What did you do to your truck today?

[LeftCoast32]

Originally Posted by 198plus

This is way nice !!!!!!!!!!!!

Thanks! Everything is moving along slowly with the build.

[chainsaw]

Still scraping under fenders

[shortbed70]

Mounted my fuel pump, filter and line but too dark for pictures.
Posted via Mobile Device

[1Bad62Pro/Street]

Car Show today.





Another added to the pile.

[1/2Dozen]

Past two days got my rims painted black, bought some used tires and shaved the sidewalls down for a cheaper but good looking set of wide whites.

s***** looking trailer wheels that I rolled on all winter long just waiting for this day.

this was before to make sure they fit

me using flap disk

side shot

[bigtruckboi2000]

Changed the diff oil and learned what gears I have in it.

[Vernski]

Installed the weather stripping in both doors getting ready for carpet next....Vernski

[sams60gmc]

Mounted my steering rack, and made front inner fender wells, pretty productive day.

[jbgroby]

OH That looksGREAT Vernski.

Originally Posted by Vernski

Installed the weather stripping in both doors getting ready for carpet next....VernskiAttachment 743332

Attachment 743343

[knuckledragger]

pulled the cluster and disassembled and cleaned it.replaced all the bulbs,replace the turn signal switch

[mudderphil]

ripped the engine apart to make it lighter to pull out and went to go get its replacement to find out that some one stole it from my parents back yard

[Turkey]

Originally Posted by 1/2Dozen

Past two days got my rims painted black, bought some used tires and shaved the sidewalls down for a cheaper but good looking set of wide whites.

s***** looking trailer wheels that I rolled on all winter long just waiting for this day.

this was before to make sure they fit

me using flap disk

side shot

Very nice!!

[198plus]

Had to replace a roller lifter in my new BBC today Good thing it happened now and not later........What luck

[lakeroadster]

Originally Posted by Vernski

Installed the weather stripping in both doors getting ready for carpet next....Vernski:metal

Vernski, Looks awesome... who's weatherstripping did you use and do the doors close ok now?

[Rich 5150 69]

When I had installed mine back in `93, I had bought mine from LMC, did this in the hot sun so they would soften up, after install, closed doors and left them for a couple of days to take shape to the door and jam, turned out nice, needs to be done again, all wore off the lower kick panel from use..

[Vernski]

Originally Posted by lakeroadster

Vernski, Looks awesome... who's weatherstripping did you use and do the doors close ok now?

Yeah Lake I bought it from Brothers Trucks but it is made by Metro Supersoft Weatherstrip Minneapolis, Minnesota. At the moment I can't remember if it was Brothers for sure cause it was a couple of years ago and I suffer from CRS allot. And yes the doors close but are tighter than a nats ask me when they break in tight...Vernski

[Turkey]

Fixed a fuel leak at the carb, ordered a carb rebuild kit, and started on chrome trim removal.

[tazattitude]

Wetsanded, buffed, and installed my rad support, inner fenders, and fenders this week. Today put the Dynamat in.

Also,
installed the steering column this week
finalized the regulator fuel line location and installed
Installed the cowl corners
installed the overflow bottle on the rad support
Sent my oil pressure gauge back (LED light was more yellow than the other lights. Great service from Auto Meter!!!)

Ordering my elec speedo this week!!!
And....Ordering my wheels and tires tomorrow!!!!!!!!
FINALLY will have a roller. Heck, by the time I get them, I'll be able to at least do my maiden voyage!!!

[AllenKarber]

Made a ground strap from the bed to the frame. I'm going to try to drive it this weekend. I have to work 12 hrs tomorrow,and I was too tired to do anything else, I'll just wait until this weekend. The battery needs to be charged also.

[pdxhall]

I went and picked up another hood for my 66. the front brace on mine is rusted through on the passenger side so I thought I could use pieces from both and make one good hood. Turned out to be in pretty good shape and the front brace has no rust so I'm in business. I also picked up an original aluminum front grill for $20 bucks with a few dings, etc. but seems to be totally fixable. I was just wondering what these grills are going for these days? I was thinking they are getting hard to find. Was this a good deal or not? I am also wondering if any of you Portland area guys restore these or no someone that does?
I also prepped and got some primer on the power steering gear I picked up which cleaned up real nice and painted my front bumper brackets and motor mount brackets.
This weekend my son and a couple of friends are coming over to help me push the truck out of the garage and turn it abound so I can start on cleaning up and rebuilding the rear suspension, etc. (I've got limited room in my garage)

[chainsaw]

Still more scraping and sanding under fenders and frame. Painted the front of the frame and inner fenders (rattle can). This ones not going to be a body off build, just trying to get it to look simi good, then drive it.

[willyp]

taz, what wheels and tires are you getting?

[slepysal]

Originally Posted by jimmydean

Got my center stage mocked up.

what size speakers did you use ? looks good. any pics on how you mounted it ?

Originally Posted by Turkey

Very nice!!

x 2 very cool

Originally Posted by tazattitude

Wetsanded, buffed, and installed my rad support, inner fenders, and fenders this week. Today put the Dynamat in.

Also,
installed the steering column this week
finalized the regulator fuel line location and installed
Installed the cowl corners
installed the overflow bottle on the rad support
Sent my oil pressure gauge back (LED light was more yellow than the other lights. Great service from Auto Meter!!!)

Ordering my elec speedo this week!!!
And....Ordering my wheels and tires tomorrow!!!!!!!!
FINALLY will have a roller. Heck, by the time I get them, I'll be able to at least do my maiden voyage!!!

killer color combo !

[66farmer]

Originally Posted by pdxhall

I went and picked up another hood for my 66. the front brace on mine is rusted through on the passenger side so I thought I could use pieces from both and make one good hood. Turned out to be in pretty good shape and the front brace has no rust so I'm in business. I also picked up an original aluminum front grill for $20 bucks with a few dings, etc. but seems to be totally fixable. I was just wondering what these grills are going for these days? I was thinking they are getting hard to find. Was this a good deal or not? I am also wondering if any of you Portland area guys restore these or no someone that does?
I also prepped and got some primer on the power steering gear I picked up which cleaned up real nice and painted my front bumper brackets and motor mount brackets.
This weekend my son and a couple of friends are coming over to help me push the truck out of the garage and turn it abound so I can start on cleaning up and rebuilding the rear suspension, etc. (I've got limited room in my garage)

That's a great deal on the grill. There is a guy on craigs list that has a 1966 chevy that he is parting out. I talk to him this morning about his grill he is asking $200 Talking about a good deal I ran a add on Portland craigs list for the last 2 months looking for a drivers door for my 66. Sunday a guy called he said that he has one went to look he had both rust free very nice doors. I asked him how much $50 for both made my day. And I gave $25 for a pair of custom cad trim pieces and a pair of turn signal bezels.

[exoticmetalworx]

today i joined this forum did little on the truck just cut some big tubbing ill be using for mounts , i did however final moch my rear bags!!!!!!!!!!!!!!!! (crappy phone quality sorry lost my camera)

http://www.youtube.com/watch?v=sQkV4jS4dO0