Building a Blazer - vtblazer's Way - Page 12 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

vtblazer · 11-28-2008, 03:50 PM

Quote:

Originally Posted by jaros44sr

That's about as taken apart as possible, all down hill from here...looks good tho. How does it fill in any pitted area

Pitted areas...what pitted areas?

This frame had been sand blasted to bare metal then it was mothballed in the basement, all it had on it was flash over rust, Scotch Brite took it right off and left a great base for the POR to adhere to.

msgross · 11-28-2008, 04:10 PM

I like shiny... although it show dirt to easily

that's looking good...

FRENCHBLUE72 · 11-28-2008, 04:16 PM

Make sure you guys top coat the por because it does not like uv light and turns a milky grey color.. Ask me how I know..

vtblazer · 11-28-2008, 04:36 PM

Quote:

Originally Posted by FRENCHBLUE72

Make sure you guys top coat the por because it does not like uv light and turns a milky grey color.. Ask me how I know..

Yeah, I've heard that but will it turn if it doesn't get direct sunlight?
Is the UV enough to mess it up even under the body?

Big J · 11-28-2008, 05:55 PM

Quote:

Originally Posted by vtblazer

Yeah, I've heard that but will it turn if it doesn't get direct sunlight?
Is the UV enough to mess it up even under the body?

Whatever area that will see sunlight will eventually deteriorate and flake off. Nasty stuff after all that cost and work. When I por15ed my frame I painted over the por with rustoleum gloss black, while the por was still wet/tacky. Just as solid and no worries about it going to crap. Still looks as good as the day I did it, well almost, gotta wash it

You can check out some pics in the first couple pages of my thread and skip to the last few to see its current condition.

glimmertwin01 · 11-28-2008, 06:24 PM

ya stained your NEW floor!!!

glimmertwin01 · 11-28-2008, 06:28 PM

never topcoated a frame and it doesnt flake off.... I doesnt see direct sun unless i was to roll it...and if that happened the thing would be junk anyhow..

I prefer the flatish surface anyhow.. the last one i did I shot the whole sucker with Cosmoline... its just like factory fresh with that nice sticky gooey film

**jaros44sr** · 11-28-2008, 11:27 PM

Quote:

Originally Posted by vtblazer

Yeah, I've heard that but will it turn if it doesn't get direct sunlight?
Is the UV enough to mess it up even under the body?

Well, that's good news, now you can topcoat it in a satin finish like ya wanted...signed Pinky

vtblazer · 11-29-2008, 08:12 AM

Quote:

Originally Posted by jaros44sr

Well, that's good news, now you can topcoat it in a satin finish like ya wanted...signed Pinky

What's one more step at this point, right?

It does give me an idea however...

vtblazer · 11-29-2008, 08:16 AM

Quote:

Originally Posted by glimmertwin01

ya stained your NEW floor!!!

Not so worried about it, it'll wear off.

Chevyman63 · 11-29-2008, 08:36 AM

You really like that silver color, don't ya?

I kinda liked it to but not enough to leave it that way. I ordered another quart of black top coat because I ran out.

msgross · 11-29-2008, 09:09 AM

I did silver too...what a coincidence

**jaros44sr** · 11-29-2008, 09:44 AM

Quote:

Originally Posted by vtblazer

What's one more step at this point, right?

It does give me an idea however...

Well, ya wanted grey and ya wanted satin, now ya can have both. Your a lucky man! Gee, I wonder how many more steps ya have

I am so envious of you four, mine is just plane ol' brushed on undercoat...someday, maybe...naah

vtblazer · 11-29-2008, 10:10 AM

Quote:

Originally Posted by Chevyman63

You really like that silver color, don't ya?

You get a chance to see more detail with it being a lighter color but maybe that's not a good thing...dunno.

Quote:

Originally Posted by msgross

I did silver too...what a coincidence

Was that your primer?
Did ya use the same system as chevyman63 did?

Or did you change your mind and decide ya liked it black better?

Quote:

Originally Posted by jaros44sr

Well, ya wanted grey and ya wanted satin, now ya can have both.

Exactly what I need right now, more decision making to be done.

msgross · 11-29-2008, 10:24 AM

That was the masterseries rust sealer primer, then I did the glossy topcoat... That primer is very very tough... www.nomorerust.com

mine's not UV stable either but for a frame they said it would be fine... I just try to avoid leaving it all day exposed...

vtblazer · 11-29-2008, 11:51 AM

...'scues the momemt of insanity here but when I was at the parts store looking for and checking out paint, I spied some chevy orange paint and bought a couple cans.

Whatcha think?

(flame suit on

)

**Palf70Step** · 11-29-2008, 01:32 PM

Think about what?

You know we gotta have pictures (we can't read ya know)

FRENCHBLUE72 · 11-29-2008, 01:37 PM

Imma thinkin orange frame....

Chevyman63 · 11-29-2008, 01:55 PM

Quote:

Originally Posted by vtblazer

...'scues the momemt of insanity here but when I was at the parts store looking for and checking out paint, I spied some chevy orange paint and bought a couple cans.

Whatcha think?

(flame suit on

)

WHAT!!! ARE YOU SERIOUS!?!?!

ORANGE FRAME!?!?!

That might be kinda cool? Why don't you paint it so we can see it and then make the call.

vtblazer · 11-29-2008, 02:05 PM

Quote:

Originally Posted by Chevyman63

That might be kinda cool? Why don't you paint it so we can see it and then make the call.

...since you asked.

Came up with a plan I think I'll like, gotta get a couple more cans of paint but you get the idea.

msgross · 11-29-2008, 02:16 PM

well, its orange...

FRENCHBLUE72 · 11-29-2008, 02:43 PM

YouTube - It's The Great Pumpkin, Charlie Brown...

hahahahahahahhahhahaha..

vtblazer · 11-29-2008, 03:10 PM

Quote:

Originally Posted by msgross

well, its orange...

If it turns out looking like sack, I'll just throw some more black on it and call it good to go but I'm willing to give it a shot to find out.

FRENCHBLUE72 · 11-29-2008, 03:52 PM

Kurt ya cant just throw the black on top of the orange cause when ever it chips itll be orange. I personally think it will look killer orange..

vtblazer · 11-29-2008, 04:28 PM

Quote:

Originally Posted by FRENCHBLUE72

Kurt ya cant just throw the black on top of the orange cause when ever it chips itll be orange. I personally think it will look killer orange..

I'm with ya Charlie Brown.

11-28-2008, 04:10 PM	#277
msgross Registered User Join Date: Jul 2006 Location: Central PA Posts: 12,201	Re: Building a Blazer - vtblazer's Way I like shiny... although it show dirt to easily that's looking good... Attached Images __________________ The Garage: 1968 K-10 SWB - "Project Money Pit" 1996 Z-71 - "huntin rig" 1969 C-10 LWB (SOLD) "Project flip that truck or else" 1993 Passport, F@rd 1-ton (SOLD)"Project Cousin Eddie" My Garage Build "The 1,000 footer"

11-28-2008, 04:16 PM	#278
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,608	Re: Building a Blazer - vtblazer's Way Make sure you guys top coat the por because it does not like uv light and turns a milky grey color.. Ask me how I know.. __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

11-28-2008, 06:24 PM	#281
glimmertwin01 Registered User Join Date: Mar 2008 Location: Rochester NY Posts: 1,022	Re: Building a Blazer - vtblazer's Way ya stained your NEW floor!!! __________________ 67/68 K/20 "The BEAST" 68 K15 V6 LWB. 73 K20 GMC Burb "The Bomber" 74 K/5 74 K20 Custom Deluxe 86 K10 Shorty 92 K2500 Burb 95 K2500 GMC Life is what you make it Live each day like it was your last Old GM Trucks never go out of style

11-28-2008, 06:28 PM	#282
glimmertwin01 Registered User Join Date: Mar 2008 Location: Rochester NY Posts: 1,022	Re: Building a Blazer - vtblazer's Way never topcoated a frame and it doesnt flake off.... I doesnt see direct sun unless i was to roll it...and if that happened the thing would be junk anyhow.. I prefer the flatish surface anyhow.. the last one i did I shot the whole sucker with Cosmoline... its just like factory fresh with that nice sticky gooey film __________________ 67/68 K/20 "The BEAST" 68 K15 V6 LWB. 73 K20 GMC Burb "The Bomber" 74 K/5 74 K20 Custom Deluxe 86 K10 Shorty 92 K2500 Burb 95 K2500 GMC Life is what you make it Live each day like it was your last Old GM Trucks never go out of style

11-29-2008, 08:36 AM	#286
Chevyman63 Can't wait to retire!! Join Date: Feb 2003 Location: Corunna, MI Posts: 1,575	Re: Building a Blazer - vtblazer's Way You really like that silver color, don't ya? I kinda liked it to but not enough to leave it that way. I ordered another quart of black top coat because I ran out. __________________ 2009 4x4 Chevy Crew Cab 6.0 1989 4x4 Siverado (270,000 miles) 1972 4x4 Blazer 2007 Chevy Cutaway 1 ton 1970 Corvette (sons project) RIP - CLR 10/11/09

11-29-2008, 09:09 AM	#287
msgross Registered User Join Date: Jul 2006 Location: Central PA Posts: 12,201	Re: Building a Blazer - vtblazer's Way I did silver too...what a coincidence Attached Images __________________ The Garage: 1968 K-10 SWB - "Project Money Pit" 1996 Z-71 - "huntin rig" 1969 C-10 LWB (SOLD) "Project flip that truck or else" 1993 Passport, F@rd 1-ton (SOLD)"Project Cousin Eddie" My Garage Build "The 1,000 footer"

11-29-2008, 10:24 AM	#290
msgross Registered User Join Date: Jul 2006 Location: Central PA Posts: 12,201	Re: Building a Blazer - vtblazer's Way That was the masterseries rust sealer primer, then I did the glossy topcoat... That primer is very very tough... www.nomorerust.com mine's not UV stable either but for a frame they said it would be fine... I just try to avoid leaving it all day exposed... __________________ The Garage: 1968 K-10 SWB - "Project Money Pit" 1996 Z-71 - "huntin rig" 1969 C-10 LWB (SOLD) "Project flip that truck or else" 1993 Passport, F@rd 1-ton (SOLD)"Project Cousin Eddie" My Garage Build "The 1,000 footer"

11-29-2008, 11:51 AM	#291
vtblazer Registered User Join Date: Oct 2003 Location: Central Vermont Posts: 8,538	Re: Building a Blazer - vtblazer's Way ...'scues the momemt of insanity here but when I was at the parts store looking for and checking out paint, I spied some chevy orange paint and bought a couple cans. Whatcha think? (flame suit on ) Last edited by vtblazer; 11-29-2008 at 01:01 PM.

11-29-2008, 01:32 PM	#292
Palf70Step State of Confusion! Join Date: Jul 2002 Location: Gulfport, MS USA Posts: 47,082	Re: Building a Blazer - vtblazer's Way Think about what? You know we gotta have pictures (we can't read ya know) __________________ Bill 1970 Chevy Custom/10 LWB Fleetside 2010 Toyota Tacoma PreRunner SR5 Double Cab - DD Member of Louisiana Classic Truck Club (LCTC) Bill's Gallery Life isn't tied with a bow, but it's still a gift. Live simply. Love generously. Care deeply. Speak kindly. Leave the rest to God! Last edited by Palf70Step; 11-29-2008 at 01:32 PM.

11-29-2008, 01:37 PM	#293
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,608	Re: Building a Blazer - vtblazer's Way Imma thinkin orange frame.... __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

11-29-2008, 02:16 PM	#296
msgross Registered User Join Date: Jul 2006 Location: Central PA Posts: 12,201	Re: Building a Blazer - vtblazer's Way well, its orange... __________________ The Garage: 1968 K-10 SWB - "Project Money Pit" 1996 Z-71 - "huntin rig" 1969 C-10 LWB (SOLD) "Project flip that truck or else" 1993 Passport, F@rd 1-ton (SOLD)"Project Cousin Eddie" My Garage Build "The 1,000 footer"

11-29-2008, 03:52 PM	#299
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,608	Re: Building a Blazer - vtblazer's Way Kurt ya cant just throw the black on top of the orange cause when ever it chips itll be orange. I personally think it will look killer orange.. __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.