OR Parting out 72 GMC K20 4x4 350-TH350 - Page 11 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

1972K20 · 12-07-2014, 08:58 PM

Hello, do you still have these shackle mounts (circled in red)?

**tll74** · 12-08-2014, 02:19 AM

Quote:

Originally Posted by 1972K20

Hello, do you still have these shackle mounts (circled in red)?

Yes, 25.00 each and 15.00 shipping. Thanks, Tom

1972K20 · 12-08-2014, 04:51 PM

I'll take'm. PM sent.

1972K20 · 12-14-2014, 07:32 PM

Got the parts yesterday, thanks!

808turbo · 12-19-2014, 12:35 AM

Hi, do you have the GMC park lamp wiring avalible? How much shipped for 2 to 96797?

Thanks Dean

**tll74** · 12-20-2014, 02:32 AM

Quote:

Originally Posted by 808turbo

Hi, do you have the GMC park lamp wiring avalible? How much shipped for 2 to 96797?

Thanks Dean

Sure, no problem. 27.00 shipped Thanks, Tom

808turbo · 12-20-2014, 12:13 PM

Thanks, I'll take them. How do you want payment?

Thanks

808turbo · 12-23-2014, 09:24 PM

Cancel my request, sorry I found a set with lights.

DLTruck1973 · 02-04-2015, 01:46 PM

Photos are for member gmc 2500 4x4 (Paul)

Here are photos of a set of the blue dials on behalf of tll74 (Tom) I am posting.

They are in great mechanical condition and the dials turn freely. As you can see in the photos, there are some hair line cracks in the dials near the pins. There are no broken pieces.

The price is $300.00 plus shipping, if interested.

Thank you,
Thomas

DLTruck1973 · 02-04-2015, 01:47 PM

Photos of the other hub

**First c10** · 02-04-2015, 05:10 PM

Tom,
nice collection or trucks and parts. I was wondering if you still have a set of front leaf shackles/hanger mounts for a 69 up k10? Cost with shipping to 93635?
Thanks Scott

lucky71gmc · 02-05-2015, 12:03 AM

I have a 1972 Chevrolet 1/2 ton 4 X 4 short bed frame under a 1970 GMC cab and front clip.
Looking for a drivers side front Spring hanger and radiator support mount. Don't know if 3/4 ton will be the same as 1/2 ton.

I would like your rear most cross member.

Didn't see your Transmission access cover, assume it is a high hump bolting into the cab. Mine is also an automatic TH 350 with a Dana 205. Can I see a picture?

Also need GMC front bumper brackets (supports) that come out at an angle from the frame to the bumper. Thanks Br.

**tll74** · 02-06-2015, 12:39 AM

Quote:

Originally Posted by First c10

Tom,
nice collection or trucks and parts. I was wondering if you still have a set of front leaf shackles/hanger mounts for a 69 up k10? Cost with shipping to 93635?
Thanks Scott

Scott, Yes I have everything either off from past trucks or still on a 72 K10 I just bought. Are you asking for both ends to mount the front springs?

Quote:

Originally Posted by lucky71gmc

I have a 1972 Chevrolet 1/2 ton 4 X 4 short bed frame under a 1970 GMC cab and front clip.
Looking for a drivers side front Spring hanger and radiator support mount. Don't know if 3/4 ton will be the same as 1/2 ton.

I would like your rear most cross member.

Didn't see your Transmission access cover, assume it is a high hump bolting into the cab. Mine is also an automatic TH 350 with a Dana 205. Can I see a picture?

Also need GMC front bumper brackets (supports) that come out at an angle from the frame to the bumper. Thanks Br.

40.00 on the mount
yes on tunnel cover pic coming soon
Ok on the cross member.
I'll have to check for the bumper brackets.

Thanks, Tom

**First c10** · 02-06-2015, 12:59 AM

Just the front shackle hangers which I think it's also the radiator mount together.

**First c10** · 02-06-2015, 01:01 AM

Quote:

Originally Posted by 1972K20

Hello, do you still have these shackle mounts (circled in red)?

I think the hangers/mount I am looking for are above the red circle..

DLTruck1973 · 02-06-2015, 12:45 PM

Quote:

Originally Posted by tll74

Scott, Yes I have everything either off from past trucks or still on a 72 K10 I just bought. Are you asking for both ends to mount the front springs?

40.00 on the mount
yes on tunnel cover pic coming soon
Ok on the cross member.
I'll have to check for the bumper brackets.

Thanks, Tom

Here are photos of the tunnel cover on behalf of tll74 (Tom)

**tll74** · 02-08-2015, 12:30 AM

Quote:

Originally Posted by First c10

I think the hangers/mount I am looking for are above the red circle..

Ok...those particular mounts are long gone. I do have more...40.00 each. Thanks, Tom

**29od1** · 02-08-2015, 01:01 AM

I need a front rear spring hanger for a K10 shipped to 67210.
Thanks,
David

lucky71gmc · 02-10-2015, 11:40 PM

Bare with my computer skills I think I was born before computers. I need the rear most frame plate place that the tail light wiring goes thru mine is z shaped about 33 inches long and 4 inches tall with a lip going different directions on the top and bottom. Again this for a 1972 1/2 Chev 4 X 4 frame. And if you find any Front bumper support brackets that go from the frame out to the bumper I need a pair of those as well. For a 4 wheel GMC bumper my Chevrolet ones won't work. Not sure how to access pay pal on this sight is there an ICON or something? Br.

**First c10** · 02-16-2015, 11:18 AM

Good morning Tom, I was wondering if you had a complete lwb 4x4 frame?

FlameOut · 02-16-2015, 12:07 PM

I got excited when I saw this thread, then I saw how old it was, but, I guess it wont hurt to ask. Would you have a crank and short water pump pulley for a 350 with driver side alternator? I also am in need of a top driver side alternator bracket, two mounting bolts for seat belts (and a set of black seat belts) and a 72-350 4x4 fan shroud

**tll74** · 02-17-2015, 02:26 AM

Quote:

Originally Posted by 29od1

I need a front rear spring hanger for a K10 shipped to 67210.
Thanks,
David

40.00 plus 20.00 shipping for the rear spring front hanger.

Quote:

Originally Posted by lucky71gmc

Bare with my computer skills I think I was born before computers. I need the rear most frame plate place that the tail light wiring goes thru mine is z shaped about 33 inches long and 4 inches tall with a lip going different directions on the top and bottom. Again this for a 1972 1/2 Chev 4 X 4 frame. And if you find any Front bumper support brackets that go from the frame out to the bumper I need a pair of those as well. For a 4 wheel GMC bumper my Chevrolet ones won't work. Not sure how to access pay pal on this sight is there an ICON or something? Br.

frame crossmember 40.00
Bumper brackets 25.00 each. I will have verify I have them.

Quote:

Originally Posted by First c10

Good morning Tom, I was wondering if you had a complete lwb 4x4 frame?

I have a 71-72 complete truck yet to part. Do you mean as a roller or just a bare frame less all bolt on's?

Quote:

Originally Posted by FlameOut

I got excited when I saw this thread, then I saw how old it was, but, I guess it wont hurt to ask. Would you have a crank and short water pump pulley for a 350 with driver side alternator? I also am in need of a top driver side alternator bracket, two mounting bolts for seat belts (and a set of black seat belts) and a 72-350 4x4 fan shroud

Yes on the pulleys...single groove crank and single groove water pump...15.00 each
Alt mount, both brackets 30.00
seat belt bolts free with other parts
set of black belts, three person. very nice. 150.00
4x4 fan shroud...85.00
all plus shipping

Thanks, Tom

**First c10** · 02-17-2015, 02:35 AM

Hey tom I guess I need to be more specific. What I am looking for is a complete 4x4 frame. No springs or steering. Or transmission mount. I don't need the engine mount crossmember either as I plane to do a ls swap. I do need all riveted mounts to remain on the frame. My frame has 56" rear springs. Can you measure your frame rear spring length as I ordered lift springs already.
I am thinking road trip unless you have a good way to ship.
Thanks Scott

FlameOut · 02-17-2015, 10:23 AM

Quote:

Originally Posted by tll74

Yes on the pulleys...single groove crank and single groove water pump...15.00 each
Alt mount, both brackets 30.00
seat belt bolts free with other parts
set of black belts, three person. very nice. 150.00
4x4 fan shroud...85.00
all plus shipping

Thanks, Tom

By any chance do you have a double groove crank pulley? I forgot to specify that I have power steering. Sorry

**tll74** · 02-18-2015, 01:14 AM

Quote:

Originally Posted by First c10

Hey tom I guess I need to be more specific. What I am looking for is a complete 4x4 frame. No springs or steering. Or transmission mount. I don't need the engine mount crossmember either as I plane to do a ls swap. I do need all riveted mounts to remain on the frame. My frame has 56" rear springs. Can you measure your frame rear spring length as I ordered lift springs already.
I am thinking road trip unless you have a good way to ship.
Thanks Scott

Road Trip!! Gas is cheap right now. Shipping would a deal killer.
I can measure the springs. They should be the stock length. I would do the bare frame as you mentioned for 450.00 Pics below of the 72 K10 truck yet to part.

Quote:

Originally Posted by FlameOut

By any chance do you have a double groove crank pulley? I forgot to specify that I have power steering. Sorry

I do have the double groove crank pulley but the second groove is not for the P/S. The P/S uses a separate pulley. One style is a cast iron 2 groove and the other is a stamped steel single groove. Your pump pulley will dictate which one you need.
2 groove crank...25.00
single groove stamped P/S...15.00
2 groove cast P/S...20.00

Thanks, Tom

12-07-2014, 08:58 PM	#251
1972K20 Registered User Join Date: Nov 2010 Location: Alabama Posts: 741	Re: Parting out 72 GMC K20 4x4 350-TH350 Hello, do you still have these shackle mounts (circled in red)? Attached Images

12-08-2014, 04:51 PM	#253
1972K20 Registered User Join Date: Nov 2010 Location: Alabama Posts: 741	Re: Parting out 72 GMC K20 4x4 350-TH350 I'll take'm. PM sent.

12-14-2014, 07:32 PM	#254
1972K20 Registered User Join Date: Nov 2010 Location: Alabama Posts: 741	Re: Parting out 72 GMC K20 4x4 350-TH350 Got the parts yesterday, thanks!

12-19-2014, 12:35 AM	#255
808turbo Registered User Join Date: Aug 2014 Location: Honolulu Posts: 57	Re: Parting out 72 GMC K20 4x4 350-TH350 Hi, do you have the GMC park lamp wiring avalible? How much shipped for 2 to 96797? Thanks Dean

12-20-2014, 12:13 PM	#257
808turbo Registered User Join Date: Aug 2014 Location: Honolulu Posts: 57	Re: Parting out 72 GMC K20 4x4 350-TH350 Thanks, I'll take them. How do you want payment? Thanks

12-23-2014, 09:24 PM	#258
808turbo Registered User Join Date: Aug 2014 Location: Honolulu Posts: 57	Re: Parting out 72 GMC K20 4x4 350-TH350 Cancel my request, sorry I found a set with lights.

02-04-2015, 01:46 PM	#259
DLTruck1973 Registered User Join Date: Jan 2015 Location: Junction City OR Posts: 1,758	Re: Parting out 72 GMC K20 4x4 350-TH350 Photos are for member gmc 2500 4x4 (Paul) Here are photos of a set of the blue dials on behalf of tll74 (Tom) I am posting. They are in great mechanical condition and the dials turn freely. As you can see in the photos, there are some hair line cracks in the dials near the pins. There are no broken pieces. The price is $300.00 plus shipping, if interested. Thank you, Thomas Attached Images

02-04-2015, 01:47 PM	#260
DLTruck1973 Registered User Join Date: Jan 2015 Location: Junction City OR Posts: 1,758	Re: Parting out 72 GMC K20 4x4 350-TH350 Photos of the other hub Attached Images

02-04-2015, 05:10 PM	#261
First c10 Registered User Join Date: Dec 2012 Location: Los Banos CA Posts: 2,705	Re: Parting out 72 GMC K20 4x4 350-TH350 Tom, nice collection or trucks and parts. I was wondering if you still have a set of front leaf shackles/hanger mounts for a 69 up k10? Cost with shipping to 93635? Thanks Scott __________________ 1956 Chevy Bel Air 2 door 1956 Chevy 210 4 Door 1970 K20 LWB project the Hulk build w/Supercharged 4.8L-ly2/4L60E HULK BUILD 1970 C10 Yellow/White Deluxe LWB w/ 5.3L-LC9/6L80E 1968 K10 LWB Dark green my son calls it "THE HULK Jr"HULK JR SOLD GO GO!!! Last edited by First c10; 02-05-2015 at 01:53 AM.

02-05-2015, 12:03 AM	#262
lucky71gmc Registered User Join Date: Jan 2013 Location: Salt Lake City Utah Posts: 19	Re: Parting out 72 GMC K20 4x4 350-TH350 I have a 1972 Chevrolet 1/2 ton 4 X 4 short bed frame under a 1970 GMC cab and front clip. Looking for a drivers side front Spring hanger and radiator support mount. Don't know if 3/4 ton will be the same as 1/2 ton. I would like your rear most cross member. Didn't see your Transmission access cover, assume it is a high hump bolting into the cab. Mine is also an automatic TH 350 with a Dana 205. Can I see a picture? Also need GMC front bumper brackets (supports) that come out at an angle from the frame to the bumper. Thanks Br.

02-06-2015, 12:59 AM	#264
First c10 Registered User Join Date: Dec 2012 Location: Los Banos CA Posts: 2,705	Re: Parting out 72 GMC K20 4x4 350-TH350 Just the front shackle hangers which I think it's also the radiator mount together. __________________ 1956 Chevy Bel Air 2 door 1956 Chevy 210 4 Door 1970 K20 LWB project the Hulk build w/Supercharged 4.8L-ly2/4L60E HULK BUILD 1970 C10 Yellow/White Deluxe LWB w/ 5.3L-LC9/6L80E 1968 K10 LWB Dark green my son calls it "THE HULK Jr"HULK JR SOLD GO GO!!!

02-08-2015, 01:01 AM	#268
29od1 Registered User Join Date: Oct 2006 Location: Wichita, Kansas Posts: 1,050	Re: Parting out 72 GMC K20 4x4 350-TH350 I need a front rear spring hanger for a K10 shipped to 67210. Thanks, David

02-10-2015, 11:40 PM	#269
lucky71gmc Registered User Join Date: Jan 2013 Location: Salt Lake City Utah Posts: 19	Re: Parting out 72 GMC K20 4x4 350-TH350 Bare with my computer skills I think I was born before computers. I need the rear most frame plate place that the tail light wiring goes thru mine is z shaped about 33 inches long and 4 inches tall with a lip going different directions on the top and bottom. Again this for a 1972 1/2 Chev 4 X 4 frame. And if you find any Front bumper support brackets that go from the frame out to the bumper I need a pair of those as well. For a 4 wheel GMC bumper my Chevrolet ones won't work. Not sure how to access pay pal on this sight is there an ICON or something? Br.

02-16-2015, 11:18 AM	#270
First c10 Registered User Join Date: Dec 2012 Location: Los Banos CA Posts: 2,705	Re: Parting out 72 GMC K20 4x4 350-TH350 Good morning Tom, I was wondering if you had a complete lwb 4x4 frame? __________________ 1956 Chevy Bel Air 2 door 1956 Chevy 210 4 Door 1970 K20 LWB project the Hulk build w/Supercharged 4.8L-ly2/4L60E HULK BUILD 1970 C10 Yellow/White Deluxe LWB w/ 5.3L-LC9/6L80E 1968 K10 LWB Dark green my son calls it "THE HULK Jr"HULK JR SOLD GO GO!!!

02-16-2015, 12:07 PM	#271
FlameOut Registered User Join Date: May 2014 Location: Pittsburgh, PA Posts: 712	Re: Parting out 72 GMC K20 4x4 350-TH350 I got excited when I saw this thread, then I saw how old it was, but, I guess it wont hurt to ask. Would you have a crank and short water pump pulley for a 350 with driver side alternator? I also am in need of a top driver side alternator bracket, two mounting bolts for seat belts (and a set of black seat belts) and a 72-350 4x4 fan shroud __________________ Bill 2004 Chevy Silverado Z71 Ext Cab 1500 1972 Chevy K-10 SOLD 1967 Chevelle SS



Register or Log In To remove these advertisements.

02-17-2015, 02:35 AM	#273
First c10 Registered User Join Date: Dec 2012 Location: Los Banos CA Posts: 2,705	Re: Parting out 72 GMC K20 4x4 350-TH350 Hey tom I guess I need to be more specific. What I am looking for is a complete 4x4 frame. No springs or steering. Or transmission mount. I don't need the engine mount crossmember either as I plane to do a ls swap. I do need all riveted mounts to remain on the frame. My frame has 56" rear springs. Can you measure your frame rear spring length as I ordered lift springs already. I am thinking road trip unless you have a good way to ship. Thanks Scott __________________ 1956 Chevy Bel Air 2 door 1956 Chevy 210 4 Door 1970 K20 LWB project the Hulk build w/Supercharged 4.8L-ly2/4L60E HULK BUILD 1970 C10 Yellow/White Deluxe LWB w/ 5.3L-LC9/6L80E 1968 K10 LWB Dark green my son calls it "THE HULK Jr"HULK JR SOLD GO GO!!!

Register or Log In To remove these advertisements.