Project 67 DRGNWGN - 67 Burban!! - Page 12 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**kev2809** · 01-10-2011, 07:25 PM

lol its cool..

heres some pics of the stuff i put together over the weekend. amazing how the elements can make "brand new" look hideous lol

i will clean those rotors up with a scuff pad before driving it. also still waiting on the brake lines. i do have to the shocks ready to put in, just need to get new bottom mounts bolts/nuts and the top nuts.
these bags give me a lot more clearance so now i wont have to worry about my bag rubbing...peace of mind i guess

**kev2809** · 01-15-2011, 06:17 PM

nothing special, just decided to post of pic of the shocks i used. Monroe pn 5752, from a 50 Chrysler.

i did get the passenger side 73 brake line ran, waiting on the adapter fitting for the driver side and the front is pretty much wrapped up other than the brake booster and master cylinder

67chevy1series · 01-16-2011, 02:01 AM

hows paint and body comin!!!!!!!!!

**kev2809** · 01-16-2011, 01:33 PM

lol..i put it on hold for a little bit, the weather has been cold and rainy lately, so i been tryin to wrap up this front suspension so i can get back on it. on a side note, i took the front wheels and had the tires removed so i can strip them down and paint them and get new tires put on.
Posted via Mobile Device

67chevy1series · 01-16-2011, 01:51 PM

well that is too bad i was lookin forward to seeing that long low and black!!!!!

**kev2809** · 01-17-2011, 07:56 PM

had a few hours today to get some work in, got the front 2 wheels sanded down with a wire wheel and then used 80 grit to rough it up, shot 3 coats of rustoleum self etching primer on it. wasnt trying to get them down to bare metal, just good enough to get the paint to stick. these rims does have its fair shair dings and scratches, but i think they should look good when they are done. later during the week i should get a few coats of single stage black on, then either this weekend or monday im taking them to get the tires mounted...stay tuned!

Before

Primed

**kev2809** · 01-22-2011, 02:53 PM

and with 2 coats of valspar high gloss mixed with hardener and some thinner..this stuff is taking forever to dry! i found some areas that got light coated, so ill just go back over those with some rattle can.

67chevy1series · 01-22-2011, 02:58 PM

i hope i can do those to my rim when i get them i am going to run those rims in red and a skinny whit line tire with the original 67 dog dishes on mine...... no joke when i looked a the wheel i had to squint my eyes a little bit either i am on here way to much or those are seriously gloss!

**kev2809** · 01-22-2011, 03:14 PM

lol..i was hoping they would shine a little bit

the red would look cool with a white wall tire. im debating on getting NEW tires, or good used ones. they about 70 a piece for a new tire with the thin whitewall..the used are about 80-100 a set.

still trying to decide also whether or not to order some baby moon caps..

67chevy1series · 01-22-2011, 03:20 PM

i dont know if moons would look good you should have the photoshop guys work wonders for you so you can get an idea

**kev2809** · 01-22-2011, 03:33 PM

well the problem im having is the only ones that will fit are 10 inches..the nubs on mine are on the outside of the inner circle. i dont know if moons that big would look good. i dont want to drown out the black paint that much. i wish there some that went on the inside of the inner circle that snapped on..

67chevy1series · 01-22-2011, 03:39 PM

ya i dont think your gonna be able to run moons then

**kev2809** · 01-22-2011, 07:54 PM

well the paint took about 5 hours to cure to touch, so hopefully the tire shops are open tomorrow and ima go grab a few tires for these and slap em on and then take off the rears.

had a few minutes today to get something done while the kids fell asleep. finally got the front window out! felt relieved to find nothing horrible, just some surface rust. there was some scaling on the inside layer but nothing horrible..looks worse than what it is.

*project 67 sub* · 01-22-2011, 07:58 PM

looking good keep up the good work and you will be their before you know it

67chevy1series · 01-22-2011, 08:00 PM

i have been there done that its no big deal at all like you said it looks worse then it really is

Slick67 · 01-23-2011, 02:37 AM

Hey Kev, the Niftee 50ees will be starting on April 2nd. Normally the first show is the biggest, last year was over 600 rides. That might be a good day for ya to swing by the shop then we'll cruise over to the show. The Sub is lookin good! Those rims came out really good, keep at it bro!

**kev2809** · 01-23-2011, 10:42 AM

hey thanks for stoppin by..

hmm, 3 months away...its gonna be close! i just found out tex mex is in april this year too instead of march, so that gave me another month. but there is a local car show about 2 min from me (literally down the street) that i plan on attending. if it doesnt run then, i can just pull it there. im still in need of at least a trans.. thats the last serious thing i need to at least drive it.

Slick67 · 01-23-2011, 12:00 PM

Quote:

Originally Posted by kev2809

hey thanks for stoppin by..

hmm, 3 months away...its gonna be close! i just found out tex mex is in april this year too instead of march, so that gave me another month. but there is a local car show about 2 min from me (literally down the street) that i plan on attending. if it doesnt run then, i can just pull it there. im still in need of at least a trans.. thats the last serious thing i need to at least drive it.

I wannn do Tex Mex too, but with no exhaust as of now that might be difficult even trailered. I would hate to go and not be able to drive it around a little. Keepin my eyes peeled for a tranny, if somethin comes up I'll give ya a call. You gotta make the Spring show, there will be other forum members there too.

**kev2809** · 01-23-2011, 02:58 PM

ill def. shoot for it!

well, came back from tire shop just now. good news and bad news. first, they didnt have my exact size i needed with a white wall (215/75/15). so i opted for the 215/70/15, not that big of a deal. well, he gets the tire mounted and goes to balancing, they are both a little bent. he still balances it out, and the good news is he says i can still use them for the rear, just not the front. so now im contemplating even using the other 2 and just find 4 more, or still use the ones i have. im taking the other 2 in tomorrow and see if they are bent as well. if they are, then im trashing them. if they are both good, then i might use the set anyways. pics later today of the wheels mounted...

67chevy1series · 01-23-2011, 03:00 PM

cant wait!

**kev2809** · 01-23-2011, 05:03 PM

well, it looks like these rims just wont work. i got everything tightened up, put the wheels on, and the front passenger side wont even make a full turn without rubbing the spindle...sucks

and on a side note, my compressor wont fill my tank from 0 lol. i. i had to fill up my tank with the home compressor, it will put air in when there is already air, but not when its empty...?...its always something.

heres a shot of the rims thats not gonna happen..

67chevy1series · 01-23-2011, 05:07 PM

send them down to me!

that looks awsome to !

**kev2809** · 01-31-2011, 09:05 PM

finally got the damn rims right!!

man it was a hassle...so..close to 6 rims, 2 paint jobs, and numberous trips to the tire place...they should finally be good other than 1 needs to be balanced (second shop didnt do it but sure did charge me)...oh and about 140 in tires (used, but A LOT of tread left), 35 in mounting and new valve stems, and another 20 for a rim i needed...so about 200 bucks in the hole..but i guess its not so bad. i need to clean up the white walls on the tires so i should have some pics up tomorrow. i can finally say..its a roller now! lol. i did plan on doing the rear brakes but i can wait at a later date for that one. anyways..pics tomorrow!

babylonflyer · 02-08-2011, 09:10 PM

what was the end result on tire size?? whats up with the rims being rounded out??6 shooottt...

Quote:

Originally Posted by kev2809

finally got the damn rims right!!

man it was a hassle...so..close to 6 rims, 2 paint jobs, and numberous trips to the tire place...they should finally be good other than 1 needs to be balanced (second shop didnt do it but sure did charge me)...oh and about 140 in tires (used, but A LOT of tread left), 35 in mounting and new valve stems, and another 20 for a rim i needed...so about 200 bucks in the hole..but i guess its not so bad. i need to clean up the white walls on the tires so i should have some pics up tomorrow. i can finally say..its a roller now! lol. i did plan on doing the rear brakes but i can wait at a later date for that one. anyways..pics tomorrow!

oldblue1968chevy · 01-31-2011, 09:30 PM

Gee, I was gonna tell ya wheels are lookin' good! I was reading somewhere that you've gotta grind on the A arm for certain 15" wheels to work with Drop spindes?

I dunno? Have ya got your disc brakesetup done yet? Ive gottan booster mc prop valve brackets linkage etc for sale 71 72 need any of that stuff?

Is the hole in your crossmember safe?? lol It look like a rough cut with air line going through it?!!?

Stay at it!

01-10-2011, 07:25 PM	#1
kev2809 low n' slo Join Date: Mar 2009 Location: rosenberg, texas Posts: 5,172	Re: Project 67 DRGNWGN - 67 Burban!! lol its cool.. heres some pics of the stuff i put together over the weekend. amazing how the elements can make "brand new" look hideous lol i will clean those rotors up with a scuff pad before driving it. also still waiting on the brake lines. i do have to the shocks ready to put in, just need to get new bottom mounts bolts/nuts and the top nuts. these bags give me a lot more clearance so now i wont have to worry about my bag rubbing...peace of mind i guess __________________ 67 1/2 ton Suburban - Project DRGNWGN. Build thread -_--_--_ _________ _--_-_ -/____\|__\|__\__ ,.,,,.,.,,.,\|_O _______ O_] Last edited by kev2809; 01-10-2011 at 07:28 PM.

01-15-2011, 06:17 PM	#2
kev2809 low n' slo Join Date: Mar 2009 Location: rosenberg, texas Posts: 5,172	Re: Project 67 DRGNWGN - 67 Burban!! nothing special, just decided to post of pic of the shocks i used. Monroe pn 5752, from a 50 Chrysler. i did get the passenger side 73 brake line ran, waiting on the adapter fitting for the driver side and the front is pretty much wrapped up other than the brake booster and master cylinder __________________ 67 1/2 ton Suburban - Project DRGNWGN. Build thread -_--_--_ _________ _--_-_ -/____\|__\|__\__ ,.,,,.,.,,.,\|_O _______ O_] Last edited by kev2809; 01-15-2011 at 06:19 PM.

01-16-2011, 02:01 AM	#3
67chevy1series Registered User Join Date: Mar 2010 Location: a t w a t e r cali 95301 Posts: 10,713	Re: Project 67 DRGNWGN - 67 Burban!! hows paint and body comin!!!!!!!!!

01-16-2011, 01:33 PM	#4
kev2809 low n' slo Join Date: Mar 2009 Location: rosenberg, texas Posts: 5,172	Re: Project 67 DRGNWGN - 67 Burban!! lol..i put it on hold for a little bit, the weather has been cold and rainy lately, so i been tryin to wrap up this front suspension so i can get back on it. on a side note, i took the front wheels and had the tires removed so i can strip them down and paint them and get new tires put on. Posted via Mobile Device __________________ 67 1/2 ton Suburban - Project DRGNWGN. Build thread -_--_--_ _________ _--_-_ -/____\|__\|__\__ ,.,,,.,.,,.,\|_O _______ O_]

01-16-2011, 01:51 PM	#5
67chevy1series Registered User Join Date: Mar 2010 Location: a t w a t e r cali 95301 Posts: 10,713	Re: Project 67 DRGNWGN - 67 Burban!! well that is too bad i was lookin forward to seeing that long low and black!!!!!

01-17-2011, 07:56 PM	#6
kev2809 low n' slo Join Date: Mar 2009 Location: rosenberg, texas Posts: 5,172	Re: Project 67 DRGNWGN - 67 Burban!! had a few hours today to get some work in, got the front 2 wheels sanded down with a wire wheel and then used 80 grit to rough it up, shot 3 coats of rustoleum self etching primer on it. wasnt trying to get them down to bare metal, just good enough to get the paint to stick. these rims does have its fair shair dings and scratches, but i think they should look good when they are done. later during the week i should get a few coats of single stage black on, then either this weekend or monday im taking them to get the tires mounted...stay tuned! Before Primed __________________ 67 1/2 ton Suburban - Project DRGNWGN. Build thread -_--_--_ _________ _--_-_ -/____\|__\|__\__ ,.,,,.,.,,.,\|_O _______ O_] Last edited by kev2809; 01-17-2011 at 07:58 PM.

01-22-2011, 02:53 PM	#7
kev2809 low n' slo Join Date: Mar 2009 Location: rosenberg, texas Posts: 5,172	Re: Project 67 DRGNWGN - 67 Burban!! and with 2 coats of valspar high gloss mixed with hardener and some thinner..this stuff is taking forever to dry! i found some areas that got light coated, so ill just go back over those with some rattle can. __________________ 67 1/2 ton Suburban - Project DRGNWGN. Build thread -_--_--_ _________ _--_-_ -/____\|__\|__\__ ,.,,,.,.,,.,\|_O _______ O_]

01-22-2011, 02:58 PM	#8
67chevy1series Registered User Join Date: Mar 2010 Location: a t w a t e r cali 95301 Posts: 10,713	Re: Project 67 DRGNWGN - 67 Burban!! i hope i can do those to my rim when i get them i am going to run those rims in red and a skinny whit line tire with the original 67 dog dishes on mine...... no joke when i looked a the wheel i had to squint my eyes a little bit either i am on here way to much or those are seriously gloss!

01-22-2011, 03:14 PM	#9
kev2809 low n' slo Join Date: Mar 2009 Location: rosenberg, texas Posts: 5,172	Re: Project 67 DRGNWGN - 67 Burban!! lol..i was hoping they would shine a little bit the red would look cool with a white wall tire. im debating on getting NEW tires, or good used ones. they about 70 a piece for a new tire with the thin whitewall..the used are about 80-100 a set. still trying to decide also whether or not to order some baby moon caps.. __________________ 67 1/2 ton Suburban - Project DRGNWGN. Build thread -_--_--_ _________ _--_-_ -/____\|__\|__\__ ,.,,,.,.,,.,\|_O _______ O_]

01-22-2011, 03:20 PM	#10
67chevy1series Registered User Join Date: Mar 2010 Location: a t w a t e r cali 95301 Posts: 10,713	Re: Project 67 DRGNWGN - 67 Burban!! i dont know if moons would look good you should have the photoshop guys work wonders for you so you can get an idea

01-22-2011, 03:33 PM	#11
kev2809 low n' slo Join Date: Mar 2009 Location: rosenberg, texas Posts: 5,172	Re: Project 67 DRGNWGN - 67 Burban!! well the problem im having is the only ones that will fit are 10 inches..the nubs on mine are on the outside of the inner circle. i dont know if moons that big would look good. i dont want to drown out the black paint that much. i wish there some that went on the inside of the inner circle that snapped on.. __________________ 67 1/2 ton Suburban - Project DRGNWGN. Build thread -_--_--_ _________ _--_-_ -/____\|__\|__\__ ,.,,,.,.,,.,\|_O _______ O_]

01-22-2011, 03:39 PM	#12
67chevy1series Registered User Join Date: Mar 2010 Location: a t w a t e r cali 95301 Posts: 10,713	Re: Project 67 DRGNWGN - 67 Burban!! ya i dont think your gonna be able to run moons then

01-22-2011, 07:54 PM	#13
kev2809 low n' slo Join Date: Mar 2009 Location: rosenberg, texas Posts: 5,172	Re: Project 67 DRGNWGN - 67 Burban!! well the paint took about 5 hours to cure to touch, so hopefully the tire shops are open tomorrow and ima go grab a few tires for these and slap em on and then take off the rears. had a few minutes today to get something done while the kids fell asleep. finally got the front window out! felt relieved to find nothing horrible, just some surface rust. there was some scaling on the inside layer but nothing horrible..looks worse than what it is. __________________ 67 1/2 ton Suburban - Project DRGNWGN. Build thread -_--_--_ _________ _--_-_ -/____\|__\|__\__ ,.,,,.,.,,.,\|_O _______ O_]

01-22-2011, 07:58 PM	#14
project 67 sub Account Suspended Join Date: Mar 2007 Location: san bernardino ca. everywhere Posts: 3,938	Re: Project 67 DRGNWGN - 67 Burban!! looking good keep up the good work and you will be their before you know it

01-22-2011, 08:00 PM	#15
67chevy1series Registered User Join Date: Mar 2010 Location: a t w a t e r cali 95301 Posts: 10,713	Re: Project 67 DRGNWGN - 67 Burban!! i have been there done that its no big deal at all like you said it looks worse then it really is



Register or Log In To remove these advertisements.

01-23-2011, 02:37 AM	#16
Slick67 Sofa King Crazy!! Join Date: Oct 2008 Location: Houston, TX Posts: 3,090	Re: Project 67 DRGNWGN - 67 Burban!! Hey Kev, the Niftee 50ees will be starting on April 2nd. Normally the first show is the biggest, last year was over 600 rides. That might be a good day for ya to swing by the shop then we'll cruise over to the show. The Sub is lookin good! Those rims came out really good, keep at it bro! __________________ You found the Tater. *My Blazer Build (New)* - http://67-72chevytrucks.com/vboard/s...d.php?t=654650 *My 67 Build* - http://67-72chevytrucks.com/vboard/s...d.php?t=335650 67 Chevy LWB big window a/c AKA TOTALLED BY A JACKASS. 1972 2wd Blazer "Porterbuilt and Sloshed"

01-23-2011, 10:42 AM	#17
kev2809 low n' slo Join Date: Mar 2009 Location: rosenberg, texas Posts: 5,172	Re: Project 67 DRGNWGN - 67 Burban!! hey thanks for stoppin by.. hmm, 3 months away...its gonna be close! i just found out tex mex is in april this year too instead of march, so that gave me another month. but there is a local car show about 2 min from me (literally down the street) that i plan on attending. if it doesnt run then, i can just pull it there. im still in need of at least a trans.. thats the last serious thing i need to at least drive it. __________________ 67 1/2 ton Suburban - Project DRGNWGN. Build thread -_--_--_ _________ _--_-_ -/____\|__\|__\__ ,.,,,.,.,,.,\|_O _______ O_]

01-23-2011, 02:58 PM	#19
kev2809 low n' slo Join Date: Mar 2009 Location: rosenberg, texas Posts: 5,172	Re: Project 67 DRGNWGN - 67 Burban!! ill def. shoot for it! well, came back from tire shop just now. good news and bad news. first, they didnt have my exact size i needed with a white wall (215/75/15). so i opted for the 215/70/15, not that big of a deal. well, he gets the tire mounted and goes to balancing, they are both a little bent. he still balances it out, and the good news is he says i can still use them for the rear, just not the front. so now im contemplating even using the other 2 and just find 4 more, or still use the ones i have. im taking the other 2 in tomorrow and see if they are bent as well. if they are, then im trashing them. if they are both good, then i might use the set anyways. pics later today of the wheels mounted... __________________ 67 1/2 ton Suburban - Project DRGNWGN. Build thread -_--_--_ _________ _--_-_ -/____\|__\|__\__ ,.,,,.,.,,.,\|_O _______ O_]

01-23-2011, 03:00 PM	#20
67chevy1series Registered User Join Date: Mar 2010 Location: a t w a t e r cali 95301 Posts: 10,713	Re: Project 67 DRGNWGN - 67 Burban!! cant wait!

01-23-2011, 05:03 PM	#21
kev2809 low n' slo Join Date: Mar 2009 Location: rosenberg, texas Posts: 5,172	Re: Project 67 DRGNWGN - 67 Burban!! well, it looks like these rims just wont work. i got everything tightened up, put the wheels on, and the front passenger side wont even make a full turn without rubbing the spindle...sucks and on a side note, my compressor wont fill my tank from 0 lol. i. i had to fill up my tank with the home compressor, it will put air in when there is already air, but not when its empty...?...its always something. heres a shot of the rims thats not gonna happen.. __________________ 67 1/2 ton Suburban - Project DRGNWGN. Build thread -_--_--_ _________ _--_-_ -/____\|__\|__\__ ,.,,,.,.,,.,\|_O _______ O_] Last edited by kev2809; 01-23-2011 at 05:05 PM.

01-23-2011, 05:07 PM	#22
67chevy1series Registered User Join Date: Mar 2010 Location: a t w a t e r cali 95301 Posts: 10,713	Re: Project 67 DRGNWGN - 67 Burban!! send them down to me! that looks awsome to !

01-31-2011, 09:05 PM	#23
kev2809 low n' slo Join Date: Mar 2009 Location: rosenberg, texas Posts: 5,172	Re: Project 67 DRGNWGN - 67 Burban!! finally got the damn rims right!! man it was a hassle...so..close to 6 rims, 2 paint jobs, and numberous trips to the tire place...they should finally be good other than 1 needs to be balanced (second shop didnt do it but sure did charge me)...oh and about 140 in tires (used, but A LOT of tread left), 35 in mounting and new valve stems, and another 20 for a rim i needed...so about 200 bucks in the hole..but i guess its not so bad. i need to clean up the white walls on the tires so i should have some pics up tomorrow. i can finally say..its a roller now! lol. i did plan on doing the rear brakes but i can wait at a later date for that one. anyways..pics tomorrow! __________________ 67 1/2 ton Suburban - Project DRGNWGN. Build thread -_--_--_ _________ _--_-_ -/____\|__\|__\__ ,.,,,.,.,,.,\|_O _______ O_] Last edited by kev2809; 01-31-2011 at 09:05 PM.

01-31-2011, 09:30 PM	#25
oldblue1968chevy Grandpa in the rustmobile... Join Date: Nov 2008 Location: Spokane WA/Viola TN Posts: 11,422	Re: Project 67 DRGNWGN - 67 Burban!! Gee, I was gonna tell ya wheels are lookin' good! I was reading somewhere that you've gotta grind on the A arm for certain 15" wheels to work with Drop spindes? I dunno? Have ya got your disc brakesetup done yet? Ive gottan booster mc prop valve brackets linkage etc for sale 71 72 need any of that stuff? Is the hole in your crossmember safe?? lol It look like a rough cut with air line going through it?!!? Stay at it! __________________ John Goose-1968 C10 355,9.32-1CR, Vortec Heads ,262 voodoo, 3.73:1 3OTT (HS ride/beater/farm truck) http://67-72chevytrucks.com/vboard/s...d.php?t=317684 Grams 53-1953 Chevrolet Belair http://67-72chevytrucks.com/vboard/s...=1#post4327784 1969 Chevy C10 Shortbed 4.5/6?" Frame off resto http://67-72chevytrucks.com/vboard/s...d.php?t=548136 1999 Toyota Tacoma 4x4

Register or Log In To remove these advertisements.