The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > General Truck Forums > All 4x4 Tech & Off Roading > 4x4 Projects and Builds

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 05-12-2010, 09:29 PM   #276
Rack Man
Registered User
 
Join Date: Sep 2008
Location: Tempe, AZ
Posts: 770
Re: "FRAME OFF" Has Begun - Wish Me Luck! - Pics

Quote:
Originally Posted by Billhilly View Post
Just wondering how you are getting on with the wheel alignment thing?
One thing I did with mine during the build up of the chassis was snap a centreline lenghtwise under the chassis and then drew lines under where the front and rear diff's sat. I also measured the distance between the two diffs. Turns out both diff's wern't square to the centre line, and not parallel in relation to each other. I sratched my head for a long time and ended up turning one rear leaf end for end, and slotted out the hole in the right side of the front diff to allow the diff to be squared up. Got it 'pretty close' to everything heading in the same direction! Have no idea if any of this made it drive nice. Years away from finishing!
Let us know how you got on.
I took it in to have that work done....they adjusted the steering box, caster & toe.....oh yea and he actually had to add some tapered shims underneath the leafs on all four corners....he explained why but I honestly still don't understand what he was talking about....It was placed directly under the bottom leaf and was bolted to the spring pack!
__________________
My Build Thread: http://67-72chevytrucks.com/vboard/s...d.php?t=309288

Last edited by Rack Man; 05-12-2010 at 09:45 PM.
Rack Man is offline   Reply With Quote
Old 05-12-2010, 09:32 PM   #277
Rack Man
Registered User
 
Join Date: Sep 2008
Location: Tempe, AZ
Posts: 770
Re: "FRAME OFF" Has Begun - Wish Me Luck! - Pics

Quote:
Originally Posted by dammitmitchell View Post
Dang dude!
Quote:
Originally Posted by FRENCHBLUE72 View Post
Damn that turned out nice..
Quote:
Originally Posted by 0331grunt View Post
That is a beautiful truck!! Congrats
Quote:
Originally Posted by bowtieguy79 View Post
Nice Job! Love the color! you can't beat a Blue Chevy with a White top!

Thanks again guys....she came out pretty nice...not perfect but not bad...Now that the paint has been sanded and buffed it is like glass...now I just wish the panel alignment was a little better!....
__________________
My Build Thread: http://67-72chevytrucks.com/vboard/s...d.php?t=309288
Rack Man is offline   Reply With Quote
Old 05-12-2010, 09:37 PM   #278
Rack Man
Registered User
 
Join Date: Sep 2008
Location: Tempe, AZ
Posts: 770
Re: "FRAME OFF" Has Begun - Wish Me Luck! - Pics

Well got her back from my buddies shop where he did the alignment, power bled the brakes, charged the AC and lubed everything.....Then I got to enjoy my real first drive in it.....Ran awesome and the AC blew ice cold.....Still got some finishing touches to do but she is driveable and legal!...







__________________
My Build Thread: http://67-72chevytrucks.com/vboard/s...d.php?t=309288

Last edited by msgross; 06-16-2010 at 08:18 PM.
Rack Man is offline   Reply With Quote
Old 05-12-2010, 09:44 PM   #279
Teck
Registered User
 
Teck's Avatar
 
Join Date: Mar 2010
Location: Texas
Posts: 35
Re: "FRAME OFF" Has Begun - Wish Me Luck! - Pics

Truck really looks awsome. Great job.I just hope my blazer looks that good when I'm done with it.
__________________
1986 K5 Blazer
Teck is offline   Reply With Quote
Old 05-12-2010, 11:55 PM   #280
Critter
Future TOTM Winner
 
Critter's Avatar
 
Join Date: Aug 2006
Location: Bulverde, TX
Posts: 2,692
Re: "FRAME OFF" Has Begun - Wish Me Luck! - Pics

MMMM...that looks DELICIOUS!
__________________
72 Chevy CST K5 HIGHLANDER BLAZER Getting a 6.0,NV4500,NP205,14BFF (Currently laying all over the place in little pieces)
72 Chevy swb step-side "LS" 6.0 Here's a build thread of sorts
2002 HD2500 Crew Cab, 8.1L Allison 4x4 Daily Driver

Check it out www.lsdyno.com
Critter is offline   Reply With Quote
Old 05-13-2010, 08:03 AM   #281
msgross
Registered User
 
msgross's Avatar
 
Join Date: Jul 2006
Location: Central PA
Posts: 12,201
Re: "FRAME OFF" Has Begun - Wish Me Luck! - Pics

looks nice but you need to add some tow hooks now!
__________________
The Garage:
1968 K-10 SWB - "Project Money Pit"
1996 Z-71 - "huntin rig"
1969 C-10 LWB (SOLD) "Project flip that truck or else"
1993 Passport, F@rd 1-ton (SOLD)"Project Cousin Eddie"


My Garage Build "The 1,000 footer"
msgross is offline   Reply With Quote
Old 05-13-2010, 08:45 AM   #282
sdailey
The Few, The Proud
 
sdailey's Avatar
 
Join Date: Jun 2007
Location: Ball Ground, Georgia
Posts: 1,830
Re: "FRAME OFF" Has Begun - Wish Me Luck! - Pics

It turned out awesome Dan. Congratulations on a job well done.
__________________
Shannon
sdailey is offline   Reply With Quote
Old 05-13-2010, 11:33 AM   #283
SMORT
Registered User
 
SMORT's Avatar
 
Join Date: Jan 2010
Location: Timberlake,NC
Posts: 12
Re: "FRAME OFF" Has Begun - Wish Me Luck! - Pics

Better than new!!!
She's BEAUTIFUL!!!!
SMORT is offline   Reply With Quote
Old 05-13-2010, 02:44 PM   #284
watahyahknow
Registered User
 
watahyahknow's Avatar
 
Join Date: Jul 2006
Location: the netherlands europe
Posts: 4,335
Re: "FRAME OFF" Has Begun - Wish Me Luck! - Pics

Quote:
Originally Posted by SMORT View Post
Better than new!!!
She's BEAUTIFUL!!!!
that was my opinion too its is more perfect than when it was driven out of the factory
__________________
i got a job again and having fun at it too

idea's for the trucks and the order of things to do are taking shape and get closer to being realized , a few more months and i be able to start building for real

i complete 2 of the trucks intoo running fashion one custom and one basicly stock the thirth will be sacrificed for parts
watahyahknow is offline   Reply With Quote
Old 06-13-2010, 12:43 AM   #285
72Levi
Active Member
 
72Levi's Avatar
 
Join Date: Feb 2006
Location: sa tx
Posts: 851
Re: "FRAME OFF" Has Begun - Wish Me Luck! - Pics

Very nice, I admire your handwork and dedication. Many people have good intentions to actually do a frame off but you did it, congrats. Love the color!
__________________
1972 K5 Blazer ALL ORIGINAL paint & engine, A/C, Tilt, 4sp, AM/FM, Tow Hooks, Aux Battery Tray, Tach, Vacuum
2004 FORD FX4 SuperCrew
2005 CTS-V 12 sec family car
2008 Buick Enclave AWD, Nav, & DVD, Wife LOVES it!
72Levi is offline   Reply With Quote
Old 06-13-2010, 01:11 AM   #286
BAD4X4
Senior Member
 
BAD4X4's Avatar
 
Join Date: Jan 2003
Location: La pine Oregon
Posts: 1,668
Re: "FRAME OFF" Has Begun - Wish Me Luck! - Pics

Dan truck looks beautiful!!!!
__________________
1972 Cheyenne K-30 6"lift {502 PROJECT}
1972 Cheyenne K-30 8"lift 454 450hp {Ol'Blue}
1972 Cheyenne K-20 Custom Stretch 6" lift 454
1972 Custom Deluxe K-20 4" lift
2007 GMC Crew Cab Diesel 6"lift {The Tow Rig
2017 Ford F-350 Crew Cab 6.7 6"lift (Wife's)
1977 El Camino SS Grandpa baught new
1986 K-30 Crew Cab 502
1955 Chevy 2-Door gasser 454 550hp{project}
1956 Chevy Bel-Air 2-Door hardtop 572 700hp
1979 Ford F-350 All Original 4x4 (Wife's)
BAD4X4 is offline   Reply With Quote
Old 06-16-2010, 08:21 PM   #287
msgross
Registered User
 
msgross's Avatar
 
Join Date: Jul 2006
Location: Central PA
Posts: 12,201
Re: "FRAME OFF" Has Begun - Wish Me Luck! - Pics

better get your trophy case ready! Let me know and I can replace any of these pics that I posted in here... good luck what year was your truck?

http://67-72chevytrucks.com/vboard/s...d.php?t=407877
__________________
The Garage:
1968 K-10 SWB - "Project Money Pit"
1996 Z-71 - "huntin rig"
1969 C-10 LWB (SOLD) "Project flip that truck or else"
1993 Passport, F@rd 1-ton (SOLD)"Project Cousin Eddie"


My Garage Build "The 1,000 footer"

Last edited by msgross; 06-16-2010 at 08:25 PM.
msgross is offline   Reply With Quote
Old 06-17-2010, 09:28 PM   #288
Rack Man
Registered User
 
Join Date: Sep 2008
Location: Tempe, AZ
Posts: 770
Re: "FRAME OFF" Has Begun - Wish Me Luck! - Pics

Quote:
Originally Posted by msgross View Post
better get your trophy case ready! Let me know and I can replace any of these pics that I posted in here... good luck what year was your truck?

http://67-72chevytrucks.com/vboard/s...d.php?t=407877
Hey Mike, thanks for the nomination....I didn't even notice that!...Cool...

I haven't taken any new pics lately, so those are gonna have to do for now...By the way, the truck is a 70....I just went with the earlier style interior.....Have always loved the buddy buckets!


To everyone else who commented....thanks a bunch!.....I really appreciate it....Still have a few things left to do....gotta find time!




RM
__________________
My Build Thread: http://67-72chevytrucks.com/vboard/s...d.php?t=309288

Last edited by Rack Man; 06-17-2010 at 09:30 PM.
Rack Man is offline   Reply With Quote
Old 07-04-2010, 12:32 AM   #289
mcbassin
Still Learning
 
mcbassin's Avatar
 
Join Date: Jul 2009
Location: Central Oklahoma
Posts: 10,108
Re: "FRAME OFF" Has Begun - Wish Me Luck! - Pics

Congratulations on the Green name and totm award! truly an awesome truck and my favorite year too!
mcbassin is offline   Reply With Quote
Old 07-09-2010, 12:15 AM   #290
cable666guy
Registered User
 
cable666guy's Avatar
 
Join Date: Sep 2008
Location: Willow Grove, PA
Posts: 299
Re: "FRAME OFF" Has Begun - Wish Me Luck! - Pics

Congrats on TOTM!! Just went through the whole build, awesome job!! Also, I think this is the first one I've seen finished!! LOL!!
cable666guy is offline   Reply With Quote
Old 07-09-2010, 08:53 AM   #291
ERBSIX
Registered User
 
ERBSIX's Avatar
 
Join Date: Jun 2010
Location: Missouri
Posts: 208
Re: "FRAME OFF" Has Begun - Wish Me Luck! - Pics

This is probably an inappropriate question, but how much did the entire vintage air setup set you back?

The 78 Silverado I purchased has been retrofitted with the newer AC system, but it is definitely showing wear and tear, plus the VC system takes up a LOT less space...

So if you don't mind, I would greatly appreciate knowing.

Also, I echo cable666guy's statement that this might be the first truck build on this forum I've seen completed...
ERBSIX is offline   Reply With Quote
Old 07-09-2010, 01:32 PM   #292
ERBSIX
Registered User
 
ERBSIX's Avatar
 
Join Date: Jun 2010
Location: Missouri
Posts: 208
Re: "FRAME OFF" Has Begun - Wish Me Luck! - Pics

I just took the time to read every post.

Looking at the final pictures just doesn't do what happened to this truck justice.

No one (except who has read this thread or watched you step-by-step) who sees this truck will ever appreciate the craftsmanship, attention to detail and amount of work that went into this beauty.

By far one of the prettiest trucks I've seen. Hands down.
ERBSIX is offline   Reply With Quote
Old 07-11-2010, 03:34 AM   #293
Rack Man
Registered User
 
Join Date: Sep 2008
Location: Tempe, AZ
Posts: 770
Re: "FRAME OFF" Has Begun - Wish Me Luck! - Pics

Quote:
Originally Posted by ERBSIX View Post
This is probably an inappropriate question, but how much did the entire vintage air setup set you back?

The 78 Silverado I purchased has been retrofitted with the newer AC system, but it is definitely showing wear and tear, plus the VC system takes up a LOT less space...

So if you don't mind, I would greatly appreciate knowing.

Also, I echo cable666guy's statement that this might be the first truck build on this forum I've seen completed...
If I rememeber correctly, I think it was about $1,200.....kinda spendy, but it is a very nice system...and their customer service was top notch!


Quote:
Originally Posted by ERBSIX View Post
I just took the time to read every post.

Looking at the final pictures just doesn't do what happened to this truck justice.

No one (except who has read this thread or watched you step-by-step) who sees this truck will ever appreciate the craftsmanship, attention to detail and amount of work that went into this beauty.

By far one of the prettiest trucks I've seen. Hands down.
Thanks Man...I really appreciate that comment.....The trucks not perfect, but it is the best that I could do with the knowledge and resources I had available....I had never done anything like this before, so everything was a learning experience.....Luckily, I had this forum and couple buddies who helped guide me through a lot of it....




RM
__________________
My Build Thread: http://67-72chevytrucks.com/vboard/s...d.php?t=309288
Rack Man is offline   Reply With Quote
Old 07-11-2010, 10:29 AM   #294
ERBSIX
Registered User
 
ERBSIX's Avatar
 
Join Date: Jun 2010
Location: Missouri
Posts: 208
Re: "FRAME OFF" Has Begun - Wish Me Luck! - Pics

If that trucks not perfect, than I don't know which one is! :-)

Have you been driving it much?

What does the little lady think about it?

The ultimate test was I showed my wife your truck yesterday and she just loved it, which is saying a lot, she is really picky. :-)

She wants me to duplicate the same blue you used, and I'm set on a silver second tone. Much like the truck already looks (see here).

Finally, how does the vintage air system handle? Does it get cold fast and stay cold well? Also, since you're running an engine attached fan with shroud does your truck run hot when idling while the VA system is wide open cold?

I'm fairly positive I'm going to run dual electric fans instead of a motor mounted fan...
ERBSIX is offline   Reply With Quote
Old 07-11-2010, 11:52 AM   #295
Rack Man
Registered User
 
Join Date: Sep 2008
Location: Tempe, AZ
Posts: 770
Re: "FRAME OFF" Has Begun - Wish Me Luck! - Pics

Quote:
Originally Posted by ERBSIX View Post
If that trucks not perfect, than I don't know which one is! :-)

Have you been driving it much?

What does the little lady think about it?

The ultimate test was I showed my wife your truck yesterday and she just loved it, which is saying a lot, she is really picky. :-)

She wants me to duplicate the same blue you used, and I'm set on a silver second tone. Much like the truck already looks (see here).

Finally, how does the vintage air system handle? Does it get cold fast and stay cold well? Also, since you're running an engine attached fan with shroud does your truck run hot when idling while the VA system is wide open cold?

I'm fairly positive I'm going to run dual electric fans instead of a motor mounted fan...
I have put about 500 miles on it so far, just trying to get everything broke in....and fix any of the 'Settling of components" issues....LOL

My Woman loves the truck but at the same time prefers to drive in her new car

Silver is one of my other favorite colors....but the blue I painted mine has always been my all time favorite color....I think it has a lot to do with the 69 Camaro I use to own, that was Lemans Blue & White.....I miss that car!

The VA system works perfect and blows ice cold.....and stays cold!....I live in AZ where the temps have been in the 110 to 115 range lately and it has performed perfect....I have had no problems with the truck getting hot at idle either......but the engine is pretty stock and the 4 core radiator really helps...Th e only thing with VA system (and the other aftermarket systems) is that the fan is on the interior of the cab, so it is louder than the factory systems...




RM
__________________
My Build Thread: http://67-72chevytrucks.com/vboard/s...d.php?t=309288

Last edited by Rack Man; 07-11-2010 at 11:52 AM.
Rack Man is offline   Reply With Quote
Old 07-12-2010, 07:34 AM   #296
ERBSIX
Registered User
 
ERBSIX's Avatar
 
Join Date: Jun 2010
Location: Missouri
Posts: 208
Re: "FRAME OFF" Has Begun - Wish Me Luck! - Pics

Awesome news on all accounts.

Thanks a million for answering my million questions. :-)
ERBSIX is offline   Reply With Quote
Old 07-31-2010, 04:06 PM   #297
Rack Man
Registered User
 
Join Date: Sep 2008
Location: Tempe, AZ
Posts: 770
Re: "FRAME OFF" Has Begun - Wish Me Luck! - Pics

Well its been a good journey but it looks like I'm gonna have to sell her.....Just finished being audited by the IRS yesterday for a business I was a partner in back in 04, 05 & 06....and it did not go good......Let's just say, I guess I owe them a crapload of $$....I am so upset and sick about this....Our tax system is a joke and does nothing but confuse everyone....including my accountant who handled all of our books.....So with the economy still as bad as it is here in AZ and not having the money to pay them, I'm gonna have to sell the truck.....SUCKS!


__________________
My Build Thread: http://67-72chevytrucks.com/vboard/s...d.php?t=309288

Last edited by Rack Man; 07-31-2010 at 09:16 PM.
Rack Man is offline   Reply With Quote
Old 07-31-2010, 04:13 PM   #298
corvetteman10
Registered User
 
Join Date: Jun 2009
Location: riverside,ca
Posts: 32
Re: "FRAME OFF" Has Begun - Wish Me Luck! - Pics

That is a damned shame. I'm really sorry to hear that. I've been watching this build for a long time and it is one of the nicer originals I've seen. I wish I had the money to take her off of your hands. Beautiful truck. Just get back on your feet and do it all over again! Good luck man!
__________________
'72 cheyenne10 tilt, tach, a/c, posi
'70 custom10- daily grind
corvetteman10 is offline   Reply With Quote
Old 07-31-2010, 05:57 PM   #299
dammitmitchell
the pollock
 
dammitmitchell's Avatar
 
Join Date: May 2008
Location: abilene, texas
Posts: 4,423
Re: "FRAME OFF" Has Begun - Wish Me Luck! - Pics

willing to take trade? ill bring mine!
that is unbelievably crappy brother..
there's gotta be a way to settle it..
that's just redicilious..
or at least a reasonable payment plan...
__________________
Jack of ALL trades, Master of none.. (but one... procrastination)
Army vet 02-08
RIP El Jay! Miss you brother!


http://67-72chevytrucks.com/vboard/s...d.php?t=343538
http://67-72chevytrucks.com/vboard/s...d.php?t=386042
dammitmitchell is offline   Reply With Quote
Old 07-31-2010, 10:20 PM   #300
ERBSIX
Registered User
 
ERBSIX's Avatar
 
Join Date: Jun 2010
Location: Missouri
Posts: 208
Re: "FRAME OFF" Has Begun - Wish Me Luck! - Pics

No dude. This is crap.

Listen, my mother is a CPA and I understand there are legalities involved in this.

Is the IRS going to FORCE you to sell your assets to pay the bill?

Is there any way you can sell them for less than they are worth, legally?

Because we could easily have a board member purchase the truck from you for say, $100-$1000. Hold it for you until this crap is over, and then sell it back to you for the same you sold it for.

That is, if you want to keep it.

I would drive to Arizona to do that for you so you don't lose this thing.

Screw the IRS.

Ask your Attorney, CPA or IRS Auditor if you can sell the truck, say exactly this:

"I have already found a buyer for my truck. They will give me $1000 for it tomorrow. Can I sell it?"

And see what their response is.

If you legally can, then find a family member, or someone you trust, have them buy it, and buy it back later.

I HATE THE IRS!
__________________
78 Silverado 1/2 Ton LWB (restore)
78 Silverado 3/4 Ton LWB (parts truck & practice - eventually a work horse)

My Build thread: http://67-72chevytrucks.com/vboard/s....php?p=4082128

Ellis Benus - Web Design Columbia Mo & Google Fan Boy!

Last edited by ERBSIX; 07-31-2010 at 10:21 PM.
ERBSIX is offline   Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 09:10 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com