Camaro Caliper Brackets - Page 11 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

ryserstine · 12-15-2013, 05:25 PM

Sorry disregard plunger that would be an issue if i were to change out the brake booster,and it sounds like thats not needed.Thanks for the help i'll post more pics when completed.

ls1nova71 · 12-16-2013, 04:17 AM

I need a set of these, but don't have time to read through 11 pages to find the price on the powder coated ones. I se a price for bare steel on the first page. I'll send a PM.

**Captainfab** · 12-17-2013, 12:27 AM

PM replied to

The satin black powder coating is an additional $28.00

Quote:

Originally Posted by ls1nova71

I need a set of these, but don't have time to read through 11 pages to find the price on the powder coated ones. I se a price for bare steel on the first page. I'll send a PM.

ls1nova71 · 12-17-2013, 03:31 AM

Think I'll go with the unpainted set. Will send PayPal right away. Thanks.

bL.A.zer90045 · 02-06-2014, 10:02 PM

do you make any brackets to accomadate the 98-02 fbody calipers?

**Captainfab** · 02-07-2014, 01:06 AM

No I do not.

Quote:

Originally Posted by bL.A.zer90045

do you make any brackets to accomadate the 98-02 fbody calipers?

crob35 · 02-07-2014, 02:17 AM

Will these work with the wilwood d52 calipers?

**Captainfab** · 02-07-2014, 02:28 AM

No, these only work with the '93-'97 F-body calipers. If you want to use the Wilwood D52 calipers, you will need my D52 brackets.

Quote:

Originally Posted by crob35

Will these work with the wilwood d52 calipers?

bL.A.zer90045 · 02-07-2014, 03:21 PM

Quote:

Originally Posted by Captainfab

No I do not.

ok,just asking as i have 5 sets of them(98-02 disc set-ups,gbody builder)so for the camaro brakets(94-97) with hardware it is 125.00 shipped? i would need them shipped to 87144.thanks!

**Captainfab** · 02-07-2014, 04:24 PM

The total for a bare steel set is $121.65. If you wish to have them in satin black powder coat, the total is $139.65.

dan468 · 02-07-2014, 08:43 PM

Regarding the corvette MC, front reservoir goes to front brakes and rear to rear? Just did my 64 lincoln and it was opposite so I thought I'd ask

**Captainfab** · 02-08-2014, 01:41 PM

I believe that is correct, but I'll have to verify that. Are the fittings different sizes? I was thinking that the general rule was that on masters that have equal size reserviors, that the front is front brakes and the rear is rear brakes.

dan468 · 02-09-2014, 08:31 PM

The rear port is the bigger one...

Thank you for making this bracket. It would have been much harder to make this work without it.

Search Keyword: Porterbuilt, dropmember, big block chevy

HomoMonkey · 02-13-2014, 08:34 PM

Hey CaptFab, want to order a bracket for Impala disc/Camaro caliper. sending paypal now.
Thanks

**Captainfab** · 02-14-2014, 12:20 AM

Payment received and email sent

Quote:

Originally Posted by HomoMonkey

Hey CaptFab, want to order a bracket for Impala disc/Camaro caliper. sending paypal now.
Thanks

snipescastle2 · 08-26-2014, 12:27 PM

ryserstine,
what is the bracket shown in this picture? or is that some sort of JIG for welding/fabrication? if you don't mind me asking?great work! that bracket caught my eye, just wondering what it's for.....

Ben

**Captainfab** · 08-26-2014, 11:29 PM

If you are talking about the bracket that is below and behind the caliper, that is the panhard bar mount that is on the NASCAR trailing arms.

snipescastle2 · 08-27-2014, 09:29 AM

that's a pretty stout looking bracket, I was just wondering what it was for, never seen one of those before.....
Thanks Captainfab!
Ben

weav1 · 01-13-2015, 06:04 PM

Are you still making these brackets

Tims71 · 01-13-2015, 09:55 PM

That bracket is on the end of the trailing arm and where the adjustable track bar mounts

**Captainfab** · 01-14-2015, 12:33 AM

Yes I still make these as well as all of my other products

Quote:

Originally Posted by weav1

Are you still making these brackets

Tom · 01-23-2015, 05:18 PM

Quote:

Originally Posted by Captainfab

Yes I still make these as well as all of my other products

Mother of god......I don't know how I've never seen this before with all my years on the board, but I am so glad I finally did!!!! I'm in the middle of a full repaint on my '98 but the rear brakes are next on the list after paint. Thank you for offering these!!!

**Captainfab** · 01-24-2015, 02:02 AM

I do not yet make any rear disc brackets for the '88-'98 trucks. I keep hoping to find the time to work on those, but with working 70-80 hrs a week every week, time is scarce. Does your truck have the 8.5" 10 bolt or the 9.5" 14 bolt?

Quote:

Originally Posted by Tom

Mother of god......I don't know how I've never seen this before with all my years on the board, but I am so glad I finally did!!!! I'm in the middle of a full repaint on my '98 but the rear brakes are next on the list after paint. Thank you for offering these!!!

Crash'd Artwerks · 02-03-2015, 02:04 PM

What rotors can I use with these brackets and calipers to swap my truck to 4.75 bolt pattern?

I've seen Chevy Astro van rotors mentioned, but the obvious Camaro rotors that match the calipers would be nice to use.

**Captainfab** · 02-04-2015, 12:18 AM

The only rotor that can be used with these brackets without modification are the ones they are designed for.

The '93-'97 F-body rotors have a 5 x 4.65" wheel stud pattern, are smaller in diameter and a different height.

I have started on a different set of brackets for the trucks using the 5 x 4.75" wheel stud pattern, but I don't know when I will have time to finish them up.

Quote:

Originally Posted by Crash'd Artwerks

What rotors can I use with these brackets and calipers to swap my truck to 4.75 bolt pattern?

I've seen Chevy Astro van rotors mentioned, but the obvious Camaro rotors that match the calipers would be nice to use.

12-15-2013, 05:25 PM	#251
ryserstine Registered User Join Date: Dec 2012 Location: morgan hill ca. Posts: 15	Re: Camaro Caliper Brackets Sorry disregard plunger that would be an issue if i were to change out the brake booster,and it sounds like thats not needed.Thanks for the help i'll post more pics when completed.

12-16-2013, 04:17 AM	#252
ls1nova71 Registered User Join Date: Dec 2009 Location: Independence Mo Posts: 4,118	Re: Camaro Caliper Brackets I need a set of these, but don't have time to read through 11 pages to find the price on the powder coated ones. I se a price for bare steel on the first page. I'll send a PM. __________________ My '72 short bed build. http://www.ls1tech.com/forums/conver...6-0-4l80e.html 5.3 swap into my RUSTY '71 C10 http://ls1tech.com/forums/conversion...71-c-10-a.html

12-17-2013, 03:31 AM	#254
ls1nova71 Registered User Join Date: Dec 2009 Location: Independence Mo Posts: 4,118	Re: Camaro Caliper Brackets Think I'll go with the unpainted set. Will send PayPal right away. Thanks. __________________ My '72 short bed build. http://www.ls1tech.com/forums/conver...6-0-4l80e.html 5.3 swap into my RUSTY '71 C10 http://ls1tech.com/forums/conversion...71-c-10-a.html

02-06-2014, 10:02 PM	#255
bL.A.zer90045 Registered User Join Date: May 2012 Location: 90045 cali Posts: 568	Re: Camaro Caliper Brackets do you make any brackets to accomadate the 98-02 fbody calipers?

02-07-2014, 02:17 AM	#257
crob35 Registered User Join Date: Jan 2009 Location: albany,ga Posts: 82	Re: Camaro Caliper Brackets Will these work with the wilwood d52 calipers?

02-07-2014, 04:24 PM	#260
Captainfab 60-66 Nut Join Date: Mar 2007 Location: Coeur d'Alene, Idaho Posts: 23,252	Re: Camaro Caliper Brackets The total for a bare steel set is $121.65. If you wish to have them in satin black powder coat, the total is $139.65. __________________ Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE

02-07-2014, 08:43 PM	#261
dan468 Registered User Join Date: Nov 2006 Location: Sun City, Arizona Posts: 430	Re: Camaro Caliper Brackets Regarding the corvette MC, front reservoir goes to front brakes and rear to rear? Just did my 64 lincoln and it was opposite so I thought I'd ask __________________ 68 C-10 Build thread http://67-72chevytrucks.com/vboard/s...d.php?t=414699

02-08-2014, 01:41 PM	#262
Captainfab 60-66 Nut Join Date: Mar 2007 Location: Coeur d'Alene, Idaho Posts: 23,252	Re: Camaro Caliper Brackets I believe that is correct, but I'll have to verify that. Are the fittings different sizes? I was thinking that the general rule was that on masters that have equal size reserviors, that the front is front brakes and the rear is rear brakes. __________________ Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE

02-09-2014, 08:31 PM	#263
dan468 Registered User Join Date: Nov 2006 Location: Sun City, Arizona Posts: 430	Re: Camaro Caliper Brackets The rear port is the bigger one... Thank you for making this bracket. It would have been much harder to make this work without it. Search Keyword: Porterbuilt, dropmember, big block chevy __________________ 68 C-10 Build thread http://67-72chevytrucks.com/vboard/s...d.php?t=414699

02-13-2014, 08:34 PM	#264
HomoMonkey Registered User Join Date: Feb 2014 Location: Honolulu, HI Posts: 16	Re: Camaro Caliper Brackets Hey CaptFab, want to order a bracket for Impala disc/Camaro caliper. sending paypal now. Thanks

08-26-2014, 12:27 PM	#266
snipescastle2 Registered User Join Date: Mar 2009 Location: WARRENSBURG,MISSOURI,64093 Posts: 1,518	Re: Camaro Caliper Brackets ryserstine, what is the bracket shown in this picture? or is that some sort of JIG for welding/fabrication? if you don't mind me asking?great work! that bracket caught my eye, just wondering what it's for..... Ben Attached Images

08-26-2014, 11:29 PM	#267
Captainfab 60-66 Nut Join Date: Mar 2007 Location: Coeur d'Alene, Idaho Posts: 23,252	Re: Camaro Caliper Brackets If you are talking about the bracket that is below and behind the caliper, that is the panhard bar mount that is on the NASCAR trailing arms. __________________ Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE

08-27-2014, 09:29 AM	#268
snipescastle2 Registered User Join Date: Mar 2009 Location: WARRENSBURG,MISSOURI,64093 Posts: 1,518	Re: Camaro Caliper Brackets that's a pretty stout looking bracket, I was just wondering what it was for, never seen one of those before..... Thanks Captainfab! Ben

01-13-2015, 06:04 PM	#269
weav1 Registered User Join Date: Feb 2007 Location: plainfield indiana Posts: 283	Re: Camaro Caliper Brackets Are you still making these brackets

01-13-2015, 09:55 PM	#270
Tims71 Registered User Join Date: Dec 2014 Location: Kingston, TN Posts: 67	Re: Camaro Caliper Brackets That bracket is on the end of the trailing arm and where the adjustable track bar mounts



Register or Log In To remove these advertisements.

02-03-2015, 02:04 PM	#274
Crash'd Artwerks Registered User Join Date: May 2011 Location: McKinney, TEXAS ! Posts: 84	Re: Camaro Caliper Brackets What rotors can I use with these brackets and calipers to swap my truck to 4.75 bolt pattern? I've seen Chevy Astro van rotors mentioned, but the obvious Camaro rotors that match the calipers would be nice to use.

Register or Log In To remove these advertisements.