1969 Short Wide - Page 11 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

mcbassin · 08-11-2010, 02:36 PM

Quote:

Originally Posted by Puropedo

Hey Mike, have you started on your LS harness? Or are you thinking about sending it in to get it reworked?

Juanito,
Unfortunately, I haven't touched it since I picked it up. I'm kinda a one trick pony, can't multitask if you know what I mean. I do still plan on reworking the harness myself though. will still have to get the pcm reprogrammed by someone. I wonder if any board members are doing this yet?

*Puropedo* · 08-11-2010, 02:42 PM

It takes time and patience, I had my PCM flashed by a local Chevy dealer for only $80, but for some reason they wont do it again.....

mcbassin · 08-11-2010, 04:42 PM

Quote:

Originally Posted by Puropedo

It takes time and patience, I had my PCM flashed by a local Chevy dealer for only $80, but for some reason they wont do it again.....

$80 for the PCM? that's a good deal. So, did you do your harness yourself?

*Puropedo* · 08-14-2010, 02:48 AM

Quote:

Originally Posted by mcbassin

$80 for the PCM? that's a good deal. So, did you do your harness yourself?

I did, but I had a friend with previous experience doing this, wich help me a lot. Theres a lot of wires on the harness, it really helps to know what you are doing, I've got a few LS engines running on stand alone mode, but there is still a few bugs I have to work on with, specially if you are using the stock trannny that came with the engine.

68 TT · 11-29-2010, 07:44 PM

Any progress?

mcbassin · 11-30-2010, 12:43 AM

Quote:

Originally Posted by 68 TT

Any progress?

Funny you should ask, I have been working on an update. I spent the long weekend cleaning junk out of the shop to make room for this project inside. I got the front suspension taken apart and three of the control arms media blasted at work, need to find a RH lower arm (bent pretty bad). I still need to remove the mounting shafts and install new bushings. Not too sure about that since I've never done them.
I am pretty excited to be back on this for the winter months. BTW, I have been picking up parts here and there for the project. Got some pretty good stuff

My kid is super happy with his 86 so this is going to be my daily driver soon......well in the future. He wants a 67 or 68 so I am kinda on the lookout for another one.
here are the pics.

joe231 · 11-30-2010, 08:08 AM

nice work Mike!

68 TT · 11-30-2010, 12:40 PM

Quote:

Originally Posted by mcbassin

Funny you should ask, I have been working on an update. I spent the long weekend cleaning junk out of the shop to make room for this project inside. I got the front suspension taken apart and three of the control arms media blasted at work, need to find a RH lower arm (bent pretty bad). I still need to remove the mounting shafts and install new bushings. Not too sure about that since I've never done them.
I am pretty excited to be back on this for the winter months. BTW, I have been picking up parts here and there for the project. Got some pretty good stuff

My kid is super happy with his 86 so this is going to be my daily driver soon......well in the future. He wants a 67 or 68 so I am kinda on the lookout for another one.

Glad to hear you are making some progress and were able to clear out enough space in the shop for the 69 so you can work on it over the winter.

Wish I had gotten to that before it snowed. With the storm today we are going to set an all time snow fall record for the month of November. No realistic way to get my 69 C20 under cover now.

JohnC · 11-30-2010, 02:10 PM

Looks good!

mcbassin · 11-30-2010, 03:52 PM

Quote:

Originally Posted by joe231

nice work Mike!

Thanks Joe!

Quote:

Originally Posted by 68 TT

Glad to hear you are making some progress and were able to clear out enough space in the shop for the 69 so you can work on it over the winter.

Wish I had gotten to that before it snowed. With the storm today we are going to set an all time snow fall record for the month of November. No realistic way to get my 69 C20 under cover now.

Thanks! Man, it sounds like you guys are getting some crazy weather.

Quote:

Originally Posted by JohnC

Looks good!

Thanks John! You find another project yet?

JohnC · 12-01-2010, 10:18 AM

Quote:

Originally Posted by mcbassin

Thanks John! You find another project yet?

No I've decided to hold off on any projects until my youngest graduates high school. Just too much stuff going on. She'll be a Freshman next year so about 5 yrs or so. I'm always looking though

**scotts62** · 12-01-2010, 10:54 AM

Ouch John...

Probably better though

Heck one of mine might be done by then

Posted via Mobile Device

JohnC · 12-01-2010, 11:04 AM

Quote:

Originally Posted by scotts62

Ouch John...

Probably better though

Heck one of mine might be done by then

Posted via Mobile Device

Yeah I figured why try and get another one just to have the same result. Better to wait until I know I have a better chance of completing it, or it not being a burden sitting there.

mcbassin · 12-12-2010, 11:07 PM

I don't think this one will be completed any time soon, but hey I have to try.

Got a little progress done this weekend. Finished stripping the frame, got it read to be blasted or wire wheel cleaned on the bottom. I would really like to blast it if I can make it happen. I was able to pick up the lower control arm at Pull a part last week. Got them all blasted and primered. (forgot pics). All I need now is some cash to get rolling on this thing. Here are the pics:

67chevy1series · 12-13-2010, 01:24 AM

man that a arm is clean

mcbassin · 12-13-2010, 09:04 AM

Quote:

Originally Posted by 67chevy1series

man that a arm is clean

Thanks! yep it took about an hour a piece for the lower and 40 min. for the upper.

JohnC · 12-13-2010, 09:17 AM

Looking good Mike.

my67chevytruck · 12-13-2010, 09:19 AM

nice progress Mike....

**scotts62** · 12-13-2010, 09:20 AM

Man your going to have two built before i get one...

na man looking good!

STOCKISH · 12-13-2010, 04:46 PM

Looking good buddy!

*87 chevy silverado* · 12-25-2010, 06:30 AM

nice build

mcbassin · 12-25-2010, 12:17 PM

Quote:

Originally Posted by 87 chevy silverado

nice build

Thanks man!

**scotts62** · 12-25-2010, 12:20 PM

So whats next on the "to do" list for it?

mcbassin · 12-25-2010, 12:52 PM

Quote:

Originally Posted by scotts62

So whats next on the "to do" list for it?

Well, I want to media blast the frame and crossmembers. I picked up one of those portable blasting carts. Just need to get some glass/sand. Then, I will paint the frame, front and rear end.

Thursday I ordered all the new front steering and suspension parts. I still need 2" drop springs for the front.

Hope to hit it hard and heavy next week. Hard to believe how slow things go when strapped for cash

always this time of year.

67chevy1series · 12-25-2010, 03:35 PM

yes come new year i hope it is going to be a year where we can all produce what we want and drive em! the suspension is always the long techniqual part but you will get throught it , rememmber to take pictures . i will be watching

08-11-2010, 02:42 PM	#252
Puropedo Account Suspended Join Date: Nov 2008 Location: Prunedale California Posts: 782	Re: 1969 Short Wide It takes time and patience, I had my PCM flashed by a local Chevy dealer for only $80, but for some reason they wont do it again.....

11-29-2010, 07:44 PM	#255
68 TT Still plays with trucks Join Date: Jul 2009 Location: Spokane, WA Posts: 3,556	Re: 1969 Short Wide Any progress? __________________ miSSed opportunity - ground up creation of an AWD 1994 454 SS that never was http://67-72chevytrucks.com/vboard/s...d.php?t=795577 69 C10 shortbed stepside 400 small block - built like what a super sport truck could have been 69 K20 lwb TBI 350 4L60E NP208 14-bolt Dana-44 w/disc 68 Camaro SS / RS 500hp 439 inch roller cam big block 4L80E 79 Malibu TPI 350 4L60 w/ Z28 steering & sway bars

11-30-2010, 08:08 AM	#257
joe231 Registered User Join Date: Dec 2007 Location: Palmer, Alaska Posts: 13,821	Re: 1969 Short Wide nice work Mike! __________________ *CHEVY ONLY*

11-30-2010, 02:10 PM	#259
JohnC Registered User Join Date: Feb 2009 Location: Oklahoma Posts: 7,461	Re: 1969 Short Wide Looks good!

12-01-2010, 10:54 AM	#262
scotts62 One day... Join Date: Apr 2008 Location: Tuttle, Ok Posts: 9,243	Re: 1969 Short Wide Ouch John... Probably better though Heck one of mine might be done by then Posted via Mobile Device __________________ Scott 93 crew cab build Project 62 Last edited by scotts62; 12-01-2010 at 10:55 AM.

12-12-2010, 11:07 PM	#264
mcbassin Still Learning Join Date: Jul 2009 Location: Central Oklahoma Posts: 10,108	Re: 1969 Short Wide I don't think this one will be completed any time soon, but hey I have to try. Got a little progress done this weekend. Finished stripping the frame, got it read to be blasted or wire wheel cleaned on the bottom. I would really like to blast it if I can make it happen. I was able to pick up the lower control arm at Pull a part last week. Got them all blasted and primered. (forgot pics). All I need now is some cash to get rolling on this thing. Here are the pics: __________________ Mike "69 Short Wide" My Project 86 Silverado Landen's Project Instagram: @mcbassin My Website C/10 Club Oklahoma Facebook Group

12-13-2010, 01:24 AM	#265
67chevy1series Registered User Join Date: Mar 2010 Location: a t w a t e r cali 95301 Posts: 10,713	Re: 1969 Short Wide man that a arm is clean

12-13-2010, 09:17 AM	#267
JohnC Registered User Join Date: Feb 2009 Location: Oklahoma Posts: 7,461	Re: 1969 Short Wide Looking good Mike.

12-13-2010, 09:19 AM	#268
my67chevytruck Under Construction Join Date: Oct 2007 Location: Midlothian,TX (DFW) Posts: 4,555	Re: 1969 Short Wide nice progress Mike.... __________________ Heath subscribe to the board here: http://67-72chevytrucks.com/vboard/payments.php http://67-72chevytrucks.com/vboard/s...d.php?t=157669 FAQ how to's 1956 Chevy Apache 1967 C10 SWB FleetSide (under construction) 1969 K10 SWB FleetSide (Future Build) 1972 C10 SWB Stepside (Future Build) 56 chevy truck : http://www.cardomain.com/ride/2955823/1 67 truck build: http://www.67-72chevytrucks.com/vboard/showthread.php?t=281357/1 69 k10: http://67-72chevytrucks.com/vboard/s...d.php?t=389470

12-13-2010, 09:20 AM	#269
scotts62 One day... Join Date: Apr 2008 Location: Tuttle, Ok Posts: 9,243	Re: 1969 Short Wide Man your going to have two built before i get one... na man looking good! __________________ Scott 93 crew cab build Project 62

12-13-2010, 04:46 PM	#270
STOCKISH Formerly- 1972SuperCheyenne Join Date: Oct 2008 Location: Wake Forest NC Posts: 5,782	Re: 1969 Short Wide Looking good buddy! __________________ --Josh My Build Thread:http://67-72chevytrucks.com/vboard/s...d.php?t=799218 A good crossthread is better than Loctite any day. Life is not about what you have, but who you have to share it with.

12-25-2010, 06:30 AM	#271
87 chevy silverado Account Suspended Join Date: Apr 2009 Location: lexington South Carolina Posts: 2,124	Re: 1969 Short Wide nice build

12-25-2010, 12:20 PM	#273
scotts62 One day... Join Date: Apr 2008 Location: Tuttle, Ok Posts: 9,243	Re: 1969 Short Wide So whats next on the "to do" list for it? __________________ Scott 93 crew cab build Project 62

12-25-2010, 03:35 PM	#275
67chevy1series Registered User Join Date: Mar 2010 Location: a t w a t e r cali 95301 Posts: 10,713	Re: 1969 Short Wide yes come new year i hope it is going to be a year where we can all produce what we want and drive em! the suspension is always the long techniqual part but you will get throught it , rememmber to take pictures . i will be watching



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.