What did you do to your truck today? Chapter II

[RINC]

Got new shoes today and after my nap I woke up to see my new shocks have arrived. I got stuff to install tomorrow

[Elliot949]

got the cab and bed painted on Saturday....

[Possmguts]

Originally Posted by Elliot949

got the cab and bed painted on Saturday....

Looks nice ... how did you get them to stick to the ceiling like that? That would help make more room in my garage if I could do that lol

[Elliot949]

Originally Posted by possmguts

looks nice ... How did you get them to stick to the ceiling like that? That would help make more room in my garage if i could do that lol

lol

[firedemon]

Originally Posted by Possmguts

Looks nice ... how did you get them to stick to the ceiling like that? That would help make more room in my garage if I could do that lol

i was thinking it must be a pain painting from a ladder lol

[Bowtiguy]

If someone would have told me it would 5 days to cut, dado, router, drill, mock up install, reinstall, reinstall then get my custom 68' short wood bed on the frame ( after lifting it off to drill the gas filler hole) i'd say they were crazy. not anymore..

[mud.man.rj]

Well by the looks of it perfection takes a few days, sure looks good.

[JG67]

Originally Posted by Bowtiguy

If someone would have told me it would 5 days to cut, dado, router, drill, mock up install, reinstall, reinstall then get my custom 68' short wood bed on the frame ( after lifting it off to drill the gas filler hole) i'd say they were crazy. not anymore..

Sure looks good though.

[Metaldoc]

Originally Posted by Bowtiguy

If someone would have told me it would 5 days to cut, dado, router, drill, mock up install, reinstall, reinstall then get my custom 68' short wood bed on the frame ( after lifting it off to drill the gas filler hole) i'd say they were crazy. not anymore..

I doing a composite bed as well.

[Possmguts]

Originally Posted by firedemon

i was thinking it must be a pain painting from a ladder lol

lol.. I bet it cuts down on the over spray doing it upside down on the ceiling though

[BugzC10]

Just about to finish new water pump install...waiting on new pepcock, put on upper hose and add 50/50.

[matthamby]

Last night - cleaned out my buddy's garage (moved his jeep out, and equipment) got the C10 on the lift and took wheels off to start replacing brake cylinders, he's going to work on that this week while he is "slow" on other work, hopefully have the exhaust put in this week!

Got my insurance on it this morning and getting ready to head to DMV to get tags - woohoo!

here's some pics of the original bed and tailgate, then the replacement I found for $200!

I didn't realize it had an original wood bed - the plate steel has always been in it as long as I can remember, when we lifted it up to do the brakes, some of the wood fell down, it's almost like one of those house shows where they pull the carpet up and "hey you have wood floors!" - only problem here is that I can't simply remove the covering and be done! My friend said something to me a few weeks ago about how my grandpa put that in, because there was some ply-wood under the steel that was rotted, upon closer inspection last night we realized it wasn't plywood but the original wood floor.

[snipescastle2]

working on an Electric Vacuum Pump install on mine for a solution to the low vacuum due to my "Lumpy" cam.......tested it at work and got 25" of Vacuum...it's off a 2003 Audi A4, some Volkswagen cars had them too....cost me $26.00 at Pick n Pull.
Ben

[Wasted Income]

Re-routed my downpipe

[KEL]

Front springs and shocks. Seperating the
ball joints from the spindles was NOT
easy ! But, its done !

[JG67]

Originally Posted by Wasted Income

Re-routed my downpipe

That's going to be crazy loud! That's BadA$$.

[Wasted Income]

Yea it's pretty loud. I'm gonna make some baffles to slip inside. I drove it around for quite awhile with a very similar setup back when I first got it running.

Turbo LSx K/5 Blazer Idling and 2step - YouTube

[XwalkerX]

oh hell yes!

[DaHos]

Gots wood, doing some ripping today......

[Already Gone]

What did I did to my truck today? Well its like what have I been doing all week. Did some under hood detailing and it was easy with the hood off. Installed my LED plug and play tail lights I bought from Wes at Classic Heartbeat last summer. Realized while poking under the hood my A/C clutch needs replacing
http://67-72chevytrucks.com/vboard/s...d.php?t=706266 Changed my upper tailgate mouldings myself and learned they only go on one way, yes there is a top and bottom to them. I knew the left front fender on the truck had been damaged and discovered it was replaced with used one, but I don't think one from a 72. I'll stop now , but let me say its been a great week and I learned some things about my truck and that I can do things I thought I couldn't.

[palallin]

I removed and reinstalled the ignition switch, which had come loose, making it hard to start (I had to reach under and hold it still to turn the key). I also did a little lubing, so everything works much more betterer.

[In The Ten Ring]

Today I rust treated (NAPA Permatex) my windshield washer bottle bracket, wire wheeled the windshield squirter ends (Permatexed those too), and started doing the same to the tailgate chains.

[Possmguts]

Finally got around to starting the bed... I will be pulling it apart but for now this is what I got done...

[fleetimus]

Tacked oil pump pickup and installed oil pump. (BBC) Was going to install oil pan, one piece gasket ripped. Time for a Bud.

[custom10nut]

I put my new seat belts in today. I've had them for over a year, but now they're in. Also fixed a couple broken springs in my drivers side seat. Now I don't feel like I'm sitting in a padded donut no more. Next, it's on to the dash......