My Facetruck thread. - Page 123 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**davischevy** · 01-02-2021, 02:54 PM

Man, It's hard to believe some of the stupid things people do. How hard is it to see a school bus, or a kid in the street?

**davischevy** · 01-02-2021, 02:55 PM

Tim is running his post count up again.

'63GENIII · 01-02-2021, 03:20 PM

Quote:

Originally Posted by davischevy

Tim is running his post count up again.

And the gap between the haves and have nots widens...

'63GENIII · 01-02-2021, 03:18 PM

Quote:

Originally Posted by davischevy

Man, It's hard to believe some of the stupid things people do. How hard is it to see a school bus, or a kid in the street?

Be it a school bus or a rolling ball, I'm always on the lookout for kids getting into the street while I'm driving. Bikes too. My kid sister was hit by a car chasing a ball when we were little. Thankfully the driver saw the ball first and slammed on the binders! Just tapped her and knocked her over. Could have been so much worse had he not seen the ball and acted quick!

People need to slow it down, and I'm not just talking about driving.

68Timber · 01-15-2021, 01:55 PM

That's amazing, isn't it? My grandfather had an International Farm-all 200, one of the old red tricycle tractors that were common back when. I saw him start it a few times with the hand crank when the battery was low. He would have loved that set up. It would be interesting to see the engineering behind that and an explanation of how it works. First thought is it must be a lower compression diesel than what we are used to.

dh81k30 · 01-15-2021, 05:01 PM

Quote:

Originally Posted by 68Timber

That's amazing, isn't it? My grandfather had an International Farm-all 200, one of the old red tricycle tractors that were common back when. I saw him start it a few times with the hand crank when the battery was low. He would have loved that set up. It would be interesting to see the engineering behind that and an explanation of how it works. First thought is it must be a lower compression diesel than what we are used to.

check this video

somewhat of a description in the comments section

Wildcat First Shotgun Start - YouTube

**Steeveedee** · 05-22-2021, 11:27 AM

The wife and I took the AMTRAK from LA to Flagstaff, AZ and back when we took a trip to the Grand Canyon. My first and only train ride, if I have anything to say about it. I could sleep OK on a Navy ship in bad seas and/or launching aircraft, but not on that train. Maybe that was because one never gets enough sleep when works in the engine room.

Killer Bee · 05-22-2021, 01:57 PM

been on a few train rides, narrow gauge mountain tours in colorado as a kid, incline railways down the royal gorge and up pikes peak, all lots of fun..

we took the train back to la from kc couple of years ago and it was great, kids had a blast.. 2 rooms across from each other with four beds so everyone could lay down and see out both sides of the train..

took the kids up to oxnard for the polar express train ride year or two ago and it was a lot of fun too..

I love trains, dad had an ho layout and I started at an early age collecting mine.. had a two layer 4x8 table my dad made for me and still have all my engines and cars.. also have some little n gauge stuff left somewhere in those boxes

even still have an old 3 rail a/c lionel set I got when I was around 11-12yo

Killer Bee · 05-22-2021, 02:10 PM

grass is coming up strong

seeded

week 1

week 2

LT7A · 07-03-2021, 10:47 PM

Quote:

Originally Posted by GOPAPA

We had this place of business come to town from North Dakota I believe ..after two years it quit ,,and it's Jimmy Johns that makes sandwiches now

Any one up north of me see any Frugals there?

Didn't make it here,

Attachment 2111755

Did you try it? I just noticed a couple weeks ago that there's one a few towns south of me, and the menu looked pretty good.

**Getter-Done** · 10-30-2021, 10:44 AM

Look what was suggeted for me

1969 Chevy C-30 Dually Wrecker Tow Truck Gulf Oil and Gasoline 1:64 Diecast Greenlight S8E

Link: https://www.facebook.com/marketplace...ting&ref=notif

**davischevy** · 10-30-2021, 08:49 PM

Quote:

Originally Posted by Getter-Done

Look what was suggeted for me

1969 Chevy C-30 Dually Wrecker Tow Truck Gulf Oil and Gasoline 1:64 Diecast Greenlight S8E

Link: https://www.facebook.com/marketplace...ting&ref=notif

I got the same suggestion.

**davischevy** · 11-01-2021, 10:55 AM

Good morning from Santa Fe, NM.

**davischevy** · 06-24-2022, 07:28 PM

Things move slow when you work alone.

**72 tigger** · 06-24-2022, 10:00 PM

Looks like a nice setting

**Getter-Done** · 06-24-2022, 11:08 PM

Quote:

Originally Posted by davischevy

Things move slow when you work alone.

That is when I get the most Done

Killer Bee · 10-04-2022, 04:10 PM

let's facetruckin' into october

**3757chevy** · 10-05-2022, 12:30 AM

Quote:

Originally Posted by Killer Bee

let's facetruckin' into october

He's increasing the value with every gallon he adds.

**special-K** · 10-05-2022, 06:44 AM

Some like the look of pat-ina. This car has pound-tina!

Quote:

Originally Posted by 3757chevy

He's increasing the value with every gallon he adds.

Good one!

His clothes go well with the car color

"HEY! What are you doing?? The manual calls for hi-test!!

01-02-2021, 02:54 PM	#1
davischevy Senior Member Join Date: Sep 2008 Location: Harrison, Arkansas Posts: 9,807	Re: My Facetruck thread. Man, It's hard to believe some of the stupid things people do. How hard is it to see a school bus, or a kid in the street? __________________ other Larry Build thread, Arkansas K10 https://67-72chevytrucks.com/vboard/...=755797&page=5 The ability to speak several languages is an asset, but the ability to keep your mouth shut in any language is priceless.

01-02-2021, 02:55 PM	#2
davischevy Senior Member Join Date: Sep 2008 Location: Harrison, Arkansas Posts: 9,807	Re: My Facetruck thread. Tim is running his post count up again. __________________ other Larry Build thread, Arkansas K10 https://67-72chevytrucks.com/vboard/...=755797&page=5 The ability to speak several languages is an asset, but the ability to keep your mouth shut in any language is priceless.

01-15-2021, 01:55 PM	#5
68Timber I know the pieces fit Join Date: Nov 2007 Location: MONTGOMERY, AL Posts: 5,523	Re: My Facetruck thread. That's amazing, isn't it? My grandfather had an International Farm-all 200, one of the old red tricycle tractors that were common back when. I saw him start it a few times with the hand crank when the battery was low. He would have loved that set up. It would be interesting to see the engineering behind that and an explanation of how it works. First thought is it must be a lower compression diesel than what we are used to. __________________ John 79 2wd Blazer (Bruiser) 85 M1009 Blazer (Sarge) build 74 Honda Z50 build

05-22-2021, 11:27 AM	#7
Steeveedee Who Changed This? Join Date: Jan 2013 Location: Simi Valley, CA Posts: 10,279	Re: My Facetruck thread. The wife and I took the AMTRAK from LA to Flagstaff, AZ and back when we took a trip to the Grand Canyon. My first and only train ride, if I have anything to say about it. I could sleep OK on a Navy ship in bad seas and/or launching aircraft, but not on that train. Maybe that was because one never gets enough sleep when works in the engine room. __________________ ~Steven '70 Chevy 3/4T Longhorn CST 402/400/3.56 Custom Camper Simi Valley, CA

05-22-2021, 01:57 PM	#8
Killer Bee Registered User Join Date: Jan 2016 Location: Barber City, CA Posts: 4,770	Re: My Facetruck thread. been on a few train rides, narrow gauge mountain tours in colorado as a kid, incline railways down the royal gorge and up pikes peak, all lots of fun.. we took the train back to la from kc couple of years ago and it was great, kids had a blast.. 2 rooms across from each other with four beds so everyone could lay down and see out both sides of the train.. took the kids up to oxnard for the polar express train ride year or two ago and it was a lot of fun too.. I love trains, dad had an ho layout and I started at an early age collecting mine.. had a two layer 4x8 table my dad made for me and still have all my engines and cars.. also have some little n gauge stuff left somewhere in those boxes even still have an old 3 rail a/c lionel set I got when I was around 11-12yo __________________ *I started out with nothing - and I still have most of it*

05-22-2021, 02:10 PM	#9
Killer Bee Registered User Join Date: Jan 2016 Location: Barber City, CA Posts: 4,770	Re: My Facetruck thread. grass is coming up strong seeded week 1 week 2 __________________ *I started out with nothing - and I still have most of it*

10-30-2021, 10:44 AM	#11
Getter-Done Senior Member Join Date: Dec 2009 Location: TN. Posts: 7,944	Re: My Facetruck thread. Look what was suggeted for me 1969 Chevy C-30 Dually Wrecker Tow Truck Gulf Oil and Gasoline 1:64 Diecast Greenlight S8E Link: https://www.facebook.com/marketplace...ting&ref=notif __________________ ________________________________________________________________________________________ ____________________________________________ 84 Chevy K-20 63 Impala (my high school car) http://67-72chevytrucks.com/vboard/s...Crew Cab Build

11-01-2021, 10:55 AM	#13
davischevy Senior Member Join Date: Sep 2008 Location: Harrison, Arkansas Posts: 9,807	Re: My Facetruck thread. Good morning from Santa Fe, NM. Attached Images __________________ other Larry Build thread, Arkansas K10 https://67-72chevytrucks.com/vboard/...=755797&page=5 The ability to speak several languages is an asset, but the ability to keep your mouth shut in any language is priceless.

06-24-2022, 07:28 PM	#14
davischevy Senior Member Join Date: Sep 2008 Location: Harrison, Arkansas Posts: 9,807	Re: My Facetruck thread. Things move slow when you work alone. Attached Images __________________ other Larry Build thread, Arkansas K10 https://67-72chevytrucks.com/vboard/...=755797&page=5 The ability to speak several languages is an asset, but the ability to keep your mouth shut in any language is priceless.

06-24-2022, 10:00 PM	#15
72 tigger Senior Member Join Date: Apr 2008 Location: Berne IN Posts: 3,223	Re: My Facetruck thread. Looks like a nice setting __________________ 71 C10 72 K20 72 K10 Super Kirk

10-04-2022, 04:10 PM	#17
Killer Bee Registered User Join Date: Jan 2016 Location: Barber City, CA Posts: 4,770	Re: My Facetruck thread. let's facetruckin' into october __________________ *I started out with nothing - and I still have most of it*



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.