post your 67-72 4x4 - Page 12 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

glimmertwin01 · 10-02-2010, 07:17 PM

sweet! thats the color mines going back to...

68 TT · 10-04-2010, 12:48 PM

Quote:

Originally Posted by glimmertwin01

sweet! thats the color mines going back to...

Same color my 67 was. Wish mine was even close to as nice as yours.

Cdshinne · 10-04-2010, 08:25 PM

Here's a couple pics i took today of my 72 k20. Started with a 72 k20 frame then found a 72 gmc 1500 and set the body on her. Still have a ways to go but I plan on painting it back to the red orange and white and adding a 2 1/2 inch lift!

68 TT · 10-05-2010, 02:08 PM

Quote:

Originally Posted by Cdshinne

Here's a couple pics i took today of my 72 k20. Started with a 72 k20 frame then found a 72 gmc 1500 and set the body on her. Still have a ways to go but I plan on painting it back to the red orange and white and adding a 2 1/2 inch lift!

Great start on building a cool truck.

Can you take a closer pic of the trans tunnel area for me? It would help me a lot in the fab work I am doing on mine.

Cdshinne · 10-05-2010, 09:18 PM

Quote:

Originally Posted by 68 TT

Great start on building a cool truck.

Can you take a closer pic of the trans tunnel area for me? It would help me a lot in the fab work I am doing on mine.

I cant take to much credit for the fab work all i did was cut out that section and ad a high hump tunnel from a 4x4 cab. I have seen the high hump tunnels in the sites classifieds for no more than $40.

68 TT · 10-06-2010, 10:33 AM

Quote:

Originally Posted by Cdshinne

I cant take to much credit for the fab work all i did was cut out that section and ad a high hump tunnel from a 4x4 cab. I have seen the high hump tunnels in the sites classifieds for no more than $40.

Thanks, that helps a lot. I looked locally for quite a while but couldn't find a 67-72 part so I am fitting a newer one to my 67. I would like to get as close to the 67-72 look as I can so a stock carpet set might fit or at least be close.

I have a square body K10 high hump and a square body K5 one too plus the floor section that went around them. The K10 part is pretty close to the length of the stock 67-72 part and the side flanges line up with the 67 floor but the back does not transition down so I will have to fabricate the rear transition area to fit.

BLAZERMAN · 11-01-2010, 12:39 AM

Quote:

Originally Posted by Cdshinne

I cant take to much credit for the fab work all i did was cut out that section and ad a high hump tunnel from a 4x4 cab. I have seen the high hump tunnels in the sites classifieds for no more than $40.

Actually you dont need a high hump for a 4x4 with an automatic..the stock low hump works great. A 4 speed would need it though.

68 TT · 11-01-2010, 11:49 AM

Quote:

Originally Posted by BLAZERMAN

Actually you dont need a high hump for a 4x4 with an automatic..the stock low hump works great. A 4 speed would need it though.

I agree. I just put a 4L60E and NP208 into my low hump 67 C10 and it cleared with at least an inch in all areas.

I'm only putting the high hump tunnel in there for the easy access and so the NP208 shifter has somewhere to go plus I have the tunnel parts out of the TC donor so why not. I think the NP208 shifter linkage may hit the trans or TC with a low hump. If I had an NP205 or 203 in there it would clear for sure with their different TC shifter design.

Cdshinne · 11-01-2010, 09:35 PM

I did not know that, i cut the low hump out before i tried putting the cab on. I would have cut it out anyway just because i want the truck to look as factory as possible. Good to know though

jdifazzio · 10-28-2010, 10:40 PM

what dya think about my baby? 8" lift 1 ton axles blown smally soon to have 38.5 swampers?

jdifazzio · 10-28-2010, 10:54 PM

also looking for any info of nv4500 transplant? best price? all necessary changes?

Chevymaniac · 10-30-2010, 04:11 AM

Nice looking truck, what color is it? I'am doing similar mods to my 71 GMC LWB. Make sure to include new pics with the swampers install.

6772owner · 11-02-2010, 09:25 AM

71blazerdetroit: Blazer is looking good! Awesome wheels btw!

**72 tigger** · 11-06-2010, 06:25 PM

My 72 daily driver (even in the winter) with a complete 02 Dodge drivetrain under it. The 72 was a total (hard LF hit) out of Texas & the Dodge was a totaled roll over. Built it 7 years ago & it seems to work well.

Thebeast72 · 12-09-2010, 02:06 PM

awesome ride!

Mikey72 · 12-18-2010, 08:32 PM

This is my 72 4x4, its a work in progress, mainly the interior.

mud.man.rj · 12-12-2011, 12:01 AM

There are some very nice 67-72 4x4's here, thanks guy's. I just bought my old truck back I sold in 2004. I built it all new for my buddy one year ago and only has 300 miles on it. I just picked thru the whole truck and drove it is back on the road today, lovin it. Some spec's are LS5 454 with 525hp/ sm465 trans/205 t.case/one piece drive shaft/5" spring lift/35"SSR swamper radials/hooker headers/3" full flowmaster exhaust/lockers front and back/Full Autometer gauge set in factory dash/even a roll pan. Need 2 doors as were skinned (crappy job) and paint. Very fun with over 500hp.
http://i1199.photobucket.com/albums/...j/DSCF8097.jpg
http://i1199.photobucket.com/albums/...j/DSCF8100.jpg
http://i1199.photobucket.com/albums/...j/DSCF8089.jpg
http://i1199.photobucket.com/albums/...j/DSCF8094.jpg
Happy to have it back and keeping it now.

glimmertwin01 · 11-06-2010, 07:40 PM

wow thats some craftsmanship.... but you need a cummins valve cover... JK

**72 tigger** · 11-07-2010, 09:26 AM

I agree - do they make a Cummins valve cover? I did get rid of the ram on the steering wheel!

**Dieselwrencher** · 11-18-2010, 07:02 PM

Quote:

Originally Posted by 72 tigger

I agree - do they make a Cummins valve cover? I did get rid of the ram on the steering wheel!

Here you go, your choice of red, or plain.
http://hoeslidiesel.com/store/page12.html

glimmertwin01 · 11-07-2010, 09:39 AM

great job makin everything fit in that truck..... thats a great use for a cummins...
how many hours did all of that take you? did the wheelbase match well?

**72 tigger** · 11-07-2010, 07:16 PM

It took 5 months to build- working evenings & saturdays. Had to cut 12.5 inches out of the frame to shorten the wheelbase. Thanks for the compliments.

bfay17 · 11-10-2010, 11:56 PM

Heres my 70 3/4 ton 454/sm465/np205

coggonobrien · 11-11-2010, 01:14 AM

Quote:

Originally Posted by bfay17

Heres my 70 3/4 ton 454/sm465/np205

what lift/tire size/wheel backspacing? also as for using the sm465 was your truck equipped with that originally or did you adapt a 2wd version?

Thanks,
David

bfay17 · 11-11-2010, 01:36 AM

Im not entirely sure on the lift im guessing 4-5" front and around 6" in the back. Wheels are 36x12.5 military oz. I have no idea on the backspacing all i know is they stick out pretty good. The sm465 came in the truck from factory. I did have to make a custom linkage and z bar to use it due to the massive primarys on the headers

10-02-2010, 07:17 PM	#1
glimmertwin01 Registered User Join Date: Mar 2008 Location: Rochester NY Posts: 1,022	Re: post your 67-72 4x4 sweet! thats the color mines going back to... __________________ 67/68 K/20 "The BEAST" 68 K15 V6 LWB. 73 K20 GMC Burb "The Bomber" 74 K/5 74 K20 Custom Deluxe 86 K10 Shorty 92 K2500 Burb 95 K2500 GMC Life is what you make it Live each day like it was your last Old GM Trucks never go out of style

10-04-2010, 08:25 PM	#3
Cdshinne Registered User Join Date: May 2009 Location: Kokomo, Indiana Posts: 79	Re: post your 67-72 4x4 Here's a couple pics i took today of my 72 k20. Started with a 72 k20 frame then found a 72 gmc 1500 and set the body on her. Still have a ways to go but I plan on painting it back to the red orange and white and adding a 2 1/2 inch lift! Attached Images __________________ 1972 K20 lwb 2000 Z71 x-cab 1970 ford f100

11-01-2010, 09:35 PM	#9
Cdshinne Registered User Join Date: May 2009 Location: Kokomo, Indiana Posts: 79	Re: post your 67-72 4x4 I did not know that, i cut the low hump out before i tried putting the cab on. I would have cut it out anyway just because i want the truck to look as factory as possible. Good to know though __________________ 1972 K20 lwb 2000 Z71 x-cab 1970 ford f100

10-28-2010, 10:40 PM	#10
jdifazzio Registered User Join Date: Nov 2008 Location: genevaillinois Posts: 16	Re: post your 67-72 4x4 what dya think about my baby? 8" lift 1 ton axles blown smally soon to have 38.5 swampers? Attached Images Last edited by jdifazzio; 10-28-2010 at 10:51 PM. Reason: add pic

10-28-2010, 10:54 PM	#11
jdifazzio Registered User Join Date: Nov 2008 Location: genevaillinois Posts: 16	Re: post your 67-72 4x4 also looking for any info of nv4500 transplant? best price? all necessary changes? Last edited by jdifazzio; 10-28-2010 at 10:55 PM. Reason: punctuation

10-30-2010, 04:11 AM	#12
Chevymaniac Registered User Join Date: Feb 2010 Location: Kitimat, British Columbia, Canada Posts: 234	Re: post your 67-72 4x4 Nice looking truck, what color is it? I'am doing similar mods to my 71 GMC LWB. Make sure to include new pics with the swampers install.

11-02-2010, 09:25 AM	#13
6772owner Gearhead Join Date: Jan 2008 Location: Colorado Posts: 1,193	Re: post your 67-72 4x4 71blazerdetroit: Blazer is looking good! Awesome wheels btw! __________________ 2002 Saturn SL2, My D/D 2019 Ford Fusion SE, Ecoboost - Wife's D/D 1993 Camaro Z28, A4, CAI, Cat-Back Exhaust Project C10 (my 72' C10 w/96' LT1, 700R4, bagged F&R, 18's (for now), Short/Fleet) -- SOLD! Build Thread: http://67-72chevytrucks.com/vboard/s...d.php?t=313644

11-06-2010, 06:25 PM	#14
72 tigger Senior Member Join Date: Apr 2008 Location: Berne IN Posts: 3,240	Re: post your 67-72 4x4 My 72 daily driver (even in the winter) with a complete 02 Dodge drivetrain under it. The 72 was a total (hard LF hit) out of Texas & the Dodge was a totaled roll over. Built it 7 years ago & it seems to work well. Attached Images

12-09-2010, 02:06 PM	#15
Thebeast72 Registered User Join Date: Mar 2009 Location: Deer Park Wa Posts: 32	Re: post your 67-72 4x4 awesome ride! Last edited by Thebeast72; 12-09-2010 at 02:09 PM.

12-18-2010, 08:32 PM	#16
Mikey72 Registered User Join Date: Sep 2010 Location: havelock, n.c. Posts: 19	Re: post your 67-72 4x4 This is my 72 4x4, its a work in progress, mainly the interior. Attached Images

12-12-2011, 12:01 AM	#17
mud.man.rj Registered User Join Date: Dec 2011 Location: Creighton Sask. Canada Posts: 4,121	Re: post your 67-72 4x4 There are some very nice 67-72 4x4's here, thanks guy's. I just bought my old truck back I sold in 2004. I built it all new for my buddy one year ago and only has 300 miles on it. I just picked thru the whole truck and drove it is back on the road today, lovin it. Some spec's are LS5 454 with 525hp/ sm465 trans/205 t.case/one piece drive shaft/5" spring lift/35"SSR swamper radials/hooker headers/3" full flowmaster exhaust/lockers front and back/Full Autometer gauge set in factory dash/even a roll pan. Need 2 doors as were skinned (crappy job) and paint. Very fun with over 500hp. http://i1199.photobucket.com/albums/...j/DSCF8097.jpg http://i1199.photobucket.com/albums/...j/DSCF8100.jpg http://i1199.photobucket.com/albums/...j/DSCF8089.jpg http://i1199.photobucket.com/albums/...j/DSCF8094.jpg Happy to have it back and keeping it now.

11-06-2010, 07:40 PM	#18
glimmertwin01 Registered User Join Date: Mar 2008 Location: Rochester NY Posts: 1,022	Re: post your 67-72 4x4 wow thats some craftsmanship.... but you need a cummins valve cover... JK __________________ 67/68 K/20 "The BEAST" 68 K15 V6 LWB. 73 K20 GMC Burb "The Bomber" 74 K/5 74 K20 Custom Deluxe 86 K10 Shorty 92 K2500 Burb 95 K2500 GMC Life is what you make it Live each day like it was your last Old GM Trucks never go out of style

11-07-2010, 09:26 AM	#19
72 tigger Senior Member Join Date: Apr 2008 Location: Berne IN Posts: 3,240	Re: post your 67-72 4x4 I agree - do they make a Cummins valve cover? I did get rid of the ram on the steering wheel!

11-07-2010, 09:39 AM	#21
glimmertwin01 Registered User Join Date: Mar 2008 Location: Rochester NY Posts: 1,022	Re: post your 67-72 4x4 great job makin everything fit in that truck..... thats a great use for a cummins... how many hours did all of that take you? did the wheelbase match well? __________________ 67/68 K/20 "The BEAST" 68 K15 V6 LWB. 73 K20 GMC Burb "The Bomber" 74 K/5 74 K20 Custom Deluxe 86 K10 Shorty 92 K2500 Burb 95 K2500 GMC Life is what you make it Live each day like it was your last Old GM Trucks never go out of style

11-07-2010, 07:16 PM	#22
72 tigger Senior Member Join Date: Apr 2008 Location: Berne IN Posts: 3,240	Re: post your 67-72 4x4 It took 5 months to build- working evenings & saturdays. Had to cut 12.5 inches out of the frame to shorten the wheelbase. Thanks for the compliments.



Register or Log In To remove these advertisements.

11-10-2010, 11:56 PM	#23
bfay17 Young Gun Join Date: Aug 2008 Location: Waupaca, Wi Posts: 192	Re: post your 67-72 4x4 Heres my 70 3/4 ton 454/sm465/np205 Attached Images

11-11-2010, 01:36 AM	#25
bfay17 Young Gun Join Date: Aug 2008 Location: Waupaca, Wi Posts: 192	Re: post your 67-72 4x4 Im not entirely sure on the lift im guessing 4-5" front and around 6" in the back. Wheels are 36x12.5 military oz. I have no idea on the backspacing all i know is they stick out pretty good. The sm465 came in the truck from factory. I did have to make a custom linkage and z bar to use it due to the massive primarys on the headers

Register or Log In To remove these advertisements.