin Still Learning Join Date: Jul 2009 Location: Central Oklahoma Posts: 10,108	Re: Project "What was I Thinking" 68 SWB Hey, that's a sweet pile of top notch parts! __________________ Mike "69 Short Wide" My Project 86 Silverado Landen's Project Instagram: @mcbassin My Website C/10 Club Oklahoma Facebook Group

01-25-2012, 05:40 PM	#8
CC69Rat Registered User Join Date: Jan 2011 Location: Chattanooga TN Posts: 6,207	Re: Project "What was I Thinking" 68 SWB We need a smiley face for 'jealous' .. Keith, reading back through your build at the very first you mentioned "It seems I have been working on it a year and nothing's done but the frame" .. I cracked up. Um, Nooo .. it's not. __________________ Chad 1967 C10 SWB - Project Savannah - 6.0/4L80 Currently underway 1968 C10 SWB - TOTY 2018, 50th Anniversary Tribute Project * Sold * Pride and Joy 1986 Silverado Short Fleet - Scarlet Sold 1985 Silverado Short Fleet Sold 2022 Jeep Gladiator Mojave 2001 Jeep Cherokee XJ 4x4 - Lifted, Built 1992 Jeep Cherokee XJ 4x4 - Lifted 2013 Honda Accord EX-L v6 Coupe 6spd (wife's ride)

01-25-2012, 07:42 PM	#9
David67 Registered User Join Date: Mar 2010 Location: Spring, TX Posts: 886	Re: Project "What was I Thinking" 68 SWB SWEET can't wait to see how it sits!! __________________ 1967 C10 Fightin' Texas Aggie Class of 2015 IG: david_r67

02-05-2012, 12:55 PM	#11
butternut1972 Registered User Join Date: May 2009 Location: longview,wa Posts: 1,094	Re: Project "What was I Thinking" 68 SWB Sweet. I love it when guys take pictures of thier parts in the house...it's like furniture for truck guy's. Cool parts. __________________ 1972 GMC (PROJECT LONG OVERDUE) 1998 SWB 4WD

02-13-2012, 09:58 AM	#13
raull Registered User Join Date: Mar 2009 Location: miramar florida Posts: 1,232	Re: Project "What was I Thinking" 68 SWB no control arms yet? !!!!! __________________ check out my build thread 71 c/10 step side 5.3 twin turbo http://67-72chevytrucks.com/vboard/s...d.php?t=485320 raul

02-13-2012, 02:15 PM	#16
Bennett68C10 Registered User Join Date: Dec 2006 Location: Toms River, NJ Posts: 5,518	Re: Project "What was I Thinking" 68 SWB Wow thanks Nate I'm excited. Posted via Mobile Device __________________ Keith 66 Suburban Burb Build Thread: http://67-72chevytrucks.com/vboard/s...d.php?t=751361 IG: bennett68c10

02-16-2012, 08:10 PM	#17
Bennett68C10 Registered User Join Date: Dec 2006 Location: Toms River, NJ Posts: 5,518	Re: Project "What was I Thinking" 68 SWB Received my porterbuilt control arms today, these things are sick Attached Images __________________ Keith 66 Suburban Burb Build Thread: http://67-72chevytrucks.com/vboard/s...d.php?t=751361 IG: bennett68c10

02-16-2012, 10:41 PM	#18
butternut1972 Registered User Join Date: May 2009 Location: longview,wa Posts: 1,094	Re: Project "What was I Thinking" 68 SWB Sweet. Posted via Mobile Device __________________ 1972 GMC (PROJECT LONG OVERDUE) 1998 SWB 4WD

02-17-2012, 01:16 AM	#19
David67 Registered User Join Date: Mar 2010 Location: Spring, TX Posts: 886	Re: Project "What was I Thinking" 68 SWB Wow that looks awesome. __________________ 1967 C10 Fightin' Texas Aggie Class of 2015 IG: david_r67

02-17-2012, 08:19 AM	#20
raull Registered User Join Date: Mar 2009 Location: miramar florida Posts: 1,232	Re: Project "What was I Thinking" 68 SWB niiiiiiiiiice !!!! __________________ check out my build thread 71 c/10 step side 5.3 twin turbo http://67-72chevytrucks.com/vboard/s...d.php?t=485320 raul

02-19-2012, 05:12 PM	#22
Bennett68C10 Registered User Join Date: Dec 2006 Location: Toms River, NJ Posts: 5,518	Re: Project "What was I Thinking" 68 SWB Finally got my doors done this weekend. Got the skins on and bolted the doors back on to set the gaps. Need to do the bodywork on them now. Had to modify the drivers side cab corner to get that gap right. Oh well whats a little more cutting and welding at this point lol. Attached Images __________________ Keith 66 Suburban Burb Build Thread: http://67-72chevytrucks.com/vboard/s...d.php?t=751361 IG: bennett68c10



Register or Log In To remove these advertisements.

02-19-2012, 06:05 PM	#23
fakerwade Senior Member Join Date: Oct 2011 Location: Lewiston, ID. Posts: 627	Re: Project "What was I Thinking" 68 SWB Looks like a "wizard of oz" picture???!!! Did your cab land on you??? __________________ Wade , JUST WALK AWAY, AND I'LL SPARE YOUR LIVES!!! , Build thread "TANGERINE" http://67-72chevytrucks.com/vboard/s...d.php?t=498570 Board Members Met: bigblock68, ol_skool_chevy ,68TT,atvpro

Register or Log In To remove these advertisements.