PO has me PO'd - Page 123 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

litebulblsc · 05-22-2019, 08:37 AM

I got rid of my TPI setup and went with a Holley Sniper. I like it.
Might be an option for you?

Looks like someone was a little rough on that heater hose nipple...

**jaros44sr** · 05-22-2019, 11:45 AM

I was looking for the cool factor, but you're right , there maybe better systems out there!

Note the red arrow, cracked intake manifold. That's what happens when you use a tapered easy out, I was able to get a hacksaw blade in there to cut some of the threads and roll back the fitting with a punch. Hopefully I can have it tigged

Just one of my SNAFUs.

on to the shaft bushings for the quadra jet

litebulblsc · 05-23-2019, 08:29 PM

I seen the crack before the arrow. Hopefully it is a simple weld and good to go.

**jaros44sr** · 05-24-2019, 07:48 AM

Installing throttle shaft bushings, grind the staked screws or you WILL snap the heads off. mark blades for location and direction

[url=https://flic.kr/p/2g1QCQu]20190523_093722

**jaros44sr** · 05-24-2019, 08:05 AM

referance pics

[url=https://flic.kr/p/2g1QBNq]20190523_085540

[url=https://flic.kr/p/2g1Rqrf]20190524_070829

Notice 4 snapped screw heads, you would've thought I would have stopped and checked after one

**jaros44sr** · 05-25-2019, 03:18 PM

very little wear on the shafts, can't feel it with your fingernail

[url=https://flic.kr/p/2g2kpzA]20190525_081428

baseplate was cooked in my ultra sonic bath, at low temp, with purple power, changed to aluminum to a slate grey

**jaros44sr** · 05-26-2019, 07:46 AM

[url=https://flic.kr/p/2g2UuTv]20190526_063805

Be careful!, what appears to be a slotted screw is not, just a spring holder in the slot. The silver screw does come off for disasembly. In my application both shafts had to come out for the bushing kit to be used

these shafts are very delicate, so don't force things when you disassemble

**richard2717** · 05-26-2019, 08:21 AM

Still Waaaaay more patience than I have bud. I have none when it comes to carb rebuild or all that wiring you were doing for the other style. I am gritting my teeth not really wanting to do a harness upgrade on my panel even though I know it should be done.

**jaros44sr** · 05-28-2019, 09:21 AM

Quote:

Originally Posted by richard2717

Still Waaaaay more patience than I have bud. I have none when it comes to carb rebuild or all that wiring you were doing for the other style. I am gritting my teeth not really wanting to do a harness upgrade on my panel even though I know it should be done.

patience, is not my problem, 35 years raising a special needs son helps with that! My problem is that I'm a control freak, my other son was going to take it to his shop, finish up and then take it to his buddies shop for the wiring. But, I would not have control of the process along the way. I know my son would do quality work, but after that???

Plus he's trying to paint his house this summer and I don't want to tie up his time...

So, the ball is back in my court and I will continue to muddle along, carb is kinda fun, have an extra carb for reassembly help

Bought the re-bush kit from cliff rugles, plus his forum helps with info......

Thanks for all your help over the years of this build

**jaros44sr** · 06-10-2019, 07:32 AM

[url=https://flic.kr/p/2gadD1T]20190606_162033

shifter is running, just some tuning left

[url=https://flic.kr/p/2gadJmz]20190606_161944

**jaros44sr** · 06-10-2019, 08:37 AM

[url=https://flic.kr/p/2gadJqc]20190606_162049

I just want to get my kicks before the whole sh!t house goes up in flames

litebulblsc · 06-10-2019, 09:40 AM

Is that a 250cc on there?

**jaros44sr** · 06-11-2019, 08:29 AM

Quote:

Originally Posted by litebulblsc

Is that a 250cc on there?

no, just a 125cc, still pretty quick for a 67 year old, with your butt 1" from the ground

**jaros44sr** · 06-19-2019, 06:05 PM

Date with the eleltrical shop, July 8 2019

I give up

litebulblsc · 06-19-2019, 07:32 PM

The kart does look like a blast.

You are going to have them wire up the FAST fuel injection?

**jaros44sr** · 06-21-2019, 07:08 AM

Quote:

Originally Posted by litebulblsc

The kart does look like a blast.

You are going to have them wire up the FAST fuel injection?

yeah, the XIM XFI 2.0 gotta start with at least 12V

[url=https://flic.kr/p/2ghDpBP]20190621_065354

second attempt, maintained with trickle charger for 5 years and battery still failed...trying Genius this time, maintenance charger

I wonder if I can replace bad cell on the old battery

we're still driving on a country road, so I'll have to wait until I can get it on a track to see how it really preforms

**jaros44sr** · 06-21-2019, 07:38 AM

Is a dual battery hold down clamp differant then a single battery hold down clamp

[url=https://flic.kr/p/2ghEj2x]2019-06-21_07-34-16

AJs72K5 · 06-25-2019, 09:28 PM

No way dude. Don't give up on it Jim. I've taken a ridiculous numbers of steps backwards on mine over 11 years. You've done so much. Don't farm it out now. Take a break, come back to it. Keep making progress.

**jaros44sr** · 06-26-2019, 07:07 AM

AJ, thanks for posting up, but time is my constraint, I'm 67 going on 68 in August, and I'm afraid I won't get to drive it much as I get older. So, I've made the choice to get it worked on by someone who understands the system...

For me, it's like putting a string on a yo yo, when you don't know what a string or yo yo is or does, it just doesn't make sense to me, and trust me when I say I've tried, I've sourced, I've read, sourced, and read some more, gleamed thru countless wiring diagrams, to no avail. If someone had done this before, I would have been able to ask questions, but no one has

You've been a great source of info. over the years, and I consider you my friend, sorry to let you down, but it just has to be this way

AJs72K5 · 06-26-2019, 08:58 AM

Quote:

Originally Posted by jaros44sr

AJ, thanks for posting up, but time is my constraint, I'm 67 going on 68 in August, and I'm afraid I won't get to drive it much as I get older. So, I've made the choice to get it worked on by someone who understands the system...

For me, it's like putting a string on a yo yo, when you don't know what a string or yo yo is or does, it just doesn't make sense to me, and trust me when I say I've tried, I've sourced, I've read, sourced, and read some more, gleamed thru countless wiring diagrams, to no avail. If someone had done this before, I would have been able to ask questions, but no one has

You've been a great source of info. over the years, and I consider you my friend, sorry to let you down, but it just has to be this way

Not a let down, my friend. I mean, you're no spring chicken here.

I totally get the aspect of wanting to drive it. Get it done and get in the driver's seat. Keep us posted.

**richard2717** · 06-26-2019, 09:28 AM

Quote:

Originally Posted by jaros44sr

For me, it's like putting a string on a yo yo, when you don't know what a string or yo yo is or does, it just doesn't make sense to me

Come on Jim, I am sure you have a kid close by to help out with the yoyo.

As I told you before you have stuck at it way longer than I would have ever dreamed of doing. I can't say that I would have ever tried it so mad props to you for going as far as you have with it.

**jaros44sr** · 06-28-2019, 07:38 AM

Quote:

Originally Posted by richard2717

Come on Jim, I am sure you have a kid close by to help out with the yoyo.

As I told you before you have stuck at it way longer than I would have ever dreamed of doing. I can't say that I would have ever tried it so mad props to you for going as far as you have with it.

Richard, got the battery hold down yesterday, thank you. Can I at least pay for postage and paint?

BTW, have'nt seen any kids playing with yoyos lately for me to ask, if you do, get me an email addy

[url=https://flic.kr/p/2gmfJPn]20190628_075541

**richard2717** · 06-28-2019, 08:12 AM

[QUOTE=jaros44sr;8549678]Richard, got the battery hold down yesterday, thank you. Can I at least pay for postage and paint?

BTW, have'nt seen any kids playing with yoyos lately for me to ask, if you do, get me an email addy QUOTE]

Jim
Glad it arrived. No need, consider it a small contribution to the build.

TBH I probably would need help with the yoyo nowadays lol

Richard

**jaros44sr** · 06-28-2019, 08:28 AM

Quote:

Originally Posted by AJs72K5

Not a let down, my friend. I mean, you're no spring chicken here.

I totally get the aspect of wanting to drive it. Get it done and get in the driver's seat. Keep us posted.

AJ, your truck looks awesome on the show floor, that was a great deal on the headlights. glad everything worked out on your drive

posted by not a spring chicken, what ever that is

**jaros44sr** · 06-28-2019, 08:34 AM

[quote=richard2717;8549687]

Quote:

Originally Posted by jaros44sr

Richard, got the battery hold down yesterday, thank you. Can I at least pay for postage and paint?

BTW, have'nt seen any kids playing with yoyos lately for me to ask, if you do, get me an email addy QUOTE]

Jim
Glad it arrived. No need, consider it a small contribution to the build.

TBH I probably would need help with the yoyo nowadays lol

Richard

dabbed a little anti sieze on the threads and install, thanks again. we should start a thread, Who has thier OEM duncan yoyo. or do a you tube video on installing string on a yoyo

05-22-2019, 08:37 AM	#3051
litebulblsc Registered User Join Date: Aug 2006 Location: LaSalle Mi Posts: 525	Re: PO has me PO'd I got rid of my TPI setup and went with a Holley Sniper. I like it. Might be an option for you? Looks like someone was a little rough on that heater hose nipple...

05-22-2019, 11:45 AM	#3052
jaros44sr Senior Member Join Date: May 2006 Location: Philadelphia, Pa. 19454 Posts: 9,759	Re: PO has me PO'd I was looking for the cool factor, but you're right , there maybe better systems out there! Note the red arrow, cracked intake manifold. That's what happens when you use a tapered easy out, I was able to get a hacksaw blade in there to cut some of the threads and roll back the fitting with a punch. Hopefully I can have it tigged Just one of my SNAFUs. on to the shaft bushings for the quadra jet __________________ Semper Fi...Uncle Sam, you da man All parts offered to help are free, unless otherwise noted Dont try this stuff in my build thread, unless you have 55 years of mechanical OTJ training SAFETY FIRST AS usual, off topic They say your mind goes second, can't remember the first Jim

05-23-2019, 08:29 PM	#3053
litebulblsc Registered User Join Date: Aug 2006 Location: LaSalle Mi Posts: 525	Re: PO has me PO'd I seen the crack before the arrow. Hopefully it is a simple weld and good to go.

05-24-2019, 07:48 AM	#3054
jaros44sr Senior Member Join Date: May 2006 Location: Philadelphia, Pa. 19454 Posts: 9,759	Re: PO has me PO'd Installing throttle shaft bushings, grind the staked screws or you WILL snap the heads off. mark blades for location and direction [url=https://flic.kr/p/2g1QCQu]20190523_093722 __________________ Semper Fi...Uncle Sam, you da man All parts offered to help are free, unless otherwise noted Dont try this stuff in my build thread, unless you have 55 years of mechanical OTJ training SAFETY FIRST AS usual, off topic They say your mind goes second, can't remember the first Jim

05-24-2019, 08:05 AM	#3055
jaros44sr Senior Member Join Date: May 2006 Location: Philadelphia, Pa. 19454 Posts: 9,759	Re: PO has me PO'd referance pics [url=https://flic.kr/p/2g1QBNq]20190523_085540 [url=https://flic.kr/p/2g1Rqrf]20190524_070829 Notice 4 snapped screw heads, you would've thought I would have stopped and checked after one __________________ Semper Fi...Uncle Sam, you da man All parts offered to help are free, unless otherwise noted Dont try this stuff in my build thread, unless you have 55 years of mechanical OTJ training SAFETY FIRST AS usual, off topic They say your mind goes second, can't remember the first Jim Last edited by jaros44sr; 05-24-2019 at 08:23 AM.

05-25-2019, 03:18 PM	#3056
jaros44sr Senior Member Join Date: May 2006 Location: Philadelphia, Pa. 19454 Posts: 9,759	Re: PO has me PO'd very little wear on the shafts, can't feel it with your fingernail [url=https://flic.kr/p/2g2kpzA]20190525_081428 baseplate was cooked in my ultra sonic bath, at low temp, with purple power, changed to aluminum to a slate grey __________________ Semper Fi...Uncle Sam, you da man All parts offered to help are free, unless otherwise noted Dont try this stuff in my build thread, unless you have 55 years of mechanical OTJ training SAFETY FIRST AS usual, off topic They say your mind goes second, can't remember the first Jim Last edited by jaros44sr; 05-26-2019 at 07:50 AM.

05-26-2019, 07:46 AM	#3057
jaros44sr Senior Member Join Date: May 2006 Location: Philadelphia, Pa. 19454 Posts: 9,759	Re: PO has me PO'd [url=https://flic.kr/p/2g2UuTv]20190526_063805 Be careful!, what appears to be a slotted screw is not, just a spring holder in the slot. The silver screw does come off for disasembly. In my application both shafts had to come out for the bushing kit to be used these shafts are very delicate, so don't force things when you disassemble __________________ Semper Fi...Uncle Sam, you da man All parts offered to help are free, unless otherwise noted Dont try this stuff in my build thread, unless you have 55 years of mechanical OTJ training SAFETY FIRST AS usual, off topic They say your mind goes second, can't remember the first Jim

05-26-2019, 08:21 AM	#3058
richard2717 Equal opportunity joke ofender Join Date: Oct 2011 Location: Eastern Shore of MD Posts: 10,126	Re: PO has me PO'd Still Waaaaay more patience than I have bud. I have none when it comes to carb rebuild or all that wiring you were doing for the other style. I am gritting my teeth not really wanting to do a harness upgrade on my panel even though I know it should be done. __________________ Members I have met. Dually Jams, OlBlue60, ScottH, Tommyboy24, Dujobo, Warbucket, 2003 Silverado, Notsolo, my90k5, 6t727t2, Special-K ,Jack_71C10, tabarcus,72blazer_mud_bogger,pwdcougar,RSavage,EricSean,1Rippen6,invicta455,tennaragtop71,arks, Kendal,Bennett68C10, Perpendicular, Chainsawman, McGeesCustomMinis,ShortbedClayton,longblue72,6768chevylover,Tim71,Travisarmenta,Ol' Drippy,fleetmitch,georgieb51,Dave,bcnya2,Dadsburb https://paypal.me/6772GMtruckparts Most women like the strong, silent type… Fortunately for me, my wife prefers the out-of-shape, mouthy type.

06-10-2019, 07:32 AM	#3060
jaros44sr Senior Member Join Date: May 2006 Location: Philadelphia, Pa. 19454 Posts: 9,759	Re: PO has me PO'd [url=https://flic.kr/p/2gadD1T]20190606_162033 shifter is running, just some tuning left [url=https://flic.kr/p/2gadJmz]20190606_161944 __________________ Semper Fi...Uncle Sam, you da man All parts offered to help are free, unless otherwise noted Dont try this stuff in my build thread, unless you have 55 years of mechanical OTJ training SAFETY FIRST AS usual, off topic They say your mind goes second, can't remember the first Jim

06-10-2019, 08:37 AM	#3061
jaros44sr Senior Member Join Date: May 2006 Location: Philadelphia, Pa. 19454 Posts: 9,759	Re: PO has me PO'd [url=https://flic.kr/p/2gadJqc]20190606_162049 I just want to get my kicks before the whole sh!t house goes up in flames __________________ Semper Fi...Uncle Sam, you da man All parts offered to help are free, unless otherwise noted Dont try this stuff in my build thread, unless you have 55 years of mechanical OTJ training SAFETY FIRST AS usual, off topic They say your mind goes second, can't remember the first Jim

06-10-2019, 09:40 AM	#3062
litebulblsc Registered User Join Date: Aug 2006 Location: LaSalle Mi Posts: 525	Re: PO has me PO'd Is that a 250cc on there?

06-19-2019, 06:05 PM	#3064
jaros44sr Senior Member Join Date: May 2006 Location: Philadelphia, Pa. 19454 Posts: 9,759	Re: PO has me PO'd Date with the eleltrical shop, July 8 2019 I give up __________________ Semper Fi...Uncle Sam, you da man All parts offered to help are free, unless otherwise noted Dont try this stuff in my build thread, unless you have 55 years of mechanical OTJ training SAFETY FIRST AS usual, off topic They say your mind goes second, can't remember the first Jim

06-19-2019, 07:32 PM	#3065
litebulblsc Registered User Join Date: Aug 2006 Location: LaSalle Mi Posts: 525	Re: PO has me PO'd The kart does look like a blast. You are going to have them wire up the FAST fuel injection?

06-21-2019, 07:38 AM	#3067
jaros44sr Senior Member Join Date: May 2006 Location: Philadelphia, Pa. 19454 Posts: 9,759	Re: PO has me PO'd Is a dual battery hold down clamp differant then a single battery hold down clamp [url=https://flic.kr/p/2ghEj2x]2019-06-21_07-34-16 __________________ Semper Fi...Uncle Sam, you da man All parts offered to help are free, unless otherwise noted Dont try this stuff in my build thread, unless you have 55 years of mechanical OTJ training SAFETY FIRST AS usual, off topic They say your mind goes second, can't remember the first Jim

06-25-2019, 09:28 PM	#3068
AJs72K5 Registered User Join Date: Nov 2007 Location: South Tx Posts: 1,083	Re: PO has me PO'd No way dude. Don't give up on it Jim. I've taken a ridiculous numbers of steps backwards on mine over 11 years. You've done so much. Don't farm it out now. Take a break, come back to it. Keep making progress. __________________ - AJ Gray Matter Build - 1972 K5 with some stuff



Register or Log In To remove these advertisements.

06-26-2019, 07:07 AM	#3069
jaros44sr Senior Member Join Date: May 2006 Location: Philadelphia, Pa. 19454 Posts: 9,759	Re: PO has me PO'd AJ, thanks for posting up, but time is my constraint, I'm 67 going on 68 in August, and I'm afraid I won't get to drive it much as I get older. So, I've made the choice to get it worked on by someone who understands the system... For me, it's like putting a string on a yo yo, when you don't know what a string or yo yo is or does, it just doesn't make sense to me, and trust me when I say I've tried, I've sourced, I've read, sourced, and read some more, gleamed thru countless wiring diagrams, to no avail. If someone had done this before, I would have been able to ask questions, but no one has You've been a great source of info. over the years, and I consider you my friend, sorry to let you down, but it just has to be this way __________________ Semper Fi...Uncle Sam, you da man All parts offered to help are free, unless otherwise noted Dont try this stuff in my build thread, unless you have 55 years of mechanical OTJ training SAFETY FIRST AS usual, off topic They say your mind goes second, can't remember the first Jim

06-28-2019, 08:12 AM	#3073
richard2717 Equal opportunity joke ofender Join Date: Oct 2011 Location: Eastern Shore of MD Posts: 10,126	Re: PO has me PO'd [QUOTE=jaros44sr;8549678]Richard, got the battery hold down yesterday, thank you. Can I at least pay for postage and paint? BTW, have'nt seen any kids playing with yoyos lately for me to ask, if you do, get me an email addy QUOTE] Jim Glad it arrived. No need, consider it a small contribution to the build. TBH I probably would need help with the yoyo nowadays lol Richard __________________ Members I have met. Dually Jams, OlBlue60, ScottH, Tommyboy24, Dujobo, Warbucket, 2003 Silverado, Notsolo, my90k5, 6t727t2, Special-K ,Jack_71C10, tabarcus,72blazer_mud_bogger,pwdcougar,RSavage,EricSean,1Rippen6,invicta455,tennaragtop71,arks, Kendal,Bennett68C10, Perpendicular, Chainsawman, McGeesCustomMinis,ShortbedClayton,longblue72,6768chevylover,Tim71,Travisarmenta,Ol' Drippy,fleetmitch,georgieb51,Dave,bcnya2,Dadsburb https://paypal.me/6772GMtruckparts Most women like the strong, silent type… Fortunately for me, my wife prefers the out-of-shape, mouthy type.

Register or Log In To remove these advertisements.