Boyd Welding-67-72 Rear Mount Aluminum Tank - Page 12 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**dean jendro** · 09-29-2010, 08:55 AM

Looks like mine is on the road too. Thanks, Dave.

67-C10 · 09-29-2010, 10:11 PM

Came home to a nice box from the big brown truck. couldn't wait to hang it in. Fits like a glove.

smokinstang70 · 09-30-2010, 06:59 AM

Got mine yesterday to... sweet surprise to come home to!!!

It will be a little while before I get mine mounted.... but having another part for the truck increases my motivation that much more.

Tank looks great... Thanks again Dave.

chapster · 10-03-2010, 12:02 AM

Hey Dave,

Do you have a tracking number for my parts?

Thanks,
Kevin

68GMCCustom · 10-03-2010, 01:25 PM

Got my tank and looks and fits in the frame great. I have a question though....I have a filler neck w/cap, a sending unit, and 3 empty fittings on this tank. If one of the top 2 empty fittings is for a "safety vent"....then I didn't recieve one? I've gone thru the box twice and only found paperwork and a sticker. I'm guessing the other fitting is for a return line if needed, and the last on the lower front side is for the fuel line....just don't know what this 3rd fitting is for unless I'm supposed to have a vent for it?

Quote:

Originally Posted by Daveboyd
GROUP BUY PRICING STARTING 9-7-10

NORMAL PRICE = 349 tank + 34.00 sender + 34.00 safety vent +39.00 shipping

GROUP BUY STANDARD TANK- 349 shipped SAVE OVER $100.00
Includes:
-Bed or side Filler
-0-90 ohm sender
-Safety Vent
-Baffles

is it supposed to be one of these?

6T9GMC · 10-04-2010, 01:22 PM

I missed it again! Any exceptions? Please!

**Daveboyd** · 10-04-2010, 07:02 PM

Quote:

Originally Posted by 68GMCCustom

Got my tank and looks and fits in the frame great. I have a question though....I have a filler neck w/cap, a sending unit, and 3 empty fittings on this tank. If one of the top 2 empty fittings is for a "safety vent"....then I didn't recieve one? I've gone thru the box twice and only found paperwork and a sticker. I'm guessing the other fitting is for a return line if needed, and the last on the lower front side is for the fuel line....just don't know what this 3rd fitting is for unless I'm supposed to have a vent for it?

is it supposed to be one of these?

Yes, that safety vent should have been threaded into the 1/2" npt fitting on the tank. Give me a call in the morning and we will get one right out to you.

68GMCCustom · 10-04-2010, 11:15 PM

will do. nothing threaded into mine....other then the sending unit being mounted in place and the filler tube and cap...nothing in the 3 fittings.

chapster · 10-05-2010, 09:57 PM

Hey Dave,

Please check PM

Thanks

SWB4x4 · 10-06-2010, 01:39 AM

Quote:

Originally Posted by SWB4x4

Order Number: 5KP02327980765225

Ordered

when do you think I can expect mine Dave?

**Daveboyd** · 10-06-2010, 11:20 AM

Quote:

Originally Posted by SWB4x4

when do you think I can expect mine Dave?

All Remaining Tanks are shipping today. If you have an E-mail addy on file You should receive a Tracking number via email this evening.

**Daveboyd** · 10-06-2010, 11:21 AM

Quote:

Originally Posted by 68GMCCustom

will do. nothing threaded into mine....other then the sending unit being mounted in place and the filler tube and cap...nothing in the 3 fittings.

Thanks for calling Your Safety vent will ship today.

68GMCCustom · 10-06-2010, 12:57 PM

Thanks Dave!

SWB4x4 · 10-06-2010, 02:12 PM

Quote:

Originally Posted by Daveboyd

All Remaining Tanks are shipping today. If you have an E-mail addy on file You should receive a Tracking number via email this evening.

sounds good..... Thanks for the update.

nimrod · 10-06-2010, 04:43 PM

Quote:

Originally Posted by Daveboyd

All Remaining Tanks are shipping today. If you have an E-mail addy on file You should receive a Tracking number via email this evening.

Sweet! I received my tracking number 20 minutes ago!

**dean jendro** · 10-06-2010, 09:42 PM

Dave,
I got mine today and it looks great!! Just a couple of questions from a guy who does not pretend to be either a plumber or an electrician and has never done anything to an EFI rig except drive it. Could you please identify all the various holes and connections on my EFI tank? Some of this is obvious but maybe not to all of us.
Secondly, it appears that everyone is mounting the tank under the frame rail. I set mine inside the frame so I wouldn't have to find my big clamps and it seems to fit fine just like that. Is it just so that it will be easier to remove later and drop down or does mounting it to the lower inside frame rail move it too close to the bed?
Thanks a lot for a great product and all your help.
Dean

swamp rat · 10-06-2010, 10:34 PM

Mine was delivered today while i'm at work, its now resting safely in the house per my other half.. She was happy to know it was carryable and not too heavy.

68C10HotRod · 10-07-2010, 08:07 AM

Quote:

Originally Posted by dean jendro

Dave,
I got mine today and it looks great!! Just a couple of questions from a guy who does not pretend to be either a plumber or an electrician and has never done anything to an EFI rig except drive it. Could you please identify all the various holes and connections on my EFI tank? Some of this is obvious but maybe not to all of us.
Secondly, it appears that everyone is mounting the tank under the frame rail. I set mine inside the frame so I wouldn't have to find my big clamps and it seems to fit fine just like that. Is it just so that it will be easier to remove later and drop down or does mounting it to the lower inside frame rail move it too close to the bed?
Thanks a lot for a great product and all your help.
Dean

Those are pretty good questions Dean. I haven't got mine mocked up yet but hoping to very soon & after looking at your pics, agree it would be great to have a few simple notations on them for hookup reference. I'm not sure what the low front edge hole by the track bar is for. I assumed the hole on top is the return line but .....

Any light you could shed would be greatly appreciated Dave. Thanks.

**Daveboyd** · 10-08-2010, 10:36 AM

Quote:

Originally Posted by dean jendro

Dave,
I got mine today and it looks great!! Just a couple of questions from a guy who does not pretend to be either a plumber or an electrician and has never done anything to an EFI rig except drive it. Could you please identify all the various holes and connections on my EFI tank? Some of this is obvious but maybe not to all of us.
Secondly, it appears that everyone is mounting the tank under the frame rail. I set mine inside the frame so I wouldn't have to find my big clamps and it seems to fit fine just like that. Is it just so that it will be easier to remove later and drop down or does mounting it to the lower inside frame rail move it too close to the bed?
Thanks a lot for a great product and all your help.
Dean

Dean,

Great questions. Mounting the tank inside the frame rails is ok too it will raise your tank about a 1/4" closer to the bed so just make sure you have the clearance. Structurally the tank will be fine.

From the fill cap counter clockwise you have
-Fill cap or ribbed 90 degree fill
- 1/2" NPT for your vent (safety vent included)
- 3/8" NPT return both EFI and Non EFI
- on the efi unit you have a 3/8 NPT for your fuel out
- Sending unit flange with sender installed
- 3/8 NPT on bottom front pass side for drain if you have an EFI Tank and IF your tank is non EFI then that fitting is your Fuel out to engine.

chevy71c10 · 10-09-2010, 08:15 AM

Thanks Dave, Received my tank yesterday in great condition, was packed with care. Can't wait to get it installed this weekend!!

Thanks Again,
Justin

**dean jendro** · 10-09-2010, 03:01 PM

Quote:

Originally Posted by Daveboyd

Dean,

Great questions. Mounting the tank inside the frame rails is ok too it will raise your tank about a 1/4" closer to the bed so just make sure you have the clearance. Structurally the tank will be fine.

From the fill cap counter clockwise you have
-Fill cap or ribbed 90 degree fill
- 1/2" NPT for your vent (safety vent included)
- 3/8" NPT return both EFI and Non EFI
- on the efi unit you have a 3/8 NPT for your fuel out
- Sending unit flange with sender installed
- 3/8 NPT on bottom front pass side for drain if you have an EFI Tank and IF your tank is non EFI then that fitting is your Fuel out to engine.

Dave,
I'll see how much clearance I have and possibly mount it inside the frame.
Are there any tricks to the electrical connections on the pump and sending unit or is that self explanitory? Thanks for the quick answer on the plumbing questions. I hope it helps someone elso too.
Dean

SWB4x4 · 10-14-2010, 12:03 AM

got mine today NICE piece! Thanks again Dave

**Daveboyd** · 10-14-2010, 09:55 AM

Quote:

Originally Posted by dean jendro

Dave,
I'll see how much clearance I have and possibly mount it inside the frame.
Are there any tricks to the electrical connections on the pump and sending unit or is that self explanitory? Thanks for the quick answer on the plumbing questions. I hope it helps someone elso too.
Dean

Dean,

nope no trick there should be scribes below the fittings marking positive and negative. you should sandwich an electrical connector in between the two nuts on the post don't loosen the lower nut only the top.

**Daveboyd** · 10-14-2010, 10:11 AM

Quote:

Originally Posted by SWB4x4

got mine today NICE piece! Thanks again Dave

68GMCCustom · 10-14-2010, 10:43 AM

does anyone have their bed fill tank installed yet? I'd like to see how the filler comes out/looks/fits.

09-29-2010, 08:55 AM	#276
dean jendro Old and crusty Join Date: Jan 2009 Location: Surprise, AZ Posts: 462	Re: Boyd Welding-67-72 Rear Mount Aluminum Tank Looks like mine is on the road too. Thanks, Dave.

09-29-2010, 10:11 PM	#277
67-C10 Registered User Join Date: Jul 2008 Location: Taunton, MA Posts: 224	Re: Boyd Welding-67-72 Rear Mount Aluminum Tank Came home to a nice box from the big brown truck. couldn't wait to hang it in. Fits like a glove. Attached Images __________________ 67 C10 2wd Stepside (to be fleetside), Factory AC truck, Big Back Window, just got a 6.0/6l90e to jam in it now..... Needed: paint and lots of it. and i'm sure lots more misc. parts. Project 67 short step Build Thread 01 Sierra Crew 6.0 2015 Ford F150 Work gave me truck i really wouldn't buy a ford.

09-30-2010, 06:59 AM	#278
smokinstang70 Registered User Join Date: Feb 2009 Location: Savannah GA Posts: 505	Re: Boyd Welding-67-72 Rear Mount Aluminum Tank Got mine yesterday to... sweet surprise to come home to!!! It will be a little while before I get mine mounted.... but having another part for the truck increases my motivation that much more. Tank looks great... Thanks again Dave.

10-03-2010, 12:02 AM	#279
chapster Registered User Join Date: Jul 2005 Location: .. Posts: 455	Re: Boyd Welding-67-72 Rear Mount Aluminum Tank Hey Dave, Do you have a tracking number for my parts? Thanks, Kevin __________________ 1967 GMC shorty Parts Pile: NoLimit, Accu Air, Kore 3, Matts Classic Bowtie, March Performance, Lokar, ScottsHot Rods, Vintage Air, American Auto Wire, Circle D, Accu Air, Borla, Budnik, Ididit, One Piece Windows, Doug Thorley, Pypes, AutoLoc, Porterbuilt, CPP, Dynamat, Dakota Digital, Fesler 1968 Chevy c10 shorty Stepper (Patina LS project) 1967 gmc custom Long Box (Farm Truck Project)

10-04-2010, 01:22 PM	#281
6T9GMC Registered User Join Date: May 2003 Location: MOORE, OK Posts: 146	Re: Boyd Welding-67-72 Rear Mount Aluminum Tank I missed it again! Any exceptions? Please!

10-04-2010, 11:15 PM	#283
68GMCCustom Truck and auto performance nut Join Date: Feb 2007 Location: McKinney,Texas Posts: 3,848	Re: Boyd Welding-67-72 Rear Mount Aluminum Tank will do. nothing threaded into mine....other then the sending unit being mounted in place and the filler tube and cap...nothing in the 3 fittings. __________________ Kurt - '68 GMC short step - NIB '09 LY6 6.0L crate motor w/mods, NIB '12 crate 4L85e w/billet 3k stall Circle D, 3.73 posi 12 bolt, DynaTech f-swap headers, 3/4 drop, handling mods, etc. - my toy '72 Chevy LWB C-10 Highlander - 350/350 ps/pb/tilt/ac - not original but close '06 Chevy TrailBlazerSS - LS2/4L70e - little black hot rod SUV - my DD '18 Kia Sorento - wife's econo-driver '95 Chevy S10 - reg cab shortbed, LS, 4.3, auto... my '68's powertrain and chassis build -links broken A surprise phase - carb to efi -links broken

10-05-2010, 09:57 PM	#284
chapster Registered User Join Date: Jul 2005 Location: .. Posts: 455	Re: Boyd Welding-67-72 Rear Mount Aluminum Tank Hey Dave, Please check PM Thanks __________________ 1967 GMC shorty Parts Pile: NoLimit, Accu Air, Kore 3, Matts Classic Bowtie, March Performance, Lokar, ScottsHot Rods, Vintage Air, American Auto Wire, Circle D, Accu Air, Borla, Budnik, Ididit, One Piece Windows, Doug Thorley, Pypes, AutoLoc, Porterbuilt, CPP, Dynamat, Dakota Digital, Fesler 1968 Chevy c10 shorty Stepper (Patina LS project) 1967 gmc custom Long Box (Farm Truck Project)

10-06-2010, 12:57 PM	#288
68GMCCustom Truck and auto performance nut Join Date: Feb 2007 Location: McKinney,Texas Posts: 3,848	Re: Boyd Welding-67-72 Rear Mount Aluminum Tank Thanks Dave! __________________ Kurt - '68 GMC short step - NIB '09 LY6 6.0L crate motor w/mods, NIB '12 crate 4L85e w/billet 3k stall Circle D, 3.73 posi 12 bolt, DynaTech f-swap headers, 3/4 drop, handling mods, etc. - my toy '72 Chevy LWB C-10 Highlander - 350/350 ps/pb/tilt/ac - not original but close '06 Chevy TrailBlazerSS - LS2/4L70e - little black hot rod SUV - my DD '18 Kia Sorento - wife's econo-driver '95 Chevy S10 - reg cab shortbed, LS, 4.3, auto... my '68's powertrain and chassis build -links broken A surprise phase - carb to efi -links broken

10-06-2010, 09:42 PM	#291
dean jendro Old and crusty Join Date: Jan 2009 Location: Surprise, AZ Posts: 462	Re: Boyd Welding-67-72 Rear Mount Aluminum Tank Dave, I got mine today and it looks great!! Just a couple of questions from a guy who does not pretend to be either a plumber or an electrician and has never done anything to an EFI rig except drive it. Could you please identify all the various holes and connections on my EFI tank? Some of this is obvious but maybe not to all of us. Secondly, it appears that everyone is mounting the tank under the frame rail. I set mine inside the frame so I wouldn't have to find my big clamps and it seems to fit fine just like that. Is it just so that it will be easier to remove later and drop down or does mounting it to the lower inside frame rail move it too close to the bed? Thanks a lot for a great product and all your help. Dean Attached Images

10-06-2010, 10:34 PM	#292
swamp rat Registered User Join Date: Oct 2007 Location: Spanaway Posts: 8,451	Re: Boyd Welding-67-72 Rear Mount Aluminum Tank Mine was delivered today while i'm at work, its now resting safely in the house per my other half.. She was happy to know it was carryable and not too heavy. __________________ Mike. Swamp Rat build thread : http://67-72chevytrucks.com/vboard/s...d.php?t=595019 72 3/4T 4X4 4" BDS Lift 33" BFG's

10-09-2010, 08:15 AM	#295
chevy71c10 Registered User Join Date: Oct 2009 Location: Panama City Beach, FL Posts: 228	Re: Boyd Welding-67-72 Rear Mount Aluminum Tank Thanks Dave, Received my tank yesterday in great condition, was packed with care. Can't wait to get it installed this weekend!! Thanks Again, Justin __________________ Justin 71' C10 SWB 00' Dakota R/T 05' Z-71 Silverado 16' Z-71 Silverado Build Thread: http://67-72chevytrucks.com/vboard/s...d.php?t=376904

10-14-2010, 12:03 AM	#297
SWB4x4 Registered User Join Date: Jan 2010 Location: Nor*Cal CALIFORNIA Posts: 157	Re: Boyd Welding-67-72 Rear Mount Aluminum Tank got mine today NICE piece! Thanks again Dave __________________ J.T. 1972 SWB 4X4 on 35"s with 6" lift all around 3/4 ton running gear with high steer and 4.88s 350/th350. SOON TO BE DONE:2" higher in front 37"s,LSX Swap,Hugger Orange & White Paint Scheme,Air Conditioning,Power Windows & Locks,Complete Gauge Kit,Tank Relocation,Double Din Nav with full Audio System. My Build Thread http://67-72chevytrucks.com/vboard/s...=1#post4169140

10-14-2010, 10:43 AM	#300
68GMCCustom Truck and auto performance nut Join Date: Feb 2007 Location: McKinney,Texas Posts: 3,848	Re: Boyd Welding-67-72 Rear Mount Aluminum Tank does anyone have their bed fill tank installed yet? I'd like to see how the filler comes out/looks/fits. __________________ Kurt - '68 GMC short step - NIB '09 LY6 6.0L crate motor w/mods, NIB '12 crate 4L85e w/billet 3k stall Circle D, 3.73 posi 12 bolt, DynaTech f-swap headers, 3/4 drop, handling mods, etc. - my toy '72 Chevy LWB C-10 Highlander - 350/350 ps/pb/tilt/ac - not original but close '06 Chevy TrailBlazerSS - LS2/4L70e - little black hot rod SUV - my DD '18 Kia Sorento - wife's econo-driver '95 Chevy S10 - reg cab shortbed, LS, 4.3, auto... my '68's powertrain and chassis build -links broken A surprise phase - carb to efi -links broken



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.