What did you do to your truck today! - Page 127 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Rifleman · 01-11-2012, 08:24 PM

Got the Christmas present from my wife installed, along with a new speaker in the original dash location.

aventur1 · 01-11-2012, 08:50 PM

Nice radio...good job

Indyuke · 01-12-2012, 09:46 PM

Finally put in my new carpet the wife got me for Christmas!!! I also put down some sound dampener, took the gas tank out to clean it and replaced the cab mounts.

Before:

During:

After:

dukcaln · 01-12-2012, 10:22 PM

got the tail light trim and bottom of tailgate trim back on...just need to finish top of tailgate... ran out of sun shine.... after that the tach goes in... then the stereo and carpet and we are done.... time for the 16 year old to start driving it to school....

**FRENCHBLUE72** · 01-12-2012, 10:29 PM

Pulled the bed off and finally put the truck up on car dollys..

Baggerjohn · 01-13-2012, 12:12 AM

I am trying to figure out how to install my new seats in my truck. I bought new leather seats. They are the second row out of a new Honda Odyssey. If anyone has any information on how to attach these, I would really appreciate it. They have hooks on the rear portion of the seats and slots in front. Help. Thanks much.

mud.man.rj · 01-13-2012, 12:18 AM

I have used my old seat brackets and just redrilled them to fit the new seat but that worked for me on my seat, may not be as easy on yours.

**youngrodder** · 01-13-2012, 10:17 AM

Quote:

Originally Posted by Baggerjohn

I am trying to figure out how to install my new seats in my truck. I bought new leather seats. They are the second row out of a new Honda Odyssey. If anyone has any information on how to attach these, I would really appreciate it. They have hooks on the rear portion of the seats and slots in front. Help. Thanks much.

It might be easier to just cut off the original mounting hooks and tabs and remake your own mounts. I have done it many times, it is not all that difficult.

Good luck
Marc

ItsRandy · 01-15-2012, 01:48 AM

I painted my bed and installed a drop down battery box.

Dano69c10 · 01-15-2012, 02:00 AM

Quote:

Originally Posted by ItsRandy

I painted my bed and installed a drop down battery box.

I knew all that sanding would pay off.
Paint job looks really good!
Dano

ItsRandy · 01-16-2012, 03:13 PM

Quote:

Originally Posted by Dano69c10

I knew all that sanding would pay off.
Paint job looks really good!
Dano

Thanks Dano. It's my first time (trying to look all shy and stuff) so it's been kinda' scary.

chevytruckluver · 01-15-2012, 02:02 AM

Picked up the cab from the body shop, got it to bubba's and we sat it on the frame. looks good huh?

chevytruckluver · 01-15-2012, 02:04 AM

Quote:

Originally Posted by ItsRandy

I painted my bed and installed a drop down battery box.

Looks great Randy,
do you have any pics or other info on the battery box you installed?

Bennett68C10 · 01-15-2012, 10:30 AM

Did some more work on my doors. First pic is of Passenger door after spraying boom mat on. I had already sprayed rust converter, rust encapsulator and bedliner before the boom mat. Now its ready for the skin to go on.

Next couple of pics are of the rust work on the Drivers side door. Replaced the inner door bottoms, fixed the rusted out upper hinge area and fixed the upper part of the door on the latch side.

**leddzepp** · 01-19-2012, 08:22 PM

Quote:

Originally Posted by ItsRandy

I painted my bed and installed a drop down battery box.

Dang that looks great Randy! Man, you are going to town on that truck...you have accomplished more in a week than most "body shops" accomplish on a truck in 6 months.
Posted via Mobile Device

ItsRandy · 01-20-2012, 01:39 AM

Quote:

Originally Posted by leddzepp

Dang that looks great Randy! Man, you are going to town on that truck...you have accomplished more in a week than most "body shops" accomplish on a truck in 6 months.
Posted via Mobile Device

Thanks Scott. Only 2 doors, 2 fenders, a hood and a tailgate left to sand and paint. I've started on the doors. Oh yeah...and 2 wheel houses.

Ms 69 longbed · 01-15-2012, 04:10 PM

yoohooo, got new HEI distributer and yellow wires installed, took out the old air conditioning pump and hoses while we were working in the engine compartment yesterday. next item on honey do list .... rear leaf spring bushings and u bolts

LadyBird · 01-15-2012, 05:18 PM

Finally started mine for the first time

Ignore the bad starter solenoid in the beginning, lol. I'm the dork running around in the hat haha. Now that she runs/drives, i can get her ready for spring.

http://www.youtube.com/watch?v=O4XUtX416wo&context...

dukcaln · 01-15-2012, 09:00 PM

what do you have for exhaust on that thing lady bird

Quote:

Originally Posted by LadyBird

Finally started mine for the first time

Ignore the bad starter solenoid in the beginning, lol. I'm the dork running around in the hat haha. Now that she runs/drives, i can get her ready for spring.

http://www.youtube.com/watch?v=O4XUt...obKJoHlbGEDhvM

LadyBird · 01-16-2012, 12:57 PM

Quote:

Originally Posted by dukcaln

what do you have for exhaust on that thing lady bird

None right now...

elf w/capital T · 01-15-2012, 06:07 PM

hell yeah i cant wait to start mine up again. just threw on the new performer intake and 650 carbourator and the old filter, i have a 9inch filter on its way

kcsa75 · 01-15-2012, 08:59 PM

Took advantage of the break in the weather to fix a couple of things and change the oil. Figured as long as I was at it, I would install the new radio antenna that I bought a while back.
I got the cowl off, new antenna install installed and the wire run though the firewall. All I had left to do was plug it into the back of the radio and I'd be done.

Three hours later....

dukcaln · 01-15-2012, 09:02 PM

all the trim is finally on, cleaned the inside to get ready for carpet and sound barrier. adjusted the carb.... and some other small tinkering... next the tach and stereo

mcmlxix · 01-15-2012, 09:04 PM

Put some white grease on the wing windows... wow what a difference...

I think I stopped a horrible squeek.. The passenger side latch on the Blazer hatch has broken fiberglass and I htink that was the casue.. I just put a screw in it so it can't move...

MONTE · 01-16-2012, 04:07 PM

Installed an overflow tank for the radiator. I got it at Autozone.

01-11-2012, 08:24 PM	#1
Rifleman Registered User Join Date: Nov 2011 Location: Gold Country, CA Posts: 29	Re: What did you do to your truck today! Got the Christmas present from my wife installed, along with a new speaker in the original dash location. Attached Images

01-11-2012, 08:50 PM	#2
aventur1 Registered User Join Date: Aug 2007 Location: Boise, Idaho Posts: 676	Re: What did you do to your truck today! Nice radio...good job

01-12-2012, 09:46 PM	#3
Indyuke Registered User Join Date: Feb 2008 Location: Lake Stevens, WA Posts: 623	Re: What did you do to your truck today! Finally put in my new carpet the wife got me for Christmas!!! I also put down some sound dampener, took the gas tank out to clean it and replaced the cab mounts. Before: During: After:

01-12-2012, 10:22 PM	#4
dukcaln Registered User Join Date: Jul 2011 Location: vacaville ca Posts: 1,304	Re: What did you do to your truck today! got the tail light trim and bottom of tailgate trim back on...just need to finish top of tailgate... ran out of sun shine.... after that the tach goes in... then the stereo and carpet and we are done.... time for the 16 year old to start driving it to school.... __________________ 04 CHEVY LLY LS DURAMAX 4WD. MODS TO FOLLOW, EFI LIVE, BUILT TRANS, LBZ MP, LIFT PUMP *SOLD* 1972 chevy c10

01-12-2012, 10:29 PM	#5
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,608	Re: What did you do to your truck today! Pulled the bed off and finally put the truck up on car dollys.. __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

01-13-2012, 12:12 AM	#6
Baggerjohn Registered User Join Date: Jan 2011 Location: Bullhead City, AZ Posts: 60	Re: What did you do to your truck today! I am trying to figure out how to install my new seats in my truck. I bought new leather seats. They are the second row out of a new Honda Odyssey. If anyone has any information on how to attach these, I would really appreciate it. They have hooks on the rear portion of the seats and slots in front. Help. Thanks much. __________________ "Arrive, Raise Hell, Create Confusion, Leave".

01-13-2012, 12:18 AM	#7
mud.man.rj Registered User Join Date: Dec 2011 Location: Creighton Sask. Canada Posts: 4,121	Re: What did you do to your truck today! I have used my old seat brackets and just redrilled them to fit the new seat but that worked for me on my seat, may not be as easy on yours.

01-15-2012, 01:48 AM	#9
ItsRandy Registered User Join Date: Nov 2010 Location: Grand Terrace, Ca. Posts: 1,607	Re: What did you do to your truck today! I painted my bed and installed a drop down battery box. Attached Images

01-15-2012, 02:02 AM	#12
chevytruckluver Eat, Sleep, Drive a Chevy Join Date: Apr 2010 Location: the town of the cow, Texas Posts: 1,152	Re: What did you do to your truck today! Picked up the cab from the body shop, got it to bubba's and we sat it on the frame. looks good huh? Attached Images __________________ Trey Silence may be Golden, but Duct Tape is Silver! 72 Short Step 57 "big window" short step

01-15-2012, 10:30 AM	#14
Bennett68C10 Registered User Join Date: Dec 2006 Location: Toms River, NJ Posts: 5,518	Re: What did you do to your truck today! Did some more work on my doors. First pic is of Passenger door after spraying boom mat on. I had already sprayed rust converter, rust encapsulator and bedliner before the boom mat. Now its ready for the skin to go on. Next couple of pics are of the rust work on the Drivers side door. Replaced the inner door bottoms, fixed the rusted out upper hinge area and fixed the upper part of the door on the latch side. Attached Images __________________ Keith 66 Suburban Burb Build Thread: http://67-72chevytrucks.com/vboard/s...d.php?t=751361 IG: bennett68c10

01-15-2012, 04:10 PM	#17
Ms 69 longbed Registered User Join Date: Sep 2011 Location: N. Calif. Posts: 9	Re: What did you do to your truck today! yoohooo, got new HEI distributer and yellow wires installed, took out the old air conditioning pump and hoses while we were working in the engine compartment yesterday. next item on honey do list .... rear leaf spring bushings and u bolts __________________ 1969 GMC Custom Camper 1995 GMC Jimmy 4wd 2k Suzuki LC1500

01-15-2012, 06:07 PM	#21
elf w/capital T Registered User Join Date: Feb 2011 Location: North Carolina Posts: 993	Re: What did you do to your truck today! hell yeah i cant wait to start mine up again. just threw on the new performer intake and 650 carbourator and the old filter, i have a 9inch filter on its way

01-15-2012, 08:59 PM	#22
kcsa75 Registered User Join Date: Oct 2010 Location: Kansas City Posts: 3,590	Re: What did you do to your truck today! Took advantage of the break in the weather to fix a couple of things and change the oil. Figured as long as I was at it, I would install the new radio antenna that I bought a while back. I got the cowl off, new antenna install installed and the wire run though the firewall. All I had left to do was plug it into the back of the radio and I'd be done. Three hours later.... __________________ Willie Swamp Angel Truckers '72 C10 Highlander *People who blindly follow a GPS end up on television programs on The Weather Channel. Some survive, some don't.*

01-15-2012, 09:02 PM	#23
dukcaln Registered User Join Date: Jul 2011 Location: vacaville ca Posts: 1,304	Re: What did you do to your truck today! all the trim is finally on, cleaned the inside to get ready for carpet and sound barrier. adjusted the carb.... and some other small tinkering... next the tach and stereo __________________ 04 CHEVY LLY LS DURAMAX 4WD. MODS TO FOLLOW, EFI LIVE, BUILT TRANS, LBZ MP, LIFT PUMP *SOLD* 1972 chevy c10

01-15-2012, 09:04 PM	#24
mcmlxix Collector of Projects Join Date: Apr 2003 Location: Las Vegas Posts: 3,106	Re: What did you do to your truck today! Put some white grease on the wing windows... wow what a difference... I think I stopped a horrible squeek.. The passenger side latch on the Blazer hatch has broken fiberglass and I htink that was the casue.. I just put a screw in it so it can't move... __________________ Rich 1972 K5 Blazer CST Click HERE D60 BIG BRAKE UPGRADE Click HERE



Register or Log In To remove these advertisements.

01-16-2012, 04:07 PM	#25
MONTE Registered User Join Date: Oct 2005 Location: Donna, Texas Posts: 286	Re: What did you do to your truck today! Installed an overflow tank for the radiator. I got it at Autozone.

Register or Log In To remove these advertisements.