1967 C10 Urban Retro

[Orangetonicclicc]

Converted my original axel to 5 lug. Had to machine it for my rotors to fit as well turned out great! If I new the guy Tommy Lee had do it, I'd give him a shout out!

[sduckworth13]

Cool deal, glad to see the CPP modular spindle actually does for a fact bring in the wheel base.

[Orangetonicclicc]

Originally Posted by sduckworth13

Cool deal, glad to see the CPP modular spindle actually does for a fact bring in the wheel base.

Yes Scott, I was concerned! But it in fact did every thing Tommy Lee said it would do. I bit the bullet on that one. If you know of anyone looking for a brandnew pair of 2.5 drop spindles I have a pair I will let go for the low low!!! I could use the extra cash to finish up this thing!

[sduckworth13]

I would like to have them actually, but have too many other must haves first. I think that I'll be using the CPP modular spindle when I lower my truck next year. What's nice about the modular spindle is that you can run the CPP Big Brake kit without cutting on them vs the standard drop spindles you'd have to cut the ears for the caliper off because the big brakes use their own separate bracket the caliper bolts too.

[Orangetonicclicc]

Originally Posted by sduckworth13

I would like to have them actually, but have too many other must haves first. I think that I'll be using the CPP modular spindle when I lower my truck next year. What's nice about the modular spindle is that you can run the CPP Big Brake kit without cutting on them vs the standard drop spindles you'd have to cut the ears for the caliper off because the big brakes use their own separate bracket the caliper bolts too.

Exactly one day! I will get bigger brakes and calipers! It's a pretty nice set up! If I still have them, I'd be happy to get them to you!

[WiggyHD]

Originally Posted by Orangetonicclicc

If you know of anyone looking for a brandnew pair of 2.5 drop spindles I have a pair I will let go for the low low!!!

I'm looking! Any rotors/calipers to go with them?

Mark

[sduckworth13]

Originally Posted by Orangetonicclicc

Exactly one day! I will get bigger brakes and calipers! It's a pretty nice set up! If I still have them, I'd be happy to get them to you!

I appreciate that, but it looks like Mark is ready to buy today. The drop spindles don't last long on here beats posting on Craigslist anyday.

[Orangetonicclicc]

Originally Posted by WiggyHD

I'm looking! Any rotors/calipers to go with them?

Mark

Mark I will PM you in a few!

[Orangetonicclicc]

Well Shoot Fire!!! Excuse my language! Brothers Truck shipped my truck parts to my old address from 6 years ago! If you look at my first page with my C-10 you can see the same house! Fortunately the house was vacant and my parts were sitting on the porch for like 2 days!

[WiggyHD]

Originally Posted by Orangetonicclicc

Mark I will PM you in a few!

Thanks!

[Orangetonicclicc]

Unfortunately my dash pad was in back order and currently in transit to this address, So I was it for it! And the next thing is my carpet was shipped from another vendor and not arriving today! And they can't get the tracking number til tomorrow! The great thing is! This is a great neighborhood and the remembered us and said they would look for the carpet and call me!

[Orangetonicclicc]

going thru the parts... Many things will have to be returned

[Orangetonicclicc]

I purchased the Heavy Duty Radiator Pads and Retainers with the Radiator cover. For some reason the Heavy Duty hardware is sitting to high and won't allow me to shut my hood...guess I have to go with the standard hardware.

[Orangetonicclicc]

Laid out my carpet so it can naturally go back in to form for 24 hours. My Sill Plates were suppose to have the Bowties on it, so they are getting shipped back for the right ones!

[Orangetonicclicc]

Stock Dash pad is going to set my seats off!

[Orangetonicclicc]

black Back cab carpet and floor carpet really looks terriffic!

[Orangetonicclicc]

Got my 700R4 today too! Now that I have it time to install and get my drive shaft length and get it cut!

[Orangetonicclicc]

another look at my Tranny! Rebuilt $675.00 with Torque Converter,Cooler, Dip Stick, and TV Cable. Was told to be sure to get an authentic GM TV Cable! So I will be switching that out! Also have a sweet chrome tranny pan, but will change after installed!

[WiggyHD]

Originally Posted by Orangetonicclicc

Attachment 1315675 black Back cab carpet and floor carpet really looks terriffic!

Did the rear cab carpet come from trim parts also?

Mark

[WiggyHD]

Originally Posted by Orangetonicclicc

Attachment 1315678 another look at my Tranny! Rebuilt $675.00 with Torque Converter,Cooler, Dip Stick, and TV Cable.

O.K., another question, where did you get the transmission for that price? Someone local to you?

And, what color is that? From some of the angles it looks black, but in the pics of the inside, the paint looks like a gunmetal gray metallic?

Mark

[Orangetonicclicc]

Originally Posted by WiggyHD

O.K., another question, where did you get the transmission for that price? Someone local to you?

And, what color is that? From some of the angles it looks black, but in the pics of the inside, the paint looks like a gunmetal gray metallic?

Mark

His name is Justin Harris from Martix Transmission and Drive Trains out of Oklahoma. It a gunmetal gray. Yes local.

[Orangetonicclicc]

Used the remaining amount of my 58sq ft bundle of Hushmat for my doors full coverage! Outside and Inside! Great difference with 58 sq. ft you can totally cover your cab! Minus my ceiling! Because I'm not covering it I was generous in places like my door, firewall, and can!

[Orangetonicclicc]

Found all my holes for my seat frame! Decided to give my carpet one more day to go back to it's natural form. I will glue it down tomorrow!

[Orangetonicclicc]

Brand New Vent Windows! Sealed with epoxy and replaced the factory tint windows with smoke tint! Keeping the nostalgic 67 look in tact!

[67c10rustbuket]

Nice build okie ! You and your son will have a very nice truck when complete. �� keep up the good work!