DURG's Black 65 C10 - Page 12 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

DURG · 08-09-2013, 08:17 PM

Decided to just do a couple short 90 degree tips on the end of the exhaust dumps. Installed the Lokar shifter bracket and shifter. I am going to cut a new hole in the hump where the shifter is now which is behind the OG hole the standard 4 speed shifter came through. I will weld a flush patch there and use a Lokar billet round boot ring and black "leather" boot.

mooseknuckles · 08-09-2013, 08:52 PM

looks good....is that the tranny mount style shifter?....how long is the handle?

DURG · 08-09-2013, 08:55 PM

Quote:

Originally Posted by mooseknuckles

looks good....is that the tranny mount style shifter?....how long is the handle?

Yes. 16" I believe.

BigJoe29 · 08-12-2013, 09:31 AM

ok yeah i have to tag this thread, that truck is amazing

coulter · 08-12-2013, 10:38 AM

killer lookin work man!!!

DURG · 08-22-2013, 08:25 PM

I did a few more things on the truck and then took it apart in anticipation of final welding, grinding, and re-sandblast so I can get some paint on the frame and gear up for final assembly. These pictures may not be in perfect order and possibly some of the same stuff I have posted before but I took some over the past week and today so I will post them anyway. I have installed the bracket that holds the gas pedal studs, cut a rectangular hole for a larger Lokar boot and ring, and installed a couple braces back from the driveshaft loop/cross member back to a plate on the inner frame where the 4 link front mount attaches. This cross member and brace is removable even though it should never need to be. I put a couple more pictures of the discontinued Porterbuilt hood hinge relocation brackets I attached my front bracing to also. I took a picture of a deluxe wheel installed on the Ididit column and also a small gusset I welded in where I notched the cross member support where I relieved it for steering column clearance.

DURG · 08-22-2013, 08:27 PM

DURG · 08-22-2013, 08:32 PM

Motor is out and everything is off the frame in front too. I just need to take out the 4 bolts and the cab will be off and I can move the frame around in finish prepping for black paint.

northern 85 · 08-23-2013, 05:48 AM

Great.clean work!

DURG · 08-29-2013, 06:48 PM

This thing is officially blown apart for final welding, grinding, blasting, and paint on the frame and suspension. Greg at Extreme Powder Coating has offered me a killer deal on powder for the suspension stuff but I think the shipping kills the deal. def going black on the frame for sure. Probably charcoalish gray on suspension stuff.

likaroc13 · 08-29-2013, 07:16 PM

Cool! Look forward to seeing it reassembled & looking purdy

Posted via Mobile Device

timmytimm3 · 08-30-2013, 09:14 AM

Looks awesome! Are you still going to do more bracing in the middle of the frame or did you decide against it? I'm still trying to figure out what I'm going to do. We boxed the frame on my Father's 57 but that was all weld in stuff (fatman IFS, no limit 4 link). There are a lot of different opinions regarding boxing and/or bracing.

Thanks

DURG · 08-30-2013, 10:04 AM

Quote:

Originally Posted by timmytimm3

Looks awesome! Are you still going to do more bracing in the middle of the frame or did you decide against it? I'm still trying to figure out what I'm going to do. We boxed the frame on my Father's 57 but that was all weld in stuff (fatman IFS, no limit 4 link). There are a lot of different opinions regarding boxing and/or bracing.

Thanks

I decided this is the only bracing I am installing. I just wanted to tie in a little support where the 4 link brackets mount and figure the cab will tie in the middle good enough. I am running poly cab mount bushings. My bed also has multiple 2x3" rectangular tubing cross sills now instead of the channel type stock ones and angle iron bracing for the wood floor and everything is welded to the actual box sheet metal too. This will be bolted solid to the frame mounts with 1/2" bolts so that will stiffen it up some too.

coulter · 08-30-2013, 07:38 PM

killer work man!!! the extra bracing looks awesome

DURG · 08-31-2013, 11:22 AM

Frame welding and blasting done. Forward progress from here on out !

Spragg · 08-31-2013, 12:22 PM

Nice build. Look forward to seeing the end result.

DURG · 09-01-2013, 10:40 AM

Got some black on the frame this morning.

**lolife99** · 09-01-2013, 11:49 AM

POR-15 or paint?

likaroc13 · 09-01-2013, 12:32 PM

Quote:

Originally Posted by DURG

Got some black on the frame this morning.

Looks nice!

DURG · 09-01-2013, 12:35 PM

Quote:

Originally Posted by lolife99

POR-15 or paint?

It's gloss black paint. Tractor Supply has an equipment paint for tractors and stuff. I did use POR-15 on my Impala. Just figured this paint would be fine on the frame.
Posted via Mobile Device

northern 85 · 09-02-2013, 07:42 AM

All your pics are gone, that sucks!

DURG · 09-02-2013, 08:00 AM

Quote:

Originally Posted by northern 85

All your pics are gone, that sucks!

Yeah, I have so many pictures on here and Chevy Talk I exceeded my free bandwidth. I had to upgrade my Photobucket account. The pictures are back now.

DURG · 09-02-2013, 10:24 AM

Hung a few parts and painted upper a arms and mid cross member.

northern 85 · 09-03-2013, 04:27 AM

Wow that looks fantastic!

Low Elco · 09-03-2013, 03:31 PM

Glad to see it looks that BLOODY GORGEOUS! I have a gallon of it with hardener on the shelf, just a-waitin'!

08-09-2013, 08:17 PM	#276
DURG Registered User Join Date: May 2012 Location: Scarborough ME. Posts: 413	Re: DURG's Black 65 C10 Decided to just do a couple short 90 degree tips on the end of the exhaust dumps. Installed the Lokar shifter bracket and shifter. I am going to cut a new hole in the hump where the shifter is now which is behind the OG hole the standard 4 speed shifter came through. I will weld a flush patch there and use a Lokar billet round boot ring and black "leather" boot. __________________ 1962 Impala SS 383 stroker Tremec TKO 600 Black 1965 SWB BBW Fleetside Custom Cab PB Coilover setup Black 2003 100th Anniversary Road King Classic Silver Black

08-09-2013, 08:52 PM	#277
mooseknuckles Registered User Join Date: Sep 2009 Location: ottawa,canada Posts: 4,550	Re: DURG's Black 65 C10 looks good....is that the tranny mount style shifter?....how long is the handle? __________________ my build threads '86 C10 http://67-72chevytrucks.com/vboard/s...d.php?t=415628 '67 C10 http://67-72chevytrucks.com/vboard/s...d.php?t=635078 '63 GMC http://67-72chevytrucks.com/vboard/s...d.php?t=674682

08-12-2013, 09:31 AM	#279
BigJoe29 Registered User Join Date: Jun 2010 Location: San Diego, Ca Posts: 17	Re: DURG's Black 65 C10 ok yeah i have to tag this thread, that truck is amazing __________________ Aerodynamics are for people who can’t build engines. – Enzo Ferrari - 64 Chevy C10 SWB- 440 BBC, Pro touring build in progress SLOWLY - 73 Camaro LT RS- Pro touring build eventually - 71 Bronco- my dirt monkey and current focus The military doesn't pay nearly what it should

08-12-2013, 10:38 AM	#280
coulter Registered User Join Date: Feb 2011 Location: muskogee, ok Posts: 1,091	Re: DURG's Black 65 C10 killer lookin work man!!! __________________ bagged 66 longbed build http://67-72chevytrucks.com/vboard/s...d.php?t=449548 my favorite colors.. black, rust, and shiny!!!! instagram: @coulter918

08-22-2013, 08:25 PM	#281
DURG Registered User Join Date: May 2012 Location: Scarborough ME. Posts: 413	Re: DURG's Black 65 C10 I did a few more things on the truck and then took it apart in anticipation of final welding, grinding, and re-sandblast so I can get some paint on the frame and gear up for final assembly. These pictures may not be in perfect order and possibly some of the same stuff I have posted before but I took some over the past week and today so I will post them anyway. I have installed the bracket that holds the gas pedal studs, cut a rectangular hole for a larger Lokar boot and ring, and installed a couple braces back from the driveshaft loop/cross member back to a plate on the inner frame where the 4 link front mount attaches. This cross member and brace is removable even though it should never need to be. I put a couple more pictures of the discontinued Porterbuilt hood hinge relocation brackets I attached my front bracing to also. I took a picture of a deluxe wheel installed on the Ididit column and also a small gusset I welded in where I notched the cross member support where I relieved it for steering column clearance. __________________ 1962 Impala SS 383 stroker Tremec TKO 600 Black 1965 SWB BBW Fleetside Custom Cab PB Coilover setup Black 2003 100th Anniversary Road King Classic Silver Black

08-22-2013, 08:27 PM	#282
DURG Registered User Join Date: May 2012 Location: Scarborough ME. Posts: 413	Re: DURG's Black 65 C10 __________________ 1962 Impala SS 383 stroker Tremec TKO 600 Black 1965 SWB BBW Fleetside Custom Cab PB Coilover setup Black 2003 100th Anniversary Road King Classic Silver Black

08-22-2013, 08:32 PM	#283
DURG Registered User Join Date: May 2012 Location: Scarborough ME. Posts: 413	Re: DURG's Black 65 C10 Motor is out and everything is off the frame in front too. I just need to take out the 4 bolts and the cab will be off and I can move the frame around in finish prepping for black paint. __________________ 1962 Impala SS 383 stroker Tremec TKO 600 Black 1965 SWB BBW Fleetside Custom Cab PB Coilover setup Black 2003 100th Anniversary Road King Classic Silver Black

08-23-2013, 05:48 AM	#284
northern 85 Registered User Join Date: Mar 2005 Location: Fairfield Maine Posts: 1,759	Re: DURG's Black 65 C10 Great.clean work!

08-29-2013, 06:48 PM	#285
DURG Registered User Join Date: May 2012 Location: Scarborough ME. Posts: 413	Re: DURG's Black 65 C10 This thing is officially blown apart for final welding, grinding, blasting, and paint on the frame and suspension. Greg at Extreme Powder Coating has offered me a killer deal on powder for the suspension stuff but I think the shipping kills the deal. def going black on the frame for sure. Probably charcoalish gray on suspension stuff. __________________ 1962 Impala SS 383 stroker Tremec TKO 600 Black 1965 SWB BBW Fleetside Custom Cab PB Coilover setup Black 2003 100th Anniversary Road King Classic Silver Black

08-29-2013, 07:16 PM	#286
likaroc13 Rollin' Old Skool Join Date: Jun 2007 Location: Hattiesburg, MS Posts: 5,371	Re: DURG's Black 65 C10 Cool! Look forward to seeing it reassembled & looking purdy Posted via Mobile Device __________________ _____________________________________________ Phillip My Build threads: 1966 Chevy C-10 "Black Betty" shortbed, fleetside, BBW, 327 V8/ Powerglide (under construction) http://67-72chevytrucks.com/vboard/s...ighlight=betty 1997 Chevy Tahoe, 2dr/2wd, mild custom (Daily driver) http://67-72chevytrucks.com/vboard/s...d.php?t=601142 Pics: '66 C-10 https://flic.kr/s/aHsjHWD4h9 '97 Tahoe https://flic.kr/s/aHsjGZ7wKP '93 C-1500 https://flic.kr/s/aHskxdpdnQ '88 S-10 Blazer https://flic.kr/s/aHsjYGx4Md Previous Rides: 1993 Chevy S-10 ext. cab, 4.3L, 4/5 drop (Sold) 1993 Chevy C-1500 short/step Retro-Rod (Sold) 1988 S-10 Blazer 2dr/2wd mild custom (Sold)

08-30-2013, 09:14 AM	#287
timmytimm3 Registered User Join Date: Apr 2012 Location: CT Posts: 265	Re: DURG's Black 65 C10 Looks awesome! Are you still going to do more bracing in the middle of the frame or did you decide against it? I'm still trying to figure out what I'm going to do. We boxed the frame on my Father's 57 but that was all weld in stuff (fatman IFS, no limit 4 link). There are a lot of different opinions regarding boxing and/or bracing. Thanks __________________ http://67-72chevytrucks.com/vboard/s...d.php?t=742865 66 SWB, C4 Dropmember timmytimm3 on IG "If you don't have time to do it right the first time, when will you?" -Dad

08-30-2013, 07:38 PM	#289
coulter Registered User Join Date: Feb 2011 Location: muskogee, ok Posts: 1,091	Re: DURG's Black 65 C10 killer work man!!! the extra bracing looks awesome __________________ bagged 66 longbed build http://67-72chevytrucks.com/vboard/s...d.php?t=449548 my favorite colors.. black, rust, and shiny!!!! instagram: @coulter918

08-31-2013, 11:22 AM	#290
DURG Registered User Join Date: May 2012 Location: Scarborough ME. Posts: 413	Re: DURG's Black 65 C10 Frame welding and blasting done. Forward progress from here on out ! __________________ 1962 Impala SS 383 stroker Tremec TKO 600 Black 1965 SWB BBW Fleetside Custom Cab PB Coilover setup Black 2003 100th Anniversary Road King Classic Silver Black

08-31-2013, 12:22 PM	#291
Spragg Registered User Join Date: Jul 2008 Location: Alberta Posts: 44	Re: DURG's Black 65 C10 Nice build. Look forward to seeing the end result.

09-01-2013, 10:40 AM	#292
DURG Registered User Join Date: May 2012 Location: Scarborough ME. Posts: 413	Re: DURG's Black 65 C10 Got some black on the frame this morning. __________________ 1962 Impala SS 383 stroker Tremec TKO 600 Black 1965 SWB BBW Fleetside Custom Cab PB Coilover setup Black 2003 100th Anniversary Road King Classic Silver Black



Register or Log In To remove these advertisements.

09-01-2013, 11:49 AM	#293
lolife99 67-72 parts collector,… Join Date: Nov 2002 Location: Mid-MO Posts: 22,700	Re: DURG's Black 65 C10 POR-15 or paint? __________________ Keith Convert to disc brakes. http://67-72chevytrucks.com/vboard/s...d.php?t=444823

09-02-2013, 07:42 AM	#296
northern 85 Registered User Join Date: Mar 2005 Location: Fairfield Maine Posts: 1,759	Re: DURG's Black 65 C10 All your pics are gone, that sucks!

09-02-2013, 10:24 AM	#298
DURG Registered User Join Date: May 2012 Location: Scarborough ME. Posts: 413	Re: DURG's Black 65 C10 Hung a few parts and painted upper a arms and mid cross member. __________________ 1962 Impala SS 383 stroker Tremec TKO 600 Black 1965 SWB BBW Fleetside Custom Cab PB Coilover setup Black 2003 100th Anniversary Road King Classic Silver Black

09-03-2013, 04:27 AM	#299
northern 85 Registered User Join Date: Mar 2005 Location: Fairfield Maine Posts: 1,759	Re: DURG's Black 65 C10 Wow that looks fantastic!

09-03-2013, 03:31 PM	#300
Low Elco Registered User Join Date: Apr 2003 Location: Indep, MO Posts: 5,893	Re: DURG's Black 65 C10 Glad to see it looks that BLOODY GORGEOUS! I have a gallon of it with hardener on the shelf, just a-waitin'! __________________ Boppa's Old Yeller Truck Build, Old Yeller's New Heart! Project Buzz Bomb Flyin' Low!

Register or Log In To remove these advertisements.