My 70 2wd Project begins! - Page 12 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

VA72C10 · 02-08-2010, 09:39 PM

Looking good. So you're wrapping the dash in leather also?

snoopy · 02-08-2010, 10:53 PM

Adam, did you ever find the bed caps for the black blazer I got from you?

OARNGESI · 02-09-2010, 04:46 AM

Nice wered you get the caps do you got a piece for the tailgate too

atp · 02-16-2010, 04:11 PM

Finishing up some odd and ends today - thought I would post some pics. Tank is installed and Fliter/Reg is in. New Oil Pressure sending unit is install with Autometer Adapter.

Hope to finish a few more today and get this thing cranked soon!

atp · 02-16-2010, 09:03 PM

Clearance issue #...

Not sure if LS coil pack brackets are different but this inlet hits the coil!

mike nutt · 02-16-2010, 11:09 PM

adam ,

here's a picture for you.

looking good!!!!!!!

68 short step · 02-17-2010, 06:37 PM

the LS1 coil brackets tilt the coil forward at a angle.....what you can do is either get the correct coil bracket, or using a 3/8 tube bender tool, slightly bend it up/back enough to clear the coil...i forgot about that clearence problem when switching to a car intake...
mike nutt, could you give details to what you've done? i see you have a AN ftng off the FPR, are those stock rails?

atp · 02-19-2010, 07:32 PM

Problem solved! Thanks Mike.

I was also able to get the gas pedal in. Cool thing about this one is it is from a truck with adjustable pedals. I was able to remove the cable that adjusted it and it can be adjusted with a screwdriver. It can move back or forward an inch or so.

Im getting closer to cranking this thing!

mcbassin · 02-19-2010, 11:34 PM

Looking good! Keep it up!

VA72C10 · 02-20-2010, 12:13 AM

Nice progress. So how much does the asking price jump when it runs for the first time

atp · 02-22-2010, 10:26 PM

Quote:

Originally Posted by VA72C10

Nice progress. So how much does the asking price jump when it runs for the first time

Not too much - just hope it helps it sell!

atp · 02-24-2010, 09:48 AM

Stuck the carpet in temporarily to see how far it would go up on the firewall and check a few clearances. Color actually matches really well to not be a true custom cut carpet. I did go with the newer looking pile verses the older loop style.

meathead95 · 02-25-2010, 10:00 PM

I have a buddy interested in your blazer. what is the asking price?

atp · 02-27-2010, 08:56 PM

Made some more progress today. Mostly just finished up some odd and ends.

I was able to finish the filler neck - turned out pretty good.

I taped up a few wires and tightened up the started so I could install the the header for the last time.

I painted the support bar we added to gain a little more clearance for the rearend housing. I painted it with the upol raptor liner to match the underside. You won't see it from the top.

Also finished mounting the air compressor, tanks, finished wiring the all the air ride components and tidy up some existing wiring (not pic'd)

The the last pic is a warning - While vigorously shaking the upol can per the directions - the top might bust and throw stuff everywhere. I was very lucky it was only my hand, shirt and floor - it was inches from being all over the Blazer!

**Hart_Rod** · 02-27-2010, 09:00 PM

Looks good! You'll be riding in no time...

.

mcbassin · 02-28-2010, 10:12 PM

Nice looking hand paint job! good progress too!

atp · 03-05-2010, 08:59 PM

Little more progress - I should be able to start this thing REAL soon!!

Tranny cooler and lines - done
Tranny dipstick and oil dipstick - done

atp · 03-20-2010, 09:35 AM

Get them started early!

New headlights ready for install.

And I decided to upgrade the front shock waves to the new version with the built in height sensor. I didn't like the way the external sensor was going to look on the front suspension.

68 short step · 03-20-2010, 02:06 PM

looks really good, good call on the front shockwaves....whats your boy putting together, those arnt the 16" rotors are they?

atp · 03-22-2010, 01:20 PM

Quote:

Originally Posted by 68 short step

looks really good, good call on the front shockwaves....whats your boy putting together, those arnt the 16" rotors are they?

I wish they were that big! A little rear brake bling...

atp · 03-23-2010, 07:43 PM

22's with clearance!!

Sure makes those big brakes look little...

kvn1011 · 03-23-2010, 10:31 PM

LQQkin Good!

VA72C10 · 03-23-2010, 10:48 PM

Nice!

love my 72 · 03-24-2010, 11:17 AM

O boy!!!!!!, cant wait to see it sitting on those wheels!!!!

atp · 06-02-2010, 11:02 AM

Finally got around to working on the Blazer today. My son was born on April 28 and has been in the ICU since so priorities have shifted a little. Sorry about the quality of the pics my wife has the good camera today. Hope to roll it out for better pics as soon as the sun stays out for more than an hour!!

02-08-2010, 09:39 PM	#276
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,269	Re: My 70 2wd Project begins! Looking good. So you're wrapping the dash in leather also? __________________ Looking for a 67-72 swb or blazer project in or around VA.

02-08-2010, 10:53 PM	#277
snoopy Registered User Join Date: Jun 2009 Location: Goose Creek, South Carolina Posts: 219	Re: My 70 2wd Project begins! Adam, did you ever find the bed caps for the black blazer I got from you?

02-09-2010, 04:46 AM	#278
OARNGESI Registered User Join Date: Sep 2008 Location: CASA GRANDE AZ Posts: 4,276	Re: My 70 2wd Project begins! Nice wered you get the caps do you got a piece for the tailgate too __________________ 70 SWB STEPSIDE 70 BLAZER 09 challenger

02-16-2010, 04:11 PM	#279
atp Registered User Join Date: Apr 2007 Location: Inman, SC Posts: 1,108	Re: My 70 2wd Project begins! Finishing up some odd and ends today - thought I would post some pics. Tank is installed and Fliter/Reg is in. New Oil Pressure sending unit is install with Autometer Adapter. Hope to finish a few more today and get this thing cranked soon! Attached Images

02-16-2010, 09:03 PM	#280
atp Registered User Join Date: Apr 2007 Location: Inman, SC Posts: 1,108	Re: My 70 2wd Project begins! Clearance issue #... Not sure if LS coil pack brackets are different but this inlet hits the coil! Attached Images

02-16-2010, 11:09 PM	#281
mike nutt 69fatmotor Join Date: Oct 2005 Location: bama Posts: 660	Re: My 70 2wd Project begins! adam , here's a picture for you. looking good!!!!!!! Attached Images Last edited by mike nutt; 02-16-2010 at 11:11 PM.

02-17-2010, 06:37 PM	#282
68 short step Senior Member Join Date: Aug 2005 Location: tulsa OK Posts: 3,070	Re: My 70 2wd Project begins! the LS1 coil brackets tilt the coil forward at a angle.....what you can do is either get the correct coil bracket, or using a 3/8 tube bender tool, slightly bend it up/back enough to clear the coil...i forgot about that clearence problem when switching to a car intake... mike nutt, could you give details to what you've done? i see you have a AN ftng off the FPR, are those stock rails?

02-19-2010, 07:32 PM	#283
atp Registered User Join Date: Apr 2007 Location: Inman, SC Posts: 1,108	Re: My 70 2wd Project begins! Problem solved! Thanks Mike. I was also able to get the gas pedal in. Cool thing about this one is it is from a truck with adjustable pedals. I was able to remove the cable that adjusted it and it can be adjusted with a screwdriver. It can move back or forward an inch or so. Im getting closer to cranking this thing! Attached Images

02-19-2010, 11:34 PM	#284
mcbassin Still Learning Join Date: Jul 2009 Location: Central Oklahoma Posts: 10,108	Re: My 70 2wd Project begins! Looking good! Keep it up! __________________ Mike "69 Short Wide" My Project 86 Silverado Landen's Project Instagram: @mcbassin My Website C/10 Club Oklahoma Facebook Group

02-20-2010, 12:13 AM	#285
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,269	Re: My 70 2wd Project begins! Nice progress. So how much does the asking price jump when it runs for the first time __________________ Looking for a 67-72 swb or blazer project in or around VA.

02-24-2010, 09:48 AM	#287
atp Registered User Join Date: Apr 2007 Location: Inman, SC Posts: 1,108	Re: My 70 2wd Project begins! Stuck the carpet in temporarily to see how far it would go up on the firewall and check a few clearances. Color actually matches really well to not be a true custom cut carpet. I did go with the newer looking pile verses the older loop style. Attached Images

02-25-2010, 10:00 PM	#288
meathead95 computer illiterate Join Date: Jan 2001 Location: Des Moines, IA Posts: 6,446	Re: My 70 2wd Project begins! I have a buddy interested in your blazer. what is the asking price? __________________ 72 2wd blazer 72 swb 4x4

02-27-2010, 08:56 PM	#289
atp Registered User Join Date: Apr 2007 Location: Inman, SC Posts: 1,108	Re: My 70 2wd Project begins! Made some more progress today. Mostly just finished up some odd and ends. I was able to finish the filler neck - turned out pretty good. I taped up a few wires and tightened up the started so I could install the the header for the last time. I painted the support bar we added to gain a little more clearance for the rearend housing. I painted it with the upol raptor liner to match the underside. You won't see it from the top. Also finished mounting the air compressor, tanks, finished wiring the all the air ride components and tidy up some existing wiring (not pic'd) The the last pic is a warning - While vigorously shaking the upol can per the directions - the top might bust and throw stuff everywhere. I was very lucky it was only my hand, shirt and floor - it was inches from being all over the Blazer! Attached Images

02-27-2010, 09:00 PM	#290
Hart_Rod ************* Join Date: Apr 2005 Location: Pensacola, FL Posts: 17,846	Re: My 70 2wd Project begins! Looks good! You'll be riding in no time.... __________________ Rob - https://www.instagram.com/hart_rod_c10 As Iron Sharpens Iron, So One Man Sharpens Another. Proverbs 27:17 FOR SALE: DBW pedal bracket - http://67-72chevytrucks.com/vboard/s...d.php?t=651123 FOR SALE: Hood Brackets http://67-72chevytrucks.com/vboard/s...d.php?t=679945 1987 Silverado SWB - 34.5K original miles http://67-72chevytrucks.com/vboard/s...d.php?t=801834 1969 SuperBurb - http://67-72chevytrucks.com/vboard/s...d.php?t=200387 1968 Farm truck - http://67-72chevytrucks.com/vboard/s...d.php?t=358692 1968 SWB - http://67-72chevytrucks.com/vboard/s...d.php?t=551258 1948 Chevy - http://67-72chevytrucks.com/vboard/s...=122164&page=3

02-28-2010, 10:12 PM	#291
mcbassin Still Learning Join Date: Jul 2009 Location: Central Oklahoma Posts: 10,108	Re: My 70 2wd Project begins! Nice looking hand paint job! good progress too! __________________ Mike "69 Short Wide" My Project 86 Silverado Landen's Project Instagram: @mcbassin My Website C/10 Club Oklahoma Facebook Group



Register or Log In To remove these advertisements.

03-05-2010, 08:59 PM	#292
atp Registered User Join Date: Apr 2007 Location: Inman, SC Posts: 1,108	Re: My 70 2wd Project begins! Little more progress - I should be able to start this thing REAL soon!! Tranny cooler and lines - done Tranny dipstick and oil dipstick - done Attached Images

03-20-2010, 09:35 AM	#293
atp Registered User Join Date: Apr 2007 Location: Inman, SC Posts: 1,108	Re: My 70 2wd Project begins! Get them started early! New headlights ready for install. And I decided to upgrade the front shock waves to the new version with the built in height sensor. I didn't like the way the external sensor was going to look on the front suspension. Attached Images

03-20-2010, 02:06 PM	#294
68 short step Senior Member Join Date: Aug 2005 Location: tulsa OK Posts: 3,070	Re: My 70 2wd Project begins! looks really good, good call on the front shockwaves....whats your boy putting together, those arnt the 16" rotors are they?

03-23-2010, 07:43 PM	#296
atp Registered User Join Date: Apr 2007 Location: Inman, SC Posts: 1,108	Re: My 70 2wd Project begins! 22's with clearance!! Sure makes those big brakes look little... Attached Images

03-23-2010, 10:31 PM	#297
kvn1011 Kvn1011 Join Date: May 2009 Location: kankakee il Posts: 560	Re: My 70 2wd Project begins! LQQkin Good!

03-23-2010, 10:48 PM	#298
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,269	Re: My 70 2wd Project begins! Nice! __________________ Looking for a 67-72 swb or blazer project in or around VA.

03-24-2010, 11:17 AM	#299
love my 72 Registered User Join Date: Jul 2000 Location: East Bay,CA Posts: 298	Re: My 70 2wd Project begins! O boy!!!!!!, cant wait to see it sitting on those wheels!!!! __________________ 51 Chevy 3100 Deluxe Cab(SOLD) 65 **stang 6cyl 70 C10 Long Bed Fleetside(1st truck,thanks Dad![SOLD]) 72 C10 Short Bed Fleetside 73 Blazer 2WD Catalina Blue White Top(Needs Love) 73 Blazer 2WD Work in progress LT1/4L60E 83 Grand National (SOLD) 94 Blazer K1500 Silverado (SOLD) 96 Impala SS All original (NEXT IN LINE 2 B SOLD) 99 Tahoe 2DR, 2WD

06-02-2010, 11:02 AM	#300
atp Registered User Join Date: Apr 2007 Location: Inman, SC Posts: 1,108	Re: My 70 2wd Project begins! Finally got around to working on the Blazer today. My son was born on April 28 and has been in the ICU since so priorities have shifted a little. Sorry about the quality of the pics my wife has the good camera today. Hope to roll it out for better pics as soon as the sun stays out for more than an hour!! Attached Images

Register or Log In To remove these advertisements.