The 60-66 "PAYING IT FORWARD" thread! - Page 12 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Johns66 · 06-01-2016, 02:25 PM

About $18 shipping to 60090 for the inner shaft and outer tube.

I also just noticed one of the tangs is broken off.

Let me know.

**chevy2tom** · 06-01-2016, 03:22 PM

So it has 2 tangs or only one?

Johns66 · 06-01-2016, 03:35 PM

2 tangs

**chevy2tom** · 06-01-2016, 03:59 PM

I'll take it, pm me your payment info. Thanks

Johns66 · 06-08-2016, 12:56 PM

Quote:

Originally Posted by chevy2tom

I'll take it, pm me your payment info. Thanks

Sent today check your messages for actual shipping.

jteck10 · 06-08-2016, 01:18 PM

- i have an under the hood latch for a 63-65 and the 4 bolts (no latch pin)

- a 62 hood with no latch (can put them together). lots of bondo work and holes up front

- 62 passenger side front fender with alot of bondo work

- and still have a 60-62 bumper (no bolts) with a little bend in it

jteck10 · 06-09-2016, 10:47 AM

Quote:

Originally Posted by jteck10

- i have an under the hood latch for a 63-65 and the 4 bolts (no latch pin)

- a 62 hood with no latch (can put them together). lots of bondo work and holes up front

- 62 passenger side front fender with alot of bondo work

- and still have a 60-62 bumper (no bolts) with a little bend in it

pics for the above :

61apachec10 · 06-10-2016, 11:01 AM

I'm am trying to sell this front end off of my 61 c10, but if someone here wants it and wants to come and get it I will give it to them. Its the torsion bar front end and is in good shape. I have the steering box for It as well. Located in 84526, Utah. Name: 61 pic 2 torsion bars.JPG
Views: 1576
Size: 40.8 KB

Name: 61 pic 2 torsion bars.JPG
Views: 1576
Size: 40.8 KB

1963chev · 06-11-2016, 05:33 PM

60 to 63 driver's door. In rough shape. Panel cut to prepare for new after market piece. Found another door in better shape. Free in Calgary, AB, Canada

Grizz1963 · 06-13-2016, 01:51 PM

Please note, this is in England, but I am posting it on here as well, in case a lurker or member sees it or needs it.

This unit is dusty, but good.

Slips into each other, and four screws to keep it all together.

Wall mounted display unit.

Collection only, in flat pack from Rochester, Kent.

Bottle of Pepsi there for size perspective.

Kettle is on.

If it does not find a home, it will drive a BBQ.

Advertised elsewhere as well.

First PM and collection gets it.

Grizz1963 · 06-13-2016, 03:23 PM

Shelving gone to Jeff from Sittingbourne.

STC.

1963chev · 06-18-2016, 03:04 PM

Quote:

Originally Posted by 1963chev

60 to 63 driver's door. In rough shape. Panel cut to prepare for new after market piece. Found another door in better shape. Free in Calgary, AB, Canada

Am I really gonna take this to the metal recycler?!

1963chev · 06-20-2016, 10:35 PM

Door found a good home thankfully. Kijijied it and a local guy loved the price! He making a crew cab.

Quote:

Originally Posted by 1963chev

60 to 63 driver's door. In rough shape. Panel cut to prepare for new after market piece. Found another door in better shape. Free in Calgary, AB, Canada

ACK · 06-22-2016, 12:06 PM

Here's a bit of chrome for ya'. It's off a 4.1L, comes with both the breather and PCV. The PCV works, but it's a tad bit on the loud side. Underside of the valve cover could use a little cleaning, otherwise it's in pretty good shape overall. It was replaced by an old school script cover. Pay for postage and it's all yours.

rickoner · 06-22-2016, 12:38 PM

Quote:

Originally Posted by ACK

Here's a bit of chrome for ya'. It's off a 4.1L, comes with both the breather and PCV. The PCV works, but it's a tad bit on the loud side. Underside of the valve cover could use a little cleaning, otherwise it's in pretty good shape overall. It was replaced by an old school script cover. Pay for postage and it's all yours.

I could use it. Let me know what you'd need for shipping to 15126. Thanks.

ACK · 06-22-2016, 11:06 PM

Quote:

Originally Posted by rickoner

I could use it. Let me know what you'd need for shipping to 15126. Thanks.

I'll PM you by this weekend.

**sofilofi** · 06-27-2016, 08:23 PM

I have a stock (20.5 gal I think) fuel tank if anybody needs one,pick up only.I'm in Whittier CA

ACK · 06-30-2016, 10:28 PM

Quote:

Originally Posted by ACK

I'll PM you by this weekend.

Chrome valve cover with breather and PCV have shipped.

gpv440 · 07-18-2016, 10:04 PM

1965 C10 front suspension complete with cross member and manual steering box. I also have complete rear suspension except rear end. If there is any interest I can take a few pics. The parts are located in Batavia IL Zip 60510 for pick up only.

Thanks
Greg

**chevy2tom** · 07-18-2016, 10:38 PM

Greg, is the front end stock (worn out) or rebuilt? Thanks

gpv440 · 07-19-2016, 11:03 PM

It's stock except for 3 inch lowering springs. It drove pretty good for a 65.

SaltH2OHokie · 08-05-2016, 07:44 AM

I have the in cab gas tank from my 66 on eastern shore of VA. Previous owner of truck pulled it because he said he didn't like listening to gas slosh around. That said, no idea of its working condition as it was empty and in the bed of the truck when I bought it.

Can't imagine it's worth shipping... But I'll be happy to try to meet someone within reason at a mutually agreeable time. My best friend lives outside of Greensboro, NC, so I'm occasionally traveling from here to there and could easily bring it along.

66trkbldr · 08-16-2016, 12:48 AM

Month later but is susp still avail for local pick up

drmatera · 08-21-2016, 10:16 PM

I removed the stock tank today. Looks to be in really good shape, if you need one give me a shout. I can ship if needed. North Ga. Area. Posted via Mobile Device
Posted via Mobile Device

**1957 Chief** · 09-27-2016, 06:02 PM

Edited by Forum Staff

06-01-2016, 02:25 PM	#276
Johns66 Registered User Join Date: Mar 2013 Location: Waco, Texas Posts: 411	Re: The 60-66 "PAYING IT FORWARD" thread! About $18 shipping to 60090 for the inner shaft and outer tube. I also just noticed one of the tangs is broken off. Let me know.

06-01-2016, 03:22 PM	#277
chevy2tom Senior Member Join Date: Aug 2009 Location: Wheeling, Illinois Posts: 703	Re: The 60-66 "PAYING IT FORWARD" thread! So it has 2 tangs or only one?

06-01-2016, 03:35 PM	#278
Johns66 Registered User Join Date: Mar 2013 Location: Waco, Texas Posts: 411	Re: The 60-66 "PAYING IT FORWARD" thread! 2 tangs

06-01-2016, 03:59 PM	#279
chevy2tom Senior Member Join Date: Aug 2009 Location: Wheeling, Illinois Posts: 703	Re: The 60-66 "PAYING IT FORWARD" thread! I'll take it, pm me your payment info. Thanks

06-08-2016, 01:18 PM	#281
jteck10 Registered User Join Date: Aug 2015 Location: Bay Area, CA Posts: 94	Re: The 60-66 "PAYING IT FORWARD" thread! - i have an under the hood latch for a 63-65 and the 4 bolts (no latch pin) - a 62 hood with no latch (can put them together). lots of bondo work and holes up front - 62 passenger side front fender with alot of bondo work - and still have a 60-62 bumper (no bolts) with a little bend in it __________________ 1962 GMC 2500 3/4 ton longbed stepside (currently w/flatbed), 4 on the floor, 305-V6-5.0L Last edited by jteck10; 06-08-2016 at 01:24 PM.

06-10-2016, 11:01 AM	#283
61apachec10 Registered User Join Date: Sep 2015 Location: Helper, Utah Posts: 13	Re: The 60-66 "PAYING IT FORWARD" thread! I'm am trying to sell this front end off of my 61 c10, but if someone here wants it and wants to come and get it I will give it to them. Its the torsion bar front end and is in good shape. I have the steering box for It as well. Located in 84526, Utah.

06-11-2016, 05:33 PM	#284
1963chev Registered User Join Date: Oct 2004 Location: Calgary, AB Posts: 80	Re: The 60-66 "PAYING IT FORWARD" thread! 60 to 63 driver's door. In rough shape. Panel cut to prepare for new after market piece. Found another door in better shape. Free in Calgary, AB, Canada Attached Images

06-13-2016, 01:51 PM	#285
Grizz1963 Registered User Join Date: Dec 2012 Location: Rochester, KENT Posts: 10,565	Re: The 60-66 "PAYING IT FORWARD" thread! Please note, this is in England, but I am posting it on here as well, in case a lurker or member sees it or needs it. This unit is dusty, but good. Slips into each other, and four screws to keep it all together. Wall mounted display unit. Collection only, in flat pack from Rochester, Kent. Bottle of Pepsi there for size perspective. Kettle is on. If it does not find a home, it will drive a BBQ. Advertised elsewhere as well. First PM and collection gets it. __________________ MY BUILD LINK: http://67-72chevytrucks.com/vboard/s...585901]Redneck Express - 1966 C10 Short Fleetside MY USA ROADTRIPS http://forum.retro-rides.org/thread/...2018-humdinger IF YOU CAN'T FIX IT WITH A HAMMER, YOU'VE GOT AN ELECTRICAL PROBLEM MATE.

06-13-2016, 03:23 PM	#286
Grizz1963 Registered User Join Date: Dec 2012 Location: Rochester, KENT Posts: 10,565	Re: The 60-66 "PAYING IT FORWARD" thread! Shelving gone to Jeff from Sittingbourne. STC. __________________ MY BUILD LINK: http://67-72chevytrucks.com/vboard/s...585901]Redneck Express - 1966 C10 Short Fleetside MY USA ROADTRIPS http://forum.retro-rides.org/thread/...2018-humdinger IF YOU CAN'T FIX IT WITH A HAMMER, YOU'VE GOT AN ELECTRICAL PROBLEM MATE.

06-22-2016, 12:06 PM	#289
ACK Registered User Join Date: Oct 2012 Location: Philly, PA Posts: 540	Re: The 60-66 "PAYING IT FORWARD" thread! Here's a bit of chrome for ya'. It's off a 4.1L, comes with both the breather and PCV. The PCV works, but it's a tad bit on the loud side. Underside of the valve cover could use a little cleaning, otherwise it's in pretty good shape overall. It was replaced by an old school script cover. Pay for postage and it's all yours. Attached Images __________________ My truck ain't dead, it just smells funny.

06-27-2016, 08:23 PM	#292
sofilofi Junior Member Join Date: Dec 2011 Location: Whittier CA Posts: 81	Re: The 60-66 "PAYING IT FORWARD" thread! I have a stock (20.5 gal I think) fuel tank if anybody needs one,pick up only.I'm in Whittier CA Attached Images

07-18-2016, 10:04 PM	#294
gpv440 Registered User Join Date: Jul 2016 Location: Batavia IL Posts: 8	Re: The 60-66 "PAYING IT FORWARD" thread! 1965 C10 front suspension complete with cross member and manual steering box. I also have complete rear suspension except rear end. If there is any interest I can take a few pics. The parts are located in Batavia IL Zip 60510 for pick up only. Thanks Greg

07-18-2016, 10:38 PM	#295
chevy2tom Senior Member Join Date: Aug 2009 Location: Wheeling, Illinois Posts: 703	Re: The 60-66 "PAYING IT FORWARD" thread! Greg, is the front end stock (worn out) or rebuilt? Thanks

07-19-2016, 11:03 PM	#296
gpv440 Registered User Join Date: Jul 2016 Location: Batavia IL Posts: 8	Re: The 60-66 "PAYING IT FORWARD" thread! It's stock except for 3 inch lowering springs. It drove pretty good for a 65.

08-05-2016, 07:44 AM	#297
SaltH2OHokie Registered User Join Date: Jul 2016 Location: Cape Charles VA Posts: 9	Re: The 60-66 "PAYING IT FORWARD" thread! I have the in cab gas tank from my 66 on eastern shore of VA. Previous owner of truck pulled it because he said he didn't like listening to gas slosh around. That said, no idea of its working condition as it was empty and in the bed of the truck when I bought it. Can't imagine it's worth shipping... But I'll be happy to try to meet someone within reason at a mutually agreeable time. My best friend lives outside of Greensboro, NC, so I'm occasionally traveling from here to there and could easily bring it along.



Register or Log In To remove these advertisements.

08-16-2016, 12:48 AM	#298
66trkbldr LIGHTMUP,BURNMDWN! Join Date: Sep 2007 Location: downers grove il Posts: 110	Re: The 60-66 "PAYING IT FORWARD" thread! Month later but is susp still avail for local pick up __________________ 64 LWB Chevy " EL DEVILLE" 61 Caddy ambulance 56 Coupe deville 64 Coupe deville 29 Ford roadster

08-21-2016, 10:16 PM	#299
drmatera Registered User Join Date: Aug 2016 Location: Nicholson, Ga Posts: 134	Re: The 60-66 "PAYING IT FORWARD" thread! I removed the stock tank today. Looks to be in really good shape, if you need one give me a shout. I can ship if needed. North Ga. Area. Posted via Mobile Device Posted via Mobile Device Attached Images __________________ 1981 K10 (4.8 / 4L60E swap) 1982 C10 (5.3 / 4L80E swap) 1985 C20 Suburban (454 / 4L80E)

09-27-2016, 06:02 PM	#300
1957 Chief Senior Member Join Date: Jun 2016 Location: Beebe, AR Posts: 462	Re: The 60-66 "PAYING IT FORWARD" thread! Edited by Forum Staff Last edited by 63 & 64 Bowties; 09-27-2016 at 09:29 PM.

Register or Log In To remove these advertisements.