86 chevy crew cab 12 valve swap

[84chevyguyid]

I been working on my project for a year, been collecting pieces for several years. Thought I would share what I have so far. I started out with an 86 chevy 2 wheel drive crew cab long box. It was a diesel but the engine and trans were gone when I bought it, which saved me some work disassembling it.
I got a bus with a p pumped 12 valve in it that provided me with a motor and lots of other little trinkets to use on the truck. I pulled the front clip and the bed then had to remove the 2 wheel drive front suspension and mount up front springs. I used 1/2 ton chevy rear springs on the front. On the back I got some 4x4 chevy spring brackets and remounted the stock rear springs. I picked up a pair of axles from a 1990 dodge one ton with the 3.54 gears and got them mounted to the chevy frame, then it was time for the first test fit. More to follow...