Glock and HuggerCST's official "Project 68" build thread - Page 12 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

glock35ipsc · 08-04-2008, 09:21 AM

WOW, I apparently have not been getting emails for new replies! I had no idea there were recent replies to the thread!

Alex, ALWAYS good to talk to you brother! That big block looks freakin awesome!

As far as updates, well about the only update I have is the measurable dust on the truck grew by 1/8".

Seriously though, it has been a crazy busy summer, and I have done nothing to the truck at all. The guy that was suppose to come over to look at it to give me an estimate on paint hasn't showed up, he says he is swamped since he fired all his bum help and is now doing everything by himself. Can't blame him though, he's busy so that is good for him.

Sadly, I'm losing the desire to work on it, and at times wish I could just trade it off for a real nice running truck that I could just get in and drive. As the kids get older I find myself doing more with them (which I WANT to do) and less time to be in the shop. Maybe this winter will change my mind, as we probably won't go snowmobiling quite as much as we did last year. If that's the case, hopefully I can find my way out to the shop more often.

OK, enough of the

FRENCHBLUE72 · 08-04-2008, 10:30 AM

Sounds like me last year but now imma back full force and working on the truck every chance I get..

my67chevytruck · 08-04-2008, 04:17 PM

I think we all go through that at one point. Hopefully, you can get back in the swing of things. Finish yours, and then maybe build one with the kids....

Good luck...

glock35ipsc · 10-24-2008, 10:06 AM

If anyone is interested, I am going to sell the new TCI TH-350 I bought for the project. After riding in my brother's 72 since he put in a TH-700R4 behind the 402, I want to go with the TH-700 now.

Here is the for sale post:

http://67-72chevytrucks.com/vboard/s...79#post2943879

Lemield · 10-24-2008, 10:24 AM

Bob,

I sent you a couple of PM's regarding the transmission.

I am definately interested in it.

Gray Ghost · 10-25-2008, 07:08 PM

Nice fab work!! Thanks for the heads up on your thread. Can't wait to see your truck in paint!

PS...great snowmobile pics....been too long since I've been in your state.

glock35ipsc · 10-27-2008, 01:53 PM

Look forward to seeing you next weekend Larry. Have any idea what day you might come up?

Thanks Gray Ghost! Snowmobiling season is right around the corner!

Still haven't done anything to the 68, but my son and I worked on my 70 K10 this weekend. That was enough to get my juices flowing again. I at least started clearing some of the crap it has collected on it over the past year or so. Might actually start doing a little work to finish up the dash soon. Hell, that's all that's left on it before I start priming and blocking it!

Here is my 70, "Goldie".

glock35ipsc · 10-31-2008, 06:12 PM

OK, so I saw a post today asking for info on sectioning a front crossmember. I remembered that I printed off Captkaos's "How-To" some time ago. I have always wanted the front to be lower, but didn't really want to use lowering springs with the drop spindles. So, since I have two extra front crossmembers (one will go in Dad's truck) I am gonna give it a try!

When I get around to it I will post pics as I go.

SkullCandy · 10-31-2008, 07:56 PM

Quote:

Originally Posted by glock35ipsc

Look forward to seeing you next weekend Larry. Have any idea what day you might come up?

Thanks Gray Ghost! Snowmobiling season is right around the corner!

Still haven't done anything to the 68, but my son and I worked on my 70 K10 this weekend. That was enough to get my juices flowing again. I at least started clearing some of the crap it has collected on it over the past year or so. Might actually start doing a little work to finish up the dash soon. Hell, that's all that's left on it before I start priming and blocking it!

Here is my 70, "Goldie".

Can't wait

glock35ipsc · 10-31-2008, 08:05 PM

Me neither!!!!

68,69 K20 · 10-31-2008, 08:21 PM

Already here!! Talked to my supervisor today who is a big sledhead, and he said there was at least 2+ feet in the higher elevations, where he normally rides.

I'm not sure we got that much all of last winter or the winter previous. Don't worry, judging by your location, I'm sure the snow can't be too far off

glock35ipsc · 11-03-2008, 01:03 PM

Thanks Larry, was good to see you again!

OK, so the TH350 is now gone. It will soon be burning up the road in Lemield's sweet green 70 CST.

So, now it's time to find me a TH700 core to use for a mock-up, then I can get the engine moved up (still in the 6-cyl position), get the exhaust lengthened, and move the trans crossmember back (or build a new one).

But first, I will be working on finishing the sheetmetal work on the cab. Mostly consists of the dash (finish welding & grinding, finish glove box opening and bracing, cut holes for the cup holders), and seam sealing. I also need to do something to the bottom of the cab. Prime and undercoat or ??????

Lemield · 11-03-2008, 01:41 PM

Quote:

Originally Posted by glock35ipsc

Thanks Larry, was good to see you again!

OK, so the TH350 is now gone. It will soon be burning up the road in Lemield's sweet green 70 CST.

So, now it's time to find me a TH700 core to use for a mock-up, then I can get the engine moved up (still in the 6-cyl position), get the exhaust lengthened, and move the trans crossmember back (or build a new one).

But first, I will be working on finishing the sheetmetal work on the cab. Mostly consists of the dash (finish welding & grinding, finish glove box opening and bracing, cut holes for the cup holders), and seam sealing. I also need to do something to the bottom of the cab. Prime and undercoat or ??????

Bob,

Thanks again for the transmission. As usual, it was a pleasure to visit with you and your family....your kids are great! I got the grand tour of the trucks and it was great!

Take care

glock35ipsc · 11-03-2008, 04:50 PM

Crapola! I forgot to add that along with the sectioned front cross member, I am going to add a U-notch in the frame over the rear end. Going to go with 6" springs in the rear for now, but I wanted it set up to bag it if the desire was to ever strike me.

glock35ipsc · 11-09-2008, 04:38 PM

Wow, real work got done today! Haha!

I got the inner frame for the glove box built. I got it screwed in place to the dash, then ate lunch. I'm heading back out right now to drill some holes then start plug welding it in place. Once that is done, I will get the cupholders located and cut. If I have time today, I'll install everything into the dash and take some pics.

I have pics of the glove box frame, and I'll post all the pics up later tonight or tomorrow.

glock35ipsc · 11-09-2008, 10:47 PM

OK, the first real progress pictures in a long time!!!

I first got the frame work made for the glove box. Once that was done, I screwed it to the dash, then drilled several holes so I could plug weld the frame to the dash. Once that was done, I welded the ends of the frame to the original dash metal. This keeps the new dash and glove box from moving or wiggling. It is rock solid. I still need to do a little adjusting to the glove box latch because it is real tight, but that won't take long.

Next I made a template for the cup holders and drew them out on the dash. Cut those with the air saw, trimmed, and drilled mounting holes.

With all the holes that have been cut on the dash, the center section has been stretched to the point that even with everything installed, it was very wavy. So I had to install bracing between the cup holders and radio, and the radio and A/C controller. The bracing is plug welded to the dash, and the ends of the bracing is also welded to the original dash metal. Rock solid!

So now, the dash is perfectly flat. Well, within a 1/16" at least.

So after everything was braced and the plug welds were ground down, I installed everything to see what it looked like.

So far, I am extremely happy with the way it is turning out. This definitely lit a fire under my arse to get this thing done! This dash project was the last major thing that needs done to the cab. I still have to sperad a little filler on the dash, finish grinding the tack welds around the outside of the dash, seam seal everything, do a little grinding here and there, make a plate for a fuse panel to mount to, and I am pretty much ready to get it in primer.

glock35ipsc · 11-09-2008, 10:52 PM

More:

glock35ipsc · 11-09-2008, 10:54 PM

My daughter had my camera taking pictures of anything and everything she saw in the shop. Her 4-wheeler, her brother, even busted me!

glock35ipsc · 11-09-2008, 11:09 PM

Couple of more views:

Richard8971 · 11-09-2008, 11:47 PM

That dash is looking sweet... can't wait to see how the rest turns out.

Don

**Palf70Step** · 11-10-2008, 06:29 AM

Very nice. Glad to see you back on it!

Riveted1 · 11-10-2008, 09:05 AM

Wow! That looks great! I'm glad to see your back at it too!

FRENCHBLUE72 · 11-10-2008, 09:14 AM

Very nice glock keep up the good work that dash looks b!tchin.

glock35ipsc · 11-10-2008, 11:34 AM

Thanks guys! It felt good to get this part done, it was the biggest hurdle to get it ready for paint. There are still a few things left to do to the cab, but they are minor compared to the dash.

VA72C10 · 11-10-2008, 03:48 PM

Great work and nice custom touches!

08-04-2008, 09:21 AM	#276
glock35ipsc Next project: 1970 K10 Join Date: Feb 2004 Location: Fort Collins, Colo 80524 Posts: 6,684	Re: Glock's official "Project 68" build thread WOW, I apparently have not been getting emails for new replies! I had no idea there were recent replies to the thread! Alex, ALWAYS good to talk to you brother! That big block looks freakin awesome! As far as updates, well about the only update I have is the measurable dust on the truck grew by 1/8". Seriously though, it has been a crazy busy summer, and I have done nothing to the truck at all. The guy that was suppose to come over to look at it to give me an estimate on paint hasn't showed up, he says he is swamped since he fired all his bum help and is now doing everything by himself. Can't blame him though, he's busy so that is good for him. Sadly, I'm losing the desire to work on it, and at times wish I could just trade it off for a real nice running truck that I could just get in and drive. As the kids get older I find myself doing more with them (which I WANT to do) and less time to be in the shop. Maybe this winter will change my mind, as we probably won't go snowmobiling quite as much as we did last year. If that's the case, hopefully I can find my way out to the shop more often. OK, enough of the __________________ *Bob* 1970 Chevy K10 LWB "Goldie" 350/TH350 *next project!!* 1981 Chevy C10 LWB 355/TH350 - My son's truck LS SWAP FORUM! Tons of LS swap info here! PLEASE CLICK HERE TO SUPPORT THE GREATEST BOARD ON THE NET! CLICK HERE FOR THE FAQ INDEX by KRUE

08-04-2008, 10:30 AM	#277
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,606	Re: Glock's official "Project 68" build thread Sounds like me last year but now imma back full force and working on the truck every chance I get.. __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

08-04-2008, 04:17 PM	#278
my67chevytruck Under Construction Join Date: Oct 2007 Location: Midlothian,TX (DFW) Posts: 4,555	Re: Glock's official "Project 68" build thread I think we all go through that at one point. Hopefully, you can get back in the swing of things. Finish yours, and then maybe build one with the kids.... Good luck... __________________ Heath subscribe to the board here: http://67-72chevytrucks.com/vboard/payments.php http://67-72chevytrucks.com/vboard/s...d.php?t=157669 FAQ how to's 1956 Chevy Apache 1967 C10 SWB FleetSide (under construction) 1969 K10 SWB FleetSide (Future Build) 1972 C10 SWB Stepside (Future Build) 56 chevy truck : http://www.cardomain.com/ride/2955823/1 67 truck build: http://www.67-72chevytrucks.com/vboard/showthread.php?t=281357/1 69 k10: http://67-72chevytrucks.com/vboard/s...d.php?t=389470

10-24-2008, 10:06 AM	#279
glock35ipsc Next project: 1970 K10 Join Date: Feb 2004 Location: Fort Collins, Colo 80524 Posts: 6,684	Re: Glock's official "Project 68" build thread If anyone is interested, I am going to sell the new TCI TH-350 I bought for the project. After riding in my brother's 72 since he put in a TH-700R4 behind the 402, I want to go with the TH-700 now. Here is the for sale post: http://67-72chevytrucks.com/vboard/s...79#post2943879 __________________ *Bob* 1970 Chevy K10 LWB "Goldie" 350/TH350 *next project!!* 1981 Chevy C10 LWB 355/TH350 - My son's truck LS SWAP FORUM! Tons of LS swap info here! PLEASE CLICK HERE TO SUPPORT THE GREATEST BOARD ON THE NET! CLICK HERE FOR THE FAQ INDEX by KRUE

10-24-2008, 10:24 AM	#280
Lemield Registered User Join Date: Dec 2004 Location: Arvada Colorado Posts: 1,321	Re: Glock's official "Project 68" build thread Bob, I sent you a couple of PM's regarding the transmission. I am definately interested in it. __________________ Larry 1949 Willys CJ2A, Kubota Turbo Diesel engine, Warn Overdrive, 11 inch brakes, 12volt, Warn M8000 Winch "Little Green" 1970 Rustoleum Roller Red C20 Custom Camper 454 TH400 "Big Red" 1971 K20 6.2 Turbo Diesel 4x4 4spd Ranger Overdrive "Pumpkin Wagon" 2005 VW Beetle Diesel 44+ MPG "Silver Bullet"

10-25-2008, 07:08 PM	#281
Gray Ghost Senior Member Join Date: Sep 2004 Location: Terrell, TX Posts: 1,967	Re: Glock's official "Project 68" build thread Nice fab work!! Thanks for the heads up on your thread. Can't wait to see your truck in paint! PS...great snowmobile pics....been too long since I've been in your state. __________________ Kelly '05 GMC Sierra SLE Z71 Bone stock except for new bed rail caps. Last edited by Gray Ghost; 10-25-2008 at 07:09 PM.

10-27-2008, 01:53 PM	#282
glock35ipsc Next project: 1970 K10 Join Date: Feb 2004 Location: Fort Collins, Colo 80524 Posts: 6,684	Re: Glock's official "Project 68" build thread Look forward to seeing you next weekend Larry. Have any idea what day you might come up? Thanks Gray Ghost! Snowmobiling season is right around the corner! Still haven't done anything to the 68, but my son and I worked on my 70 K10 this weekend. That was enough to get my juices flowing again. I at least started clearing some of the crap it has collected on it over the past year or so. Might actually start doing a little work to finish up the dash soon. Hell, that's all that's left on it before I start priming and blocking it! Here is my 70, "Goldie". __________________ *Bob* 1970 Chevy K10 LWB "Goldie" 350/TH350 *next project!!* 1981 Chevy C10 LWB 355/TH350 - My son's truck LS SWAP FORUM! Tons of LS swap info here! PLEASE CLICK HERE TO SUPPORT THE GREATEST BOARD ON THE NET! CLICK HERE FOR THE FAQ INDEX by KRUE

10-31-2008, 06:12 PM	#283
glock35ipsc Next project: 1970 K10 Join Date: Feb 2004 Location: Fort Collins, Colo 80524 Posts: 6,684	Re: Glock's official "Project 68" build thread OK, so I saw a post today asking for info on sectioning a front crossmember. I remembered that I printed off Captkaos's "How-To" some time ago. I have always wanted the front to be lower, but didn't really want to use lowering springs with the drop spindles. So, since I have two extra front crossmembers (one will go in Dad's truck) I am gonna give it a try! When I get around to it I will post pics as I go. __________________ *Bob* 1970 Chevy K10 LWB "Goldie" 350/TH350 *next project!!* 1981 Chevy C10 LWB 355/TH350 - My son's truck LS SWAP FORUM! Tons of LS swap info here! PLEASE CLICK HERE TO SUPPORT THE GREATEST BOARD ON THE NET! CLICK HERE FOR THE FAQ INDEX by KRUE

10-31-2008, 08:05 PM	#285
glock35ipsc Next project: 1970 K10 Join Date: Feb 2004 Location: Fort Collins, Colo 80524 Posts: 6,684	Re: Glock's official "Project 68" build thread Me neither!!!! __________________ *Bob* 1970 Chevy K10 LWB "Goldie" 350/TH350 *next project!!* 1981 Chevy C10 LWB 355/TH350 - My son's truck LS SWAP FORUM! Tons of LS swap info here! PLEASE CLICK HERE TO SUPPORT THE GREATEST BOARD ON THE NET! CLICK HERE FOR THE FAQ INDEX by KRUE

10-31-2008, 08:21 PM	#286
68,69 K20 They call me the Breeze... Join Date: Jul 2007 Location: New York Posts: 2,251	Re: Glock's official "Project 68" build thread Already here!! Talked to my supervisor today who is a big sledhead, and he said there was at least 2+ feet in the higher elevations, where he normally rides. I'm not sure we got that much all of last winter or the winter previous. Don't worry, judging by your location, I'm sure the snow can't be too far off __________________ Mike 69 K20 "Beer is proof God loves us and wants us to be happy"....Ben Franklin

11-03-2008, 01:03 PM	#287
glock35ipsc Next project: 1970 K10 Join Date: Feb 2004 Location: Fort Collins, Colo 80524 Posts: 6,684	Re: Glock's official "Project 68" build thread Thanks Larry, was good to see you again! OK, so the TH350 is now gone. It will soon be burning up the road in Lemield's sweet green 70 CST. So, now it's time to find me a TH700 core to use for a mock-up, then I can get the engine moved up (still in the 6-cyl position), get the exhaust lengthened, and move the trans crossmember back (or build a new one). But first, I will be working on finishing the sheetmetal work on the cab. Mostly consists of the dash (finish welding & grinding, finish glove box opening and bracing, cut holes for the cup holders), and seam sealing. I also need to do something to the bottom of the cab. Prime and undercoat or ?????? __________________ *Bob* 1970 Chevy K10 LWB "Goldie" 350/TH350 *next project!!* 1981 Chevy C10 LWB 355/TH350 - My son's truck LS SWAP FORUM! Tons of LS swap info here! PLEASE CLICK HERE TO SUPPORT THE GREATEST BOARD ON THE NET! CLICK HERE FOR THE FAQ INDEX by KRUE

11-03-2008, 04:50 PM	#289
glock35ipsc Next project: 1970 K10 Join Date: Feb 2004 Location: Fort Collins, Colo 80524 Posts: 6,684	Re: Glock's official "Project 68" build thread Crapola! I forgot to add that along with the sectioned front cross member, I am going to add a U-notch in the frame over the rear end. Going to go with 6" springs in the rear for now, but I wanted it set up to bag it if the desire was to ever strike me. __________________ *Bob* 1970 Chevy K10 LWB "Goldie" 350/TH350 *next project!!* 1981 Chevy C10 LWB 355/TH350 - My son's truck LS SWAP FORUM! Tons of LS swap info here! PLEASE CLICK HERE TO SUPPORT THE GREATEST BOARD ON THE NET! CLICK HERE FOR THE FAQ INDEX by KRUE

11-09-2008, 04:38 PM	#290
glock35ipsc Next project: 1970 K10 Join Date: Feb 2004 Location: Fort Collins, Colo 80524 Posts: 6,684	Re: Glock's official "Project 68" build thread Wow, real work got done today! Haha! I got the inner frame for the glove box built. I got it screwed in place to the dash, then ate lunch. I'm heading back out right now to drill some holes then start plug welding it in place. Once that is done, I will get the cupholders located and cut. If I have time today, I'll install everything into the dash and take some pics. I have pics of the glove box frame, and I'll post all the pics up later tonight or tomorrow. __________________ *Bob* 1970 Chevy K10 LWB "Goldie" 350/TH350 *next project!!* 1981 Chevy C10 LWB 355/TH350 - My son's truck LS SWAP FORUM! Tons of LS swap info here! PLEASE CLICK HERE TO SUPPORT THE GREATEST BOARD ON THE NET! CLICK HERE FOR THE FAQ INDEX by KRUE

11-09-2008, 10:47 PM	#291
glock35ipsc Next project: 1970 K10 Join Date: Feb 2004 Location: Fort Collins, Colo 80524 Posts: 6,684	Re: Glock's official "Project 68" build thread OK, the first real progress pictures in a long time!!! I first got the frame work made for the glove box. Once that was done, I screwed it to the dash, then drilled several holes so I could plug weld the frame to the dash. Once that was done, I welded the ends of the frame to the original dash metal. This keeps the new dash and glove box from moving or wiggling. It is rock solid. I still need to do a little adjusting to the glove box latch because it is real tight, but that won't take long. Next I made a template for the cup holders and drew them out on the dash. Cut those with the air saw, trimmed, and drilled mounting holes. With all the holes that have been cut on the dash, the center section has been stretched to the point that even with everything installed, it was very wavy. So I had to install bracing between the cup holders and radio, and the radio and A/C controller. The bracing is plug welded to the dash, and the ends of the bracing is also welded to the original dash metal. Rock solid! So now, the dash is perfectly flat. Well, within a 1/16" at least. So after everything was braced and the plug welds were ground down, I installed everything to see what it looked like. So far, I am extremely happy with the way it is turning out. This definitely lit a fire under my arse to get this thing done! This dash project was the last major thing that needs done to the cab. I still have to sperad a little filler on the dash, finish grinding the tack welds around the outside of the dash, seam seal everything, do a little grinding here and there, make a plate for a fuse panel to mount to, and I am pretty much ready to get it in primer. Attached Images __________________ *Bob* 1970 Chevy K10 LWB "Goldie" 350/TH350 *next project!!* 1981 Chevy C10 LWB 355/TH350 - My son's truck LS SWAP FORUM! Tons of LS swap info here! PLEASE CLICK HERE TO SUPPORT THE GREATEST BOARD ON THE NET! CLICK HERE FOR THE FAQ INDEX by KRUE

11-09-2008, 10:52 PM	#292
glock35ipsc Next project: 1970 K10 Join Date: Feb 2004 Location: Fort Collins, Colo 80524 Posts: 6,684	Re: Glock's official "Project 68" build thread More: Attached Images __________________ *Bob* 1970 Chevy K10 LWB "Goldie" 350/TH350 *next project!!* 1981 Chevy C10 LWB 355/TH350 - My son's truck LS SWAP FORUM! Tons of LS swap info here! PLEASE CLICK HERE TO SUPPORT THE GREATEST BOARD ON THE NET! CLICK HERE FOR THE FAQ INDEX by KRUE



Register or Log In To remove these advertisements.

11-09-2008, 10:54 PM	#293
glock35ipsc Next project: 1970 K10 Join Date: Feb 2004 Location: Fort Collins, Colo 80524 Posts: 6,684	Re: Glock's official "Project 68" build thread My daughter had my camera taking pictures of anything and everything she saw in the shop. Her 4-wheeler, her brother, even busted me! Attached Images __________________ *Bob* 1970 Chevy K10 LWB "Goldie" 350/TH350 *next project!!* 1981 Chevy C10 LWB 355/TH350 - My son's truck LS SWAP FORUM! Tons of LS swap info here! PLEASE CLICK HERE TO SUPPORT THE GREATEST BOARD ON THE NET! CLICK HERE FOR THE FAQ INDEX by KRUE

11-09-2008, 11:09 PM	#294
glock35ipsc Next project: 1970 K10 Join Date: Feb 2004 Location: Fort Collins, Colo 80524 Posts: 6,684	Re: Glock's official "Project 68" build thread Couple of more views: Attached Images __________________ *Bob* 1970 Chevy K10 LWB "Goldie" 350/TH350 *next project!!* 1981 Chevy C10 LWB 355/TH350 - My son's truck LS SWAP FORUM! Tons of LS swap info here! PLEASE CLICK HERE TO SUPPORT THE GREATEST BOARD ON THE NET! CLICK HERE FOR THE FAQ INDEX by KRUE

11-09-2008, 11:47 PM	#295
Richard8971 Still livin the "dream" in '54 Join Date: Nov 2006 Location: Tucson, AZ Posts: 2,656	Re: Glock's official "Project 68" build thread That dash is looking sweet... can't wait to see how the rest turns out. Don __________________ Current build. 1954 Chevrolet 3800 "Ella" SOLD! My '67 stepper "Tangerine Dream" "Anything worth doing is worth doing right" James Dean “When you have eliminated all which is impossible, then whatever remains, however improbable, must be the truth.” Sherlock Holmes "There is no spoon." Neo

11-10-2008, 06:29 AM	#296
Palf70Step State of Confusion! Join Date: Jul 2002 Location: Gulfport, MS USA Posts: 47,274	Re: Glock's official "Project 68" build thread Very nice. Glad to see you back on it! __________________ Bill 1970 Chevy Custom/10 LWB Fleetside 2010 Toyota Tacoma PreRunner SR5 Double Cab - DD Member of Louisiana Classic Truck Club (LCTC) Bill's Gallery Life isn't tied with a bow, but it's still a gift. Live simply. Love generously. Care deeply. Speak kindly. Leave the rest to God!

11-10-2008, 09:05 AM	#297
Riveted1 Tasty Cakes! Join Date: Apr 2003 Location: Gilbert, AZ Posts: 2,112	Re: Glock's official "Project 68" build thread Wow! That looks great! I'm glad to see your back at it too! __________________ I'm a little and a lot Ground beef: A cow with no legs. ---------------- '66 Chevy SWB "Penny" '67 Chevy Big Window SWB- aka "Pearl" '72 Burb- "Betty" "It's not a hearse dammit" '99 Chevy Ext. cab Silverado

11-10-2008, 09:14 AM	#298
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,606	Re: Glock's official "Project 68" build thread Very nice glock keep up the good work that dash looks b!tchin. __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

11-10-2008, 11:34 AM	#299
glock35ipsc Next project: 1970 K10 Join Date: Feb 2004 Location: Fort Collins, Colo 80524 Posts: 6,684	Re: Glock's official "Project 68" build thread Thanks guys! It felt good to get this part done, it was the biggest hurdle to get it ready for paint. There are still a few things left to do to the cab, but they are minor compared to the dash. __________________ *Bob* 1970 Chevy K10 LWB "Goldie" 350/TH350 *next project!!* 1981 Chevy C10 LWB 355/TH350 - My son's truck LS SWAP FORUM! Tons of LS swap info here! PLEASE CLICK HERE TO SUPPORT THE GREATEST BOARD ON THE NET! CLICK HERE FOR THE FAQ INDEX by KRUE

11-10-2008, 03:48 PM	#300
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	Re: Glock's official "Project 68" build thread Great work and nice custom touches! __________________ Looking for a 67-72 swb or blazer project in or around VA.

Register or Log In To remove these advertisements.