What did you do to your truck today.The 3rd chapter

[Cali72K20]

Installing NOS door handles with the gaskets got from Seth and restored vent windows from Rodger. I don't remember who I got the handles from, sorry!

[zicc1835]

fit tested last night dropped off for paint this morning .....used the 55 grocery getter to transport

[4LUG39]

I've gotten some time off untill I start my new job so I started putting the disc
brakes and power steering set up on my '69.

[LNP]

Nice! I converted my 69 as well

[Steeveedee]

Went to a meetup in a nearby town and met 72sb in person. That is one really nice little pickup he has! Wandered around looking at vehicles. About 70 years worth were represented. Everything from Model T Fords to '80s Corvettes. What I have yet to do today is go and trouble shoot the truck. It started running lumpy on the way home from the meetup.

[67C10Step]

Dropped mine off at the shop for an alignment at 8:30, picked it up at 11:00. Drove it literally about three blocks and dropped it at the glass shop for a windshield. Hope to get a call tomorrow or Wednesday to come pick it up again.

[Steeveedee]

Checked the truck out, yesterday. As I suspected, it's loading up a little. Gonna get a carb kit. Looking for a plating kit, while I'm at it. Gonna make it look close to new, I hope.

[Steeveedee]

Rebuilt the carb. $280 for a plating kit, that ain't happening. I have a couple of adjustments to make, but they're going to wait until tomorrow. I can't take the heat under the hood when it's already in the '90s. At least the flooding condition is fixed.

[BC10]

I drove it until my back hurt, then had to drive it back.

[eneg688]

Got the b&m transmission cooler mounted & plumbed

[67ChevyPickupMan]

Cleaned up and painted some of the little screws for the heater box and found a couple other things to get done up.

[twoskies]

Took 72 to Friends shop to start teardown of motor
1979 350/4 bolt main, bought it with 80,000 on it, lol
put another 7500 on it in 3 years

going with Edelbrock Performer manifold to match the Edelbrock Carburetor
had a set of 202 heads machined and ready to go

taking the block to Same Machine shop in a couple days
30 over , probably going with rv cam, new oil pump and water pump

while motor is out, clean up frame and engine bay a little more

this is a before picture of engine bay

[Steeveedee]

Fixed the wiring on my kickdown switch. I rebuilt the carburetor earlier in the week and then the kickdown didn't work. There was quite the mousterpiece of a wiring job from a previous "mechanic". Looking good, now. I'll reinstall everything in the morning. I don't work well in the heat anymore.

[FL71C10]

Laid out my new aaw wiring harness to kind of get an idea of what's involved. Then I cut up my old harness and used the old plugs to hook up my windshield wiper motor to the battery to make sure it works, then I put the arms on. Now I'm working on getting the windshield washer pump working. Then I can put the cowl back on for the last time (hopefully). I don't want to have to go under that dash to change out the wiper motor or the washer pump later

[67C10Step]

Well, the alignment shop went great but the glass shop not so much. When my old windshield came out I got some rust repair to do before a new windshield can go in. Got the truck hauled home and started cutting the bad out on the lower driver's side over the weekend and cleaning up the pinch weld all the way around. Going to take advantage of the cooler weather and work on it in the evenings this week.

[FL71C10]

Originally Posted by 67C10Step

Well, the alignment shop went great but the glass shop not so much. When my old windshield came out I got some rust repair to do before a new windshield can go in. Got the truck hauled home and started cutting the bad out on the lower driver's side over the weekend and cleaning up the pinch weld all the way around. Going to take advantage of the cooler weather and work on it in the evenings this week.

I hate surprises like that. I had that happen with my back window. Argghh!

[Already Gone]

Started 3 years ago buying the a used uncut block and crank and now gettng close to finish. Today 2 coats primer, 2 coats Chevy orange and 2 coats clear.

[Grumpy old man]

Test fitting the Champion CC369 radiator .

[72c20customcamper]

Hopefully fixed the real slow leak in my ac . Last year I retrofitted it to r134 worked great but when I used it the other day it wasn’t as cold as it should have been . Did the uv and it lit up around the hose end Had to replace a clamp on the low side hose . Pulled a vacuum and it held so I juiced it up and it’s crispy cold

[Chevys4life]

Well.......I finally got some things done in the engine compartment. Replaced the heater core, changed out the alternator, power steering pump, water pump both wire harnessess, flushed out radiator, painted up some pieces.

[tutone]

Still touching up some little things. Filled the antenna hole, swapped rear tires with fronts. Long story, fronts were 75s backs 70s. A friend saw that and called me out on it. Logged my 150th mile since the build. I'm happy with it so far.

[LNP]

Hope you have many more happy miles with it. Lookin good

[Steeveedee]

Pulled the seat out. I have foam and the covers to redo the upholstery. I'd better start taking pictures. There are some wires in the corners that I'll need to remember later where they go, and the old memory ain't what it used to be.

[tdangle]

Got the strips painted for my wood bed today

[countr]

Installed my bumper. (finally)