second chance 67 chevy, project from hell - Page 12 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**superflysteiny** · 06-28-2010, 03:21 PM

You can say that again. I thought about bidding on it and buying it back but I thought it would be wrong. The truck was stuck at 10000 for about minute and 30 secs and I thought I would have to buy it back but then it started to go up. Really the time slot is what screwed me. It went from standing room only to 200 people in there, 5 cars before I went. It was a bad move on my part should have walked on friday after the blood bath I witnessed. It just seemed like everyone including the auctioners just wanted to go home. It cost me atleast 20-30 grand. Live and learn it was an expensive trip. All I can say is atleast I did not pay someone to build it or I would have really taken a bath.

tanman6983 · 06-28-2010, 03:25 PM

Quote:

Originally Posted by superflysteiny

You can say that again. I thought about bidding on it and buying it back but I thought it would be wrong. The truck was stuck at 10000 for about minute and 30 secs and I thought I would have to buy it back but then it started to go up. Really the time slot is what screwed me. It went from standing room only to 200 people in there, 5 cars before I went. It was a bad move on my part should have walked on friday after the blood bath I witnessed. It just seemed like everyone including the auctioners just wanted to go home. It cost me atleast 20-30 grand. Live and learn it was an expensive trip. All I can say is atleast I did not pay someone to build it or I would have really taken a bath.

all in the past now. what about your wifes build? where can i find the build thread and are you doing any kind of theme for it?

68GMCCustom · 07-27-2010, 11:00 PM

This truck is up for sale now in the latest Hemmings Motor News for $78k

texastrendz · 07-27-2010, 11:20 PM

is that a 8 ball mfg frame, if it is how is is? i am looking at getting one myself. are the welds nice and fit finish ok to motor and trans?

nvrsatisfied · 09-01-2010, 02:56 PM

here it is in action in case no one has seen....

YouTube- 1967 Chevy C-10 Custom Pick-up- Show...

YouTube- 1967 Chevy C-10 Custom Part II: Driving,...

YouTube- 1967 Chevy C-10 Custom @ Barrett Jackson...

just now stubling across this build by looking threw your build for your wife.....my opinion-- F barrett also-- not because of your case only, but because of a build threw another family member of mine did....he got nothing, receipts he had added up greater than the selling price.....

**superflysteiny** · 09-01-2010, 05:24 PM

glad it found a good home. Hope you enjoy it.

**superflysteiny** · 09-01-2010, 05:30 PM

what are you trying to get for it

**superflysteiny** · 09-01-2010, 06:48 PM

Found out what you are asking. Good luck with the sell. Going to be tough to get that kind of money for it.

**FRENCHBLUE72** · 09-01-2010, 07:46 PM

Id like to punch the guy on the video !!!!!!<<<< Hope I dont offend anyone with that comment but tough!!

*Dylan · 09-01-2010, 10:18 PM

Quote:

Originally Posted by FRENCHBLUE72

Id like to punch the guy on the video !!!!!!<<<< Hope I dont offend anyone with that comment but tough!!

I too felt a slight bit of animosity towards him with his descriptions in the first video (but hey, we all start somewhere). I believe he called the brackets braces among a few other things that stuck out to me. Kind of felt like he was reading from a paper as well, or at least using one for queues. But video aside and in all seriousness, that is one of the nicest custom trucks on here. Hope it ends its journey with a great owner.

PipsC10 · 09-02-2010, 12:05 AM

did you see that guy in the video turning around and almost curb it?...what a tool!

**superflysteiny** · 09-02-2010, 01:42 PM

Thats what happens when you dont have your blood and hard work in the project. But I have to say its not his fault he got a killer deal on the truck. I think it will be very difficult to get 80000 for the truck but if he does it was a great investment

mx574 · 11-22-2010, 04:18 PM

Quote:

Originally Posted by superflysteiny

Thats what happens when you dont have your blood and hard work in the project. But I have to say its not his fault he got a killer deal on the truck. I think it will be very difficult to get 80000 for the truck but if he does it was a great investment

you have a really great attitude. ou cant change the past just the future. good job on the truck and keep up the good work. i will be folowing 66 dibella from now on.

*BGRAFX* · 11-21-2010, 11:43 AM

I really like this truck, reread the street trucks issue numerous times, I never thought to look here for a build thread. You've got some nice trucks and bikes. Thanks for sharing all the pictures.
Posted via Mobile Device

**superflysteiny** · 11-23-2010, 12:11 AM

Quote:

Originally Posted by BGRAFX

I really like this truck, reread the street trucks issue numerous times, I never thought to look here for a build thread. You've got some nice trucks and bikes. Thanks for sharing all the pictures.
Posted via Mobile Device

Thanks no problem. I will keep the pics coming on my other build
Posted via Mobile Device

**superflysteiny** · 11-23-2010, 12:11 AM

Quote:

Originally Posted by BGRAFX

I really like this truck, reread the street trucks issue numerous times, I never thought to look here for a build thread. You've got some nice trucks and bikes. Thanks for sharing all the pictures.
Posted via Mobile Device

Thanks no problem. I will keep the pics coming on my other build
Posted via Mobile Device
Posted via Mobile Device

mcbassin · 11-22-2010, 05:32 PM

Wow, that's the first time I had seen the videos....all I can say is go figure. Not sure about the driver on the demo video, he did come within inches of that curb...I know those one off rims cost some serious bank too. Damn

jgh64pkup · 12-02-2010, 10:45 AM

once again badass build

**superflysteiny** · 12-02-2010, 12:47 PM

Quote:

Originally Posted by jgh64pkup

once again badass build

Thanks man glad you like it
Posted via Mobile Device

*BGRAFX* · 12-02-2010, 10:13 PM

Congrats You made it in Street Trucks Top 10 of 2010
Posted via Mobile Device

**superflysteiny** · 12-03-2010, 10:58 AM

Thank you I am really proud of everyone that help me on that truck.
Posted via Mobile Device

**FRENCHBLUE72** · 01-19-2011, 10:54 PM

Why cant this bad ass ride find a good home???? I love this truck id wager who ever won the bid did not see a truck but saw dollar signs...

**67cheby** · 01-20-2011, 10:44 AM

truck of the year??? HOLY SMOKES , you the KING

VA72C10 · 01-21-2011, 09:48 PM

A little more realistic this time....with buyer's premium....

Sale Price: *$55,000.00

Really stinks you didn't get this for it when you sold it originally...

es67chevy · 02-09-2011, 04:29 PM

Ha, I saw this truck at Barrett Jackson too. It had already sold and had a sticker on it saying it was destined for Arkansas via truck transport. Can't remember the little town it was going to, but maybe I'll see it again around here.

06-28-2010, 03:21 PM	#1
superflysteiny Senior Member Join Date: Nov 2008 Location: orangevale ca Posts: 4,630	Re: second chance 67 chevy, project from hell You can say that again. I thought about bidding on it and buying it back but I thought it would be wrong. The truck was stuck at 10000 for about minute and 30 secs and I thought I would have to buy it back but then it started to go up. Really the time slot is what screwed me. It went from standing room only to 200 people in there, 5 cars before I went. It was a bad move on my part should have walked on friday after the blood bath I witnessed. It just seemed like everyone including the auctioners just wanted to go home. It cost me atleast 20-30 grand. Live and learn it was an expensive trip. All I can say is atleast I did not pay someone to build it or I would have really taken a bath.

07-27-2010, 11:00 PM	#3
68GMCCustom Truck and auto performance nut Join Date: Feb 2007 Location: McKinney,Texas Posts: 3,848	Re: second chance 67 chevy, project from hell This truck is up for sale now in the latest Hemmings Motor News for $78k __________________ Kurt - '68 GMC short step - NIB '09 LY6 6.0L crate motor w/mods, NIB '12 crate 4L85e w/billet 3k stall Circle D, 3.73 posi 12 bolt, DynaTech f-swap headers, 3/4 drop, handling mods, etc. - my toy '72 Chevy LWB C-10 Highlander - 350/350 ps/pb/tilt/ac - not original but close '06 Chevy TrailBlazerSS - LS2/4L70e - little black hot rod SUV - my DD '18 Kia Sorento - wife's econo-driver '95 Chevy S10 - reg cab shortbed, LS, 4.3, auto... my '68's powertrain and chassis build -links broken A surprise phase - carb to efi -links broken

07-27-2010, 11:20 PM	#4
texastrendz Registered User Join Date: Jan 2008 Location: HOUSTON TX Posts: 1,161	Re: second chance 67 chevy, project from hell is that a 8 ball mfg frame, if it is how is is? i am looking at getting one myself. are the welds nice and fit finish ok to motor and trans?

09-01-2010, 05:24 PM	#6
superflysteiny Senior Member Join Date: Nov 2008 Location: orangevale ca Posts: 4,630	Re: second chance 67 chevy, project from hell glad it found a good home. Hope you enjoy it.

09-01-2010, 05:30 PM	#7
superflysteiny Senior Member Join Date: Nov 2008 Location: orangevale ca Posts: 4,630	Re: second chance 67 chevy, project from hell what are you trying to get for it

09-01-2010, 06:48 PM	#8
superflysteiny Senior Member Join Date: Nov 2008 Location: orangevale ca Posts: 4,630	Re: second chance 67 chevy, project from hell Found out what you are asking. Good luck with the sell. Going to be tough to get that kind of money for it.

09-01-2010, 07:46 PM	#9
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,594	Re: second chance 67 chevy, project from hell Id like to punch the guy on the video !!!!!!<<<< Hope I dont offend anyone with that comment but tough!! __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

09-02-2010, 12:05 AM	#11
PipsC10 Registered User Join Date: Jan 2008 Location: Oakdale, Ca Posts: 655	Re: second chance 67 chevy, project from hell did you see that guy in the video turning around and almost curb it?...what a tool! __________________ 1970 2wd short/fleet 350/350 Project "iced green dream" http://67-72chevytrucks.com/vboard/s...d.php?t=272702 2006 Toyota Tacoma double cab 4x4

09-02-2010, 01:42 PM	#12
superflysteiny Senior Member Join Date: Nov 2008 Location: orangevale ca Posts: 4,630	Re: second chance 67 chevy, project from hell Thats what happens when you dont have your blood and hard work in the project. But I have to say its not his fault he got a killer deal on the truck. I think it will be very difficult to get 80000 for the truck but if he does it was a great investment

11-21-2010, 11:43 AM	#14
BGRAFX Account Suspended Join Date: Jun 2009 Location: kansas city Ks Posts: 1,970	Re: second chance 67 chevy, project from hell I really like this truck, reread the street trucks issue numerous times, I never thought to look here for a build thread. You've got some nice trucks and bikes. Thanks for sharing all the pictures. Posted via Mobile Device

11-22-2010, 05:32 PM	#17
mcbassin Still Learning Join Date: Jul 2009 Location: Central Oklahoma Posts: 10,108	Re: second chance 67 chevy, project from hell Wow, that's the first time I had seen the videos....all I can say is go figure. Not sure about the driver on the demo video, he did come within inches of that curb...I know those one off rims cost some serious bank too. Damn __________________ Mike "69 Short Wide" My Project 86 Silverado Landen's Project Instagram: @mcbassin My Website C/10 Club Oklahoma Facebook Group

12-02-2010, 10:45 AM	#18
jgh64pkup Sunburst C10!!! Join Date: Jan 2009 Location: Texas Posts: 2,560	Re: second chance 67 chevy, project from hell once again badass build __________________ Gage 1967 C10 Shortbed Stepside

12-02-2010, 10:13 PM	#20
BGRAFX Account Suspended Join Date: Jun 2009 Location: kansas city Ks Posts: 1,970	Re: second chance 67 chevy, project from hell Congrats You made it in Street Trucks Top 10 of 2010 Posted via Mobile Device Attached Images

12-03-2010, 10:58 AM	#21
superflysteiny Senior Member Join Date: Nov 2008 Location: orangevale ca Posts: 4,630	Re: second chance 67 chevy, project from hell Thank you I am really proud of everyone that help me on that truck. Posted via Mobile Device __________________ Tootsie build T Shirts (Supporting Colon Cancer research) Tootsie- a truck for my mother Pops 72 Cheyenne Dropmember build 67 Second Chance project from hell

01-19-2011, 10:54 PM	#22
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,594	Re: second chance 67 chevy, project from hell Why cant this bad ass ride find a good home???? I love this truck id wager who ever won the bid did not see a truck but saw dollar signs... __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..



Register or Log In To remove these advertisements.

01-20-2011, 10:44 AM	#23
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: second chance 67 chevy, project from hell truck of the year??? HOLY SMOKES , you the KING __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

01-21-2011, 09:48 PM	#24
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,269	Re: second chance 67 chevy, project from hell A little more realistic this time....with buyer's premium.... Sale Price: $55,000.00 Really stinks you didn't get this for it when you sold it originally... __________________ Looking for a 67-72 swb or blazer project in or around VA. Last edited by VA72C10; 01-21-2011 at 09:52 PM.*

02-09-2011, 04:29 PM	#25
es67chevy Registered User Join Date: Aug 2007 Location: Bella Vista, AR Posts: 1,107	Re: second chance 67 chevy, project from hell Ha, I saw this truck at Barrett Jackson too. It had already sold and had a sticker on it saying it was destined for Arkansas via truck transport. Can't remember the little town it was going to, but maybe I'll see it again around here. __________________ Eric 1967 C10 SWB 383 Stroker/TH400 Brother's One Piece Power Windows Shaved Doors, Markers, and Bumpers 4/6 Early Classic Drop Rear Fuel Tank (49-52 Chevy Car Tank) Surf Blue Paint Bella Vista, AR (Arkansas for those that get the 'A' states mixed up) My Build Thread: http://67-72chevytrucks.com/vboard/s...d.php?t=330869

Register or Log In To remove these advertisements.