The 60-66 "PAYING IT FORWARD" thread! - Page 12 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Kenfuzed · 02-14-2017, 12:45 PM

Just the axles and drums following my 6 to 5 swap.

These are spoken for, glad someone could get some use out of them.

ChevyApache61 · 02-26-2017, 12:07 AM

Ok guys I'm getting ready to do a front end swap for disc brakes on my 61.. so I will a front end up for grabs it has the torsion bars but is missing the steering linkage as previous owner took gearbox and everything out to install a ford rack n pinion, I also have that as well if anyone wants

Jbshawstad · 03-26-2017, 03:25 PM

I have complete 1965 c10 short wheelbase frame. About to do frame swap, this one needs a home.

aggie91 · 03-29-2017, 09:53 AM

Quote:

Originally Posted by Jbshawstad

I have complete 1965 c10 short wheelbase frame. About to do frame swap, this one needs a home.

Do you still have it? Sent you a PM too. I need to do some work on mine to make it right. It be easier to just do the swap if yours is in good shape.

53lowdown · 03-30-2017, 12:44 PM

Rear end is gone

373 eaton rear end out of a 62 c10. It was usable but wanted a higher gear for highway so I swapped it out. Probable needs seals and possibly a pinion bearing. Complete with as pictured - Axles were redrilled to 5x4.75 bolt pattern.

aggie91 · 04-03-2017, 09:48 AM

Quote:

Originally Posted by Jbshawstad

I have complete 1965 c10 short wheelbase frame. About to do frame swap, this one needs a home.

Quote:

Originally Posted by aggie91

Do you still have it? Sent you a PM too. I need to do some work on mine to make it right. It be easier to just do the swap if yours is in good shape.

Jbshawstad - Hoping you use this...I will send another PM today too. I am really interested to talking to you about this frame...

**jayoldschool** · 03-26-2017, 05:07 PM

Wow, this thread still delivers. Nice offer.

**chevy2tom** · 03-28-2017, 09:06 PM

Yep, funny **** right there

63C20 · 03-30-2017, 12:52 PM

I have a great condition ash tray for a 62

available for pickup in olympia washington

Isaiah92260 · 04-03-2017, 12:51 PM

Quote:

Originally Posted by 63C20

I have a great condition ash tray for a 62

available for pickup in olympia washington

Is the ash tray still available? I'd like to see it & I'll pay for shipping!

oem4me · 04-09-2017, 11:32 AM

Center license plate thingy for a fleetside sport bumper. A tad rough, but still holds a license plate just fine. The original light was cut out at some point, but the working replacement covers the hole.
Pay the minimal shipping and it's yours.

60chevyjim · 04-28-2017, 10:41 PM

Quote:

Originally Posted by oem4me

Center license plate thingy for a fleetside sport bumper. A tad rough, but still holds a license plate just fine. The original light was cut out at some point, but the working replacement covers the hole.
Pay the minimal shipping and it's yours.

hi I am interested in it my zip code is 27886
thanks jim

oem4me · 04-30-2017, 01:40 PM

Quote:

Originally Posted by 60chevyjim

hi I am interested in it my zip code is 27886
thanks jim

I'll get a quote for you tomorrow. Guessing $10 or less.

oem4me · 05-02-2017, 12:14 AM

Quote:

Originally Posted by 60chevyjim

hi I am interested in it my zip code is 27886
thanks jim

PM sent.

J Williams · 01-13-2020, 10:58 PM

Quote:

Originally Posted by 63C20

I have a great condition ash tray for a 62

available for pickup in olympia washington

Do you happen to still have the ash tray?

61Chevy454 · 04-10-2017, 03:01 PM

Can't wait till I get my truck back so I can give some stuff away!

Raked 64 · 04-21-2017, 10:38 AM

I have a reproduction black radiator fan shroud for a 64-66 that is new. I am near Springfield Il. Don't want to ship it as it is bulky and will be a pain.
If someone can use it and is going to be in the area, PM me and I will hook you up.

**sirJim** · 04-29-2017, 02:35 AM

This is NOT a WTB post. If someone posts up something they are giving away, you can ask for it but you cannot request items.

Thanks for your understanding.

spookylynx · 05-03-2017, 12:38 PM

My project is done and I have some stuff to give away.

I have...

A full 1965 cab:
low hump ,small back window, has typical rot in floor and corners but is not beyond repair. Dash, roof, A & B pillars & back panel all good.

A 1965 hood:
has damage to passenger front, but not beyond total repair, no rust.

1965 Gauge cluster:
everything works, I swapped in all AutoMeter stuff.

1965 inline 6:
Ran when pulled 3years ago, complete.

Everything is for free (or some beer donations). BUT!!! I'm not able to ship anything so you have to come get it.

Everything will be available until about June 3rd, then it is going to the recycler.

TXT me is best: 9-seven-0 - three - nine -0 - two - nine -two- zero

-Josh

Jimal · 05-29-2017, 11:43 AM

I love the spirit of this thread. I sold my '65 K10 back in January, but I still have some random parts lying around that I'm not going to use, but are too nice to toss.

Scuttle from a '63 pickup. Other than the red oxide primer, it appears to be in good shape. I didn't see any obvious pitting.

Set of LMC Truck bumper brackets for the rear of a short step. I ordered them just before buying a parts stash that had OEM bumpers and brackets that I ended up using. I never got around to returning them.

Misc. OEM bumper brackets and fender braces. No idea whether they are for our trucks or not, but they came with mine and besides, free parts fit better.

Local pick up from 06776 would be preferred, but I'll listen to offers for shipping if you pay.

DM me here or email me at jaltemus@snet.net

Jimal · 06-19-2017, 01:44 PM

Quote:

Originally Posted by Jimal

I love the spirit of this thread. I sold my '65 K10 back in January, but I still have some random parts lying around that I'm not going to use, but are too nice to toss.

Scuttle from a '63 pickup. Other than the red oxide primer, it appears to be in good shape. I didn't see any obvious pitting.

Set of LMC Truck bumper brackets for the rear of a short step. I ordered them just before buying a parts stash that had OEM bumpers and brackets that I ended up using. I never got around to returning them.

Misc. OEM bumper brackets and fender braces. No idea whether they are for our trucks or not, but they came with mine and besides, free parts fit better.

Local pick up from 06776 would be preferred, but I'll listen to offers for shipping if you pay.

DM me here or email me at jaltemus@snet.net

All listed parts are available again. Bumper brackets and fender braces are boxed and ready to go.

StepSide1965 · 06-19-2017, 08:23 PM

I'm interested in the bumper brackets will pay shipping to 49445..
Thanks

Jimal · 06-20-2017, 10:31 AM

Quote:

Originally Posted by StepSide1965

I'm interested in the bumper brackets will pay shipping to 49445..
Thanks

The old brackets, the new brackets, or both?

StepSide1965 · 06-20-2017, 07:23 PM

New ones please, I have a long box step side..Thanks

Jimal · 06-23-2017, 08:41 AM

Quote:

Originally Posted by Jimal

I love the spirit of this thread. I sold my '65 K10 back in January, but I still have some random parts lying around that I'm not going to use, but are too nice to toss.

STILL AVAILABLE Scuttle from a '63 pickup. Other than the red oxide primer, it appears to be in good shape. I didn't see any obvious pitting.

GONE Set of LMC Truck bumper brackets for the rear of a short step. I ordered them just before buying a parts stash that had OEM bumpers and brackets that I ended up using. I never got around to returning them.

Misc. OEM bumper brackets (STILL AVAILABLE) and fender braces (GONE). No idea whether they are for our trucks or not, but they came with mine and besides, free parts fit better.

Local pick up from 06776 would be preferred, but I'll listen to offers for shipping if you pay.

DM me here or email me at jaltemus@snet.net

Somewhere along the way I dropped the door panels from the discussion

Someone take these door panels and scuttle before I get tired of tripping over them.

02-14-2017, 12:45 PM	#1
Kenfuzed Registered User Join Date: Jun 2014 Location: Glendora CA -> Tampa FL Posts: 587	Re: The 60-66 "PAYING IT FORWARD" thread! Just the axles and drums following my 6 to 5 swap. These are spoken for, glad someone could get some use out of them. __________________ 1966 C10 Short Fleetside 1988 Sportster, 2008 Street Glide Ken's 1966 C10 build "Red Ale" Follow on Instgram: @cv_performance https://instagram.com/cv_performance Harley Performance Parts: CV Performance (Harley related) Enjoying the ride!

02-26-2017, 12:07 AM	#2
ChevyApache61 Registered User Join Date: Feb 2017 Location: Sacramento, CA Posts: 2	Re: The 60-66 "PAYING IT FORWARD" thread! Ok guys I'm getting ready to do a front end swap for disc brakes on my 61.. so I will a front end up for grabs it has the torsion bars but is missing the steering linkage as previous owner took gearbox and everything out to install a ford rack n pinion, I also have that as well if anyone wants

03-26-2017, 03:25 PM	#3
Jbshawstad Registered User Join Date: Mar 2017 Location: Harker Heights Texas Posts: 22	Re: The 60-66 "PAYING IT FORWARD" thread! I have complete 1965 c10 short wheelbase frame. About to do frame swap, this one needs a home. Attached Images Last edited by Jbshawstad; 03-26-2017 at 03:27 PM. Reason: Add picture

03-30-2017, 12:44 PM	#5
53lowdown Junior Member Join Date: Feb 2005 Location: topeka, kansas Posts: 258	62 Rear End - Eaton 373 Rear end is gone 373 eaton rear end out of a 62 c10. It was usable but wanted a higher gear for highway so I swapped it out. Probable needs seals and possibly a pinion bearing. Complete with as pictured - Axles were redrilled to 5x4.75 bolt pattern. Attached Images __________________ _______________________________________ 62 SWB BBW (under construction) 86 Vette Convertible Last edited by 53lowdown; 04-09-2017 at 09:20 PM. Reason: Rear end is Gone

03-26-2017, 05:07 PM	#7
jayoldschool Moderator Join Date: Dec 2012 Location: ON, Canada Posts: 2,156	Re: The 60-66 "PAYING IT FORWARD" thread! Wow, this thread still delivers. Nice offer.

03-28-2017, 09:06 PM	#8
chevy2tom Senior Member Join Date: Aug 2009 Location: Wheeling, Illinois Posts: 703	Re: The 60-66 "PAYING IT FORWARD" thread! Yep, funny **** right there

03-30-2017, 12:52 PM	#9
63C20 Registered User Join Date: Dec 2016 Location: Lacey, WA Posts: 190	Re: The 60-66 "PAYING IT FORWARD" thread! I have a great condition ash tray for a 62 available for pickup in olympia washington

04-09-2017, 11:32 AM	#11
oem4me Registered User Join Date: Aug 2010 Location: Burbank CA Posts: 3,055	Re: The 60-66 "PAYING IT FORWARD" thread! Center license plate thingy for a fleetside sport bumper. A tad rough, but still holds a license plate just fine. The original light was cut out at some point, but the working replacement covers the hole. Pay the minimal shipping and it's yours. Attached Images

04-10-2017, 03:01 PM	#16
61Chevy454 Registered User Join Date: Mar 2017 Location: Wellsville, Missouri Posts: 103	Re: The 60-66 "PAYING IT FORWARD" thread! Can't wait till I get my truck back so I can give some stuff away!

04-21-2017, 10:38 AM	#17
Raked 64 Registered User Join Date: Apr 2012 Location: central, IL Posts: 119	Re: The 60-66 "PAYING IT FORWARD" thread! I have a reproduction black radiator fan shroud for a 64-66 that is new. I am near Springfield Il. Don't want to ship it as it is bulky and will be a pain. If someone can use it and is going to be in the area, PM me and I will hook you up. __________________ 1964 C-10 short bed 406 small block 700R4, 4:11 gears 20" wheels

04-29-2017, 02:35 AM	#18
sirJim Senior Member Join Date: Sep 2016 Location: Denmark Posts: 306	Re: The 60-66 "PAYING IT FORWARD" thread! This is NOT a WTB post. If someone posts up something they are giving away, you can ask for it but you cannot request items. Thanks for your understanding. Attached Images Last edited by chevy_mike; 05-03-2017 at 10:44 AM.

05-03-2017, 12:38 PM	#19
spookylynx Registered User Join Date: Mar 2013 Location: Vail, Colorado Posts: 163	Re: The 60-66 "PAYING IT FORWARD" thread! My project is done and I have some stuff to give away. I have... A full 1965 cab: low hump ,small back window, has typical rot in floor and corners but is not beyond repair. Dash, roof, A & B pillars & back panel all good. A 1965 hood: has damage to passenger front, but not beyond total repair, no rust. 1965 Gauge cluster: everything works, I swapped in all AutoMeter stuff. 1965 inline 6: Ran when pulled 3years ago, complete. Everything is for free (or some beer donations). BUT!!! I'm not able to ship anything so you have to come get it. Everything will be available until about June 3rd, then it is going to the recycler. TXT me is best: 9-seven-0 - three - nine -0 - two - nine -two- zero -Josh

05-29-2017, 11:43 AM	#20
Jimal Registered User Join Date: Jun 2014 Location: Connecticut Posts: 521	Re: The 60-66 "PAYING IT FORWARD" thread! I love the spirit of this thread. I sold my '65 K10 back in January, but I still have some random parts lying around that I'm not going to use, but are too nice to toss. Scuttle from a '63 pickup. Other than the red oxide primer, it appears to be in good shape. I didn't see any obvious pitting. Set of LMC Truck bumper brackets for the rear of a short step. I ordered them just before buying a parts stash that had OEM bumpers and brackets that I ended up using. I never got around to returning them. Misc. OEM bumper brackets and fender braces. No idea whether they are for our trucks or not, but they came with mine and besides, free parts fit better. Local pick up from 06776 would be preferred, but I'll listen to offers for shipping if you pay. DM me here or email me at jaltemus@snet.net

06-19-2017, 08:23 PM	#22
StepSide1965 Registered User Join Date: Aug 2013 Location: Muskegon Michigan Posts: 37	Re: The 60-66 "PAYING IT FORWARD" thread! I'm interested in the bumper brackets will pay shipping to 49445.. Thanks

06-20-2017, 07:23 PM	#24
StepSide1965 Registered User Join Date: Aug 2013 Location: Muskegon Michigan Posts: 37	Re: The 60-66 "PAYING IT FORWARD" thread! New ones please, I have a long box step side..Thanks



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.