How to: Ruin a perfectly good C10 - Page 12 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

BB72CHEVKT · 05-12-2011, 10:47 AM

Quote:

Originally Posted by 67cheby

HOLY SMOKES.....your going so fast your making me DIZZY !!

I agree.

gringoloco · 05-12-2011, 12:39 PM

Quote:

Originally Posted by 67cheby

HOLY SMOKES.....your going so fast your making me DIZZY !!

Quote:

Originally Posted by BB72CHEVKT

I agree.

Haha- I don't have the luxury of being able to take my time- I have a wedding to (hopefully) drive it to in 5 weeks...

gringoloco · 05-13-2011, 12:44 AM

While I have the windshield out, and easy access to the dash pad, I decided to go ahead and dye it with the Corvette Bright Blue since it was a little faded compared to the armrests. I also shot the rubber cover for the rear view mirror (which had turned kinda green) and re-installed it and the visors with new stainless hardware. MUCH better without rust!

gringoloco · 05-13-2011, 12:59 AM

Then came the real work of the day: stripping and smoothing the bedsides and readying them for primer. Lots of repetitions of sanding and filling, but I think I finally have them close. I will wet sand and check for any spots I missed, as it is easier to see imperfections when it's all one color. Hopefully we will see some blue tomorrow

BACKYARD88 · 05-13-2011, 07:57 AM

You're really getting after it. Looks good!
Posted via Mobile Device

mcbassin · 05-13-2011, 08:39 AM

Man you aren't playin around with this project. Hard to believe how fast you're moving. It looks great too.

VA72C10 · 05-13-2011, 11:08 AM

Awesome progress. Interior looks GREAT!!!

**67cheby** · 05-13-2011, 11:12 AM

Wow

gringoloco · 05-13-2011, 02:26 PM

Quote:

Originally Posted by BACKYARD88

You're really getting after it. Looks good!
Posted via Mobile Device

Quote:

Originally Posted by mcbassin

Man you aren't playin around with this project. Hard to believe how fast you're moving. It looks great too.

Quote:

Originally Posted by VA72C10

Awesome progress. Interior looks GREAT!!!

Quote:

Originally Posted by 67cheby

Wow

Thanks fellas! I'd say it's turning out decently. If I were doing a full-on restore, it would be much better quality, but this will work for now

gringoloco · 05-13-2011, 02:37 PM

Today's lesson, boys and girls, is to ALWAYS check and double check your mix ratios and air pressure settings BEFORE you start painting.

I wet sanded the bedsides, which had a few small issues, but were deemed worthy of color, so I mixed up my HRF and got to it. Problem is, I was just spraying base/clear, so I had the wrong mix ratios in my head. Twice as much hardener and reducer as necessary yields a runny, dripping, sagging mess. Low air pressure results in a spatter-paint effect. Both of which are not conducive to good-looking paint on your truck...

Now I know why my clear came out so crappily, too. Seems I have a bad habit of resting my pinky on the air pressure fine adjustment knob. At least with double the hardener, the paint will be dry sooner, and I can fix it sooner

**67cheby** · 05-13-2011, 02:43 PM

man....i am shipping my truck to you tomorrow....i expect it back by the end of next week

Number98 · 05-13-2011, 02:51 PM

You are really knocking this thing out man!

Looking sweet!!

BB72CHEVKT · 05-13-2011, 05:13 PM

looks good in the pics

gringoloco · 05-13-2011, 07:59 PM

Quote:

Originally Posted by 67cheby

man....i am shipping my truck to you tomorrow....i expect it back by the end of next week

Haha- YOU need to get to work

Quote:

Originally Posted by Number98

You are really knocking this thing out man!

Looking sweet!!

Thanks! I'm working on a deadline here- starting to feel the crunch...

Quote:

Originally Posted by BB72CHEVKT

looks good in the pics

Yeah, it laid out nicely for the most part, just got a little sputtered at the rear of the driver's side and a few sags/runs. All sanded down and re-sprayed now; looks MUCH better

sourkraut · 05-13-2011, 08:18 PM

Are you using a clear coat or just the color? If you are using a clear is it flat too or satin?
Posted via Mobile Device

gringoloco · 05-13-2011, 08:42 PM

Quote:

Originally Posted by sourkraut

Are you using a clear coat or just the color? If you are using a clear is it flat too or satin?
Posted via Mobile Device

Single stage urethane, with the flattening agent already mixed in. Just activate and shoot. It will be staying 'satin'

gringoloco · 05-13-2011, 08:53 PM

A few pics of it dry. MUCH better this time around...

gringoloco · 05-13-2011, 08:56 PM

Stripped the masking off...

gringoloco · 05-13-2011, 09:07 PM

...and rolled her out in the sunlight

VA72C10 · 05-13-2011, 09:31 PM

Looks great from here!!!

So when do you paint the front end?

gringoloco · 05-13-2011, 10:03 PM

Quote:

Originally Posted by VA72C10

...So when do you paint the front end?

We'll see how things go tomorrow; lots of dis-assembly before paint...

Painter D · 05-13-2011, 10:54 PM

Pretty cool, keep it up

BACKYARD88 · 05-13-2011, 11:10 PM

Looking good!
Posted via Mobile Device

gringoloco · 05-14-2011, 09:11 AM

Quote:

Originally Posted by 69chevyshort

Pretty cool, keep it up

Quote:

Originally Posted by BACKYARD88

Looking good!
Posted via Mobile Device

Thanks guys! Nice to see it all one color

**67cheby** · 05-14-2011, 09:29 AM

looking great

05-13-2011, 12:44 AM	#278
gringoloco A guy with a truck Join Date: Sep 2005 Location: Germany, for now Posts: 5,921	Re: How to: Ruin a perfectly good C10 While I have the windshield out, and easy access to the dash pad, I decided to go ahead and dye it with the Corvette Bright Blue since it was a little faded compared to the armrests. I also shot the rubber cover for the rear view mirror (which had turned kinda green) and re-installed it and the visors with new stainless hardware. MUCH better without rust! Attached Images __________________ -Chris Instagram _elgringoloco_ '70 Short-Wide How to: Ruin a perfectly good C10 ‘70 Blazer ConversionHow To: Ruin a Perfectly Good 4wd '72 Highlander How To: Ruin a Perfectly Good K/5 (SOLD) '72 Blazer 2WD How to: Ruin a perfectly good Blazer (SOLD) '05 Yukon Daily Driven (not so stock) Yukon (SOLD) ‘07 Yukon Denali (daily) Members met list: SCOTI, darkhorse970, 67cheby, 67cheby'sGirl, klmore, porterbuilt, n2billet, Fastrucken, classicchev, Col Clank, GSFMECH, HuggerCST, Spray-Bomb, BACKYARD88, 5150, fine69, fatbass, smbrouss70, 65StreetCruiser, GAc10boy

05-13-2011, 12:59 AM	#279
gringoloco A guy with a truck Join Date: Sep 2005 Location: Germany, for now Posts: 5,921	Re: How to: Ruin a perfectly good C10 Then came the real work of the day: stripping and smoothing the bedsides and readying them for primer. Lots of repetitions of sanding and filling, but I think I finally have them close. I will wet sand and check for any spots I missed, as it is easier to see imperfections when it's all one color. Hopefully we will see some blue tomorrow Attached Images __________________ -Chris Instagram _elgringoloco_ '70 Short-Wide How to: Ruin a perfectly good C10 ‘70 Blazer ConversionHow To: Ruin a Perfectly Good 4wd '72 Highlander How To: Ruin a Perfectly Good K/5 (SOLD) '72 Blazer 2WD How to: Ruin a perfectly good Blazer (SOLD) '05 Yukon Daily Driven (not so stock) Yukon (SOLD) ‘07 Yukon Denali (daily) Members met list: SCOTI, darkhorse970, 67cheby, 67cheby'sGirl, klmore, porterbuilt, n2billet, Fastrucken, classicchev, Col Clank, GSFMECH, HuggerCST, Spray-Bomb, BACKYARD88, 5150, fine69, fatbass, smbrouss70, 65StreetCruiser, GAc10boy

05-13-2011, 07:57 AM	#280
BACKYARD88 On the fast track to nowhere.. Join Date: May 2006 Location: Splendora, Texas Posts: 5,316	Re: How to: Ruin a perfectly good C10 You're really getting after it. Looks good! Posted via Mobile Device __________________ -Mike Owen- Support the board here! 71 Chevy short fleet build thread Double D Norwood, Houston, Cecilia, Jackson, Monroe and counting

05-13-2011, 08:39 AM	#281
mcbassin Still Learning Join Date: Jul 2009 Location: Central Oklahoma Posts: 10,108	Re: How to: Ruin a perfectly good C10 Man you aren't playin around with this project. Hard to believe how fast you're moving. It looks great too. __________________ Mike "69 Short Wide" My Project 86 Silverado Landen's Project Instagram: @mcbassin My Website C/10 Club Oklahoma Facebook Group

05-13-2011, 11:08 AM	#282
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	Re: How to: Ruin a perfectly good C10 Awesome progress. Interior looks GREAT!!! __________________ Looking for a 67-72 swb or blazer project in or around VA.

05-13-2011, 11:12 AM	#283
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: How to: Ruin a perfectly good C10 Wow __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

05-13-2011, 02:37 PM	#285
gringoloco A guy with a truck Join Date: Sep 2005 Location: Germany, for now Posts: 5,921	Re: How to: Ruin a perfectly good C10 Today's lesson, boys and girls, is to ALWAYS check and double check your mix ratios and air pressure settings BEFORE you start painting. I wet sanded the bedsides, which had a few small issues, but were deemed worthy of color, so I mixed up my HRF and got to it. Problem is, I was just spraying base/clear, so I had the wrong mix ratios in my head. Twice as much hardener and reducer as necessary yields a runny, dripping, sagging mess. Low air pressure results in a spatter-paint effect. Both of which are not conducive to good-looking paint on your truck... Now I know why my clear came out so crappily, too. Seems I have a bad habit of resting my pinky on the air pressure fine adjustment knob. At least with double the hardener, the paint will be dry sooner, and I can fix it sooner Attached Images __________________ -Chris Instagram _elgringoloco_ '70 Short-Wide How to: Ruin a perfectly good C10 ‘70 Blazer ConversionHow To: Ruin a Perfectly Good 4wd '72 Highlander How To: Ruin a Perfectly Good K/5 (SOLD) '72 Blazer 2WD How to: Ruin a perfectly good Blazer (SOLD) '05 Yukon Daily Driven (not so stock) Yukon (SOLD) ‘07 Yukon Denali (daily) Members met list: SCOTI, darkhorse970, 67cheby, 67cheby'sGirl, klmore, porterbuilt, n2billet, Fastrucken, classicchev, Col Clank, GSFMECH, HuggerCST, Spray-Bomb, BACKYARD88, 5150, fine69, fatbass, smbrouss70, 65StreetCruiser, GAc10boy

05-13-2011, 02:43 PM	#286
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: How to: Ruin a perfectly good C10 man....i am shipping my truck to you tomorrow....i expect it back by the end of next week __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

05-13-2011, 02:51 PM	#287
Number98 Prestige Worldwide Join Date: Feb 2001 Location: Worldwide Posts: 2,552	Re: How to: Ruin a perfectly good C10 You are really knocking this thing out man! Looking sweet!!

05-13-2011, 05:13 PM	#288
BB72CHEVKT Junior Member Join Date: Mar 2007 Location: Hideaway, TX Posts: 4,950	Re: How to: Ruin a perfectly good C10 looks good in the pics __________________ 71 Suburban 350/700R4 Project Trixie 72 CHEVY,Highlander,SWB,396,T400

05-13-2011, 08:18 PM	#290
sourkraut Registered User Join Date: Sep 2008 Location: WI Posts: 1,243	Re: How to: Ruin a perfectly good C10 Are you using a clear coat or just the color? If you are using a clear is it flat too or satin? Posted via Mobile Device __________________ "The way it is" truck build http://67-72chevytrucks.com/vboard/s...d.php?t=359200

05-13-2011, 08:53 PM	#292
gringoloco A guy with a truck Join Date: Sep 2005 Location: Germany, for now Posts: 5,921	Re: How to: Ruin a perfectly good C10 A few pics of it dry. MUCH better this time around... Attached Images __________________ -Chris Instagram _elgringoloco_ '70 Short-Wide How to: Ruin a perfectly good C10 ‘70 Blazer ConversionHow To: Ruin a Perfectly Good 4wd '72 Highlander How To: Ruin a Perfectly Good K/5 (SOLD) '72 Blazer 2WD How to: Ruin a perfectly good Blazer (SOLD) '05 Yukon Daily Driven (not so stock) Yukon (SOLD) ‘07 Yukon Denali (daily) Members met list: SCOTI, darkhorse970, 67cheby, 67cheby'sGirl, klmore, porterbuilt, n2billet, Fastrucken, classicchev, Col Clank, GSFMECH, HuggerCST, Spray-Bomb, BACKYARD88, 5150, fine69, fatbass, smbrouss70, 65StreetCruiser, GAc10boy

05-13-2011, 08:56 PM	#293
gringoloco A guy with a truck Join Date: Sep 2005 Location: Germany, for now Posts: 5,921	Re: How to: Ruin a perfectly good C10 Stripped the masking off... Attached Images __________________ -Chris Instagram _elgringoloco_ '70 Short-Wide How to: Ruin a perfectly good C10 ‘70 Blazer ConversionHow To: Ruin a Perfectly Good 4wd '72 Highlander How To: Ruin a Perfectly Good K/5 (SOLD) '72 Blazer 2WD How to: Ruin a perfectly good Blazer (SOLD) '05 Yukon Daily Driven (not so stock) Yukon (SOLD) ‘07 Yukon Denali (daily) Members met list: SCOTI, darkhorse970, 67cheby, 67cheby'sGirl, klmore, porterbuilt, n2billet, Fastrucken, classicchev, Col Clank, GSFMECH, HuggerCST, Spray-Bomb, BACKYARD88, 5150, fine69, fatbass, smbrouss70, 65StreetCruiser, GAc10boy

05-13-2011, 09:07 PM	#294
gringoloco A guy with a truck Join Date: Sep 2005 Location: Germany, for now Posts: 5,921	Re: How to: Ruin a perfectly good C10 ...and rolled her out in the sunlight Attached Images __________________ -Chris Instagram _elgringoloco_ '70 Short-Wide How to: Ruin a perfectly good C10 ‘70 Blazer ConversionHow To: Ruin a Perfectly Good 4wd '72 Highlander How To: Ruin a Perfectly Good K/5 (SOLD) '72 Blazer 2WD How to: Ruin a perfectly good Blazer (SOLD) '05 Yukon Daily Driven (not so stock) Yukon (SOLD) ‘07 Yukon Denali (daily) Members met list: SCOTI, darkhorse970, 67cheby, 67cheby'sGirl, klmore, porterbuilt, n2billet, Fastrucken, classicchev, Col Clank, GSFMECH, HuggerCST, Spray-Bomb, BACKYARD88, 5150, fine69, fatbass, smbrouss70, 65StreetCruiser, GAc10boy

05-13-2011, 09:31 PM	#295
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	Re: How to: Ruin a perfectly good C10 Looks great from here!!! So when do you paint the front end? __________________ Looking for a 67-72 swb or blazer project in or around VA.



Register or Log In To remove these advertisements.

05-13-2011, 10:54 PM	#297
Painter D Registered User Join Date: Jun 2007 Location: DFW (Forney) Posts: 1,529	Re: How to: Ruin a perfectly good C10 Pretty cool, keep it up __________________ '58 SWB Fleetside...Front & Rear Porterbuilt Dropmember, 6.0 LS /4L60E. Accuair E-level, 20 Billet Specialties (Vintecs) '63 Buick Riviera ... AccuAir E-level, 20" Billet Specialties (Vintecs) http://67-72chevytrucks.com/vboard/s...=528853&page=5

05-13-2011, 11:10 PM	#298
BACKYARD88 On the fast track to nowhere.. Join Date: May 2006 Location: Splendora, Texas Posts: 5,316	Re: How to: Ruin a perfectly good C10 Looking good! Posted via Mobile Device __________________ -Mike Owen- Support the board here! 71 Chevy short fleet build thread Double D Norwood, Houston, Cecilia, Jackson, Monroe and counting

05-14-2011, 09:29 AM	#300
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: How to: Ruin a perfectly good C10 looking great __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

Register or Log In To remove these advertisements.