Project Vitamin C-10 - Page 126 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Alan's Classic · 05-29-2011, 08:34 PM

Quote:

Originally Posted by jsmithbm

i was down at Summit today, Now what page was your steering column installation on? Trucks looking good. I hope to see you driving it at the next Chewin Fat.

Do search of this thread, cause I have no clue where anything is.

I hope to have it ready for the Fall Fling. I better get busy.

A big THANKS to Shannon for his help again. It took us about 3.5 hours to get the lift installed. All that is left is wire it up.

daverod · 05-29-2011, 08:39 PM

Damn I'm jealous.

Looks like it belongs there. I'm sure you'll put it to good use.

SFTorange · 05-30-2011, 12:19 AM

Dang, I'm jealous too! Congratulations on the new acquisition! I can't tell you how often I think to myself how much easier things would be with a lift in the garage.

bubba327 · 05-30-2011, 12:39 PM

the lift is looking great, It fits like it belongs there,
If I was closer, I would come help wire it up.

Happy memorial day to all the veterans

1966Stepside · 05-30-2011, 10:30 PM

I definitely like stopping into this thread when I start to lose the interest in working on my truck. Always some good stuff happening in Georgia, and it gets me motivated to make a few more scabs on my knuckles.

Alan's Classic · 05-31-2011, 07:00 PM

Quote:

Originally Posted by daverod

Damn I'm jealous.

Looks like it belongs there. I'm sure you'll put it to good use.

Quote:

Originally Posted by SFTorange

Dang, I'm jealous too! Congratulations on the new acquisition! I can't tell you how often I think to myself how much easier things would be with a lift in the garage.

Quote:

Originally Posted by bubba327

the lift is looking great, It fits like it belongs there,
If I was closer, I would come help wire it up.

Happy memorial day to all the veterans

Quote:

Originally Posted by 1966Stepside

I definitely like stopping into this thread when I start to lose the interest in working on my truck. Always some good stuff happening in Georgia, and it gets me motivated to make a few more scabs on my knuckles.

Thanks guys.

Did I ever tell y'all I'm a idiot.

When we installed the lift the light above the passenger side post just barely cleared. Well today I raised the Miata up almost all the way and the cylinder came out of the top of the post and broke a 8' flourescent. The controls are on that same side. Scared the crap out of me.

Now I need to move the light.

198plus · 05-31-2011, 09:03 PM

Happy Birthday Alan

Cameron 1137 · 05-31-2011, 09:48 PM

Happy Birthday

Have a Beer(or two)!

Strodder · 05-31-2011, 10:06 PM

Great deal on the lift Allan. It's the same one I have. I paid $1500 for it, but it was only a year old. They cost $3,000 new around 10 years ago. Now that you have one, you'll wonder how I ever did without it.
Enjoy!!.

**chevy_man5** · 06-01-2011, 08:18 AM

Happy belated birthday Alan!

Alan's Classic · 06-01-2011, 12:39 PM

Quote:

Originally Posted by 198plus

Happy Birthday Alan

Thanks Ronnie!!

Quote:

Originally Posted by Cameron 1137

Happy Birthday

Have a Beer(or two)!

Thanks, sounds good if I wasn't 5 years sober.

Quote:

Originally Posted by Strodder

Great deal on the lift Allan. It's the same one I have. I paid $1500 for it, but it was only a year old. They cost $3,000 new around 10 years ago. Now that you have one, you'll wonder how I ever did without it.
Enjoy!!.

I still need to sync my cables. The latches aren't clicking at the same time. i know i will enjoy it.

Quote:

Originally Posted by chevy_man5

Happy belated birthday Alan!

This is what my girls made me with my wifes supervision. The "Maters" were really cool.

likaroc13 · 06-01-2011, 12:54 PM

haha, that's cool & looks tasty...hope you had a happy birthday!

shortbed70 · 06-01-2011, 01:25 PM

Happy birthday! Glad the light didn't get ya..
Posted via Mobile Device

my67chevytruck · 06-01-2011, 01:49 PM

awesome Alan, happy belated B-day!.. maybe one day i can get a lift in the shop... some people have all the luck

Strodder · 06-01-2011, 03:30 PM

Quote:

Originally Posted by Alan's Classic

I still need to sync my cables. The latches aren't clicking at the same time. i know i will enjoy it.

This is what my girls made me with my wifes supervision. The "Maters" were really cool.

Happy Birthday Allan.

I didn't see you post it was your Birthday. I thought they were all kidding because you got the lift.

BTW cute cake.

aggie91 · 06-01-2011, 10:20 PM

Happy Birthday Alan!

I have not forgot about you and the linkage. I had some issues with my account lately. I will try in the morning to resolve it.

Those "Maters" do look like they were good!

Alan's Classic · 06-02-2011, 12:30 AM

Quote:

Originally Posted by likaroc13

haha, that's cool & looks tasty...hope you had a happy birthday!

Thanks and yes I had a good day. i spent all day in the shop spring cleaning without interuptions.

Quote:

Originally Posted by shortbed70

Happy birthday! Glad the light didn't get ya..
Posted via Mobile Device

Thanks, me too.

Quote:

Originally Posted by my67chevytruck

awesome Alan, happy belated B-day!.. maybe one day i can get a lift in the shop... some people have all the luck

If I didn't sell my 55 I wouldn't have a lift.

Quote:

Originally Posted by Strodder

Happy Birthday Allan.

I didn't see you post it was your Birthday. I thought they were all kidding because you got the lift.

BTW cute cake.

I didn't post it, Ronnie caught that it was my Bday on facebook.

Quote:

Originally Posted by aggie91

Happy Birthday Alan!

I have not forgot about you and the linkage. I had some issues with my account lately. I will try in the morning to resolve it.

Those "Maters" do look like they were good!

Thanks, no worries on the linkage. It's not going anywhere anytime soon. BTW Mater tasted good.

This is what I did lastnight. I had the inner fenders out under the leantoo and figured either dirt dobers or wasp would start building on them. I wasn't really ready to install them yet. Maybe I won't scratch them. The home made seals against the cab worked great. Also got the front seals in at the radiator support. I never noticed it before, but it looks like the lower inner bolts holes are not in the core support. The core support is a repop. Are there suppose to be holes there? Also started installing the SS hardware with some anti sieze. I also chased the holes with a tap.

Strodder · 06-02-2011, 10:05 AM

I missed it on Face Book also.

56taskforce · 06-02-2011, 10:24 AM

Oh here I am again a day late and a dollor short Happy birthday Alan!!!!
Wow I sure like that lift don't worry about that light you wanted to move it out away from the lift so it dosn't cast a shadow anyway LOL
The truck is looking great as well.

4dranch · 06-02-2011, 07:14 PM

Very cool stuff Alan....And the girls hooked you up on the cakes..Good job girls

Alan's Classic · 06-02-2011, 11:24 PM

Quote:

Originally Posted by Strodder

I missed it on Face Book also.

I miss things all the time. There is too much info available now-a-days.

Quote:

Originally Posted by 56taskforce

Oh here I am again a day late and a dollor short Happy birthday Alan!!!!
Wow I sure like that lift don't worry about that light you wanted to move it out away from the lift so it dosn't cast a shadow anyway LOL
The truck is looking great as well.

Thanks Man!! True I do need to move it, but the bulbs are $15 ea.

Quote:

Originally Posted by 4dranch

Very cool stuff Alan....And the girls hooked you up on the cakes..Good job girls

Thanks David, they did a great job. My present is still in the works. They are getting me some shirts printed up with Alan's Classic on them with the pic below on the back. Black pocket T's with orange graphics and lettering. I thought about an orange graphic with silver lettering. Maybe next time.

I never got a pic of the awards the Buick has won.

I adjusted the cables tonight on the lift and the latches are in sync.

Dinos63 · 06-03-2011, 01:11 AM

man i mis my lift , alan your truck is a work of art my friend

Strodder · 06-03-2011, 10:32 AM

Quote:

Originally Posted by Alan's Classic

I adjusted the cables tonight on the lift and the latches are in sync.

Glad you got it fixed.

56taskforce · 06-03-2011, 10:33 AM

Thanks Man!! True I do need to move it, but the bulbs are $15 ea.

You do know that the 4' light and fixture can be had for less than the price of one 8' bulb don't you.

My shop has all 4's and some times I can get a box of 20 bulbs for $40 at Cosco that is jus t $2ea

65Custom · 06-03-2011, 10:08 PM

Happy belated birthday!!! and congrats on the Lift.

05-29-2011, 08:39 PM	#3127
daverod SSN 706 Join Date: Mar 2009 Location: Pocatello Idaho Posts: 3,821	Re: Project Vitamin C-10 Damn I'm jealous. Looks like it belongs there. I'm sure you'll put it to good use. __________________ Daverods 64 C10 Daily driver 292 3 speed "Driver" Daverods 66 Build C10 Bags 350/350(On Hold) Daverods 52 Build 3100 S10 chassis,Bags, 350/700r4 "Click it"

05-30-2011, 12:19 AM	#3128
SFTorange Registered User Join Date: Apr 2010 Location: Billings, MT Posts: 417	Re: Project Vitamin C-10 Dang, I'm jealous too! Congratulations on the new acquisition! I can't tell you how often I think to myself how much easier things would be with a lift in the garage.

05-30-2011, 12:39 PM	#3129
bubba327 HOW long until spring?? Join Date: Mar 2009 Location: Star Idaho Posts: 1,413	Re: Project Vitamin C-10 the lift is looking great, It fits like it belongs there, If I was closer, I would come help wire it up. Happy memorial day to all the veterans __________________ 69 chevelle convertible 71-C-10 short-wide and low 64 C-10 custom shortbox "Bubba"s Recycling project"

05-30-2011, 10:30 PM	#3130
1966Stepside Registered User Join Date: Feb 2011 Location: North, AL Posts: 135	Re: Project Vitamin C-10 I definitely like stopping into this thread when I start to lose the interest in working on my truck. Always some good stuff happening in Georgia, and it gets me motivated to make a few more scabs on my knuckles. __________________ Truck Pics http://s886.photobucket.com/albums/a...ew%20Purchase/

05-31-2011, 09:03 PM	#3132
198plus Registered User Join Date: May 2009 Location: Loganville, Ga. Posts: 1,408	Re: Project Vitamin C-10 Happy Birthday Alan __________________ My Build http://67-72chevytrucks.com/vboard/s...d.php?t=346597 https://www.facebook.com/pages/198-C...1434001?ref=hl

05-31-2011, 09:48 PM	#3133
Cameron 1137 Registered User Join Date: Feb 2011 Location: Pittsfield, Ma Posts: 497	Re: Project Vitamin C-10 Happy Birthday Have a Beer(or two)! __________________ Cam 1972 Chevy C/10 "Custom Cruiser Project" Build Thread 1961 Olds Super 88 (Daily) 1966 Chevy Corvair 500, "Marigold" SOLD 2005 Subaru Outback Wagon DEAD 2008 Pontiac G8, New Winter/Daily

05-31-2011, 10:06 PM	#3134
Strodder Daring to be Different Join Date: Aug 2008 Location: Hesperia, Ca Posts: 4,499	Re: Project Vitamin C-10 Great deal on the lift Allan. It's the same one I have. I paid $1500 for it, but it was only a year old. They cost $3,000 new around 10 years ago. Now that you have one, you'll wonder how I ever did without it. Enjoy!!. __________________ *Dennis* Check out my 65/73 Cheap Build Thread. http://www.67-72chevytrucks.com/vboa...d.php?t=327644 *KUSTOM RIDES* FACE BOOK PAGE: https://www.facebook.com/groups/291198124258863/ 1965 C-10 Short Bed 350/700r4 2012 Silverado 1500 Crew Cab 2016 Honda Accord w/ 18" rims 2007 Honda Goldwing Trike w/ NAVI 2001 Yamaha Roadstar Indian look alike "Life's journey is not to arrive at the grave safely in a well preserved body, but rather to skid in sideways, totally worn out, shouting "...WOW!...what an amazing ride!" Live Life Passionately!!! [/COLOR] *I AM WE TODD IT, I AM SOFA KING WE TODD IT*

06-01-2011, 08:18 AM	#3135
chevy_man5 GMC's n H.D.'s too! Join Date: Oct 2010 Location: Nampa, Idaho Posts: 1,583	Re: Project Vitamin C-10 Happy belated birthday Alan! __________________ Jason 1960 GMC 4x4 Babe (the Blue Ox) - Build Thread

06-01-2011, 12:54 PM	#3137
likaroc13 Rollin' Old Skool Join Date: Jun 2007 Location: Hattiesburg, MS Posts: 5,371	Re: Project Vitamin C-10 haha, that's cool & looks tasty...hope you had a happy birthday!

06-01-2011, 01:25 PM	#3138
shortbed70 Registered User Join Date: Mar 2002 Location: Forney TX Posts: 4,512	Re: Project Vitamin C-10 Happy birthday! Glad the light didn't get ya.. Posted via Mobile Device __________________ Troy 1965 Chevy Bagged,361 sbc,voodoo cam,1.5 full roller rockers,patriot 185cc vortec heads 2.02-1.60,vortec weiand polished intake,demon carb my truckhttp://67-72chevytrucks.com/vboard/s...d.php?t=332884 Big Red Dog build http://67-72chevytrucks.com/vboard/s...d.php?t=572274

06-01-2011, 01:49 PM	#3139
my67chevytruck Under Construction Join Date: Oct 2007 Location: Midlothian,TX (DFW) Posts: 4,555	Re: Project Vitamin C-10 awesome Alan, happy belated B-day!.. maybe one day i can get a lift in the shop... some people have all the luck __________________ Heath subscribe to the board here: http://67-72chevytrucks.com/vboard/payments.php http://67-72chevytrucks.com/vboard/s...d.php?t=157669 FAQ how to's 1956 Chevy Apache 1967 C10 SWB FleetSide (under construction) 1969 K10 SWB FleetSide (Future Build) 1972 C10 SWB Stepside (Future Build) 56 chevy truck : http://www.cardomain.com/ride/2955823/1 67 truck build: http://www.67-72chevytrucks.com/vboard/showthread.php?t=281357/1 69 k10: http://67-72chevytrucks.com/vboard/s...d.php?t=389470

06-01-2011, 10:20 PM	#3141
aggie91 I'm just glad to be here! Join Date: Jan 2008 Location: Longview, TX Posts: 4,788	Re: Project Vitamin C-10 Happy Birthday Alan! I have not forgot about you and the linkage. I had some issues with my account lately. I will try in the morning to resolve it. Those "Maters" do look like they were good! __________________ Karl 1965 Chevy Stepside(Grandpa's Old Blue) and (July 2015 Shop Build!)(2020, the Saga Continues) http://67-72chevytrucks.com/vboard/s...d.php?t=372424 The LST Challenge: http://67-72chevytrucks.com/vboard/s...=1#post7812257 Korbin's 1st Square: "Sunburn" http://67-72chevytrucks.com/vboard/s...d.php?t=418618 1985 GMC Sierra: "White Trash", Korbin's 2nd now... http://67-72chevytrucks.com/vboard/s...d.php?t=632305 Henry - 1984 Chevrolet, Owen's 1st Square

06-02-2011, 10:05 AM	#3143
Strodder Daring to be Different Join Date: Aug 2008 Location: Hesperia, Ca Posts: 4,499	Re: Project Vitamin C-10 I missed it on Face Book also. __________________ *Dennis* Check out my 65/73 Cheap Build Thread. http://www.67-72chevytrucks.com/vboa...d.php?t=327644 *KUSTOM RIDES* FACE BOOK PAGE: https://www.facebook.com/groups/291198124258863/ 1965 C-10 Short Bed 350/700r4 2012 Silverado 1500 Crew Cab 2016 Honda Accord w/ 18" rims 2007 Honda Goldwing Trike w/ NAVI 2001 Yamaha Roadstar Indian look alike "Life's journey is not to arrive at the grave safely in a well preserved body, but rather to skid in sideways, totally worn out, shouting "...WOW!...what an amazing ride!" Live Life Passionately!!! [/COLOR] *I AM WE TODD IT, I AM SOFA KING WE TODD IT*

06-02-2011, 10:24 AM	#3144
56taskforce Registered User Join Date: Feb 2011 Location: Roy, WA. Posts: 77	Re: Project Vitamin C-10 Oh here I am again a day late and a dollor short Happy birthday Alan!!!! Wow I sure like that lift don't worry about that light you wanted to move it out away from the lift so it dosn't cast a shadow anyway LOL The truck is looking great as well.

06-02-2011, 07:14 PM	#3145
4dranch Shloooooong bed member #2 Join Date: Aug 2008 Location: Millington Tn. Posts: 1,864	Re: Project Vitamin C-10 Very cool stuff Alan....And the girls hooked you up on the cakes..Good job girls



Register or Log In To remove these advertisements.

06-03-2011, 01:11 AM	#3147
Dinos63 chevy only Join Date: Sep 2006 Location: Phoenix, AZ Posts: 6,619	Re: Project Vitamin C-10 man i mis my lift , alan your truck is a work of art my friend __________________ CHEVY ONLY... Nothin Else !

06-03-2011, 10:33 AM	#3149
56taskforce Registered User Join Date: Feb 2011 Location: Roy, WA. Posts: 77	Re: Project Vitamin C-10 Thanks Man!! True I do need to move it, but the bulbs are $15 ea. You do know that the 4' light and fixture can be had for less than the price of one 8' bulb don't you. My shop has all 4's and some times I can get a box of 20 bulbs for $40 at Cosco that is jus t $2ea

06-03-2011, 10:08 PM	#3150
65Custom Registered User Join Date: Apr 2009 Location: Dawson, Ga Posts: 490	Re: Project Vitamin C-10 Happy belated birthday!!! and congrats on the Lift. __________________ My Build Thread http://67-72chevytrucks.com/vboard/s...d.php?t=366677 I must be

Register or Log In To remove these advertisements.