OR Serpentine belt conversions - Page 12 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

jjzepplin · 02-04-2015, 11:58 AM

Quote:

Originally Posted by Lee H

45 degree with 360 degree swivel housing.

Thank You. One more question and I'll shut it down. I don't see where I can connect the second heater hose. One goes to the intake manifold but the water pump has no fitting. Should I connect it to the block somewhere? My other truck has a fitting on the radiator but this one does not.
Sorry for the hijack but I think this information will help anyone that buys this conversion.
By the way-I am very happy with this conversion. No more squeaky belts and has proven quite reliable so far.

Lee H · 02-04-2015, 12:11 PM

Quote:

Originally Posted by jjzepplin

Thank You. One more question and I'll shut it down. I don't see where I can connect the second heater hose. One goes to the intake manifold but the water pump has no fitting. Should I connect it to the block somewhere? My other truck has a fitting on the radiator but this one does not.

The water pump should have a plug in it near the top.

**tll74** · 02-05-2015, 11:51 PM

Quote:

Originally Posted by Skerbs1

Hello,
I am interested in a sbc kit.
What would shipping be for 53149

Thanks

I'm currently out of them. Hang tight as I get many of these.

Quote:

Originally Posted by sb69chevy

Pm sent

PM's returned and Thanks.

Quote:

Originally Posted by Krex

pm sent

Quote:

Originally Posted by jjzepplin

What water neck are you guys using to clear the alternator?

I supply the neck when possible from the 88-95 C/K V8 trucks.

Quote:

Originally Posted by t-n-t fields

Can I get a price for one for a BB without A/C

Sorry no BBC kits right now. There much harder to come by.

Quote:

Originally Posted by Lee H

The water pump should have a plug in it near the top.

Yup that's it. To get this pump use 95 C/K 350 as a application.

Thanks, Tom

Nitis · 02-27-2015, 08:39 AM

subscribed

Krex · 02-28-2015, 01:41 AM

I am interested pm me I do need this to work with a long water pump I think my 350 is from a 74 Chevy truck

jjzepplin · 02-28-2015, 08:46 AM

I finally got mine sorted out. 95 truck water pump works great and now the pulley is in the right spot too. Even built my own Sanden mount kit and it is mounted. Now I just need a reverse rotation fan. I cut the mount near the fuel pump that was for the air pump so I could fit an electric Carter pump right to the block in the original spot. Cam out pretty good I think.

engairuph · 02-28-2015, 09:25 PM

I'm interested in set up for a sbc 350. My engine is a 76 model and that includes all pulleys, power steering pump, alternator, a/c compressor and belt?

**tll74** · 02-28-2015, 10:24 PM

Quote:

Originally Posted by engairuph

I'm interested in set up for a sbc 350. My engine is a 76 model and that includes all pulleys, power steering pump, alternator, a/c compressor and belt?

Yes

**tll74** · 02-28-2015, 10:35 PM

I have 3 conversions up for grabs. I think this would take care of request through PM's and and the thread. Shipping about 75.00 depending on your location. Thanks, Tom

engairuph · 02-28-2015, 10:59 PM

total with shipping to 39503 busness

Krex · 02-28-2015, 11:01 PM

I will take one shipped to 75023 please let me know total and payment info

**tll74** · 03-01-2015, 02:21 AM

Quote:

Originally Posted by engairuph

total with shipping to 39503 busness

Ralph, 225.00 for the kit and 75.00 shipping.

Quote:

Originally Posted by Krex

I will take one shipped to 75023 please let me know total and payment info

PM sent.

Nitis · 03-01-2015, 03:16 AM

I just read through this whole post

Did you ever see or talk to your friend who put his on his 4x4?

I have a 72 was hoping to see some pictures

Also I Assume that most new crate engines from GM will have all needed accessory holes but some older stuff may be short a hole?

**tll74** · 03-02-2015, 01:14 AM

Quote:

Originally Posted by Nitis

I just read through this whole post

Did you ever see or talk to your friend who put his on his 4x4?

I have a 72 was hoping to see some pictures

Also I Assume that most new crate engines from GM will have all needed accessory holes but some older stuff may be short a hole?

The 250 and 290 HP crate engines have the old school common holes which does lack one hole for the serp system. I'm not sure about the crate engines with aluminum heads. My friend's 4x4 conversion worked out just fine. He did that for his boss and has switched jobs so pics isn't a option.
Thanks, Tom

jjzepplin · 03-02-2015, 05:44 AM

I've got this on my 70 4x4 but the engine is slid forward 2" and has electric fans. Shouldn't be much different for a 4x4. I could post pics if needed.
For the missing hole-I just mounted the bracket-marked the spot-drilled a shallow hole-tapped it-and loc-tite'd a stud in- and boom.

engairuph · 03-02-2015, 06:58 PM

I'll take it. PM information for payment time frame.

**tll74** · 03-05-2015, 01:47 AM

Quote:

Originally Posted by engairuph

I'll take it. PM information for payment time frame.

PM sent

engairuph · 03-14-2015, 08:14 PM

Quote:

Originally Posted by tll74

PM sent

Would you have tracking number for setup? Haven't received or heard anything?

engairuph · 03-16-2015, 06:23 PM

ttt

**tll74** · 03-17-2015, 01:08 PM

Quote:

Originally Posted by engairuph

Would you have tracking number for setup? Haven't received or heard anything?

Hey Ralph, Miss commununication on my end. PM sent.

Steve68 · 03-17-2015, 06:30 PM

Early Small Block Accessory Drive Package Specifications
Specifications Part Number 12490896
Package Part Number 12497698 = With Air Conditioning
Part Number 12497697 = Without Air Conditioning

http://www.chevrolet.com/content/dam...m-12497698.pdf

weav1 · 04-05-2015, 08:54 PM

I would like one of there set ups pm sent

Steve68 · 05-07-2015, 11:25 PM

Finished Serpentine Belt Conversion from Tll74

*gmachinz* · 05-08-2015, 12:17 AM

There are also 140A versions which I like to use. With this bracket, you can drop a large, 6" cased 140A alternator pretty easily.

**TBONE1964** · 05-08-2015, 12:20 AM

Quote:

Originally Posted by Steve68

Finished Serpentine Belt Conversion from Tll74

That is a nice looking engine there Steve. Welcome to the best 67-72 truck forum on the planet. Tom did a great job getting that set up for you.

I will be looking for you to be burning some rubber on Ivy

Take care,
T2 aka Thomas aka Tom

02-27-2015, 08:39 AM	#279
Nitis Registered User Join Date: Apr 2014 Location: NOR-CAL Posts: 1,134	Re: Serpentine belt conversions subscribed

02-28-2015, 01:41 AM	#280
Krex Registered User Join Date: Nov 2014 Location: Dallas Posts: 529	Re: Serpentine belt conversions I am interested pm me I do need this to work with a long water pump I think my 350 is from a 74 Chevy truck

02-28-2015, 08:46 AM	#281
jjzepplin Registered User Join Date: Feb 2012 Location: Ruskin Florida Posts: 4,566	Re: Serpentine belt conversions I finally got mine sorted out. 95 truck water pump works great and now the pulley is in the right spot too. Even built my own Sanden mount kit and it is mounted. Now I just need a reverse rotation fan. I cut the mount near the fuel pump that was for the air pump so I could fit an electric Carter pump right to the block in the original spot. Cam out pretty good I think. __________________ 70 swb 4x4 406sbc 700r4 203/205 d60/14blt locker yadda yadda http://67-72chevytrucks.com/vboard/s...88#post6935688 Yeller 72 Blazer 2wd conversion project "No Daggum Money" http://67-72chevytrucks.com/vboard/s...d.php?t=550804 LS1-T56 3.73 LSD super budget build Blanco-2014 Sierra SWB https://67-72chevytrucks.com/vboard/...d.php?t=810350

02-28-2015, 09:25 PM	#282
engairuph Registered User Join Date: Oct 2014 Location: D'Iberville, MS Posts: 449	Re: Serpentine belt conversions I'm interested in set up for a sbc 350. My engine is a 76 model and that includes all pulleys, power steering pump, alternator, a/c compressor and belt? __________________ Ralph L. Jasper 69 4x4 Suburban PTO winch(NAVY) 13 GMC Ext cab 12 Ford Fusion SE(wife) MAI Interior shop

02-28-2015, 10:35 PM	#284
tll74 "Junkyard Dog" Join Date: Jan 2008 Location: Springfield Oregon Posts: 2,527	Re: Serpentine belt conversions I have 3 conversions up for grabs. I think this would take care of request through PM's and and the thread. Shipping about 75.00 depending on your location. Thanks, Tom __________________ 72 C-10 Cheyenne Super LWB, Vortec 427,TH700, 3.73 posi, tach, tilt, AM-FM,Frame off in process. http://s289.photobucket.com/albums/l...t=7eae161e.pbw 88 Monte Carlo SS bought new only 10k miles. 73 Chevelle SS 454 had since high school. 74 Camaro Z28 350 AT numbers matching, Black on Black. 73 El Camino SS 350 4sp. 70 Chevelle SS 396 4sp, number matching with LS6 454 69 Chevy C30 Car Hauler 86 K20 383 4sp 4" lift frame off restoration. http://s289.photobucket.com/albums/l...t=1b1082d3.pbw

02-28-2015, 10:59 PM	#285
engairuph Registered User Join Date: Oct 2014 Location: D'Iberville, MS Posts: 449	Re: Serpentine belt conversions total with shipping to 39503 busness __________________ Ralph L. Jasper 69 4x4 Suburban PTO winch(NAVY) 13 GMC Ext cab 12 Ford Fusion SE(wife) MAI Interior shop

02-28-2015, 11:01 PM	#286
Krex Registered User Join Date: Nov 2014 Location: Dallas Posts: 529	Re: Serpentine belt conversions I will take one shipped to 75023 please let me know total and payment info

03-01-2015, 03:16 AM	#288
Nitis Registered User Join Date: Apr 2014 Location: NOR-CAL Posts: 1,134	Re: Serpentine belt conversions I just read through this whole post Did you ever see or talk to your friend who put his on his 4x4? I have a 72 was hoping to see some pictures Also I Assume that most new crate engines from GM will have all needed accessory holes but some older stuff may be short a hole?

03-02-2015, 05:44 AM	#290
jjzepplin Registered User Join Date: Feb 2012 Location: Ruskin Florida Posts: 4,566	Re: Serpentine belt conversions I've got this on my 70 4x4 but the engine is slid forward 2" and has electric fans. Shouldn't be much different for a 4x4. I could post pics if needed. For the missing hole-I just mounted the bracket-marked the spot-drilled a shallow hole-tapped it-and loc-tite'd a stud in- and boom. __________________ 70 swb 4x4 406sbc 700r4 203/205 d60/14blt locker yadda yadda http://67-72chevytrucks.com/vboard/s...88#post6935688 Yeller 72 Blazer 2wd conversion project "No Daggum Money" http://67-72chevytrucks.com/vboard/s...d.php?t=550804 LS1-T56 3.73 LSD super budget build Blanco-2014 Sierra SWB https://67-72chevytrucks.com/vboard/...d.php?t=810350

03-02-2015, 06:58 PM	#291
engairuph Registered User Join Date: Oct 2014 Location: D'Iberville, MS Posts: 449	Re: Serpentine belt conversions I'll take it. PM information for payment time frame. __________________ Ralph L. Jasper 69 4x4 Suburban PTO winch(NAVY) 13 GMC Ext cab 12 Ford Fusion SE(wife) MAI Interior shop

03-16-2015, 06:23 PM	#294
engairuph Registered User Join Date: Oct 2014 Location: D'Iberville, MS Posts: 449	Re: Serpentine belt conversions ttt __________________ Ralph L. Jasper 69 4x4 Suburban PTO winch(NAVY) 13 GMC Ext cab 12 Ford Fusion SE(wife) MAI Interior shop

03-17-2015, 06:30 PM	#296
Steve68 Registered User Join Date: Nov 2014 Location: J.C., OR Posts: 19	Re: Serpentine belt conversions Early Small Block Accessory Drive Package Specifications Specifications Part Number 12490896 Package Part Number 12497698 = With Air Conditioning Part Number 12497697 = Without Air Conditioning http://www.chevrolet.com/content/dam...m-12497698.pdf Last edited by 70LonghornCST; 05-12-2015 at 05:53 AM.

04-05-2015, 08:54 PM	#297
weav1 Registered User Join Date: Feb 2007 Location: plainfield indiana Posts: 283	Re: Serpentine belt conversions I would like one of there set ups pm sent

05-07-2015, 11:25 PM	#298
Steve68 Registered User Join Date: Nov 2014 Location: J.C., OR Posts: 19	Re: Serpentine belt conversions Finished Serpentine Belt Conversion from Tll74 Last edited by 70LonghornCST; 05-12-2015 at 05:55 AM. Reason: Removed pictures as per OP

05-08-2015, 12:17 AM	#299
gmachinz Account Suspended Join Date: Jun 2011 Location: Des Moines, IA. Posts: 4,143	Re: Serpentine belt conversions There are also 140A versions which I like to use. With this bracket, you can drop a large, 6" cased 140A alternator pretty easily. Attached Images



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.