post latest 1/4 and 1/8 mile times and 60ft.

[smallblockchev]

Don't laugh at my sad times but it was with an open rear end my first night testing with new motor. 15.02 at 98.8 mph in the 1/4. Tried as hard as I could but it was all smoke until about the 330ft line

[flips72]

my new best, left side

[GMR-PERFORMANCE]

Looks like a great run.. MPH is lower than most for that ET.. I ran a 7.3 at 98... WHat gear do you have?

[flips72]

thanks, i'm running a 4.10

[flamingbig10]

125 shot off the line

[flips72]

[QUOTE=flamingbig10;6806926]
125 shot off the line[/QUOTE are you still running a truck 12 bolt?

[flamingbig10]

Yes with 373 and a girdle cover

[flips72]

finally broke into the 6,s last night, cant understand why my mph isn't picking up though, any ideas? my time is the one on the left. best 60 foot ever

[Scoop1]

Here's my best all around so far. Something still not just right.

.883 RT (took a little nap)
1.908 60ft.
8.047 594ft.
8.602 1/8th
80.94 mph

69 swb
454 + .30
ZZ502 roller cam, roller rockers etc. mallory distr. 3.73 eaton posi 12 bolt. 295/65 15 MT drag radials.
TH 350 w/ 2200-2500 stall (I suspect this may be alittle tight should be higher)

[flamingbig10]

125 shot sprayed at the 60 ft it was about a 100 out during the day

[flips72]

flamingbig10, are you on slicks or drag radials?

[flamingbig10]

e/t street drag radials 295/55/15

[flips72]

wish i could get a tire with that big of a foot print under mine, on a good day (not a 100 degrees) do you hook good, if you do what air pressure are you running and what kind of a burnout do you do? hope I'm asking to many questions, just trying to get these radial figured out.

[Super73]

Flip,

What radial do you have?
What size wheel?
What pressure you running?
What about shocks and springs?

[flips72]

Originally Posted by Super73

Flip,

What radial do you have?
What size wheel?
What pressure you running?
What about shocks and springs?

275/60/15 m/t pro radial, 8 inch wheel, seems to hook the best at 16 psi, shocks are just Monroe gas , and springs are 4 inch lowering springs from ccp on the rear, and Monroe gas with drop spindles and 1 inch lowering springs in the front, basically stock suspension. not relly a drag truck but we do take it to a lot of test and tune nights mostly street driven.

[flamingbig10]

It hook decent on a prepped track I dead hooked on a 125 shot, 18 psi, a small burn out seams like it works

[69restomod]

Just ran this past thursday to get a baseline with my new gears and before i put on my new cnc ported afr 210s and port matched super victor
r/t .122
60' 1.79
330' 5.172
1/8 8.02
mph 85.62
1000 10.51
1/4 12.642
mph 105.85

[radar1]

I've got some more tuning to do, but this was the first time out to test and tune. 30 over 454, Comp cams extreme energy xe-268, Performer intake, Q-Jet, Headman full length headers, 700r4, Cal-Tracs, 3.42 10 bolt, with a gov-loc, running on Cooper street tires 275/60-15's. Car number 51, all three right columns, ignore the first column its the other guys.

[Wasted Income]

Cluncker 1/4 mile - YouTube

10 psi, 4500 lb race weight, E85

[383 Stroker]

Ran a 6.86@103mph last time at the track...

[dinnut]

150 shot nitrous outlet stinger on a digiset. New cam and converter for this year. Progressive and electric water pump next

[68 C-10 KID]

Posted via Mobile Device
New fastest ET this Saturday
60'-1.565
1/8-7.182
1/4-11.383
MPH-115.47

[70gmc longbed]

70 gmc longbed weighs 4300 with me in it
357 aluminum heads
1.9 60ft
8.7 1/8th
80mph
Posted via Mobile Device

[409malibu]

just started building my 86 chevy sb. have been racing a 65 elcamino for a couple years now.
.040 sb 400
comp 660 solid roller
callies crank
6 in rods
mahle forged flat tops
brodix cnc track1 heads
brodix hv1000 intake
1050 dominator on 110
9 inch spool with 488's
29.5 9 inch mickey slick
built 350 turbo manual valve body 5500 convertor
car was going 10.20 but didn't handle very good

gonna transfer this set up into my truck over this winter on caltracs

[lower50's]

Originally Posted by 409malibu

just started building my 86 chevy sb. have been racing a 65 elcamino for a couple years now.
.040 sb 400
comp 660 solid roller
callies crank
6 in rods
mahle forged flat tops
brodix cnc track1 heads
brodix hv1000 intake
1050 dominator on 110
9 inch spool with 488's
29.5 9 inch mickey slick
built 350 turbo manual valve body 5500 convertor
car was going 10.20 but didn't handle very good

gonna transfer this set up into my truck over this winter on caltracs

That should be fun.