Post Pics of your Static Drops!!

[low6four]

Camaro sub frame front end (4 inch drop). CPP 5" drop coils for the rear.

[SnS C10]

Looks sweet low6four

[Texas1963]

CPP 3/5 with 1 coil cut up front. Adjustable track bar and rear shock relocation kit. After the 1 coil removal up front she was resting on rubber stops so out the stops came. She rides good and I might remove the front stop perch for some more travel.

[Texas1963]

Here's another shot.

[Johnboy63]

Originally Posted by srsummers

Does someone make a stock drop spindle for our trucks? I see several trucks on here that say they have 2.5" drop spindles and still have 6 lug wheels.

Yes, I have a 6 lug 2 1/2 drop spindle that I got from classic parts 1-800-741-1678, you can also get them from LMC, Brothers, classic auto parts
Posted via Mobile Device

[forestb]

Originally Posted by Johnboy63

Yes, I have a 6 lug 2 1/2 drop spindle that I got from classic parts 1-800-741-1678, you can also get them from LMC, Brothers, classic auto parts
Posted via Mobile Device

If by "stock drop spindle" you mean that will work with drum brakes the answer is no you will have to convert to disks if you want drop spindles otherwise Johnboy63 is correct.

[joedoh]

thats a looker for sure texas

[Texas1963]

Thanks, jondoh. I might get the 2" blocks for the rear to really bring her down.

[mooseknuckles]

my sons '63...we swapped control arms, spindles, and springs, (1 1/2 coils cut off) from my '86...removed 4 leafs from the rear springs...ordered a flip kit and c-notch, and hopefully get dropped spindles soon. currently it's dropped 2 inches in the front and probably the same in the back.

[Old-Soul]

I like that stance Moose. I'd like to get my 61 close to that.

[dwcardfan]

Still got a lot to do. It has 3-5 coil spring drop with 20's

[revjames]

Originally Posted by dwcardfan

Still got a lot to do. It has 3-5 coil spring drop with 20's

Did you have to cut any of you inner fender with that?

[dwcardfan]

Originally Posted by revjames

Did you have to cut any of you inner fender with that?

No. I have a lot of clearance.

[Palf70Step]

Don't think I ever added mine to the mix. My 64, dubbed the "Mule"

4.5/6 drop 245/60x15 & 275/60x15

[MisterC]

Stance, wheels and tires are perfect!! That's where I want mine to end up.

[rcnutt]

My 62 with a 71 front crossmember. 2.5 drop spindles and 3" springs in front. 5" springs in back and a half inch block to fine tune her stance. 205 70 15 front and 265 50 15 out back
[IMG][/IMG]

[Chance66C10]

My 66 with a 1-3" drop. F: 235x70x15 R: 255x70x15

[Hollow65]

ECE 4/6 drop
255/55/17 front
265/55/18 rear

[C/10 King]

Originally Posted by rcnutt

My 62 with a 71 front crossmember. 2.5 drop spindles and 3" springs in front. 5" springs in back and a half inch block to fine tune her stance. 205 70 15 front and 265 50 15 out back
[IMG][/IMG]

Nice truck!!!!....and the 55-56 caps are a nice touch, plus the stance is perfect also.

[Eric15chevys]

Originally Posted by rcnutt

My 62 with a 71 front crossmember. 2.5 drop spindles and 3" springs in front. 5" springs in back and a half inch block to fine tune her stance. 205 70 15 front and 265 50 15 out back
[IMG][/IMG]

That 62 is perfect!

[1FUN64]

64 built for autocross and daily goofing off. NoLimit Wide Ride up front with cab and front clip dropped an extra inch over frame. Rear frame rails kicked up 5" with custom mounted coil overs. Probably about 7" up front and 9-10" out back.
Love all these trucks, good job everyone!

[slowGN]

3.5/5 ece

[Conrad63]

Originally Posted by cogorman

I would like to see pics of everyone static drops no matter how radical or ghetto they are. I'm thinking about buying a 5/7 drop kit from a supplier, but wanted to see one on an actual bodystyle like ours first. All I get is pics of 67-72 trucks. Also, can you guys shoot me in good directions for kits. All I have found is one supplier for the 5/7" drop. Thanks.
It would be cool if you guys had before and after too.

mines a 4-6 drop, the previous owner just heated the springs
im on 26.5 tires on 16"rims

plan to do CPP Grand slam kit with 5/7
also have a set of 22' GM Transports to go on next few weeks , which I am really excited about. anyway, here is my ride so far, not quite done, but getting there. oh and its a 63, original short wide, not a cut long box

[Tortuga_64]

Budget drop: Cut 1 & 1/2 coils up front and put in jeep TJ coils in rear

[junk4cash]

Went with 3" cpp springs up front and 4" out back. Decided to cut one coil up front. Also removed bump stop perches but left steer stop. Rides decent and I like the look better. Sat too high up front initially.