OR Parting out 72 GMC K20 4x4 350-TH350 - Page 12 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**First c10** · 03-02-2015, 01:24 PM

Thanks for the response Tom
My sons truck is a 1968 but the rear spring length was 56" so I ordered the lift for this frame. I will measure the spring again as it has been a little while. I thinks the spring eye to center pin was 28". Another question is what is the price on the/a 4x4 rear axle?
Thanks
Scott

**tll74** · 03-06-2015, 02:49 AM

Quote:

Originally Posted by First c10

Thanks for the response Tom
My sons truck is a 1968 but the rear spring length was 56" so I ordered the lift for this frame. I will measure the spring again as it has been a little while. I thinks the spring eye to center pin was 28". Another question is what is the price on the/a 4x4 rear axle?
Thanks
Scott

Scott, I want 400.00 for the rear axle assy. Plus shipping or pick it up. It is a 3.07 posi

Quote:

Originally Posted by lucky71gmc

Replying to your February 17, 2015 message, if you can verify you have the rear most frame member z shaped plate and front GMC 4 X 4 bumper brackets I would like them. Thanks Br.

No problem on the cross member and the bumper brackets.

Quote:

Originally Posted by pimpston65

any chance of the transfer case bracket...

45.00 for the complete RH transfer case support assembly. 15.00 shipping.

Quote:

Originally Posted by clemsonteg

Do you still have the water pump pulley? I can't tell from the picture, but is the crank pulley 2 groove as well? I need both pulleys with 2 grooves if you have them.

Not sure of the pictured items but I have many others. 45.00 for the pair plus 15.00 shipping.

Thanks, Tom

**pimpston65** · 03-06-2015, 04:25 AM

Quote:

Originally Posted by tll74

Scott, I want 400.00 for the rear axle assy. Plus shipping or pick it up. It is a 3.07 posi

No problem on the cross member and the bumper brackets.

45.00 for the complete RH transfer case support assembly. 15.00 shipping.

Not sure of the pictured items but I have many others. 45.00 for the pair plus 15.00 shipping.

Thanks, Tom

can you post a picture?

clemsonteg · 03-06-2015, 10:34 PM

Quote:

Originally Posted by tll74

Not sure of the pictured items but I have many others. 45.00 for the pair plus 15.00 shipping.

Thanks, Tom

Interested in the pulleys if you have a matching set of double groove water pump and crank pulleys. The alternator is on the driver side, compressor on the passenger side. Short water pump with te 2" bolt pattern fan.

**tll74** · 03-08-2015, 04:22 AM

Quote:

Originally Posted by pimpston65

can you post a picture?

Yes but it would be monday before I can.

Quote:

Originally Posted by HOTRODSBYCHIP

Do you still have the upper and lower control arms?

Ummm...this is a 4x4 thread. Are you looking for 2wd control arms? I do have all the choices.

Quote:

Originally Posted by clemsonteg

Interested in the pulleys if you have a matching set of double groove water pump and crank pulleys. The alternator is on the driver side, compressor on the passenger side. Short water pump with te 2" bolt pattern fan.

No problem..I have what your looking for. PM me if your up for these.

Thanks, Tom

**pimpston65** · 03-18-2015, 01:07 AM

[quote=tll74;7080865]Yes but it would be monday before I can.

any updates on the TC bracket?

engairuph · 03-08-2015, 05:46 PM

Looking for a heater control unit no a/c

**1968k20** · 04-14-2015, 07:35 PM

What parts do you have left?

Motorfist · 04-15-2015, 11:51 PM

nevermind

gmcdeadhead · 05-09-2015, 05:21 PM

do you have a 4x4 throttle cable ?

**19702wdc10** · 05-12-2015, 12:17 PM

Hello,

I am looking for a TH350 dipstick and tube for a 1970 C10 I believe it is approx. 34" long.

My truck had a tranny swap done and the previous owner put a car dipstick in and it is low behind the engine hitting the firewall.

Thanks
Joe

**gpat@earthlink.net** · 09-03-2015, 07:43 AM

Do you have a 72 Blazer rear brake fluid line bracket that attaches to the frame and one for the axle . Both lines.

rickcdewitt · 09-11-2015, 12:14 PM

69-72 k20 rear springs, 95415 ?

rickcdewitt · 09-11-2015, 12:27 PM

also good 4x4 350 fan shroud? could i get a depth measurement and fan opening measurement ? i'm thinking of using it on my 6.0l swap if it will work. the 2wd shroud i have is just shy of the 6.0l fan. thanks,rick.

Kubie_d · 09-29-2015, 07:35 AM

I would be interested in the top part of the
transfer case bracket.

DLTruck1973 · 09-29-2015, 12:05 PM

Quote:

Originally Posted by Kubie_d

I would be interested in the top part of the
transfer case bracket.

Are you the gentlemen I talked to on the phone this morning? Let me know if we can help you.

Thank you,
Thomas

Kubie_d · 09-29-2015, 02:09 PM

Quote:

Originally Posted by DLTruck1973

Are you the gentlemen I talked to on the phone this morning? Let me know if we can help you.

Thank you,
Thomas

Yes. I will be searching to find it split. I will be calling on you for other parts. Thanks again for all your help.
Chris
Posted via Mobile Device

Rednwhitec20 · 11-17-2015, 11:37 PM

I will take the far left crossmember in the very first picture and the front/rear hangers with the brackets that are located under the frame.

DLTruck1973 · 11-18-2015, 04:14 PM

Quote:

Originally Posted by Rednwhitec20

I will take the far left crossmember in the very first picture and the front/rear hangers with the brackets that are located under the frame.

Do you need the front spring hangers, forward and rear position and the rear spring hangers, forward and rear position?

I should have everything you need.

Do you have a zip code for shipping quote? It will be a couple of days before I can get to it. Super busy now.

Thank you,
Thomas

Rednwhitec20 · 11-18-2015, 10:43 PM

I should have everything you need.

Do you have a zip code for shipping quote? It will be a couple of days before I can get to it. Super busy now.

Thank you,
Thomas[/QUOTE]

I will take both rear cross members if you have them, all 4 rear hangers and mounts, shock mounts, and bed mounts if you have them. 66078 zip, Thanks

DLTruck1973 · 11-19-2015, 12:04 PM

Quote:

Originally Posted by Rednwhitec20

I should have everything you need.

Do you have a zip code for shipping quote? It will be a couple of days before I can get to it. Super busy now.

Thank you,
Thomas

I will take both rear cross members if you have them, all 4 rear hangers and mounts, shock mounts, and bed mounts if you have them. 66078 zip, Thanks[/QUOTE]

So basically everything from the cab back? I do have all of it. I will get it together as soon as I can but it will probably be Monday before I can quote.

Thank you,
Thomas

Rednwhitec20 · 11-19-2015, 06:38 PM

Quote:

Originally Posted by DLTruck1973

I will take both rear cross members if you have them, all 4 rear hangers and mounts, shock mounts, and bed mounts if you have them. 66078 zip, Thanks

So basically everything from the cab back? I do have all of it. I will get it together as soon as I can but it will probably be Monday before I can quote.

Thank you,
Thomas[/QUOTE]

Yes, that'll be fine. I am leaving the country for thanksgiving tomorrow morning but i will be back next Friday and we can get it payed and shipped.

68lowburb · 11-18-2015, 11:18 PM

hi interested in the tailgate hardwhare if you still have it ,the in gate stuff rods latches and handle thanks jimmy

03-02-2015, 01:24 PM	#1
First c10 Registered User Join Date: Dec 2012 Location: Los Banos CA Posts: 2,705	Re: Parting out 72 GMC K20 4x4 350-TH350 Thanks for the response Tom My sons truck is a 1968 but the rear spring length was 56" so I ordered the lift for this frame. I will measure the spring again as it has been a little while. I thinks the spring eye to center pin was 28". Another question is what is the price on the/a 4x4 rear axle? Thanks Scott __________________ 1956 Chevy Bel Air 2 door 1956 Chevy 210 4 Door 1970 K20 LWB project the Hulk build w/Supercharged 4.8L-ly2/4L60E HULK BUILD 1970 C10 Yellow/White Deluxe LWB w/ 5.3L-LC9/6L80E 1968 K10 LWB Dark green my son calls it "THE HULK Jr"HULK JR SOLD GO GO!!!

03-18-2015, 01:07 AM	#6
pimpston65 Senior Member Join Date: Aug 2013 Location: corktown,mi. Posts: 5,194	Re: Parting out 72 GMC K20 4x4 350-TH350 [quote=tll74;7080865]Yes but it would be monday before I can. any updates on the TC bracket?

03-08-2015, 05:46 PM	#7
engairuph Registered User Join Date: Oct 2014 Location: D'Iberville, MS Posts: 449	Re: Parting out 72 GMC K20 4x4 350-TH350 Looking for a heater control unit no a/c __________________ Ralph L. Jasper 69 4x4 Suburban PTO winch(NAVY) 13 GMC Ext cab 12 Ford Fusion SE(wife) MAI Interior shop

04-14-2015, 07:35 PM	#8
1968k20 Senior Member Join Date: Dec 2009 Location: Chester,California Posts: 5,618	Re: Parting out 72 GMC K20 4x4 350-TH350 What parts do you have left?

04-15-2015, 11:51 PM	#9
Motorfist Registered User Join Date: Apr 2015 Location: Ririe, Idaho Posts: 136	Re: Parting out 72 GMC K20 4x4 350-TH350 nevermind __________________ 67 c30 Cab and Chassis (ex motorhome truck) 68 c10 LWB 70 c30 Cab and Chassis 133" converted to Longhorn 72 K10 LWB Rust Bucket Hunting Truck Last edited by Motorfist; 05-11-2015 at 11:14 AM.

05-09-2015, 05:21 PM	#10
gmcdeadhead Registered User Join Date: Jul 2007 Location: branchburg, new jersey Posts: 568	Re: Parting out 72 GMC K20 4x4 350-TH350 do you have a 4x4 throttle cable ?

05-12-2015, 12:17 PM	#11
19702wdc10 Active Member Join Date: Jun 2013 Location: Locust Grove, Virginia Posts: 101	Re: Parting out 72 GMC K20 4x4 350-TH350 Hello, I am looking for a TH350 dipstick and tube for a 1970 C10 I believe it is approx. 34" long. My truck had a tranny swap done and the previous owner put a car dipstick in and it is low behind the engine hitting the firewall. Thanks Joe

09-03-2015, 07:43 AM	#12
gpat@earthlink.net Active Member Join Date: Jan 2011 Location: columbia, SC Posts: 156	Re: Parting out 72 GMC K20 4x4 350-TH350 Do you have a 72 Blazer rear brake fluid line bracket that attaches to the frame and one for the axle . Both lines.

09-11-2015, 12:14 PM	#13
rickcdewitt Registered User Join Date: Jan 2011 Location: Northern CA Posts: 163	Re: Parting out 72 GMC K20 4x4 350-TH350 69-72 k20 rear springs, 95415 ? __________________ 1970 k20 6.0l/nv4500/np205/14bff in progress build linkhttp://67-72chevytrucks.com/vboard/s...d.php?t=677014

09-11-2015, 12:27 PM	#14
rickcdewitt Registered User Join Date: Jan 2011 Location: Northern CA Posts: 163	Re: Parting out 72 GMC K20 4x4 350-TH350 also good 4x4 350 fan shroud? could i get a depth measurement and fan opening measurement ? i'm thinking of using it on my 6.0l swap if it will work. the 2wd shroud i have is just shy of the 6.0l fan. thanks,rick. __________________ 1970 k20 6.0l/nv4500/np205/14bff in progress build linkhttp://67-72chevytrucks.com/vboard/s...d.php?t=677014

09-29-2015, 07:35 AM	#15
Kubie_d Registered User Join Date: Jul 2013 Location: Flatonia, Texas Posts: 2	Re: Parting out 72 GMC K20 4x4 350-TH350 I would be interested in the top part of the transfer case bracket.

11-17-2015, 11:37 PM	#18
Rednwhitec20 Registered User Join Date: Jun 2014 Location: Princeton Kansas Posts: 235	Re: Parting out 72 GMC K20 4x4 350-TH350 I will take the far left crossmember in the very first picture and the front/rear hangers with the brackets that are located under the frame.

11-18-2015, 10:43 PM	#20
Rednwhitec20 Registered User Join Date: Jun 2014 Location: Princeton Kansas Posts: 235	Re: Parting out 72 GMC K20 4x4 350-TH350 I should have everything you need. Do you have a zip code for shipping quote? It will be a couple of days before I can get to it. Super busy now. Thank you, Thomas[/QUOTE] I will take both rear cross members if you have them, all 4 rear hangers and mounts, shock mounts, and bed mounts if you have them. 66078 zip, Thanks

11-18-2015, 11:18 PM	#23
68lowburb Registered User Join Date: Sep 2006 Location: prairieville, louisiana Posts: 883	Re: Parting out 72 GMC K20 4x4 350-TH350 hi interested in the tailgate hardwhare if you still have it ,the in gate stuff rods latches and handle thanks jimmy



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.