66 c10 first timer build - Page 12 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

williamsboys · 06-03-2013, 07:05 PM

Quote:

Originally Posted by nigilroyboy95

all u have to do is pay shipping

How much to south Alabama do u think it would cost
Posted via Mobile Device

nigilroyboy95 · 06-03-2013, 07:06 PM

zipcode?

williamsboys · 06-03-2013, 07:07 PM

Yea let's do it. How can I pay u
Posted via Mobile Device

nigilroyboy95 · 06-03-2013, 07:07 PM

paypal?

williamsboys · 06-03-2013, 07:27 PM

I don't have an account or computer. Just have my phone. Can I mail u a check?
Posted via Mobile Device

williamsboys · 06-03-2013, 07:41 PM

When can u ship em?
Posted via Mobile Device

williamsboys · 06-03-2013, 08:53 PM

Do they make replacement pieces for the lower area of the inside of the cab infront of the door? I might not have explained that area very well, I'm talking about the area in my pic a few posts above. I didn't see any patch panals in any magazines. Probably just fab it out of sheet metal?
Posted via Mobile Device

nigilroyboy95 · 06-03-2013, 08:56 PM

yes they make them lmc has them i have a new one i dont need i will trow in with the cab corners

williamsboys · 06-03-2013, 09:09 PM

Quote:

Originally Posted by nigilroyboy95

yes they make them lmc has them i have a new one i dont need i will trow in with the cab corners

Dang thanks! Is it for the passenger side? I think my drivers side is good but ill take it either way
Posted via Mobile Device

nigilroyboy95 · 06-03-2013, 09:16 PM

i dont remember what side it is

williamsboys · 06-03-2013, 10:08 PM

Quote:

Originally Posted by nigilroyboy95

i dont remember what side it is

Do you have any other patch panals that you don't need that you see I could use?
Posted via Mobile Device

williamsboys · 06-07-2013, 01:17 PM

Finished gutting it today. That guage cluster was a pain in the butt to remove but thanks to all the posts through out the forum I found out exactly what knobs I had to remove for the cluster to come out. I took the stap brackets off the back of the inner cab from the fuel tank but the bigger brackets on the floor have the nut in it for the cab mount. Has anyone removed those and maybe just welded the nut to the floor, or I guess you wouldn't even have to weld it.
http://

http://

Posted via Mobile Device

McMurphy · 06-07-2013, 05:24 PM

Quote:

Originally Posted by williamsboys

Has anyone removed those and maybe just welded the nut to the floor, or I guess you wouldn't even have to weld it.

Wow man, someone did remove those bottom tank pedestles here just recently too.
I was snivelling because it looks so much cleaner and I was wishing I had just bitten the bullet and done it too.

If I can remember who did it, or run across their build thread again I will link it for you.
(This is the bad part of reading everyone's build thread around here, sorry)

Great progress on yours though man, I know I really look forward to the day I can take a cab off like that and work with it !!

williamsboys · 06-07-2013, 05:29 PM

Quote:

Originally Posted by McMurphy

Wow man, someone did remove those bottom tank pedestles here just recently too.
I was snivelling because it looks so much cleaner and I was wishing I had just bitten the bullet and done it too.

If I can remember who did it, or run across their build thread again I will link it for you.
(This is the bad part of reading everyone's build thread around here, sorry)

Great progress on yours though man, I know I really look forward to the day I can take a cab off like that and work with it !!

Thanks dude. Yea all this definitely was not what I had in mind. But one thing led to another and here we are.
Posted via Mobile Device

McMurphy · 06-07-2013, 06:04 PM

Quote:

Originally Posted by williamsboys

Thanks dude. Yea all this definitely was not what I had in mind. But one thing led to another and here we are.
Posted via Mobile Device

Totally tell me about it ....

Hahahahahahah (not quite maniacle laughter yet)

Bomp · 06-08-2013, 11:16 AM

Here is a link to zippeay build. He removed the tank brackets.

This link will take you to pics of the cab without the tank brackets.
http://67-72chevytrucks.com/vboard/s...&postcount=157

This link will start you at the beginning.
http://67-72chevytrucks.com/vboard/s...d.php?t=513377

There is some great skills on this build so be careful.

nigilroyboy95 · 06-07-2013, 04:14 PM

i only have rocker panels after i send u the other parts and i need the rocker panels

williamsboys · 06-07-2013, 04:50 PM

Quote:

Originally Posted by nigilroyboy95

i only have rocker panels after i send u the other parts and i need the rocker panels

What is it?
Posted via Mobile Device

williamsboys · 06-07-2013, 09:16 PM

http://

This is a complete truck. Big back window supposedly no rusted out spots long wheel base fleetside. It's out by my mom's in Oklahoma. He wants 1500 for it. I wish I could get it.
Posted via Mobile Device

McMurphy · 06-07-2013, 10:38 PM

Unless it is a running rig, with a decent interior, $1500 is probably too much.
And it would have to be rust free, mostly.... LOL

nigilroyboy95 · 06-07-2013, 10:59 PM

i only paid 500 for my c10 stepside complete running

williamsboys · 06-08-2013, 12:45 PM

Thanks bomp
Posted via Mobile Device

williamsboys · 06-12-2013, 06:59 PM

Can someone send me in the right direction to a thread about installinga rear mount gas tank from brothers. I searched but o couldn't locate one.
Posted via Mobile Device

williamsboys · 06-12-2013, 07:52 PM

I think I got it. The extra hardware confused me.
Posted via Mobile Device

williamsboys · 06-12-2013, 07:57 PM

It doesn't seem like the straps are going to reach. Do have to use straps. Or can u just bolt it up?
Posted via Mobile Device

06-03-2013, 07:06 PM	#2
nigilroyboy95 Registered User Join Date: May 2013 Location: salisbury maryland Posts: 75	Re: 66 c10 first timer build zipcode? __________________ gm boy

06-03-2013, 07:07 PM	#3
williamsboys Registered User Join Date: Oct 2011 Location: fairhope al Posts: 397	Re: 66 c10 first timer build Yea let's do it. How can I pay u Posted via Mobile Device __________________ Williamsboy

06-03-2013, 07:07 PM	#4
nigilroyboy95 Registered User Join Date: May 2013 Location: salisbury maryland Posts: 75	Re: 66 c10 first timer build paypal? __________________ gm boy

06-03-2013, 07:27 PM	#5
williamsboys Registered User Join Date: Oct 2011 Location: fairhope al Posts: 397	Re: 66 c10 first timer build I don't have an account or computer. Just have my phone. Can I mail u a check? Posted via Mobile Device __________________ Williamsboy

06-03-2013, 07:41 PM	#6
williamsboys Registered User Join Date: Oct 2011 Location: fairhope al Posts: 397	Re: 66 c10 first timer build When can u ship em? Posted via Mobile Device __________________ Williamsboy

06-03-2013, 08:53 PM	#7
williamsboys Registered User Join Date: Oct 2011 Location: fairhope al Posts: 397	Re: 66 c10 first timer build Do they make replacement pieces for the lower area of the inside of the cab infront of the door? I might not have explained that area very well, I'm talking about the area in my pic a few posts above. I didn't see any patch panals in any magazines. Probably just fab it out of sheet metal? Posted via Mobile Device __________________ Williamsboy

06-03-2013, 08:56 PM	#8
nigilroyboy95 Registered User Join Date: May 2013 Location: salisbury maryland Posts: 75	Re: 66 c10 first timer build yes they make them lmc has them i have a new one i dont need i will trow in with the cab corners __________________ gm boy

06-03-2013, 09:16 PM	#10
nigilroyboy95 Registered User Join Date: May 2013 Location: salisbury maryland Posts: 75	Re: 66 c10 first timer build i dont remember what side it is __________________ gm boy

06-07-2013, 01:17 PM	#12
williamsboys Registered User Join Date: Oct 2011 Location: fairhope al Posts: 397	Re: 66 c10 first timer build Finished gutting it today. That guage cluster was a pain in the butt to remove but thanks to all the posts through out the forum I found out exactly what knobs I had to remove for the cluster to come out. I took the stap brackets off the back of the inner cab from the fuel tank but the bigger brackets on the floor have the nut in it for the cab mount. Has anyone removed those and maybe just welded the nut to the floor, or I guess you wouldn't even have to weld it. http:// http:// http:// Posted via Mobile Device __________________ Williamsboy

06-08-2013, 11:16 AM	#16
Bomp Registered User Join Date: Apr 2011 Location: . Posts: 3,104	Re: 66 c10 first timer build Here is a link to zippeay build. He removed the tank brackets. This link will take you to pics of the cab without the tank brackets. http://67-72chevytrucks.com/vboard/s...&postcount=157 This link will start you at the beginning. http://67-72chevytrucks.com/vboard/s...d.php?t=513377 There is some great skills on this build so be careful.

06-07-2013, 04:14 PM	#17
nigilroyboy95 Registered User Join Date: May 2013 Location: salisbury maryland Posts: 75	Re: 66 c10 first timer build i only have rocker panels after i send u the other parts and i need the rocker panels __________________ gm boy

06-07-2013, 09:16 PM	#19
williamsboys Registered User Join Date: Oct 2011 Location: fairhope al Posts: 397	Re: 66 c10 first timer build http:// This is a complete truck. Big back window supposedly no rusted out spots long wheel base fleetside. It's out by my mom's in Oklahoma. He wants 1500 for it. I wish I could get it. Posted via Mobile Device __________________ Williamsboy

06-07-2013, 10:38 PM	#20
McMurphy Registered User Join Date: Sep 2011 Location: Tacoma, WA Posts: 2,425	Re: 66 c10 first timer build Unless it is a running rig, with a decent interior, $1500 is probably too much. And it would have to be rust free, mostly.... LOL __________________ Michael McMurphy My 66 Stepside My 64 Tow Truck My 66 Tempest Table Of Contents Added to Page1

06-07-2013, 10:59 PM	#21
nigilroyboy95 Registered User Join Date: May 2013 Location: salisbury maryland Posts: 75	Re: 66 c10 first timer build i only paid 500 for my c10 stepside complete running __________________ gm boy

06-08-2013, 12:45 PM	#22
williamsboys Registered User Join Date: Oct 2011 Location: fairhope al Posts: 397	Re: 66 c10 first timer build Thanks bomp Posted via Mobile Device __________________ Williamsboy



Register or Log In To remove these advertisements.

06-12-2013, 06:59 PM	#23
williamsboys Registered User Join Date: Oct 2011 Location: fairhope al Posts: 397	Re: 66 c10 first timer build Can someone send me in the right direction to a thread about installinga rear mount gas tank from brothers. I searched but o couldn't locate one. Posted via Mobile Device __________________ Williamsboy

06-12-2013, 07:52 PM	#24
williamsboys Registered User Join Date: Oct 2011 Location: fairhope al Posts: 397	Re: 66 c10 first timer build I think I got it. The extra hardware confused me. Posted via Mobile Device __________________ Williamsboy

06-12-2013, 07:57 PM	#25
williamsboys Registered User Join Date: Oct 2011 Location: fairhope al Posts: 397	Re: 66 c10 first timer build It doesn't seem like the straps are going to reach. Do have to use straps. Or can u just bolt it up? Posted via Mobile Device __________________ Williamsboy

Register or Log In To remove these advertisements.