MI Reconditioned gauge Clusters F/S - Page 11 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

JackB · 02-26-2017, 02:35 AM

Hi Tom..I have a cluster from a 71 Blazer I need restored. I'll send you a PM as well.Thx

tristan · 02-26-2017, 07:05 AM

This is great news, welcome back.

**randy.powell** · 02-26-2017, 08:25 AM

Welcome back to our family, Tom!!! You may have to expand your shop space!
B/R,
Randy

**painterljp** · 02-26-2017, 12:24 PM

We have a original cluster with a tach needs some work and we don't know if it works or not. How much to check it all out make sure it works and what resister does it need to be installed with heI distributor? The truck we are putting it in didn't have a tach previously. So what do we need to do with the plug? If anything. Will take some pictures of it soon. Please let me know ball park pricing, etc. Thanks. Also don't know how this forum works with messages and such am new to board although been a member for some time. Am learning. Thanks again.

**TBONE1964** · 02-26-2017, 03:40 PM

Quote:

Originally Posted by painterljp

We have a original cluster with a tach needs some work and we don't know if it works or not. How much to check it all out make sure it works and what resister does it need to be installed with heI distributor? The truck we are putting it in didn't have a tach previously. So what do we need to do with the plug? If anything. Will take some pictures of it soon. Please let me know ball park pricing, etc. Thanks. Also don't know how this forum works with messages and such am new to board although been a member for some time. Am learning. Thanks again.

Hi there, I am going to send you a PM (private message with details.

Thank you for the interest,
Tom

flashed · 02-26-2017, 04:48 PM

Can you add a Tach to a cluster that dont have one ?

**TBONE1964** · 02-26-2017, 05:18 PM

Quote:

Originally Posted by flashed

Can you add a Tach to a cluster that dont have one ?

Yes it can be done. It will depend on if you want all OE parts or aftermarket or a combination of both. I have had good luck with the aftermarket tachs. The OE tachs are over 40 + years old and most of them have some issues.

You need both tins, new lens and new circuit board as well as the tach

I also have the ability to test OE tachs.

Let me know what you are looking to accomplish and I should be able to help you out.

Thank you,
Tom

flashed · 02-26-2017, 06:52 PM

Will do ,thinking about adding a tach cluster to a 72 4x4 I just bought .

**craneboy72** · 02-26-2017, 09:20 PM

Is an OE tach repairable if you test and it's no good or just best to go with one of our after market tachs?

**TBONE1964** · 02-26-2017, 09:36 PM

Quote:

Originally Posted by craneboy72

Is an OE tach repairable if you test and it's no good or just best to go with one of our after market tachs?

Here is the common issue with OE tachs. Most of these may have sat in a garage or barn or basement, etc. With that environment comes dirt and dust. Add the fact the gauge is already 40+ yrs old and not many of them work any longer or have intermittent issues. The problem is that once one of those tachs have been repaired, they are bound to have another issue shortly after the first issue and so on and so on. They cost more to keep going than they are worth in my opinion.

I am not sure if it would be worth the effort to put modern day tach guts in an original tin? It would be the best of both worlds and LS compatible would be a bigger bonus

As for aftermarket tachs, I use Counterpart brand. I have sold many in my restorations and have had no issues that I am aware of.

Hope this helps. Let me know if you need more info.

Tom

AASmedic · 02-26-2017, 10:56 PM

HI Tom,
I'm still in need of an OEM tach/vac lens and a good clean tach face. Let me know if you have any for sale.

**TBONE1964** · 02-26-2017, 11:01 PM

Quote:

Originally Posted by AASmedic

HI Tom,
I'm still in need of an OEM tach/vac lens and a good clean tach face. Let me know if you have any for sale.

Nothing yet Kevin. I am getting back into this a little so maybe something will come my way for you. I will keep you in mind for sure.

Hope something comes up for you soon.

Take care,
Tom

AASmedic · 02-26-2017, 11:55 PM

Thanks Tom

**TBONE1964** · 03-05-2017, 03:00 PM

Currently working on a restoration for a board member. It will get my usual treatment.

In case anyone is interested, I do more than Chevy truck clusters. Contact me if you are interested. Also working on a cluster for a 1954 Pontiac that is getting a 12 volt conversion and a volt gauge instead of the stock amp gauge.

Thank you for looking,
Tom

**Bill72** · 03-05-2017, 05:28 PM

Tom- Are you still doing the 80's quartz clocks?

**TBONE1964** · 03-05-2017, 05:36 PM

Quote:

Originally Posted by Bill72

Tom- Are you still doing the 80's quartz clocks?

Yes, are you wanting to add on to your existing cluster or ???

Let me know what you need. I have a few of the clocks here but not sure if they are complete.

You can send me a PM or email to : tbonegarris@yahoo.com

If you send email, add your screen name in the subject box so I know it is you.

Thank you,
Tom

**craneboy72** · 03-05-2017, 06:12 PM

Tom email sent in regards to a tach

**TBONE1964** · 03-05-2017, 07:13 PM

Quote:

Originally Posted by craneboy72

Tom email sent in regards to a tach

I got it and responded to it.

Thank you,
Tom

**TBONE1964** · 03-27-2017, 08:00 PM

TTT,

Let me know if anyone needs restoration work done or repair. Remember that I am set up to repair and calibrate speedometers. I can also set your odometer to mileage of choice. I can do a volt gauge conversion as well as add a clock in the small un-used space on the cluster.

Thank you,
Tom

**71CHEVYSHORTBED402** · 03-27-2017, 09:28 PM

Quote:

Originally Posted by TBONE1964

TTT,

Let me know if anyone needs restoration work done or repair. Remember that I am set up to repair and calibrate speedometers. I can also set your odometer to mileage of choice. I can do a volt gauge conversion as well as add a clock in the small un-used space on the cluster.

Thank you,
Tom

You're still on my radar Tom. I'm a year plus from installing any cluster.

**TBONE1964** · 03-27-2017, 10:51 PM

Quote:

Originally Posted by 71CHEVYSHORTBED402

You're still on my radar Tom. I'm a year plus from installing any cluster.

Just let me know. Are you gathering gauges and other parts you want for your cluster? Let me know if you need help with anything.

Take care,
Tom

**71CHEVYSHORTBED402** · 03-28-2017, 10:09 PM

Quote:

Originally Posted by TBONE1964

Just let me know. Are you gathering gauges and other parts you want for your cluster? Let me know if you need help with anything.

Take care,
Tom

Sadly I haven't purchased anything. Not sure what I need at this point.

**TBONE1964** · 04-08-2017, 10:26 PM

Quote:

Originally Posted by 71CHEVYSHORTBED402

Sadly I haven't purchased anything. Not sure what I need at this point.

Sorry for the late response. When you are ready we will get it figured out.

Take care,
Tom

**TBONE1964** · 04-08-2017, 10:28 PM

Just returned from the Portland swap meet. I bought a couple of cores there. If any one is interested in building a tach or non tach cluster with or without a volt gauge conversion, let me know and I can provide details.

Take care,
Tom

**NGN** · 04-09-2017, 10:22 AM

Hi Tom, is it possible to get a reconditioned full gauge set up with tach and maybe also with a clock (not really sure about clock) for a 1967 truck. I would like the silver paint set up like the original , not chrome. I know this is not topic to what you do but, I would like my glove box to match the recondition dash is that's something you might do of course for a additional fee.
NGN
Thanks Nick

02-26-2017, 02:35 AM	#251
JackB Registered User Join Date: May 2015 Location: Prescott AZ Posts: 199	Re: Reconditioned gauge Clusters F/S Hi Tom..I have a cluster from a 71 Blazer I need restored. I'll send you a PM as well.Thx

02-26-2017, 07:05 AM	#252
tristan Registered User Join Date: Sep 2013 Location: Western PA Posts: 1,295	Re: Reconditioned gauge Clusters F/S This is great news, welcome back.

02-26-2017, 08:25 AM	#253
randy.powell Senior Member Join Date: Jun 2014 Location: Bushwood, MD Posts: 510	Re: Reconditioned gauge Clusters F/S Welcome back to our family, Tom!!! You may have to expand your shop space! B/R, Randy

02-26-2017, 12:24 PM	#254
painterljp Senior Member Join Date: Nov 2014 Location: Albuquerque NM Posts: 901	Re: Reconditioned gauge Clusters F/S We have a original cluster with a tach needs some work and we don't know if it works or not. How much to check it all out make sure it works and what resister does it need to be installed with heI distributor? The truck we are putting it in didn't have a tach previously. So what do we need to do with the plug? If anything. Will take some pictures of it soon. Please let me know ball park pricing, etc. Thanks. Also don't know how this forum works with messages and such am new to board although been a member for some time. Am learning. Thanks again.

02-26-2017, 04:48 PM	#256
flashed Registered User Join Date: Oct 2009 Location: canton ga Posts: 12,728	Re: Reconditioned gauge Clusters F/S Can you add a Tach to a cluster that dont have one ?

02-26-2017, 06:52 PM	#258
flashed Registered User Join Date: Oct 2009 Location: canton ga Posts: 12,728	Re: Reconditioned gauge Clusters F/S Will do ,thinking about adding a tach cluster to a 72 4x4 I just bought .

02-26-2017, 09:20 PM	#259
craneboy72 Senior Member Join Date: Jun 2015 Location: Acton Ma Posts: 759	Re: Reconditioned gauge Clusters F/S Is an OE tach repairable if you test and it's no good or just best to go with one of our after market tachs?

02-26-2017, 10:56 PM	#261
AASmedic Registered User Join Date: Dec 2015 Location: Albuquerque Posts: 773	Re: Reconditioned gauge Clusters F/S HI Tom, I'm still in need of an OEM tach/vac lens and a good clean tach face. Let me know if you have any for sale. __________________ My Paypal address is: http://paypal.me/KFerguson66 72 K20 Cheyenne Super My "re-build" thread http://67-72chevytrucks.com/vboard/s...?t=710221&goto Thread for my Reproduction Jack Bags http://67-72chevytrucks.com/vboard/s...d.php?t=715455

02-26-2017, 11:55 PM	#263
AASmedic Registered User Join Date: Dec 2015 Location: Albuquerque Posts: 773	Re: Reconditioned gauge Clusters F/S Thanks Tom __________________ My Paypal address is: http://paypal.me/KFerguson66 72 K20 Cheyenne Super My "re-build" thread http://67-72chevytrucks.com/vboard/s...?t=710221&goto Thread for my Reproduction Jack Bags http://67-72chevytrucks.com/vboard/s...d.php?t=715455

03-05-2017, 03:00 PM	#264
TBONE1964 Cluster King Join Date: Nov 2012 Location: Junction City, OR Posts: 5,263	Re: Reconditioned gauge Clusters F/S Currently working on a restoration for a board member. It will get my usual treatment. In case anyone is interested, I do more than Chevy truck clusters. Contact me if you are interested. Also working on a cluster for a 1954 Pontiac that is getting a 12 volt conversion and a volt gauge instead of the stock amp gauge. Thank you for looking, Tom Attached Images

03-05-2017, 05:28 PM	#265
Bill72 Registered User Join Date: Feb 2008 Location: Fort Sumner, NM Posts: 299	Re: Reconditioned gauge Clusters F/S Tom- Are you still doing the 80's quartz clocks?

03-05-2017, 06:12 PM	#267
craneboy72 Senior Member Join Date: Jun 2015 Location: Acton Ma Posts: 759	Re: Reconditioned gauge Clusters F/S Tom email sent in regards to a tach

03-27-2017, 08:00 PM	#269
TBONE1964 Cluster King Join Date: Nov 2012 Location: Junction City, OR Posts: 5,263	Re: Reconditioned gauge Clusters F/S TTT, Let me know if anyone needs restoration work done or repair. Remember that I am set up to repair and calibrate speedometers. I can also set your odometer to mileage of choice. I can do a volt gauge conversion as well as add a clock in the small un-used space on the cluster. Thank you, Tom

04-08-2017, 10:28 PM	#274
TBONE1964 Cluster King Join Date: Nov 2012 Location: Junction City, OR Posts: 5,263	Re: Reconditioned gauge Clusters F/S Just returned from the Portland swap meet. I bought a couple of cores there. If any one is interested in building a tach or non tach cluster with or without a volt gauge conversion, let me know and I can provide details. Take care, Tom

04-09-2017, 10:22 AM	#275
NGN Registered User Join Date: Nov 2001 Location: Old Bridge,NJ Posts: 832	Re: Reconditioned gauge Clusters F/S Hi Tom, is it possible to get a reconditioned full gauge set up with tach and maybe also with a clock (not really sure about clock) for a 1967 truck. I would like the silver paint set up like the original , not chrome. I know this is not topic to what you do but, I would like my glove box to match the recondition dash is that's something you might do of course for a additional fee. NGN Thanks Nick



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.