67 cheby's Dropmember build thread (CLOUD 9) - Page 116 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

VA72C10 · 01-06-2012, 12:54 AM

I'd rock one. I had an xb as a company vehicle...put a bunch of miles on it with no issues and good mpg, great head and legroom for me. Would be cool to have one that looked like our trucks!

gringoloco · 01-06-2012, 01:01 AM

Was trying to link these: http://www.lighting.philips.com/us_e...motive&lang=en

$26 on amazon...
Posted via Mobile Device

VA72C10 · 01-06-2012, 01:32 AM

Quote:

Originally Posted by gringoloco

Was trying to link these: http://www.lighting.philips.com/us_e...motive&lang=en

$26 on amazon...
Posted via Mobile Device

wondering how fast they'll burn out. I love the light output of silverstars but they lasted just under a year in my wife's van with very limited nighttime driving....

68 TT · 01-06-2012, 02:58 AM

I run theses in everything I can that is a street car.

Great light level at a reasonable price and they last a decent amount of time. The color is whiter than the typical H4 ones marketed here.

http://www.powerbulbs.com/product/os...r-h4-two-bulbs

For off road vehicles I like these

Amazon.com: HELLA HLA-H83140141 H4 12V 100/55W...

Street legal low beam but brutal high beam that I swear will melt the chrome off the front bumper.

**fakerwade** · 01-06-2012, 03:08 AM

Quote:

Originally Posted by 68 TT

I run theses in everything I can that is a street car.

Great light level at a reasonable price and they last a decent amount of time. The color is whiter than the typical H4 ones marketed here.

http://www.powerbulbs.com/product/os...r-h4-two-bulbs

For off road vehicles I like these

Amazon.com: HELLA HLA-H83140141 H4 12V 100/55W Halogen Bulb Off Road Use: Automotive

Street legal low beam but brutal high beam that I swear will melt the chrome off the front bumper.

Hey 68tt, your link to the Nightbreakers worked but the link to the Hella's didn't, Those Nightbreakers look interesting, thanks for the tip!

68 TT · 01-06-2012, 03:58 AM

Quote:

Originally Posted by fakerwade

Hey 68tt, your link to the Nightbreakers worked but the link to the Hella's didn't, Those Nightbreakers look interesting, thanks for the tip!

That is funny. The link in my response doesn't work but the one in yours quoting mine does.

gringoloco · 01-06-2012, 10:04 AM

Quote:

Originally Posted by VA72C10

wondering how fast they'll burn out. I love the light output of silverstars but they lasted just under a year in my wife's van with very limited nighttime driving....

I've had the same experience with silverstars. Reviews on the extremes say they have much better longevity

Quote:

Originally Posted by 68 TT

I run theses in everything I can that is a street car.

Great light level at a reasonable price and they last a decent amount of time. The color is whiter than the typical H4 ones marketed here.

http://www.powerbulbs.com/product/os...r-h4-two-bulbs

For off road vehicles I like these

Amazon.com: HELLA HLA-H83140141 H4 12V 100/55W Halogen Bulb Off Road Use: Automotive

Street legal low beam but brutal high beam that I swear will melt the chrome off the front bumper.

...and probably melt the connector/harness. The 9008/h13 have small contacts, so upping the wattage is risky. The nightbreakers look interesting

Quote:

Originally Posted by fakerwade

Hey 68tt, your link to the Nightbreakers worked but the link to the Hella's didn't, Those Nightbreakers look interesting, thanks for the tip!

Weird- amazon did the same to me
Posted via Mobile Device

**67cheby** · 01-06-2012, 10:29 AM

Quote:

Originally Posted by gringoloco

Was trying to link these: http://www.lighting.philips.com/us_e...motive&lang=en

$26 on amazon...
Posted via Mobile Device

are these the ones you are going to go with ??

**67cheby** · 01-06-2012, 10:31 AM

HOLY SMOKES...i think i am more confused then ever..with all of these bulb choices !! Thanks for all of the links everyone !

**67cheby** · 01-06-2012, 10:33 AM

Quote:

Originally Posted by funkytechmonkey

Haha.. it looks like the squished trucks in the PhotoShop section. Those are awesome.
Posted via Mobile Device

LOL, i agree, pretty cool though !

gringoloco · 01-06-2012, 11:29 AM

Quote:

Originally Posted by 67cheby

are these the ones you are going to go with ??

Mine are supposed to have stock bulbs in them; we'll see when they arrive.

Adding to the confusion: Here's a plug and play harness, if you don't wanna cut your stock wiring:
http://www.puredieselpower.com/catal...s-p-20965.html

**67cheby** · 01-10-2012, 10:42 AM

been having a little fun the last couple days, inspired by ATVPRO on his work station, i am building a welding station for my new welder, $60 bucks in tubing and a bottom of an old tool box and this is what i am coming up with ! i wanted a couple drawers to put , welding clamps/ wire/ misc and a little section of work bench, so anyway here is my start to my welding station. I have alot more work to go but at this point i only have about 4 hours in it

**67cheby** · 01-10-2012, 10:43 AM

and if you dont think that is an old tool box , check out my MINITRUKIN sticker circa 1990 !! LOL

**67cheby** · 01-10-2012, 10:46 AM

I also had time to mess with a couple other little projects, mount for my valve block and breathers for my valve covers (i am thinking about shortening the breather , so they dont stick up so high)

VA72C10 · 01-10-2012, 02:15 PM

Nice work on the cart. That should be super convenient...probably can keep about 90% of the tools you need in there since nearly everything bolted on our trucks uses 1/2", 9/16, or screws...add a hammer, pry bar, and some duct tape and you're set

Good spot for the accuair valve block. Should be a clean looking setup.

Not sure on options on the breathers...

**67cheby** · 01-10-2012, 02:19 PM

Yes i cant wait to get it all set up !! going to be super convenient yes with all of the metal working tools and the normal always grab tools and a BFH ! and the bottom is where i will store my cool welding helmet....once i get one !

watahyahknow · 01-10-2012, 02:21 PM

had the same thing with the breathers , but havent seen them on the engine yet
i do wonder if theres nothing in the way of the opening when there mounted , i can immagine the first rocker and springs sitting in front of it

**67cheby** · 01-10-2012, 02:23 PM

yes they do clear the rockers

raull · 01-10-2012, 03:04 PM

i agree with shortening breathers !!!!!

**67cheby** · 01-10-2012, 03:12 PM

i think i can take about 1 inch out of them, i will probably smooth off the tops where they wont be scripted with eldelbrock also

raull · 01-10-2012, 03:14 PM

yes i like that smooth off the tops idea also !!!

es67chevy · 01-10-2012, 05:16 PM

Quote:

Originally Posted by 67cheby

i think i can take about 1 inch out of them, i will probably smooth off the tops where they wont be scripted with eldelbrock also

Get your dremel out and etch "C-10" in them

**67cheby** · 01-10-2012, 05:17 PM

that would look cool !

VA72C10 · 01-10-2012, 05:19 PM

Quote:

Originally Posted by raull

yes i like that smooth off the tops idea also !!!

Or you can do the chevrolet script...that'd be fun to do free-hand with a dremel

watahyahknow · 01-10-2012, 06:48 PM

i think you could just flatten the tops on a beltsander to get the edelbrock logo off and then do a chemical eching same way they do to the copper electric circuitboards , maybe you could put "hartbeat of america" on them in small fond , it would be waaaaay simpler than trying to carve it out with a dremel

come to think of it you could use a red copper coverplate over the logo and use the same bolds to hold it on top , age it intoo black reworka little with steelwhool so it looks like a jeansbutton and then just keep it that way

01-06-2012, 12:54 AM	#2876
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	Re: 67 cheby's Dropmember build thread I'd rock one. I had an xb as a company vehicle...put a bunch of miles on it with no issues and good mpg, great head and legroom for me. Would be cool to have one that looked like our trucks! __________________ Looking for a 67-72 swb or blazer project in or around VA.

01-06-2012, 01:01 AM	#2877
gringoloco A guy with a truck Join Date: Sep 2005 Location: Germany, for now Posts: 5,921	Re: 67 cheby's Dropmember build thread Was trying to link these: http://www.lighting.philips.com/us_e...motive&lang=en $26 on amazon... Posted via Mobile Device __________________ -Chris Instagram _elgringoloco_ '70 Short-Wide How to: Ruin a perfectly good C10 ‘70 Blazer ConversionHow To: Ruin a Perfectly Good 4wd '72 Highlander How To: Ruin a Perfectly Good K/5 (SOLD) '72 Blazer 2WD How to: Ruin a perfectly good Blazer (SOLD) '05 Yukon Daily Driven (not so stock) Yukon (SOLD) ‘07 Yukon Denali (daily) Members met list: SCOTI, darkhorse970, 67cheby, 67cheby'sGirl, klmore, porterbuilt, n2billet, Fastrucken, classicchev, Col Clank, GSFMECH, HuggerCST, Spray-Bomb, BACKYARD88, 5150, fine69, fatbass, smbrouss70, 65StreetCruiser, GAc10boy

01-06-2012, 02:58 AM	#2879
68 TT Still plays with trucks Join Date: Jul 2009 Location: Spokane, WA Posts: 3,556	Re: 67 cheby's Dropmember build thread I run theses in everything I can that is a street car. Great light level at a reasonable price and they last a decent amount of time. The color is whiter than the typical H4 ones marketed here. http://www.powerbulbs.com/product/os...r-h4-two-bulbs For off road vehicles I like these Amazon.com: HELLA HLA-H83140141 H4 12V 100/55W... Street legal low beam but brutal high beam that I swear will melt the chrome off the front bumper. __________________ miSSed opportunity - ground up creation of an AWD 1994 454 SS that never was http://67-72chevytrucks.com/vboard/s...d.php?t=795577 69 C10 shortbed stepside 400 small block - built like what a super sport truck could have been 69 K20 lwb TBI 350 4L60E NP208 14-bolt Dana-44 w/disc 68 Camaro SS / RS 500hp 439 inch roller cam big block 4L80E 79 Malibu TPI 350 4L60 w/ Z28 steering & sway bars

01-06-2012, 10:31 AM	#2884
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: 67 cheby's Dropmember build thread HOLY SMOKES...i think i am more confused then ever..with all of these bulb choices !! Thanks for all of the links everyone ! __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

01-10-2012, 10:42 AM	#2887
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: 67 cheby's Dropmember build thread been having a little fun the last couple days, inspired by ATVPRO on his work station, i am building a welding station for my new welder, $60 bucks in tubing and a bottom of an old tool box and this is what i am coming up with ! i wanted a couple drawers to put , welding clamps/ wire/ misc and a little section of work bench, so anyway here is my start to my welding station. I have alot more work to go but at this point i only have about 4 hours in it Attached Images __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

01-10-2012, 10:43 AM	#2888
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: 67 cheby's Dropmember build thread and if you dont think that is an old tool box , check out my MINITRUKIN sticker circa 1990 !! LOL __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

01-10-2012, 10:46 AM	#2889
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: 67 cheby's Dropmember build thread I also had time to mess with a couple other little projects, mount for my valve block and breathers for my valve covers (i am thinking about shortening the breather , so they dont stick up so high) Attached Images __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

01-10-2012, 02:15 PM	#2890
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	Re: 67 cheby's Dropmember build thread Nice work on the cart. That should be super convenient...probably can keep about 90% of the tools you need in there since nearly everything bolted on our trucks uses 1/2", 9/16, or screws...add a hammer, pry bar, and some duct tape and you're set Good spot for the accuair valve block. Should be a clean looking setup. Not sure on options on the breathers... __________________ Looking for a 67-72 swb or blazer project in or around VA.

01-10-2012, 02:19 PM	#2891
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: 67 cheby's Dropmember build thread Yes i cant wait to get it all set up !! going to be super convenient yes with all of the metal working tools and the normal always grab tools and a BFH ! and the bottom is where i will store my cool welding helmet....once i get one ! __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

01-10-2012, 02:21 PM	#2892
watahyahknow Registered User Join Date: Jul 2006 Location: the netherlands europe Posts: 4,335	Re: 67 cheby's Dropmember build thread had the same thing with the breathers , but havent seen them on the engine yet i do wonder if theres nothing in the way of the opening when there mounted , i can immagine the first rocker and springs sitting in front of it __________________ i got a job again and having fun at it too idea's for the trucks and the order of things to do are taking shape and get closer to being realized , a few more months and i be able to start building for real i complete 2 of the trucks intoo running fashion one custom and one basicly stock the thirth will be sacrificed for parts

01-10-2012, 02:23 PM	#2893
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: 67 cheby's Dropmember build thread yes they do clear the rockers __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

01-10-2012, 03:04 PM	#2894
raull Registered User Join Date: Mar 2009 Location: miramar florida Posts: 1,232	Re: 67 cheby's Dropmember build thread i agree with shortening breathers !!!!! __________________ check out my build thread 71 c/10 step side 5.3 twin turbo http://67-72chevytrucks.com/vboard/s...d.php?t=485320 raul

01-10-2012, 03:12 PM	#2895
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: 67 cheby's Dropmember build thread i think i can take about 1 inch out of them, i will probably smooth off the tops where they wont be scripted with eldelbrock also __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

01-10-2012, 03:14 PM	#2896
raull Registered User Join Date: Mar 2009 Location: miramar florida Posts: 1,232	Re: 67 cheby's Dropmember build thread yes i like that smooth off the tops idea also !!! __________________ check out my build thread 71 c/10 step side 5.3 twin turbo http://67-72chevytrucks.com/vboard/s...d.php?t=485320 raul

01-10-2012, 05:17 PM	#2898
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: 67 cheby's Dropmember build thread that would look cool ! __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172



Register or Log In To remove these advertisements.

01-10-2012, 06:48 PM	#2900
watahyahknow Registered User Join Date: Jul 2006 Location: the netherlands europe Posts: 4,335	Re: 67 cheby's Dropmember build thread i think you could just flatten the tops on a beltsander to get the edelbrock logo off and then do a chemical eching same way they do to the copper electric circuitboards , maybe you could put "hartbeat of america" on them in small fond , it would be waaaaay simpler than trying to carve it out with a dremel come to think of it you could use a red copper coverplate over the logo and use the same bolds to hold it on top , age it intoo black reworka little with steelwhool so it looks like a jeansbutton and then just keep it that way __________________ i got a job again and having fun at it too idea's for the trucks and the order of things to do are taking shape and get closer to being realized , a few more months and i be able to start building for real i complete 2 of the trucks intoo running fashion one custom and one basicly stock the thirth will be sacrificed for parts

Register or Log In To remove these advertisements.