trying to clean out bit before summer hits - Page 11 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Streudels68 · 03-24-2010, 11:49 AM

I didn't read all of the threads, but do you still have the disc brake set up and 5 lug rear end?

teeitup · 03-24-2010, 11:57 AM

Yes still got a setup but they would have to be picked up. Thanks Randy

VOLZ1207 · 03-24-2010, 08:41 PM

Hello, looking for a set of blue seat belts all 3 or just driver & passenger and blue arm rests. Price shipped to nashville tn thanks

teeitup · 03-24-2010, 08:56 PM

I have some seat belts out there, not sure what color. I can look Thurs after work. Thanks Randy

VOLZ1207 · 03-24-2010, 09:16 PM

Sounds good 37122 take care scott

Hottrucks · 03-24-2010, 09:30 PM

any luck on another booster??

and I'm looking for a drive shaft for a turbo 400 in a LWB

teeitup · 03-24-2010, 09:53 PM

Sorry neither yet, Thanks Randy

VOLZ1207 · 03-25-2010, 09:39 PM

Quote:

Originally Posted by VOLZ1207

Hello, looking for a set of blue seat belts all 3 or just driver & passenger and blue arm rests. Price shipped to nashville tn thanks

did you get a chance to look for these? shipped to 37122 thanks!!

teeitup · 03-26-2010, 06:22 PM

Volz here is what I have, no real sets except in green

teeitup · 03-26-2010, 06:23 PM

more

teeitup · 03-26-2010, 06:24 PM

pics for redcamaro

themeskin · 03-26-2010, 07:22 PM

hi randy do u have a set of gravel guards for a sport bumper . thanks

SCOOBYDOOBYDOO · 03-26-2010, 07:43 PM

I need a ochre ash tray and mounting bracket. A passenger seat hold down bracket for a blazer. A turn signal lever. A skid plate for a np205 for a 72 4x4 blazer drivers side mirror Rear seat belts in black Let me know if you could

kacz81 · 03-29-2010, 08:25 PM

hey randy can you give me a price for a column shift lever,gear indicator,linkage and bracket pretty much everything to convert back to column shift for a 72 c10 non tilt 350/350 shipped to 60404 thanks

teeitup · 03-29-2010, 11:17 PM

themeskin, not right now sorry
Scoobydoobydoo, I may have a ash tray, turn signal lever. I have a skid plate, its not original, btu it was built using a templet of a original one by a machine shop. Sorry none of the other stuff
kacz81, I may have the column parts, no good columns right now. I think I have a set of th350 linkage out there, I can look Tues after work
Thanks Randy

teeitup · 03-30-2010, 09:26 PM

here is what I have guys

kacz81 · 03-31-2010, 07:11 AM

I'll take the column parts & linkage Let me know your price shipped to 60404 i'll pay you through paypal thanks again randy

teeitup · 03-31-2010, 07:59 AM

I'll get a quote later today. Thanks Randy

teeitup · 03-31-2010, 09:47 PM

pics for NOSURF 3 different bumpers

teeitup · 03-31-2010, 09:48 PM

more

kacz81 · 04-01-2010, 07:15 AM

Payment sent

**lks dcvn** · 04-01-2010, 10:47 AM

Randy - do you have a good condition door latch [that is inside the door] for the driver side by chance.

The one I have has a stripped head and I don't feel like dealing with it - figured I would check to see if you had one laying around that you were looking to part with so I could get my Blazer up and running...

If you have the whole door latch, rods and the long actuator for a 72 that the handle attaches to and it works great - I would likely take the whole thing.

Let me know.

Thanks.

SCOOBYDOOBYDOO · 04-01-2010, 05:27 PM

I will take the ashtray and the turn signal lever do you have the mounting frame for the ashtray ?? hardware etc maybe.
Send me a pm

teeitup · 04-01-2010, 05:44 PM

lks dcvn, sorry no doors right now. I'll watch for you though
Scoobydoobydoo, sorry no mounting bracket. I'll pm you
Thanks Randy

teeitup · 04-01-2010, 08:44 PM

pics for mshirey, first one is real good, some chipping in middle, no cracks and studs look good. 2nd one looks good, studs have been straightened, no cracks. Your choice

03-24-2010, 11:49 AM	#251
Streudels68 Registered User Join Date: Jan 2010 Location: Georgetown, KY Posts: 14	Re: trying to clean out bit before summer hits I didn't read all of the threads, but do you still have the disc brake set up and 5 lug rear end?

03-24-2010, 11:57 AM	#252
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: trying to clean out bit before summer hits Yes still got a setup but they would have to be picked up. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

03-24-2010, 08:41 PM	#253
VOLZ1207 Registered User Join Date: Jan 2009 Location: MT JULIET, TN Posts: 38	Re: trying to clean out bit before summer hits Hello, looking for a set of blue seat belts all 3 or just driver & passenger and blue arm rests. Price shipped to nashville tn thanks

03-24-2010, 08:56 PM	#254
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: trying to clean out bit before summer hits I have some seat belts out there, not sure what color. I can look Thurs after work. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

03-24-2010, 09:16 PM	#255
VOLZ1207 Registered User Join Date: Jan 2009 Location: MT JULIET, TN Posts: 38	Re: trying to clean out bit before summer hits Sounds good 37122 take care scott

03-24-2010, 09:30 PM	#256
Hottrucks Redefining LowBudget Join Date: Mar 2009 Location: lebanon Cow Hampshire Posts: 4,538	Re: trying to clean out bit before summer hits any luck on another booster?? and I'm looking for a drive shaft for a turbo 400 in a LWB __________________ 1970 C10 CST fleetside 472 ....big dreams little cash... http://67-72chevytrucks.com/vboard/s...d.php?t=335721 SunShine Syndicate.. Mikes Sandwich Fair Run OCT 8th 2011 http://www.thesandwichfair.com/html/...auto_show.html

03-24-2010, 09:53 PM	#257
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: trying to clean out bit before summer hits Sorry neither yet, Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

03-26-2010, 06:22 PM	#259
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: trying to clean out bit before summer hits Volz here is what I have, no real sets except in green Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure" Last edited by teeitup; 03-26-2010 at 06:23 PM.

03-26-2010, 06:23 PM	#260
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: trying to clean out bit before summer hits more Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

03-26-2010, 06:24 PM	#261
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: trying to clean out bit before summer hits pics for redcamaro Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

03-26-2010, 07:22 PM	#262
themeskin Registered User Join Date: Feb 2009 Location: el paso tx Posts: 125	Re: trying to clean out bit before summer hits hi randy do u have a set of gravel guards for a sport bumper . thanks

03-26-2010, 07:43 PM	#263
SCOOBYDOOBYDOO Registered User Join Date: Feb 2010 Location: DANA POINT CA Posts: 256	Re: trying to clean out bit before summer hits I need a ochre ash tray and mounting bracket. A passenger seat hold down bracket for a blazer. A turn signal lever. A skid plate for a np205 for a 72 4x4 blazer drivers side mirror Rear seat belts in black Let me know if you could __________________ ScoobyDoobyDoo

03-29-2010, 08:25 PM	#264
kacz81 Registered User Join Date: Jul 2009 Location: Shorewood,IL. Posts: 75	Re: trying to clean out bit before summer hits hey randy can you give me a price for a column shift lever,gear indicator,linkage and bracket pretty much everything to convert back to column shift for a 72 c10 non tilt 350/350 shipped to 60404 thanks

03-29-2010, 11:17 PM	#265
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: trying to clean out bit before summer hits themeskin, not right now sorry Scoobydoobydoo, I may have a ash tray, turn signal lever. I have a skid plate, its not original, btu it was built using a templet of a original one by a machine shop. Sorry none of the other stuff kacz81, I may have the column parts, no good columns right now. I think I have a set of th350 linkage out there, I can look Tues after work Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

03-30-2010, 09:26 PM	#266
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: trying to clean out bit before summer hits here is what I have guys Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"



Register or Log In To remove these advertisements.

03-31-2010, 07:11 AM	#267
kacz81 Registered User Join Date: Jul 2009 Location: Shorewood,IL. Posts: 75	Re: trying to clean out bit before summer hits I'll take the column parts & linkage Let me know your price shipped to 60404 i'll pay you through paypal thanks again randy

03-31-2010, 07:59 AM	#268
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: trying to clean out bit before summer hits I'll get a quote later today. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

03-31-2010, 09:47 PM	#269
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: trying to clean out bit before summer hits pics for NOSURF 3 different bumpers Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

03-31-2010, 09:48 PM	#270
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: trying to clean out bit before summer hits more Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

04-01-2010, 07:15 AM	#271
kacz81 Registered User Join Date: Jul 2009 Location: Shorewood,IL. Posts: 75	Re: trying to clean out bit before summer hits Payment sent

04-01-2010, 10:47 AM	#272
lks dcvn Registered User Join Date: Jan 2007 Location: Columbus, Ohio Posts: 4,348	Re: trying to clean out bit before summer hits Randy - do you have a good condition door latch [that is inside the door] for the driver side by chance. The one I have has a stripped head and I don't feel like dealing with it - figured I would check to see if you had one laying around that you were looking to part with so I could get my Blazer up and running... If you have the whole door latch, rods and the long actuator for a 72 that the handle attaches to and it works great - I would likely take the whole thing. Let me know. Thanks.

04-01-2010, 05:27 PM	#273
SCOOBYDOOBYDOO Registered User Join Date: Feb 2010 Location: DANA POINT CA Posts: 256	Re: trying to clean out bit before summer hits I will take the ashtray and the turn signal lever do you have the mounting frame for the ashtray ?? hardware etc maybe. Send me a pm __________________ ScoobyDoobyDoo

04-01-2010, 05:44 PM	#274
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: trying to clean out bit before summer hits lks dcvn, sorry no doors right now. I'll watch for you though Scoobydoobydoo, sorry no mounting bracket. I'll pm you Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

04-01-2010, 08:44 PM	#275
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: trying to clean out bit before summer hits pics for mshirey, first one is real good, some chipping in middle, no cracks and studs look good. 2nd one looks good, studs have been straightened, no cracks. Your choice Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure" Last edited by teeitup; 04-01-2010 at 08:44 PM.

Register or Log In To remove these advertisements.