How about some pics of Static dropped 60-66 - Page 12 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**MisterC** · 11-29-2012, 10:58 PM

Hey Polaris,

The "rule of thumb" is anything over 4 inches should be notched. I'll post up a couple of pictures soon, but I just completed a 4 inch coil drop and my spacing is fine. However, if I were to go any lower, I'd definitely notch the frame.

polarisman340 · 11-30-2012, 06:56 PM

Thanks for the replies, that pretty much answered my question. Since I'm gonna have the box off it over the winter, I'm thinkin it'd be a smart time to go ahead with the notches. Thanks again!!!

**DURG** · 12-01-2012, 02:56 PM

This is at 5-1/2" in the front and 6-1/2" in the rear as measured from the floor to underside of main frame rails directly below front and rear cab mounts.

txinliner · 06-07-2014, 01:54 PM

Quote:

Originally Posted by MisterC

Hey Polaris,

The "rule of thumb" is anything over 4 inches should be notched. I'll post up a couple of pictures soon, but I just completed a 4 inch coil drop and my spacing is fine. However, if I were to go any lower, I'd definitely notch the frame.

agree completely mine is a 7 / 6-1/2 drop gonna c notch in a couple of weeks

66redw/white · 12-01-2012, 09:26 PM

that is so bad ass lookin. love it

glos55 · 12-02-2012, 08:45 AM

Its bad a$$ alright!!! I love it too!!!

HouldenCaulfield · 12-02-2012, 10:17 PM

DURG? What size tires are you running?

**DURG** · 12-02-2012, 10:31 PM

Quote:

Originally Posted by HouldenCaulfield

DURG? What size tires are you running?

265-40-22 and 245-40-20 Nitto NT555 Extreme ZR

Pablo22 · 12-06-2012, 11:27 PM

CPP 4/5 kit.

WTexChevy · 12-23-2012, 10:49 AM

1 coil cut from front.

steve'62 · 12-23-2012, 10:54 AM

Durg, lookin awesome, would love to see it all together!!
Posted via Mobile Device

66-PMD-GMC · 12-24-2012, 01:19 AM

I have gone through this thread and see a lot of cool trucks.
There is a lot of hard work showing in those photos. Nice job guys.
What I am wondering is where are the photos of the suspensions?
I am specifically looking to find information on coil over front and rear static suspensions.
I was going to do air springs but can't find a system that has a single set ride height as I do not want to have a variable system.
So I was thinking a static coil over system would be best for what I am doing.
Does anyone know if there is anything available on static coil over suspensions and if so where?

65shortbox · 12-24-2012, 01:34 AM

Durg's is static drop ridetech coil over. Check his thread, GREAT work on his truck.
Posted via Mobile Device

66-PMD-GMC · 12-24-2012, 01:44 AM

So where is his build thread?

**DURG** · 12-25-2012, 02:27 AM

Quote:

Originally Posted by 66-PMD-GMC

So where is his build thread?

Right in the 60-66 project section.

66-PMD-GMC · 12-24-2012, 01:58 AM

I found this thread.. cool static rear suspension
http://67-72chevytrucks.com/vboard/s...d.php?t=550139

70*cst · 12-26-2012, 09:00 PM

I'm gonna try.[IMG]pc130043[/IMG]

70*cst · 12-26-2012, 09:02 PM

Nope, guess I'll have to try something else!

HouldenCaulfield · 12-30-2012, 09:53 PM

LDO, looks great! What is your wheel/tire combo?
Posted via Mobile Device

LDO · 12-30-2012, 10:03 PM

17x7 on 225/60-17s in the front, 18x8 on 255/55-18s in the rear.

I love the look and it actually rides pretty good.

steve'62 · 12-30-2012, 11:36 PM

LDO, looks effing sick!luv it

GMC66 · 12-31-2012, 10:08 AM

Nice truck LDO!

LDO · 12-31-2012, 10:26 AM

Thanks everyone. Gotta re do the front suspension and it has been a pain figuring what parts to use but this forum and its members have been a big help.
Posted via Mobile Device

Red65C10 · 12-31-2012, 11:16 AM

Very Nice

peltjd · 01-05-2013, 03:52 PM

My 1965 C10 static dropped. 2 coils off the front. 4" blocks and 1 coil off the rear. About to be bagged in a couple of months. Stuff is in the mail.

11-29-2012, 10:58 PM	#1
MisterC Senior Member Join Date: Sep 2011 Location: Hanford, CA Posts: 1,027	Re: How about some pics of Static dropped 60-66 Hey Polaris, The "rule of thumb" is anything over 4 inches should be notched. I'll post up a couple of pictures soon, but I just completed a 4 inch coil drop and my spacing is fine. However, if I were to go any lower, I'd definitely notch the frame. __________________ Poor and content is Rich...and Rich enough! - William Shakespeare 1966 C10 Custom Cab "Luigi" Big Window - SWB Fleetside 350 V-8 - Powerglide My not so much a build thread as a "Slow Progression Thread":http://67-72chevytrucks.com/vboard/s...d.php?t=486894

11-30-2012, 06:56 PM	#2
polarisman340 Registered User Join Date: Oct 2012 Location: Slinger, WI Posts: 10	Re: How about some pics of Static dropped 60-66 Thanks for the replies, that pretty much answered my question. Since I'm gonna have the box off it over the winter, I'm thinkin it'd be a smart time to go ahead with the notches. Thanks again!!!

12-01-2012, 02:56 PM	#3
DURG Registered User Join Date: May 2012 Location: Scarborough ME. Posts: 413	Re: How about some pics of Static dropped 60-66 This is at 5-1/2" in the front and 6-1/2" in the rear as measured from the floor to underside of main frame rails directly below front and rear cab mounts. __________________ 1962 Impala SS 383 stroker Tremec TKO 600 Black 1965 SWB BBW Fleetside Custom Cab PB Coilover setup Black 2003 100th Anniversary Road King Classic Silver Black

12-01-2012, 09:26 PM	#5
66redw/white made in america Join Date: May 2010 Location: baton rouge la Posts: 653	Re: How about some pics of Static dropped 60-66 that is so bad ass lookin. love it __________________ 2005 gmc sierra- 4/6, t56, cammed 5.3. 4.10, big bars, and brakes. sounds good 1964 c10-283 powerpack, 3 on the tree 2004 corvette- lowered, borla, tuned. slow my old girl 1966 c10- 305v8, t-5 sold

12-02-2012, 08:45 AM	#6
glos55 Registered User Join Date: Nov 2010 Location: Kalamazoo, MI Posts: 1,008	Re: How about some pics of Static dropped 60-66 Its bad a$$ alright!!! I love it too!!! __________________ LIFE IS SHORT HAVE FUN

12-02-2012, 10:17 PM	#7
HouldenCaulfield Registered User Join Date: Oct 2012 Location: Tulsa, OK Posts: 108	Re: How about some pics of Static dropped 60-66 DURG? What size tires are you running?

12-06-2012, 11:27 PM	#9
Pablo22 Registered User Join Date: Jun 2012 Location: Riverside, CA Posts: 34	Re: How about some pics of Static dropped 60-66 CPP 4/5 kit. Attached Images

12-23-2012, 10:49 AM	#10
WTexChevy Registered User Join Date: May 2011 Location: Lubbock, TX Posts: 95	Re: How about some pics of Static dropped 60-66 1 coil cut from front.

12-23-2012, 10:54 AM	#11
steve'62 Registered User Join Date: Feb 2011 Location: Goodyear,az Posts: 251	Re: How about some pics of Static dropped 60-66 Durg, lookin awesome, would love to see it all together!! Posted via Mobile Device

12-24-2012, 01:19 AM	#12
66-PMD-GMC The 60-66 GMC/Pontiac guy.... Join Date: Oct 2010 Location: Apache Junction, Arizona Posts: 1,306	Re: How about some pics of Static dropped 60-66 I have gone through this thread and see a lot of cool trucks. There is a lot of hard work showing in those photos. Nice job guys. What I am wondering is where are the photos of the suspensions? I am specifically looking to find information on coil over front and rear static suspensions. I was going to do air springs but can't find a system that has a single set ride height as I do not want to have a variable system. So I was thinking a static coil over system would be best for what I am doing. Does anyone know if there is anything available on static coil over suspensions and if so where? __________________ Building Genuine Pontiac Firepowered cars and trucks for several decades. Why Pontiac?? That's just me daring to be different. Projects.. 63 C10 Short Wheel Base fleetside (The Pro-Street) currently under reconstruction. 440CID 2X4 Pontiac

12-24-2012, 01:34 AM	#13
65shortbox Registered User Join Date: Oct 2008 Location: Los Angeles Posts: 39	Re: How about some pics of Static dropped 60-66 Durg's is static drop ridetech coil over. Check his thread, GREAT work on his truck. Posted via Mobile Device

12-24-2012, 01:44 AM	#14
66-PMD-GMC The 60-66 GMC/Pontiac guy.... Join Date: Oct 2010 Location: Apache Junction, Arizona Posts: 1,306	Re: How about some pics of Static dropped 60-66 So where is his build thread? __________________ Building Genuine Pontiac Firepowered cars and trucks for several decades. Why Pontiac?? That's just me daring to be different. Projects.. 63 C10 Short Wheel Base fleetside (The Pro-Street) currently under reconstruction. 440CID 2X4 Pontiac

12-24-2012, 01:58 AM	#16
66-PMD-GMC The 60-66 GMC/Pontiac guy.... Join Date: Oct 2010 Location: Apache Junction, Arizona Posts: 1,306	Re: How about some pics of Static dropped 60-66 I found this thread.. cool static rear suspension http://67-72chevytrucks.com/vboard/s...d.php?t=550139 __________________ Building Genuine Pontiac Firepowered cars and trucks for several decades. Why Pontiac?? That's just me daring to be different. Projects.. 63 C10 Short Wheel Base fleetside (The Pro-Street) currently under reconstruction. 440CID 2X4 Pontiac

12-26-2012, 09:00 PM	#17
70*cst Registered User Join Date: Jul 2010 Location: strunk, ky Posts: 3	Re: How about some pics of Static dropped 60-66 I'm gonna try.[IMG]pc130043[/IMG]

12-26-2012, 09:02 PM	#18
70*cst Registered User Join Date: Jul 2010 Location: strunk, ky Posts: 3	Re: How about some pics of Static dropped 60-66 Nope, guess I'll have to try something else! Last edited by 70cst; 12-26-2012 at 09:22 PM. Reason: no pic*



Register or Log In To remove these advertisements.

12-30-2012, 09:53 PM	#19
HouldenCaulfield Registered User Join Date: Oct 2012 Location: Tulsa, OK Posts: 108	Re: How about some pics of Static dropped 60-66 LDO, looks great! What is your wheel/tire combo? Posted via Mobile Device

12-30-2012, 10:03 PM	#20
LDO Registered User Join Date: Feb 2011 Location: Senatobia, MS Posts: 1,294	Re: How about some pics of Static dropped 60-66 17x7 on 225/60-17s in the front, 18x8 on 255/55-18s in the rear. I love the look and it actually rides pretty good. __________________ Once a Marine, always a Marine! My (Her) 57 Build "Beverly" My 66 Build "Betty" My 85 C10 "Old Blue" Help Me Find "Old Blue" OLD BLUE PART II

12-30-2012, 11:36 PM	#21
steve'62 Registered User Join Date: Feb 2011 Location: Goodyear,az Posts: 251	Re: How about some pics of Static dropped 60-66 LDO, looks effing sick!luv it

12-31-2012, 10:08 AM	#22
GMC66 Registered User Join Date: Jun 2012 Location: Science Hill, Kentucky Posts: 180	Re: How about some pics of Static dropped 60-66 Nice truck LDO!

12-31-2012, 10:26 AM	#23
LDO Registered User Join Date: Feb 2011 Location: Senatobia, MS Posts: 1,294	Re: How about some pics of Static dropped 60-66 Thanks everyone. Gotta re do the front suspension and it has been a pain figuring what parts to use but this forum and its members have been a big help. Posted via Mobile Device __________________ Once a Marine, always a Marine! My (Her) 57 Build "Beverly" My 66 Build "Betty" My 85 C10 "Old Blue" Help Me Find "Old Blue" OLD BLUE PART II

12-31-2012, 11:16 AM	#24
Red65C10 Registered User Join Date: Mar 2011 Location: Cumming GA Posts: 202	Re: How about some pics of Static dropped 60-66 Very Nice __________________ Billy 65 C10 ............................... ____ ................ ________-\|___\____ .;.;;.:;:;.,;.\|__(O)___\|____/_(O)\| _______________________________ P.S. Send truck money !

01-05-2013, 03:52 PM	#25
peltjd Registered User Join Date: Oct 2012 Location: Kennesaw Ga Posts: 28	Re: How about some pics of Static dropped 60-66 My 1965 C10 static dropped. 2 coils off the front. 4" blocks and 1 coil off the rear. About to be bagged in a couple of months. Stuff is in the mail. Attached Images

Register or Log In To remove these advertisements.