Power Brake Booster Adapter Bracket

[WCHLVR]

Fantastic fit and finish! 100% satisfied. Will be purchasing again!

[Captainfab]

Thanks for the compliment

[PLYONS11]

Originally Posted by Captainfab

No it does not. In 1963 GM switched to a mechanical clutch actuation. The '63-'66's are the same as far as the master cylinder mounting is concerned.
If your GMC has a hydraulic clutch with the brake/clutch master combo, then it isn't a '63, it would be a '60-'62. If you need a power brake booster bracket for the '60-'62, I am still in the design stage on that one. If you are interested let me know and I'll see if I can get one done.



I'll send you a PM on this.

I am looking at an aftermarket master but would like to retain the hydro clutch. I am sure I have a 63, but it most def has a hydr clutch and brake master sharing the same cylinder. Has the bracket been made for this setup? I read the entire thread, but I may have missed the answer.

[Captainfab]

Yes the '60-'62 Chevy and '60-'63 GMC booster bracket with the hydraulic clutch has been done for a few years. The for sale thread is here:

http://www.67-72chevytrucks.com/vboa...d.php?t=362375

There are links to most of my for sale threads in my sig line. Just click on the word HERE in blue.

Originally Posted by PLYONS11

I am looking at an aftermarket master but would like to retain the hydro clutch. I am sure I have a 63, but it most def has a hydr clutch and brake master sharing the same cylinder. Has the bracket been made for this setup? I read the entire thread, but I may have missed the answer.

[ChiefRocka]

Hey Captain ....

Well, I FINALLY got around to using the Booster mount on my Burb build that I purchased some time ago !!

Perfect fit (as I expected) .... and you were right, the Roadmaster Booster went right on !!


-
-

-
-

-
-

-
-

[Captainfab]

Cool

Thanks for posting the pics

I'll have to add that booster to the compatible boosters list.

[ChiefRocka]

Originally Posted by Captainfab

Cool

Thanks for posting the pics

I'll have to add that booster to the compatible boosters list.

B-body ... (Caprice, Impala, Impala SS, Roadmaster, Cadillac)

[WCHLVR]

Captainfab Bracket
S10 Booster
1" Wilwood MC
Custom bracket to hang the Wilwood Proportioning Valve and Hurst Line Lock

[Captainfab]

That looks great

Thanks for posting a pic.

[Badluck66]

Hey Captain Fab! I need one of your famous Booster brackets in the black powdercoat for my '65 Chevy SWB.

Thanks!

-George

[Captainfab]

I'll send you a PM with ordering and payment info.

Originally Posted by Badluck66

Hey Captain Fab! I need one of your famous Booster brackets in the black powdercoat for my '65 Chevy SWB.

Thanks!

-George

[Badluck66]

Bracket received! Thanks Captain Fab for such a quality product! Shipping, packaging, and part is TOP NOTCH! Finish looks great! Love the vacuum packaging! Haven't received a part that looked this good in a while! Very Happy.

-George

[Captainfab]

Thanks for the compliments George

I appreciate the purchase.

[jwalk]

I'd like to purchase one of these brackets. Do you have any instock?

Thanks, Justin

[Captainfab]

I replied to your PM.......thanks for the purchase

Originally Posted by jwalk

I'd like to purchase one of these brackets. Do you have any instock?

Thanks, Justin

[rrmark007]

Hello Captain Fab, My name is Mark, I have a 1965 Suburban factory 4x4. It has the 292 engine. Currently changed out Dana 44 front closed knuckle and the rear 12 bolt to 1 ton axles from a 78 k30. I will be doing an engine swap to V8, and I am converting to power brakes. The 1 ton front Dana 60 is disk of course and I purchased a new power brake booster/master with proportioning valve from CPP designated for my 65 Burb. So, I need a booster bracket in blk powder coat please. Thx Captain Fab. Mark ,Tucson Az.

[Captainfab]

That master cylinder might be too small for your K30 calipers and wheel cylinders. The hydroboost and master cylinder from the '78 K30 would have worked nicely. I'll send you a PM.

[Clrussell]

Subscribing, I'll ordering one soon

[65gmcshortbed]

Looking to get a booster bracket for my 65. Are there any available?

[Captainfab]

Right now all I have is one in satin black powder coat. I will have more in bare steel next week.

Originally Posted by 65gmcshortbed

Looking to get a booster bracket for my 65. Are there any available?

[64shortc10]

Hi captainfab I'm in need of one of you booster mounting brackets! I bought a booster and master cylinder from summit racing to mount on my 66 c10! The mounting bolts are 3 1/2 inches apart. Will your bracket work? If so I need one shipped! Thanks
Tony from Norcal

[rickoner]

Capt'n, I'm up for a powder coated adapter for my '65 if/when one is available. Please pm me when they're in stock. Thanks.

[Captainfab]

The booster mounting holes in my booster brackets are 3-3/8" x 3-1/2" center to center. To use that aftermarket booster you will have to elongate the holes slightly. Let me know if you are good with that.

Originally Posted by 64shortc10

Hi captainfab I'm in need of one of you booster mounting brackets! I bought a booster and master cylinder from summit racing to mount on my 66 c10! The mounting bolts are 3 1/2 inches apart. Will your bracket work? If so I need one shipped! Thanks
Tony from Norcal

Powder coated booster brackets are in stock. I will send you a PM with payment info.

Originally Posted by rickoner

Capt'n, I'm up for a powder coated adapter for my '65 if/when one is available. Please pm me when they're in stock. Thanks.

[64shortc10]

Originally Posted by Captainfab

The booster mounting holes in my booster brackets are 3-3/8" x 3-1/2" center to center. To use that aftermarket booster you will have to elongate the holes slightly. Let me know if you are good with that.




Powder coated booster brackets are in stock. I will send you a PM with payment info.

I will take one! Thanks captainfab! Send me payment info!
Tony from Norcal

[rickoner]

Just sent you the funds via paypal. Thanks!