63 C10 SWB Dropmember Build - Page 12 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Pro Performance · 07-22-2015, 11:33 AM

We secured a spot at SEMA for the truck to be outside in part with VIAIR. Really excited to have it there. Here is a cool shot I took the other day and thought I would share.

**nlped** · 07-22-2015, 11:38 AM

Very cool! I'm looking forward to SEMA & seeing all the great vehicles and the new parts/pieces.

cheessee · 07-22-2015, 08:55 PM

Sema is a blast!! I went in 2012 and can't wait to go back but don't know when

northern 85 · 07-22-2015, 09:15 PM

Nice score! Nice pic!!

Pro Performance · 08-06-2015, 01:32 AM

Took the hood over to the painter today, to have it matched to the red already on the truck. Just one step closer to finishing it all up.

I am having some trouble finding a good way to install the headliner. I don't want to drill holes in the roof, but all adhesive tries, just doesn't work. Plus, with the heat out here, it may not last.

I have used the VHB 3M tape, but maybe I need to used more, all around the perimeter.

northern 85 · 08-06-2015, 05:54 AM

How about the industrial velcro its really rugged stuff!

chakah · 08-06-2015, 08:05 AM

I am so jealous Travis. That interior is badass!!!

aggie91 · 08-06-2015, 09:40 AM

How about attaching some rare earth magnets to the back of the headliner?

Like these:
http://www.rare-earth-magnets.com/magcraft-nsn0604/

each one as a pull force of 10 lbs for this size, there are others too.

These have 18 lbs of pull force each. Apex Magnets seems to have a better selection..
https://www.apexmagnets.com/1-5-x-1-8-disc

Both diameter and thickness effect the strength of the magnet. They have a 1.25" dia x .25" thick one that has a 30 lb pull force....

Pro Performance · 08-06-2015, 10:33 AM

Quote:

Originally Posted by northern 85

How about the industrial velcro its really rugged stuff!

I'll look into this, and tried some already. Problem is, the adhesive holding the velcro, is what can't hold.

Quote:

Originally Posted by chakah

I am so jealous Travis. That interior is badass!!!

Thanks man!

Quote:

Originally Posted by aggie91

How about attaching some rare earth magnets to the back of the headliner?

Like these:
http://www.rare-earth-magnets.com/magcraft-nsn0604/

each one as a pull force of 10 lbs for this size, there are others too.

These have 18 lbs of pull force each. Apex Magnets seems to have a better selection..
https://www.apexmagnets.com/1-5-x-1-8-disc

Both diameter and thickness effect the strength of the magnet. They have a 1.25" dia x .25" thick one that has a 30 lb pull force....

I think that will work pretty well. I can let the adhesive cure on the headliner before placing up there. This way the weight of the headline is pulling down while the adhesive is setting.... like it did with velcro.

Got some on the way right now.

Pro Performance · 08-09-2015, 05:43 PM

Made a lot of progress this weekend as I am getting prepared to leave Friday to start heading to the Goodguys show in northern California. Built it to drive, so that is exactly what I am doing. Was able to get the 1-piece windows in, and also start on the bed wood. I counter sunk the bottom side of the boards, so I can keep the bed bolts hidden underneath.

Still have to clear them all for water protection, and should be able to install by Wednesday.

**youngrodder** · 08-09-2015, 09:16 PM

Looks good Travis....Is that black paint or dark stain on the bed boards??? I like it.

Marc

Pro Performance · 08-10-2015, 10:20 AM

Quote:

Originally Posted by youngrodder

Looks good Travis....Is that black paint or dark stain on the bed boards??? I like it.

Marc

Thanks.... it is a stain, which I will do a satin clear sealant over it.

Twisted78SS · 08-10-2015, 10:25 AM

Looking great!,

Can't wait to see some pics of the trip, hope you have a blast..

Stickman · 08-10-2015, 07:24 PM

Looking good Travis , when you took the parts to the prison for PC did that include the frame rails also ?

Pro Performance · 08-10-2015, 09:01 PM

Quote:

Originally Posted by Stickman

Looking good Travis , when you took the parts to the prison for PC did that include the frame rails also ?

Yes, it did.

**Captainfab** · 08-11-2015, 01:14 AM

Is the one piece side window kit something you sell?

Pro Performance · 08-11-2015, 11:30 AM

Quote:

Originally Posted by Captainfab

Is the one piece side window kit something you sell?

Nothing I sell, and got it from Classic Truck Glass.

http://www.classictruckglass.com

Justin@EntropyRad · 08-11-2015, 04:23 PM

Truck looks good Travis!

Pro Performance · 08-11-2015, 04:46 PM

Quote:

Originally Posted by Justin@EntropyRad

Truck looks good Travis!

Thanks!

Pro Performance · 08-11-2015, 04:46 PM

Got started on the bed wood.

**nlped** · 08-11-2015, 06:44 PM

Bed floor looks killer!

DaddyOh · 08-11-2015, 07:51 PM

Which radiator did you use with the Vortec?

**Sac** · 08-12-2015, 01:10 AM

Quote:

Originally Posted by DaddyOh

Which radiator did you use with the Vortec?

He posted a picture on the pervious page. Looks like he is running a Champion radiator, he sells them as well.

**Captainfab** · 08-12-2015, 01:27 AM

How do you like their conversion kit? Did you go manual or electric?

Quote:

Originally Posted by Pro Performance

Nothing I sell, and got it from Classic Truck Glass.

http://www.classictruckglass.com

Pro Performance · 08-12-2015, 09:41 AM

Quote:

Originally Posted by nlped

Bed floor looks killer!

Thanks!

Quote:

Originally Posted by DaddyOh

Which radiator did you use with the Vortec?

I have the Champion with the hose locations moved to the passenger side and steam port added. I got this before we were dealers for Entropy. Both are great units, and the Entropy is made in the USA and a nice product.

Quote:

Originally Posted by Sac

He posted a picture on the pervious page. Looks like he is running a Champion radiator, he sells them as well.

Yep.

Quote:

Originally Posted by Captainfab

How do you like their conversion kit? Did you go manual or electric?

I liked it, and went with manual for simplicity. It was pretty straight forward to install and didn't take much modification at all. I would say the felts can fit a little better, but overall I am happy. The window will loosen up some over time, as it is tight in the felts right now.

07-22-2015, 11:33 AM	#276
Pro Performance Registered User Join Date: Aug 2010 Location: AZ Posts: 3,069	Re: 63 C10 SWB Dropmember Build We secured a spot at SEMA for the truck to be outside in part with VIAIR. Really excited to have it there. Here is a cool shot I took the other day and thought I would share.

07-22-2015, 11:38 AM	#277
nlped Senior Member Join Date: Jul 2009 Location: Hayden, Al. Posts: 4,147	Re: 63 C10 SWB Dropmember Build Very cool! I'm looking forward to SEMA & seeing all the great vehicles and the new parts/pieces. __________________ Carter 1968 Chevy SWB Fleet... Walt 1963-1/2 Ford Falcon Futura...Martha

07-22-2015, 08:55 PM	#278
cheessee Registered User Join Date: Jan 2015 Location: Mount Juliet, Tn Posts: 138	Re: 63 C10 SWB Dropmember Build Sema is a blast!! I went in 2012 and can't wait to go back but don't know when __________________ 1963 GMC swb sbw 5.3/4l60e porterbuilt From middle Tennessee 60-66 hood for sale or trade for bench seat rust free nose little pin holes on top message for more details..

07-22-2015, 09:15 PM	#279
northern 85 Registered User Join Date: Mar 2005 Location: Fairfield Maine Posts: 1,759	Re: 63 C10 SWB Dropmember Build Nice score! Nice pic!!

08-06-2015, 01:32 AM	#280
Pro Performance Registered User Join Date: Aug 2010 Location: AZ Posts: 3,069	Re: 63 C10 SWB Dropmember Build Took the hood over to the painter today, to have it matched to the red already on the truck. Just one step closer to finishing it all up. I am having some trouble finding a good way to install the headliner. I don't want to drill holes in the roof, but all adhesive tries, just doesn't work. Plus, with the heat out here, it may not last. I have used the VHB 3M tape, but maybe I need to used more, all around the perimeter.

08-06-2015, 05:54 AM	#281
northern 85 Registered User Join Date: Mar 2005 Location: Fairfield Maine Posts: 1,759	Re: 63 C10 SWB Dropmember Build How about the industrial velcro its really rugged stuff!

08-06-2015, 08:05 AM	#282
chakah Registered User Join Date: Jun 2012 Location: El Paso, Tx. Posts: 283	Re: 63 C10 SWB Dropmember Build I am so jealous Travis. That interior is badass!!! __________________ "El Jerry" '03 3500 Duramax dually '96 1500 ext. cab Chevy '66 swb C-10 '63 Panel '60 VW vert '56 VW vert

08-06-2015, 09:40 AM	#283
aggie91 I'm just glad to be here! Join Date: Jan 2008 Location: Longview, TX Posts: 4,788	Re: 63 C10 SWB Dropmember Build How about attaching some rare earth magnets to the back of the headliner? Like these: http://www.rare-earth-magnets.com/magcraft-nsn0604/ each one as a pull force of 10 lbs for this size, there are others too. These have 18 lbs of pull force each. Apex Magnets seems to have a better selection.. https://www.apexmagnets.com/1-5-x-1-8-disc Both diameter and thickness effect the strength of the magnet. They have a 1.25" dia x .25" thick one that has a 30 lb pull force.... __________________ Karl 1965 Chevy Stepside(Grandpa's Old Blue) and (July 2015 Shop Build!)(2020, the Saga Continues) http://67-72chevytrucks.com/vboard/s...d.php?t=372424 The LST Challenge: http://67-72chevytrucks.com/vboard/s...=1#post7812257 Korbin's 1st Square: "Sunburn" http://67-72chevytrucks.com/vboard/s...d.php?t=418618 1985 GMC Sierra: "White Trash", Korbin's 2nd now... http://67-72chevytrucks.com/vboard/s...d.php?t=632305 Henry - 1984 Chevrolet, Owen's 1st Square

08-09-2015, 05:43 PM	#285
Pro Performance Registered User Join Date: Aug 2010 Location: AZ Posts: 3,069	Re: 63 C10 SWB Dropmember Build Made a lot of progress this weekend as I am getting prepared to leave Friday to start heading to the Goodguys show in northern California. Built it to drive, so that is exactly what I am doing. Was able to get the 1-piece windows in, and also start on the bed wood. I counter sunk the bottom side of the boards, so I can keep the bed bolts hidden underneath. Still have to clear them all for water protection, and should be able to install by Wednesday.

08-09-2015, 09:16 PM	#286
youngrodder Registered User Join Date: Mar 2007 Location: Scotts, Michigan Posts: 3,765	Re: 63 C10 SWB Dropmember Build Looks good Travis....Is that black paint or dark stain on the bed boards??? I like it. Marc __________________ …………...........__________ .................. ((__\|__\|\|___\____ ..;.;;.:;:;.,;..;((_(O))____ (_(O)) 1948 Chevy Truck - Finished SOLD!! 1953 Chevy Suburban "Family Truckster" Completed: Spring of 2021 http://67-72chevytrucks.com/vboard/s...d.php?t=605484 1994 4x4 Blazer - "Field Find" https://67-72chevytrucks.com/vboard/...ferrerid=30857

08-10-2015, 10:25 AM	#288
Twisted78SS Wide n'Low Join Date: Jan 2007 Location: La Center, WA Posts: 1,511	Re: 63 C10 SWB Dropmember Build Looking great!, Can't wait to see some pics of the trip, hope you have a blast.. __________________ Trippin Hazard.. 67 swb, Gold Member.. 68 Suburban Air Force Retired

08-10-2015, 07:24 PM	#289
Stickman Registered User Join Date: Mar 2008 Location: Chandler,AZ Posts: 572	Re: 63 C10 SWB Dropmember Build Looking good Travis , when you took the parts to the prison for PC did that include the frame rails also ?

08-11-2015, 01:14 AM	#291
Captainfab 60-66 Nut Join Date: Mar 2007 Location: Coeur d'Alene, Idaho Posts: 23,246	Re: 63 C10 SWB Dropmember Build Is the one piece side window kit something you sell? __________________ Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE

08-11-2015, 04:23 PM	#293
Justin@EntropyRad Registered User Join Date: Jan 2015 Location: Charlotte, NC Posts: 483	Re: 63 C10 SWB Dropmember Build Truck looks good Travis! __________________ * Call me NOT the website number* Justin Novick (773) 303-8251 Sales/Support Entropy Radiator / Engineered Cooling Products "The Sexiest Radiators For The Sexiest Hot Rods" - www.EntropyRad.com www.speedcooling.com

08-11-2015, 04:46 PM	#295
Pro Performance Registered User Join Date: Aug 2010 Location: AZ Posts: 3,069	Re: 63 C10 SWB Dropmember Build Got started on the bed wood.



Register or Log In To remove these advertisements.

08-11-2015, 06:44 PM	#296
nlped Senior Member Join Date: Jul 2009 Location: Hayden, Al. Posts: 4,147	Re: 63 C10 SWB Dropmember Build Bed floor looks killer! __________________ Carter 1968 Chevy SWB Fleet... Walt 1963-1/2 Ford Falcon Futura...Martha

08-11-2015, 07:51 PM	#297
DaddyOh Registered User Join Date: Jul 2015 Location: Southern California Posts: 180	Re: 63 C10 SWB Dropmember Build Which radiator did you use with the Vortec?

Register or Log In To remove these advertisements.