11-06-2023, 01:45 PM | #276 |
Registered User
Join Date: Jan 2013
Location: roseville
Posts: 823
|
Re: 1958 Apache Big Window Loooooong Bed "Lucky"
Since FlatOut is in SoCal, and I'm just 6 hours north, I got my part super fast and tossed it in yesterday.. HUGE difference in space, and whaddya know, the rear suspension actually has travel now!! I used to think my spring rate was way too high...
Waaay more room with this setup, not to mention the ease of adjustability(which wasn't needed but was appreciated!)
__________________
My Current Trucks: 1958 Apache BBW 4.8LS/4l60 "Lucky" Built By Me 1958 GMC BBW LS1/4l60 "The Kraken" Built By Delmo |
11-06-2023, 01:49 PM | #277 |
Registered User
Join Date: Jan 2013
Location: roseville
Posts: 823
|
Re: 1958 Apache Big Window Loooooong Bed "Lucky"
More photos where you can see how lowering the center point and mounting below instead of above the link attachment point really added a good amount of clearance.
Clearly, Don has seen this issue numerous times over the years! The kit also keeps a nice geometry that allows these rods to stay roughly parallel with half shafts, which I understand to be necessary for this suspension to function well. I think I could still find a DIY solution, but it wouldn't look this sexy. Also check out how perfect the Mustang tank is for providing access to the centerpoint! It looks like I planned it that way all along.
__________________
My Current Trucks: 1958 Apache BBW 4.8LS/4l60 "Lucky" Built By Me 1958 GMC BBW LS1/4l60 "The Kraken" Built By Delmo |
11-06-2023, 01:54 PM | #278 |
Registered User
Join Date: Nov 2010
Location: calgary alberta
Posts: 8,174
|
Re: 1958 Apache Big Window Loooooong Bed "Lucky"
that looks good. prolly less tire wear now too as they would likley toe in and out, with the old set up, as your suspension moved. well, maybe not if it couldn't move, lol.
|
11-06-2023, 02:15 PM | #279 | |
Registered User
Join Date: Jan 2013
Location: roseville
Posts: 823
|
Re: 1958 Apache Big Window Loooooong Bed "Lucky"
Quote:
Next up for the rear is seeing if I need to roll/trim the fender lip to clear these 225 BFG's....right now there is enough camber on each wheel to prevent rubbing, but if I correct that, I miiiiiight be in trouble!
__________________
My Current Trucks: 1958 Apache BBW 4.8LS/4l60 "Lucky" Built By Me 1958 GMC BBW LS1/4l60 "The Kraken" Built By Delmo |
|
11-06-2023, 02:17 PM | #280 |
Registered User
Join Date: Nov 2010
Location: calgary alberta
Posts: 8,174
|
Re: 1958 Apache Big Window Loooooong Bed "Lucky"
Personally I like a finger space between but that's just me. You could space the fender away from the box if need be.
|
11-07-2023, 01:51 PM | #281 | |
Registered User
Join Date: Jan 2013
Location: roseville
Posts: 823
|
Re: 1958 Apache Big Window Loooooong Bed "Lucky"
Quote:
I do as well, but not enough to buy new tires or make custom fender extensions Since camber "solves" the problem and its not a commuter, it feels pretty optional...I'll likely add some more clearance in the lip, get the tires in a little closer, and just drive
__________________
My Current Trucks: 1958 Apache BBW 4.8LS/4l60 "Lucky" Built By Me 1958 GMC BBW LS1/4l60 "The Kraken" Built By Delmo |
|
11-07-2023, 01:59 PM | #282 |
Registered User
Join Date: Jan 2013
Location: roseville
Posts: 823
|
Re: 1958 Apache Big Window Loooooong Bed "Lucky"
Drivers side door is looking pretty complete!
This looks like just a regular old boring door... but I have spent HOURS to get to this point.
__________________
My Current Trucks: 1958 Apache BBW 4.8LS/4l60 "Lucky" Built By Me 1958 GMC BBW LS1/4l60 "The Kraken" Built By Delmo |
11-07-2023, 10:27 PM | #283 |
Registered User
Join Date: Aug 2017
Location: Danville Nh
Posts: 231
|
Re: 1958 Apache Big Window Loooooong Bed "Lucky"
looking good. I had considered buying that flip kit back when I bought my flat out kit. I think the price has gone up $100 since. Guess I shouldn't have waited
I just installed some repo exterior door handles and arm rest. I was surprised that the aftermarket interior trim panel did not come with the holes for the arm rest drilled.
__________________
1955 chevy longbed shortened, C4 vette suspension front and rear with flatout kit. Gen V LT1/8L90 http://67-72chevytrucks.com/vboard/s...d.php?t=746958 |
11-08-2023, 12:48 PM | #284 | |
Registered User
Join Date: Jan 2013
Location: roseville
Posts: 823
|
Re: 1958 Apache Big Window Loooooong Bed "Lucky"
Quote:
I drilled new holes and raised the brackets on the rear kit, and I'm also at the very bottom of these coilovers, so you might not need it. The FlatOut kits sit too high in the rear for my tastes, which is why I adjusted the brackets and narrowed the frame channel. I know you are hoping for yours to come down with some bed wood, but just have someone stand in it and see if you like the height...better to address it now!
__________________
My Current Trucks: 1958 Apache BBW 4.8LS/4l60 "Lucky" Built By Me 1958 GMC BBW LS1/4l60 "The Kraken" Built By Delmo |
|
12-28-2023, 03:29 PM | #285 |
Registered User
Join Date: Jan 2013
Location: roseville
Posts: 823
|
Re: 1958 Apache Big Window Loooooong Bed "Lucky"
The last bit of regular progress has been fueled by one mission: Go on a lil cruise with my Grandpa while he's still around (which isn't much longer).
Grandpa got me started tinkering on things when I was little, so it's only fitting. Mission Accomplished.
__________________
My Current Trucks: 1958 Apache BBW 4.8LS/4l60 "Lucky" Built By Me 1958 GMC BBW LS1/4l60 "The Kraken" Built By Delmo |
12-28-2023, 07:08 PM | #286 |
Senior Member
Join Date: Oct 2014
Location: Eagle, ID
Posts: 3,018
|
Re: 1958 Apache Big Window Loooooong Bed "Lucky"
Very nice!!!
|
12-29-2023, 03:47 PM | #287 |
Registered User
Join Date: Aug 2017
Location: Danville Nh
Posts: 231
|
Re: 1958 Apache Big Window Loooooong Bed "Lucky"
Thats awsome!
__________________
1955 chevy longbed shortened, C4 vette suspension front and rear with flatout kit. Gen V LT1/8L90 http://67-72chevytrucks.com/vboard/s...d.php?t=746958 |
01-01-2024, 11:43 PM | #288 |
Senior Member
Join Date: Aug 2010
Location: Shasta Lake, CA.
Posts: 1,619
|
Re: 1958 Apache Big Window Loooooong Bed "Lucky"
Happy New Year and congrats on mission accomplished !
__________________
Glen & Jane's Rides ‘57 GMC NAPCO Long Bed V8 4 speed Bought 2008 7 other cars & trucks , 5 trailers '56 Chevy Long Bed I6, 4 speed Bought 1990 Sold 8.22.2020 ’56 GMC Suburban Pickup V8, 4 speed Hydramatic Bought 1996 Sold 10.11.2020 My Other Tinkerings http://67-72chevytrucks.com/vboard/s...75#post8967275 |
01-02-2024, 12:21 PM | #289 |
Registered User
Join Date: Nov 2011
Location: Middle Georgia
Posts: 299
|
Re: 1958 Apache Big Window Loooooong Bed "Lucky"
Awesome!!!
|
01-02-2024, 12:27 PM | #290 |
Registered User
Join Date: Sep 2018
Location: Ontario
Posts: 834
|
Re: 1958 Apache Big Window Loooooong Bed "Lucky"
Well done, That is great.
congratulations
__________________
https://67-72chevytrucks.com/vboard/...=797726&page=3http://https://67-72chevytrucks.com/...=797726&page=3 51 Chev 5 window on S10 with SBC 1958 Pontiac Wagon build https://67-72chevytrucks.com/vboard/...d.php?t=849781 |
01-04-2024, 02:28 PM | #291 |
Registered User
Join Date: Jan 2013
Location: roseville
Posts: 823
|
Re: 1958 Apache Big Window Loooooong Bed "Lucky"
Thanks, yall. I'm glad I got to have this moment with him.
I'll probably start tinkering on it again soon enough, it still needs plenty of work... a whole interior, a flip up bed, some wiring clean up, and who knows what else, but that stuff alone will keep me pretty busy
__________________
My Current Trucks: 1958 Apache BBW 4.8LS/4l60 "Lucky" Built By Me 1958 GMC BBW LS1/4l60 "The Kraken" Built By Delmo |
02-26-2024, 07:48 PM | #292 |
Senior Member
Join Date: Aug 2010
Location: Shasta Lake, CA.
Posts: 1,619
|
Re: 1958 Apache Big Window Loooooong Bed "Lucky"
Time for an update ?
__________________
Glen & Jane's Rides ‘57 GMC NAPCO Long Bed V8 4 speed Bought 2008 7 other cars & trucks , 5 trailers '56 Chevy Long Bed I6, 4 speed Bought 1990 Sold 8.22.2020 ’56 GMC Suburban Pickup V8, 4 speed Hydramatic Bought 1996 Sold 10.11.2020 My Other Tinkerings http://67-72chevytrucks.com/vboard/s...75#post8967275 |
03-03-2024, 03:20 PM | #293 |
Registered User
Join Date: Jan 2013
Location: roseville
Posts: 823
|
Re: 1958 Apache Big Window Loooooong Bed "Lucky"
It SHOULD be, but I haven't touched the truck in a lil bit.
If I do any tinkering right now, its going to be on your 56 big block!
__________________
My Current Trucks: 1958 Apache BBW 4.8LS/4l60 "Lucky" Built By Me 1958 GMC BBW LS1/4l60 "The Kraken" Built By Delmo Last edited by daveshilling; 03-03-2024 at 03:29 PM. |
05-29-2024, 12:18 PM | #294 |
Registered User
Join Date: Nov 2011
Location: Middle Georgia
Posts: 299
|
Re: 1958 Apache Big Window Loooooong Bed "Lucky"
Don't know if you're still looking, but these are still available and the price is dropping and open to offers.
https://www.jalopyjournal.com/forum/...uards.1303192/ |
Bookmarks |
|
|