Project Patina Burb - Page 12 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

5150 · 08-23-2013, 02:25 AM

I'm using the early 90's truck ones. The mount sits higher on the inside. I've got some tubing that I'm using to flatten them out and reinforcing them also. I'll take a pic this weekend and show you.
Posted via Mobile Device

5150 · 08-24-2013, 03:08 PM

My buddy Brian came over today and we knocked out the welding that needed to be done.

Posted via Mobile Device

BrianV · 08-24-2013, 07:05 PM

Lookin sweet man keep up the goodwork

5150 · 08-29-2013, 01:24 PM

Got my Lokar Transmission linkage adapter in today. It'll be nice to put it in gear correctly.

5150 · 09-01-2013, 06:54 PM

I was trying to get my mud work done this weekend since I was off, but all of my local buddies were out of town for Labor Day. Spent a few hours on the burb anyway yesterday. Got the Lokar shift linkage adapter installed and measured and drilled for the 67 mirror and round mirror heads. Also, I bought a ceiling console from pullapart out of a late model S10 Blazer. I got it mounted, but not sure how to get it wired yet.

Sorry for the crappy pics

5150 · 09-01-2013, 09:15 PM

Just went out and worked on installing the hatch. I've decided not to try and cut out and put the original lock and key. Instead I'm going to install a cable to open it. It went on great and shuts great.

cubber · 09-01-2013, 10:09 PM

Looks good, Bryan. I am ready to see some patina! I did mine all by hand, the thought of doing a Suburban makes my shoulder ache!! lol

BrianV · 09-02-2013, 12:20 AM

Lookin awesome Bryan keep up the good work

Rusbuilt · 09-02-2013, 01:36 AM

Nice work buddy
Posted via Mobile Device

**Todd68Chevy** · 09-10-2013, 09:26 PM

Bryan, I would like for you to check out your 67 hub caps that you got from Rus. When I went thru them and sold him a set, I did not realize that I have 2 styles. Out of the 4 that I kept, there is 3 of one style and 1 of another style. Check out the bowtie in the center and make sure they are all the same. I have one that the bowtie is raised up and 3 that the are level. It is hard to see in the picture but the 1st picture and the cap on the right in the last picture is the one that is raised and the 2nd picture and the left one in the last picture is the one that is level. I really do not want you to get these painted and then find out you have 2 different ones. Let me know what you find out. Thanks.

5150 · 09-12-2013, 04:13 PM

Todd, one of them is different.

My buddy, Brian, painted my 71 plate for me. It looks great.

Posted via Mobile Device

5150 · 09-12-2013, 04:16 PM

Body work is all done. I need to sand it down and I'll be ready for paint.

Posted via Mobile Device

**Todd68Chevy** · 09-12-2013, 05:04 PM

Quote:

Originally Posted by 5150

Todd, one of them is different.

Which one is the odd one like? Does it have the raised bowtie or the flush?

Rusbuilt · 09-12-2013, 06:16 PM

Nice work Bryan!!

5150 · 09-17-2013, 09:02 AM

Sanded it down yesterday and I'm ready for paint. I'm going to try to knock it out on the 28th. That's the next day that I'm off. I ordered my stuff yesterday to make it look patina, just need to go grab the paint.

5150 · 09-20-2013, 10:20 AM

About to start painting the white on top today.

Also, found another member on the board that it attempting to do what I REALLY want to do instead of using 15 inch steelies with the 67 caps. He's using the Mobsteel wheels with the 67 caps. This is a pic of the 18's, but I'll use the 20's.

**Todd68Chevy** · 09-20-2013, 10:49 AM

Quote:

Originally Posted by 5150

About to start painting the white on top today.

Also, found another member on the board that it attempting to do what I REALLY want to do instead of using 15 inch steelies with the 67 caps. He's using the Mobsteel wheels with the 67 caps. This is a pic of the 18's, but I'll use the 20's.

Joe is always modifying something and does and excellent job doing it. He was telling me at a show a couple weeks ago about his wheels and hub caps. It is because of him that I found out my center cap do not match. Let me know what your odd cap is like and I will see if we can get it corrected.

5150 · 09-28-2013, 07:02 PM

Started painting on the burb today. It's Blue!!

Posted via Mobile Device

CG · 09-28-2013, 07:18 PM

Lookin good ... are the kids bugging you for a ride yet?

Rusbuilt · 09-28-2013, 07:21 PM

Looks good bryan!!

5150 · 09-28-2013, 07:40 PM

Quote:

Originally Posted by CG

Lookin good ... are the kids bugging you for a ride yet?

Not yet, but they loved to sit in the seats and bounce around when I was mocking them up.

Russ, did you say you mixed the Iron B in the paint? Or brushed it on afterward? I forget.
Posted via Mobile Device

Rusbuilt · 09-28-2013, 07:55 PM

I thinned it down and put it in a spray bottle. Then I sprayed it on.

5150 · 09-28-2013, 09:05 PM

What did you thin it down with?
Posted via Mobile Device

cubber · 09-29-2013, 02:17 PM

WOW!! Looks great, Bryan. I like the blue.

5150 · 09-29-2013, 04:28 PM

Thanks Matt, I really like it. Not too light, not too dark, and not too royal.
Posted via Mobile Device

08-23-2013, 02:25 AM	#276
5150 C10 Club Tennessee Join Date: Mar 2003 Location: White House, TN 37188 Posts: 8,281	Re: Project Patina Burb I'm using the early 90's truck ones. The mount sits higher on the inside. I've got some tubing that I'm using to flatten them out and reinforcing them also. I'll take a pic this weekend and show you. Posted via Mobile Device __________________ Bryan www.gmtruckshow.com Project "Andes"-Halen's First Truck Project: Patina Burb for he is God’s servant for your good. But if you do wrong, be afraid, for he does not bear the sword in vain. For he is the servant of God, an avenger who carries out God’s wrath on the wrongdoer. Romans 13:4

08-24-2013, 03:08 PM	#277
5150 C10 Club Tennessee Join Date: Mar 2003 Location: White House, TN 37188 Posts: 8,281	Re: Project Patina Burb My buddy Brian came over today and we knocked out the welding that needed to be done. Posted via Mobile Device __________________ Bryan www.gmtruckshow.com Project "Andes"-Halen's First Truck Project: Patina Burb for he is God’s servant for your good. But if you do wrong, be afraid, for he does not bear the sword in vain. For he is the servant of God, an avenger who carries out God’s wrath on the wrongdoer. Romans 13:4

08-24-2013, 07:05 PM	#278
BrianV Registered User Join Date: Mar 2010 Location: Mesa, Az Posts: 364	Re: Project Patina Burb Lookin sweet man keep up the goodwork

08-29-2013, 01:24 PM	#279
5150 C10 Club Tennessee Join Date: Mar 2003 Location: White House, TN 37188 Posts: 8,281	Re: Project Patina Burb Got my Lokar Transmission linkage adapter in today. It'll be nice to put it in gear correctly. __________________ Bryan www.gmtruckshow.com Project "Andes"-Halen's First Truck Project: Patina Burb for he is God’s servant for your good. But if you do wrong, be afraid, for he does not bear the sword in vain. For he is the servant of God, an avenger who carries out God’s wrath on the wrongdoer. Romans 13:4

09-01-2013, 06:54 PM	#280
5150 C10 Club Tennessee Join Date: Mar 2003 Location: White House, TN 37188 Posts: 8,281	Re: Project Patina Burb I was trying to get my mud work done this weekend since I was off, but all of my local buddies were out of town for Labor Day. Spent a few hours on the burb anyway yesterday. Got the Lokar shift linkage adapter installed and measured and drilled for the 67 mirror and round mirror heads. Also, I bought a ceiling console from pullapart out of a late model S10 Blazer. I got it mounted, but not sure how to get it wired yet. Sorry for the crappy pics __________________ Bryan www.gmtruckshow.com Project "Andes"-Halen's First Truck Project: Patina Burb for he is God’s servant for your good. But if you do wrong, be afraid, for he does not bear the sword in vain. For he is the servant of God, an avenger who carries out God’s wrath on the wrongdoer. Romans 13:4

09-01-2013, 09:15 PM	#281
5150 C10 Club Tennessee Join Date: Mar 2003 Location: White House, TN 37188 Posts: 8,281	Re: Project Patina Burb Just went out and worked on installing the hatch. I've decided not to try and cut out and put the original lock and key. Instead I'm going to install a cable to open it. It went on great and shuts great. __________________ Bryan www.gmtruckshow.com Project "Andes"-Halen's First Truck Project: Patina Burb for he is God’s servant for your good. But if you do wrong, be afraid, for he does not bear the sword in vain. For he is the servant of God, an avenger who carries out God’s wrath on the wrongdoer. Romans 13:4 Last edited by 5150; 09-01-2013 at 09:38 PM.

09-01-2013, 10:09 PM	#282
cubber Registered User Join Date: Mar 2012 Location: Leanna, TN Posts: 2,061	Re: Project Patina Burb Looks good, Bryan. I am ready to see some patina! I did mine all by hand, the thought of doing a Suburban makes my shoulder ache!! lol __________________ =MATTHEW 69 Stepper...Stroked & Bagged GONE BUT NOT FORGOTTEN 2003 Chevrolet Z71 Ext. Cab 1995 Cavalier gas saver!

09-02-2013, 12:20 AM	#283
BrianV Registered User Join Date: Mar 2010 Location: Mesa, Az Posts: 364	Re: Project Patina Burb Lookin awesome Bryan keep up the good work

09-02-2013, 01:36 AM	#284
Rusbuilt Registered User Join Date: Mar 2012 Location: Knoxville, TN Posts: 5,381	Re: Project Patina Burb Nice work buddy Posted via Mobile Device __________________ -Rus PLEASE HELP WITH PROJECT UNDERHAULINPaypal donations accepted @ rus1785@yahoo.com Rusbuilt's garage 1968 Chevy C-30 Darcy SOLD Rusbuilt shop truck *SOLD*

09-10-2013, 09:26 PM	#285
Todd68Chevy Senior Member Join Date: Oct 2009 Location: Shelburn Indiana Posts: 3,977	Re: Project Patina Burb Bryan, I would like for you to check out your 67 hub caps that you got from Rus. When I went thru them and sold him a set, I did not realize that I have 2 styles. Out of the 4 that I kept, there is 3 of one style and 1 of another style. Check out the bowtie in the center and make sure they are all the same. I have one that the bowtie is raised up and 3 that the are level. It is hard to see in the picture but the 1st picture and the cap on the right in the last picture is the one that is raised and the 2nd picture and the left one in the last picture is the one that is level. I really do not want you to get these painted and then find out you have 2 different ones. Let me know what you find out. Thanks. Attached Images __________________ Note: All parts I have for sale are also for sale locally. I currently own: 1940 Chevy Fire truck (project), 1946 Chevy truck (project), 1946 Chevy 1 Ton pick up, 1953 Chevy school bus (storage area), 1968 Chevy C10 (I have drove for 26 years), 1994 Chevy C2500 (daily driver), 2005 GMC crew cab K2500 (parts hauler) and more trucks for parts.

09-12-2013, 04:13 PM	#286
5150 C10 Club Tennessee Join Date: Mar 2003 Location: White House, TN 37188 Posts: 8,281	Re: Project Patina Burb Todd, one of them is different. My buddy, Brian, painted my 71 plate for me. It looks great. Posted via Mobile Device __________________ Bryan www.gmtruckshow.com Project "Andes"-Halen's First Truck Project: Patina Burb for he is God’s servant for your good. But if you do wrong, be afraid, for he does not bear the sword in vain. For he is the servant of God, an avenger who carries out God’s wrath on the wrongdoer. Romans 13:4

09-12-2013, 04:16 PM	#287
5150 C10 Club Tennessee Join Date: Mar 2003 Location: White House, TN 37188 Posts: 8,281	Re: Project Patina Burb Body work is all done. I need to sand it down and I'll be ready for paint. Posted via Mobile Device __________________ Bryan www.gmtruckshow.com Project "Andes"-Halen's First Truck Project: Patina Burb for he is God’s servant for your good. But if you do wrong, be afraid, for he does not bear the sword in vain. For he is the servant of God, an avenger who carries out God’s wrath on the wrongdoer. Romans 13:4

09-12-2013, 06:16 PM	#289
Rusbuilt Registered User Join Date: Mar 2012 Location: Knoxville, TN Posts: 5,381	Re: Project Patina Burb Nice work Bryan!! __________________ -Rus PLEASE HELP WITH PROJECT UNDERHAULINPaypal donations accepted @ rus1785@yahoo.com Rusbuilt's garage 1968 Chevy C-30 Darcy SOLD Rusbuilt shop truck *SOLD*

09-17-2013, 09:02 AM	#290
5150 C10 Club Tennessee Join Date: Mar 2003 Location: White House, TN 37188 Posts: 8,281	Re: Project Patina Burb Sanded it down yesterday and I'm ready for paint. I'm going to try to knock it out on the 28th. That's the next day that I'm off. I ordered my stuff yesterday to make it look patina, just need to go grab the paint. __________________ Bryan www.gmtruckshow.com Project "Andes"-Halen's First Truck Project: Patina Burb for he is God’s servant for your good. But if you do wrong, be afraid, for he does not bear the sword in vain. For he is the servant of God, an avenger who carries out God’s wrath on the wrongdoer. Romans 13:4

09-20-2013, 10:20 AM	#291
5150 C10 Club Tennessee Join Date: Mar 2003 Location: White House, TN 37188 Posts: 8,281	Re: Project Patina Burb About to start painting the white on top today. Also, found another member on the board that it attempting to do what I REALLY want to do instead of using 15 inch steelies with the 67 caps. He's using the Mobsteel wheels with the 67 caps. This is a pic of the 18's, but I'll use the 20's. __________________ Bryan www.gmtruckshow.com Project "Andes"-Halen's First Truck Project: Patina Burb for he is God’s servant for your good. But if you do wrong, be afraid, for he does not bear the sword in vain. For he is the servant of God, an avenger who carries out God’s wrath on the wrongdoer. Romans 13:4



Register or Log In To remove these advertisements.

09-28-2013, 07:02 PM	#293
5150 C10 Club Tennessee Join Date: Mar 2003 Location: White House, TN 37188 Posts: 8,281	Re: Project Patina Burb Started painting on the burb today. It's Blue!! Posted via Mobile Device __________________ Bryan www.gmtruckshow.com Project "Andes"-Halen's First Truck Project: Patina Burb for he is God’s servant for your good. But if you do wrong, be afraid, for he does not bear the sword in vain. For he is the servant of God, an avenger who carries out God’s wrath on the wrongdoer. Romans 13:4

09-28-2013, 07:18 PM	#294
CG BlahBlahBlah Join Date: Feb 2002 Location: Wa. Posts: 19,981	Re: Project Patina Burb Lookin good ... are the kids bugging you for a ride yet? __________________ … … … … … … … … ... … … … … … … … … … … …

09-28-2013, 07:21 PM	#295
Rusbuilt Registered User Join Date: Mar 2012 Location: Knoxville, TN Posts: 5,381	Re: Project Patina Burb Looks good bryan!! __________________ -Rus PLEASE HELP WITH PROJECT UNDERHAULINPaypal donations accepted @ rus1785@yahoo.com Rusbuilt's garage 1968 Chevy C-30 Darcy SOLD Rusbuilt shop truck *SOLD*

09-28-2013, 07:55 PM	#297
Rusbuilt Registered User Join Date: Mar 2012 Location: Knoxville, TN Posts: 5,381	Re: Project Patina Burb I thinned it down and put it in a spray bottle. Then I sprayed it on. __________________ -Rus PLEASE HELP WITH PROJECT UNDERHAULINPaypal donations accepted @ rus1785@yahoo.com Rusbuilt's garage 1968 Chevy C-30 Darcy SOLD Rusbuilt shop truck *SOLD*

09-28-2013, 09:05 PM	#298
5150 C10 Club Tennessee Join Date: Mar 2003 Location: White House, TN 37188 Posts: 8,281	Re: Project Patina Burb What did you thin it down with? Posted via Mobile Device __________________ Bryan www.gmtruckshow.com Project "Andes"-Halen's First Truck Project: Patina Burb for he is God’s servant for your good. But if you do wrong, be afraid, for he does not bear the sword in vain. For he is the servant of God, an avenger who carries out God’s wrath on the wrongdoer. Romans 13:4 Last edited by 5150; 09-29-2013 at 10:43 PM.

09-29-2013, 02:17 PM	#299
cubber Registered User Join Date: Mar 2012 Location: Leanna, TN Posts: 2,061	Re: Project Patina Burb WOW!! Looks great, Bryan. I like the blue. __________________ =MATTHEW 69 Stepper...Stroked & Bagged GONE BUT NOT FORGOTTEN 2003 Chevrolet Z71 Ext. Cab 1995 Cavalier gas saver!

09-29-2013, 04:28 PM	#300
5150 C10 Club Tennessee Join Date: Mar 2003 Location: White House, TN 37188 Posts: 8,281	Re: Project Patina Burb Thanks Matt, I really like it. Not too light, not too dark, and not too royal. Posted via Mobile Device __________________ Bryan www.gmtruckshow.com Project "Andes"-Halen's First Truck Project: Patina Burb for he is God’s servant for your good. But if you do wrong, be afraid, for he does not bear the sword in vain. For he is the servant of God, an avenger who carries out God’s wrath on the wrongdoer. Romans 13:4

Register or Log In To remove these advertisements.