How about some pics of '73-'87 Short Beds

[Oldschool82]

Hey thanks for going to the trouble of hunting down more pics. The white is pretty sweet. I don't like huge rims, but in this case, they are probably needed to keep that front piece from dragging. Over all, very nice and unique! Thanks again for the pic hunting you did!

Originally Posted by Chevy623

understandable man, unfortunatly, all i could find are these few of the truck inself. If you like, his Cardomain username is Charlysrt4 and you could try to contact him and get more that way.

[camshaftgsxr]

YouTube- cameron's 1984 chevy silverado burnout

i know its a pic thread but.. and ignore the moron in the drivers seat.. ain't he?


also it will do more (when its dry) but my buddy had his camera and i felt like showing just a small portion of my a$$ for the camera

[Rollinsqrbdy]

uhhhmmmmm, wheres the burnout? Lmao just kidding. Thats a nice ride. sounds good. Whatcha got?

[camshaftgsxr]

Originally Posted by Rollinsqrbdy

uhhhmmmmm, wheres the burnout? Lmao just kidding. Thats a nice ride. sounds good. Whatcha got?

i buy my own tires, that little one tire fire is all your gettin.. just a 355 with a 270h comp cam and a 600cfm holley, other than that nothing worth listing.

but i do know it'll leave a 300+ foot black mark from 15 miles an hour.. i don't know how it did it but it did... and no i'm not lying, but it was a while ago so the mark isn't there any more (how convenient huh?)

[texasfunk]

...

[Oldschool82]

Love this truck, I think I saw it for sale some were on line. I think ebay.
VERY NICE!

Originally Posted by texasfunk

...

[87 chevy silverado]

ya it was ebay

[BGRAFX]

Well I went to look a parts truck today....To make a shortbed crewcab.....But I think this poor chevy is done.

[Scootin 81 C20]

How bad is she underneath?

[BGRAFX]

Really bad! the owner said he just got it back after the truck was stolen and went through a 27 mile police chase. he was proud of his old chevy. but sad that it ended in a wreck. the frame is bent and as you can see the front wheel and suspension is crammed back to the firewall and the motor mounts are cracked because the engine twisted and flywheel is bent also.
I'm debated getting the hood and bed, and he has all original front grill lights etc.

[Scootin 81 C20]

If the cab and bed are good, I'm sure you can find a good frame or a buyer for the cab.

[TheSleeper]

some pics of my 87, "little red", my daily driver sun, rain, or snow. i put new tires on it and did put the centercaps back in, i dint realize i had them off still in these pics, was polishing the rims and had em out for a few days.

[Scootin 81 C20]

Nice truck Sleeper.

[TheSleeper]

was lookin back at the pics some more, and i would LOVE to have the headlight and grill setup like that white one has, that ever popular later model suburban lookin headlight and grill. id keep my stocky lookin bumper, tho LOL. be keepin my eyes open for the parts on the cheap when i get a little spare cash someday

the paints, the interiors, and mechanical work that goes into many are just flat amazing, just sheer artistry. people have poured blood, sweat, ( and life savings LOL)into their rides, and it shows.

i do lose interest on the "huge" rims, a fascination that has been the fad the last decade or more. I cant seem to get into them on, quite frankly, anything i have seen them on, whether trucks, muscle cars, suv's, whatever...maybe im gettin too old and it is a generational thing.

[texasfunk]

Originally Posted by Oldschool82

Love this truck, I think I saw it for sale some were on line. I think ebay.
VERY NICE!

yes it is nice! i love the pearl white! and sleeper that truck is nice! love the strips!

i switched from the billet grille to a stock piece, im going to use the signals in the grille, and the ones in the bumper for fog lights..i know the headlight buckets arent the right style for this yer, but i like them better..

[TheSleeper]

i cant believe how well the paint is holding up, its quite an older resto...it sat outside in arizona for a good part of last year, plus it was driven daily in montana in snow and crappy weather for over a year before that too. i moved to AZ and of course, had the wrong motor, well, everything mechanically wrong, to come close to passing any kind of emissions...sigh. ran awesome.

so i took motor out of the 87 and put in a 63 i bought for 1k, and swapped the eagle 2s over as well. later i then decided, hey im gonna get it legal, bought complete tbi 350 from a 93 caprice i think it was, with computer and wiring harness. i barely got the motor bolted in, never fired it, and moved to kansas, a non-emissions state. so wife drove her car and i followed in my 63, which ran flawless thank god, flew back, and hauled the 87 back behind the uhaul with our stuff.

i gathered up the points distributor, the old holley carb and intake manifold (i just reamed out the center holes) from the blown up 350 yanked from the 63. i bolted it all together and the sob ran, and didnt smoke or anything, i was so shocked LOL. god i love chevies, a early 70s dist, 93 350 engine, who knows what carb, fires up and runs.

i did have to replace the manifold tho, the waterjacket where it goes to the heater hose was cracked, prob how he blew up the motor in the first place. got a nice aftermarket carbureted intake manifold ($100) to fit the centerbolt heads, a new hei distributor($100), my old edlebrock 600 and the thing runs great.

i threw the old points dist and holley on the 63 for now till i can afford to replace it, and it runs pretty good, dint bother dialing it all in as im gonna replace that stuff, just wanted to drive it on nice days, keep seals good and stuff.

why i love my chebbies LOL.

[TheSleeper]

if you look at grill on mine, i really dont like it. it has like that wide white stripe, doesnt really go with anything else on the truck. the interior is like a smokey grey color, seats door panels, everything grey or black. almost like it came off a van or something, it just looks odd. it was coming apart too, i had to sorta hide some self tappers into the headlight buckets and grill to hold it all together, lot of the little plastic tabs and stuff broken off. i keep telling myself i will do something with it one of these days LOL.

[TheSleeper]

oh and i noticed the other day the chrome around the headlight bezels doesnt even match the center, the cab seems square to the frame, but the front clip is just crooked a hair. i never noticed it till i had it for a while and worked on it a bit, lot of stuff like that where they missed it by "that much".

i think it was put together on a saturday night, and beer was involved LOL. but its still my baby.

[383Chevy]

My 85' chevy stepside,383 stroker,world product heads,4.11 gears,3500 stall,33x12.5x15 BFG A/T's does high 13's low 14's in the 1/4 mile,will have vids and pics of it at the track in bout a week and a half.

[camshaftgsxr]

got anymore engine specs? what tranny? and what are your trap speeds? sweet truck!!

[Scootin 81 C20]

That is on sweet looking truck you got there. I'm diggin the front plate. Can I get a pic of the pinstriping on the front fenders?

Nice Vette too, by the way.

[383Chevy]

Originally Posted by Scootin 81 C20

That is on sweet looking truck you got there. I'm diggin the front plate. Can I get a pic of the pinstriping on the front fenders?

Nice Vette too, by the way.

Yea ill snap ya some here in a sec

Originally Posted by camshaftgsxr

got anymore engine specs? what tranny? and what are your trap speeds? sweet truck!!

What else ya wanna know bout the engine? has a turbo 350 with a shift kit trap speeds are around 105 ish with then big 33's and the gears are made for the 33's but its good enough i did do 13.02 at 112 with 315 drag radials

[383Chevy]

Heres a few more,the pinstriping then my chrome bumper,aluminum hitch and chrome ball. Prolly gonna end up redoing the pinstriping since its fading away

[watahyahknow]

you done those stripes realy nice they look superstraight on the pics
maibe the faiding is caused by (wax/dirt) resideu on the carpaint
a good paintprep should help before leying on the new stripes

[Oldschool82]

Nice truck sleeper!...Oh and 383chevy...you should send that motor right over to me so I can get it into my truck!