Facebook Finds

[Wikid61]

$4000.https://www.facebook.com/marketplace...8-1be3fbda339c

[Wikid61]

1980 Chevy C10. This has been a fun little truck to tinker with but the time has come where I need to sale it. I have done a bunch of work to it. It has a ZZ4 crate motor with a little over 15k on it, last fall. The engine has a Serpentine belt setup. Practically new Wienad street performance intake edelbrock 650 AVS series carb. Accel bullet distributor with 8.0mm wire NGK's. MSD cap, coil, and ingintion module in the distributor. Heat wrapped long tube hooker headers brand new exhaust flowmaster muffler. It sounds great. I put a 12 cuircut painless wiring harness in along with new lights. Starter, electric fans electric edelbrock fuel pump. I also custom installed the white faced autometer gauges. As well as a 4 switch panel for fuel pump, fans, a future led light bar, and voltage display with USB ports. I have Done a full brake job last spring rotors pads and calipers into the front new brake shoes hardware and drums in the rear. new brake booster and master cylinder.
Brigham City, $8500. https://www.facebook.com/marketplace...3A108%7D%22%7D

[Wikid61]

$4500. **READING IS KEY. Please read the ad. Thx!
Not interested in lowball offers. Price is firm and will increase as time & money is put into this. Runs and drives good!
Just recently purchased this 4x4 and had intentions of doing the body work and selling it for much more. It’s a collectors item. This is still in really good shape, what rust you can see has not made it to interior panels. So it can be fixed without breaking the bank. Parts are a dime a dozen for these things. You can still purchase pretty much every part and body panel and make it all brand new. Has no A/C as you can see in the picture.

I can go through the little issues that I’ve found if you need, but keep in mind if I do more work until it’s sold, the price will be affected accordingly. This has the option 5.7 liter with a TH350 transmission. Original owner installed Edelbrock carb. Truck was originally white. Looks like Maaco style spray and run was done to it. Have a blue rear seat, too. Thanks!!
Erie, CO
https://www.facebook.com/marketplace...3A108%7D%22%7D

[Wikid61]

$550. https://www.facebook.com/marketplace...Anull%7D%22%7D

[Wikid61]

$2500. ‘83 GMC 1 ton with an overload system, and a transmission driven pto pump. The pump is intact and functional. Has a gooseneck hitch as well. The odometer is correct. Has the 350 with a 4 speed. New gas tank. New wiper motor. New battery. New front brake lines. New fuel pump. New plugs and wires. All new components inside distributor with new cap and rotor. Just put new tires on 6/19. I am the second owner. $2500 https://www.facebook.com/marketplace...3A108%7D%22%7D

[Wikid61]

$2700. POSTED FOR A FRIEND, message me for his #

1974 Chevy 4 x 4 three-quarter four-speed. Has hood and choice of completely rebuilt straight 6 292 zero miles. Or small block Chevy 350 with headers high-rise manifold performance carburetor. Also truck has a new 2 1/2 inch lift. And a new 6 inch lift kit comes with it. Clean title $2700. https://www.facebook.com/marketplace...3A108%7D%22%7D

[Wikid61]

Square Body Lovers, This is my 1986 GMC High Sierra 2500, 3/4 4WD, Manual Transmission. I completely restored this Truck 4 years ago. All new inside with vintage Bluetooth stereo. Pretty much new every all around the outside https://www.facebook.com/marketplace...3A108%7D%22%7D

[Wikid61]

https://www.facebook.com/marketplace...Anull%7D%22%7D ~NOTE: my comment, these are the kinds of ads that make surfing the 'net difficult to say the least. ONE pix, no other information at all. Only thing missing is the hose/wash bucket & half dried sun baked finish.

[Wikid61]

https://www.facebook.com/marketplace...0-59ac17216242

[Wikid61]

https://www.facebook.com/marketplace...6-a9860a1b0448

[Wikid61]

https://www.facebook.com/marketplace...6-a9860a1b0448

[Wikid61]

305 V8, AC, power windows, runs great. It shifts through all gears, but something isn't perfect about the shift points. I had a shop fixing it, and when I hadn't got it back after five weeks, I took it back. Everything is straight, bed in great shape, all original interior https://www.facebook.com/marketplace...6-a9860a1b0448

[Wikid61]

$3000. https://www.facebook.com/marketplace...d-64e019d3a7a0

[Wikid61]

1974 Chevy C20 Custom Deluxe with 454 motor. Automatic transmission, gas. Runs and drives great

Brand new tires. Minimal rust on body, frame is in great shape. Bed is newer

Truck is an amazing truck, everything you could want.

Located in New Auburn. Will bring to Eau Claire for serious buyer with cash on hand. $6000. https://www.facebook.com/marketplace...Anull%7D%22%7D

[Wikid61]

Parting out a 79 Chevy truck. Grille And nose should be 80-81 I have many other square body’s out back to part out some with titles some without. All parts are a $10 minimum. Whole trucks will be $700. Sorry I’m not gonna accept scrap price on square body’s Would like to see these trucks go back on the road or parts help someone with a project, as always we buy junk cars trucks suvs and cats https://www.facebook.com/marketplace...Anull%7D%22%7D

[Wikid61]

1983 Chevy PU Custom Deluxe10 250ci engine. Long wheel base. New gas tank and lines. New starter, water pump, hoses, belts, electric fuel pump, new seat covers. Good tires, Good Body. $4000.https://www.facebook.com/marketplace...a-0f58594a5a6f

[Wikid61]

1979 short stepside, rust free, one small dent in tailgate, 355 /350 trans , engine is fresh trans rebuilt, aluminum intake new 4 barrel carb, new break system, long tube headers, dual exhaust, have all outer trim and bumper new heater core, 2 nice grills, very solid truck, price is $4500 if serious texte for phone number https://www.facebook.com/marketplace...a-0f58594a5a6f

[Wikid61]

$3500. 305 V8, AC, power windows, runs great. It shifts through all gears, but something isn't perfect about the shift points. I had a shop fixing it, and when I hadn't got it back after five weeks, I took it back. Everything is straight, bed in great shape, all original interior. https://www.facebook.com/marketplace...a-0f58594a5a6f

[Wikid61]

https://www.facebook.com/marketplace...a-0f58594a5a6f

[Wikid61]

$4000. Your looking at my super clean 1987 GMC sierra 1500 classic patina truck nicknamed “Annie Oakley” 350/700r4 98% rust free. Quartz clock still works! Rockers, cab corners, and floors are all in great shape, only rust spot is behind the passenger side rear quarter. Interior is very clean. The truck runs and drives flawlessly with no issues. AC blows cool, but not ice cold. Wouldn’t be afraid to hop in it and drive to California! New parts include: flowmaster super 10 exhaust, front brakes and rotors, spark plugs, rotor bug, and distributor cap, fuel filter, air filter, pcv valve, seat cover, and dash cover. I believe at some point the transmission was rebuilt, as it shifts very well through all the gears. Would make a great shop truck, or daily driver. Feel free to message me with any questions or to set up a time to take a look at this beauty! No trades, cash is king. I will not respond to low ball offers. Thanks for looking!
Asbury, MO
Location is approximate
Seller Information
Mike Hymer

[Wikid61]

Selling a 84 Chevy C10 with a 383 stroker. Has been lowered 4/6 inch drop with white wall 20's. The truck is in great shape. Just added electronic cut off vales, but haven't placed the switch on the dash yet. It does have a few issues, like: fuel guage not reading, horn not working, and unknown actual miles. I bought it with the motor put in with a few hundred miles and I didn't drive it too much. It comes with extra parts. Asking $20k obo and don't need help selling it. Looking for cash towards a newer vehicle. https://www.facebook.com/marketplace...a-0f58594a5a6f

[Wikid61]

$4000. https://www.facebook.com/marketplace...a-0f58594a5a6f

[Wikid61]

$18K 1978 Suburban Silverado.
400sbc, 350 turbo, 4x4, working factory cold A/C, factory tow package, with factory trailer brake controller. Original radio, crank windows.
Nothing has really been messed with. Runs great. Everything works as it should.
I purchased a AFI fuel injection set-up, but hasn't been installed, will included with the sale.
It's not original paint, but was repainted at some point in time to match factory. It was repainted with single stage just like was done in 1978.
Looking for serious buyers, no low balls.
Located in Merriam, ks https://www.facebook.com/marketplace...3A108%7D%22%7D

[Wikid61]

https://www.facebook.com/marketplace...4-7af70d0eb555 https://www.facebook.com/marketplace...4-7af70d0eb555

[Wikid61]

1975 C10 silverado short bed project. Factory 454, a/c cab. Rust free GM fenders. All original interior and trim. New inner and outer rockers and cab corners included. No motor, transmission or bed. Clean ky title. Asking $2,600. https://www.facebook.com/marketplace...4-7af70d0eb555