PO has me PO'd - Page 129 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

litebulblsc · 12-23-2019, 06:57 PM

In case someone does not realize, the last 2 "pictures" are actually videos. You have to click on them.

Cool to see it running.

**jaros44sr** · 01-30-2020, 03:05 PM

[url=https://flic.kr/p/2in4NNi]20200130_132152

recieved new rotors from rock auto part #5020 had them pressed off and new pressed on, now to reinstall hub, only problem duplicate shipment, may put up on parts board

**DeadheadNM** · 01-30-2020, 04:26 PM

Nice! I have that same canvas tool bag - picked it up over 30 y ago.

**jaros44sr** · 01-31-2020, 11:53 AM

Quote:

Originally Posted by DeadheadNM

Nice! I have that same canvas tool bag - picked it up over 30 y ago.

Bag works great for road trips, no rusty bottom. I may have had it just as long as you have, still have my duffel bag, that thing has some miles on it

I think my tool bag was first used by the medics in my MC days

Congrats on your newest award, TOTY

**jaros44sr** · 01-31-2020, 03:45 PM

[url=https://flic.kr/p/2insGdy]20200131_141700

Front hub is disassembled. light rust removed, gave it a couple coats of grease and bees wax, the one you buy at the hardware store (toilet seal ring)

I don't want to take it to far apart, but I don't want it to rust much more, so I use a coating of wax and grease

PO was in here before me, screwed up the bearing races slightly

**jaros44sr** · 02-02-2020, 11:45 AM

[url=https://flic.kr/p/2iocEVN]20200202_103648

Not sure if you can see it, but the PO was in here grinding on the bearing seat. some people shouldn't have tools

**jaros44sr** · 02-04-2020, 08:11 PM

[url=https://flic.kr/p/2ipbQKQ]20200204_110121

This maybe my most useful tool yet, worked great for seeing inside hub to align locking rings and plate

**jaros44sr** · 02-04-2020, 08:16 PM

[url=https://flic.kr/p/2ipaLKM]20200204_104401

[url=https://flic.kr/p/2ipaLL8]20200204_104442

when you first take the hub apart, check to see if the threads are in good shape. Nothing worst then cross threading these retaining nuts

As you can see, the PO didn't have the proper tool, so he just used a punch, damaging the outer locking nut

Not shone, a plate that sits on the bearing, supports the spring for the locking hub

**jaros44sr** · 02-04-2020, 08:31 PM

[url=https://flic.kr/p/2ipaLSf]20200204_110149

If the slot is at 12 o'clock, then my pin is at 11:50

put a lttle grease on it so it won't fall off as you're trying to assemble

**jaros44sr** · 02-05-2020, 06:47 PM

[url=https://flic.kr/p/2ipxJQk]20200205_13011

caliper mounted, looked every where for new mounting bolts and used bolts, but all I could find were chinese knockoffs, any ideas would be helpful?

[url=https://flic.kr/p/2ipvbiH]20200205_130217

not sure on these brake pad retaining clips, are they just for assembly or do they stay on?

so, after talking to Wes, he has used the after market ones with success, just ordered from Rock Auto we'll see friday

**jaros44sr** · 02-07-2020, 02:20 PM

[url=https://flic.kr/p/2iqkSZE]20200207_124548

stub axle? wanted to move in about 3/8" making it difficult to get the snap ring seated, found a bolt with fine threads that would grab it, allowing me to pull out

finished lock out, may send chrome cover out to get replated, only fugley piece of the whole system
Deadhead Minn. seems to have a good source

[url=https://flic.kr/p/2iqmcid]20200207_130214

**jaros44sr** · 02-07-2020, 02:48 PM

after thought, I think I read somewhere maybe Special K, that you should only use a light oil on this step of the reassembly, as grease is to heavy and sticky to allow proper function of the lock out

**richard2717** · 02-07-2020, 03:12 PM

Quote:

Originally Posted by jaros44sr

after thought, I think I read somewhere maybe Special K, that you should only use a light oil on this step of the reassembly, as grease is to heavy and sticky to allow proper function of the lock out

I think that is correct. I do remember 1st time I pulled hubs on the 69 I had at the time, I greased the lockouts when I put them back together and 1st time I needed them could not get them to lock in.

**jaros44sr** · 02-07-2020, 08:20 PM

[url=https://flic.kr/p/2iqsVRH]20200207_191431

As Wes said, these caliper bolts are a direct replacement, except bolt head size

Thanks Richard for confirming that, still have that piece for the heater shroud, just been to busy to ship

**jaros44sr** · 02-25-2020, 01:12 PM

Attempting to bench bleed my M/C, bought some metal pre flared tubing from NAPA (7/16 and !/2") just bent by hand to circle back into m/c chambers

never tried this method before, so we'll see how it goes. Videos on line show it just leaking out of the ports. as long as the tubes are below the fluid level in the chambers I think this will work

still have to build a bracket to keep the plunger from moving

[url=https://flic.kr/p/2ixAC1R]20200225_112606

**jaros44sr** · 02-26-2020, 11:51 AM

[url=https://flic.kr/p/2ixXmGx]20200226_103820

Seems like this method worked, just loosened up the three bolts, 1 for the M/C bolt and 2 for the prop valve, so I could start the fittings by hand, nothing worse than cross threading fittings at this point!!

Now onto the bleeders

Thinking of supporting the safety pin on the prop valve, so it doesn't slide open, but can't think of a way yet

Forgot to mention that I pushed on the pedal when the recirculating pipes were in place, seemed to get the air out

This old coating from eastwood seems to be impervious from brake fluid

**jaros44sr** · 02-28-2020, 05:36 PM

[url=https://flic.kr/p/2iyEDaq]20200228_102124

I've got brakes....

Not overly impressed with my chinese knockoff of a mighty vac. Zero setting was off by 4 inches of vacuum, fitting were a bit large to seal on the bleeder. I worked around them

Pumped it up to 25 inches, opened up the bleeder, and sucked fluid into the container. CAREFUL, the back chamber on the M/C is very small. On first pull, you can empty it quickly, after that you can fill up the cannister 1/2 way, before the chamber needs fluid

I bleed it down till I have about 10 inches then shut off bleeder

Great method for a one man bleeder

**jaros44sr** · 03-02-2020, 08:19 AM

[url=https://flic.kr/p/2izHniz]20200302_070417

[url=https://flic.kr/p/2izMjEz]20200302_070442

Just B/C you can , doesn't mean you should, but I like it, and it's mine

**raggedjim** · 03-02-2020, 10:44 AM

Quote:

Originally Posted by jaros44sr

[url=https://flic.kr/p/2izHniz][img]

Just B/C you can , doesn't mean you should, but I like it, and it's mine

You know that will one day be in a "P.O." thread!

I like it, Rg

**jaros44sr** · 03-04-2020, 09:52 AM

[url=https://flic.kr/p/2iAuDwb]20200304_082509

Yeah, Rg, I find it ironic that this is in my own PO has me PO'd thread, but I want people to know I am making a left hand turn

**raggedjim** · 03-09-2020, 10:08 AM

I like the symmetry of it.

Rg

**jaros44sr** · 03-09-2020, 07:55 PM

Quote:

Originally Posted by raggedjim

I like the symmetry of it.

Rg

Thanks Roger, that is the word I was looking for and it fits, plus it can easily be undone done the road if the post owner doesn't like it

**jaros44sr** · 03-11-2020, 11:49 AM

[url=https://flic.kr/p/2iDgNHK]20200311_104331

Trying to hook up my vacuum gauge, needed to find a coupling that would fit the adapter on the gauge. Home depot had this kit available

**jaros44sr** · 03-11-2020, 12:08 PM

my vacuum gauge on the pump is about 5 inches off

[url=https://flic.kr/p/2iDd3L8]20200311_110422

BTW, I want to thank Harlowhead for sending me the female electrical connecter for the harness coming off of my steering column free of charge, not even shipping, what a good member. Things like that make this the best board on the net

Thank you Harlowhead!!!!!

**jaros44sr** · 04-22-2020, 09:07 AM

started on exhaust, gathered parts from NAPA

[url=https://flic.kr/p/2iLbwrA]20200402_081202

12-23-2019, 06:57 PM	#3201
litebulblsc Registered User Join Date: Aug 2006 Location: LaSalle Mi Posts: 520	Re: PO has me PO'd In case someone does not realize, the last 2 "pictures" are actually videos. You have to click on them. Cool to see it running.

01-30-2020, 03:05 PM	#3202
jaros44sr Senior Member Join Date: May 2006 Location: Philadelphia, Pa. 19454 Posts: 9,709	Re: PO has me PO'd [url=https://flic.kr/p/2in4NNi]20200130_132152 recieved new rotors from rock auto part #5020 had them pressed off and new pressed on, now to reinstall hub, only problem duplicate shipment, may put up on parts board __________________ Semper Fi...Uncle Sam, you da man All parts offered to help are free, unless otherwise noted Dont try this stuff in my build thread, unless you have 55 years of mechanical OTJ training SAFETY FIRST AS usual, off topic They say your mind goes second, can't remember the first Jim

01-30-2020, 04:26 PM	#3203
DeadheadNM Carpe manana Join Date: Dec 2010 Location: Eau Claire, WI Posts: 12,428	Re: PO has me PO'd Nice! I have that same canvas tool bag - picked it up over 30 y ago. __________________ 1972 K5 CST Highlander Blazer: http://67-72chevytrucks.com/vboard/s...d.php?t=708547 1972 K20 Cheyenne Super: http://67-72chevytrucks.com/vboard/s...d.php?t=528308 Members met: ORANGBLAZ, 2003 silverado, MikeCofield, BB72CHEVKT, Duncan&Son, Sameyrasmea72, THENEWMEXICAN, HotRod C/10, brianthelion02, Sport/Truck, ryanroo, michael bustamante, Dirt's72, Already Gone, WestButteTruck, 57taskforce, Moreyel, painterljp, AASmedic, SoCoC10, Lumaestas, carbuff382, Chevyland

01-31-2020, 03:45 PM	#3205
jaros44sr Senior Member Join Date: May 2006 Location: Philadelphia, Pa. 19454 Posts: 9,709	Re: PO has me PO'd [url=https://flic.kr/p/2insGdy]20200131_141700 Front hub is disassembled. light rust removed, gave it a couple coats of grease and bees wax, the one you buy at the hardware store (toilet seal ring) I don't want to take it to far apart, but I don't want it to rust much more, so I use a coating of wax and grease PO was in here before me, screwed up the bearing races slightly __________________ Semper Fi...Uncle Sam, you da man All parts offered to help are free, unless otherwise noted Dont try this stuff in my build thread, unless you have 55 years of mechanical OTJ training SAFETY FIRST AS usual, off topic They say your mind goes second, can't remember the first Jim

02-02-2020, 11:45 AM	#3206
jaros44sr Senior Member Join Date: May 2006 Location: Philadelphia, Pa. 19454 Posts: 9,709	Re: PO has me PO'd [url=https://flic.kr/p/2iocEVN]20200202_103648 Not sure if you can see it, but the PO was in here grinding on the bearing seat. some people shouldn't have tools __________________ Semper Fi...Uncle Sam, you da man All parts offered to help are free, unless otherwise noted Dont try this stuff in my build thread, unless you have 55 years of mechanical OTJ training SAFETY FIRST AS usual, off topic They say your mind goes second, can't remember the first Jim

02-04-2020, 08:11 PM	#3207
jaros44sr Senior Member Join Date: May 2006 Location: Philadelphia, Pa. 19454 Posts: 9,709	Re: PO has me PO'd [url=https://flic.kr/p/2ipbQKQ]20200204_110121 This maybe my most useful tool yet, worked great for seeing inside hub to align locking rings and plate __________________ Semper Fi...Uncle Sam, you da man All parts offered to help are free, unless otherwise noted Dont try this stuff in my build thread, unless you have 55 years of mechanical OTJ training SAFETY FIRST AS usual, off topic They say your mind goes second, can't remember the first Jim Last edited by jaros44sr; 02-04-2020 at 08:19 PM.

02-04-2020, 08:16 PM	#3208
jaros44sr Senior Member Join Date: May 2006 Location: Philadelphia, Pa. 19454 Posts: 9,709	Re: PO has me PO'd [url=https://flic.kr/p/2ipaLKM]20200204_104401 [url=https://flic.kr/p/2ipaLL8]20200204_104442 when you first take the hub apart, check to see if the threads are in good shape. Nothing worst then cross threading these retaining nuts As you can see, the PO didn't have the proper tool, so he just used a punch, damaging the outer locking nut Not shone, a plate that sits on the bearing, supports the spring for the locking hub __________________ Semper Fi...Uncle Sam, you da man All parts offered to help are free, unless otherwise noted Dont try this stuff in my build thread, unless you have 55 years of mechanical OTJ training SAFETY FIRST AS usual, off topic They say your mind goes second, can't remember the first Jim Last edited by jaros44sr; 02-04-2020 at 08:25 PM.

02-04-2020, 08:31 PM	#3209
jaros44sr Senior Member Join Date: May 2006 Location: Philadelphia, Pa. 19454 Posts: 9,709	Re: PO has me PO'd [url=https://flic.kr/p/2ipaLSf]20200204_110149 If the slot is at 12 o'clock, then my pin is at 11:50 put a lttle grease on it so it won't fall off as you're trying to assemble __________________ Semper Fi...Uncle Sam, you da man All parts offered to help are free, unless otherwise noted Dont try this stuff in my build thread, unless you have 55 years of mechanical OTJ training SAFETY FIRST AS usual, off topic They say your mind goes second, can't remember the first Jim

02-05-2020, 06:47 PM	#3210
jaros44sr Senior Member Join Date: May 2006 Location: Philadelphia, Pa. 19454 Posts: 9,709	Re: PO has me PO'd [url=https://flic.kr/p/2ipxJQk]20200205_13011 caliper mounted, looked every where for new mounting bolts and used bolts, but all I could find were chinese knockoffs, any ideas would be helpful? [url=https://flic.kr/p/2ipvbiH]20200205_130217 not sure on these brake pad retaining clips, are they just for assembly or do they stay on? so, after talking to Wes, he has used the after market ones with success, just ordered from Rock Auto we'll see friday __________________ Semper Fi...Uncle Sam, you da man All parts offered to help are free, unless otherwise noted Dont try this stuff in my build thread, unless you have 55 years of mechanical OTJ training SAFETY FIRST AS usual, off topic They say your mind goes second, can't remember the first Jim Last edited by jaros44sr; 02-05-2020 at 07:24 PM.

02-07-2020, 02:20 PM	#3211
jaros44sr Senior Member Join Date: May 2006 Location: Philadelphia, Pa. 19454 Posts: 9,709	Re: PO has me PO'd [url=https://flic.kr/p/2iqkSZE]20200207_124548 stub axle? wanted to move in about 3/8" making it difficult to get the snap ring seated, found a bolt with fine threads that would grab it, allowing me to pull out finished lock out, may send chrome cover out to get replated, only fugley piece of the whole system Deadhead Minn. seems to have a good source [url=https://flic.kr/p/2iqmcid]20200207_130214 __________________ Semper Fi...Uncle Sam, you da man All parts offered to help are free, unless otherwise noted Dont try this stuff in my build thread, unless you have 55 years of mechanical OTJ training SAFETY FIRST AS usual, off topic They say your mind goes second, can't remember the first Jim

02-07-2020, 02:48 PM	#3212
jaros44sr Senior Member Join Date: May 2006 Location: Philadelphia, Pa. 19454 Posts: 9,709	Re: PO has me PO'd after thought, I think I read somewhere maybe Special K, that you should only use a light oil on this step of the reassembly, as grease is to heavy and sticky to allow proper function of the lock out __________________ Semper Fi...Uncle Sam, you da man All parts offered to help are free, unless otherwise noted Dont try this stuff in my build thread, unless you have 55 years of mechanical OTJ training SAFETY FIRST AS usual, off topic They say your mind goes second, can't remember the first Jim

02-07-2020, 08:20 PM	#3214
jaros44sr Senior Member Join Date: May 2006 Location: Philadelphia, Pa. 19454 Posts: 9,709	Re: PO has me PO'd [url=https://flic.kr/p/2iqsVRH]20200207_191431 As Wes said, these caliper bolts are a direct replacement, except bolt head size Thanks Richard for confirming that, still have that piece for the heater shroud, just been to busy to ship __________________ Semper Fi...Uncle Sam, you da man All parts offered to help are free, unless otherwise noted Dont try this stuff in my build thread, unless you have 55 years of mechanical OTJ training SAFETY FIRST AS usual, off topic They say your mind goes second, can't remember the first Jim

02-25-2020, 01:12 PM	#3215
jaros44sr Senior Member Join Date: May 2006 Location: Philadelphia, Pa. 19454 Posts: 9,709	Re: PO has me PO'd Attempting to bench bleed my M/C, bought some metal pre flared tubing from NAPA (7/16 and !/2") just bent by hand to circle back into m/c chambers never tried this method before, so we'll see how it goes. Videos on line show it just leaking out of the ports. as long as the tubes are below the fluid level in the chambers I think this will work still have to build a bracket to keep the plunger from moving [url=https://flic.kr/p/2ixAC1R]20200225_112606 __________________ Semper Fi...Uncle Sam, you da man All parts offered to help are free, unless otherwise noted Dont try this stuff in my build thread, unless you have 55 years of mechanical OTJ training SAFETY FIRST AS usual, off topic They say your mind goes second, can't remember the first Jim Last edited by jaros44sr; 02-25-2020 at 01:37 PM.

02-26-2020, 11:51 AM	#3216
jaros44sr Senior Member Join Date: May 2006 Location: Philadelphia, Pa. 19454 Posts: 9,709	Re: PO has me PO'd [url=https://flic.kr/p/2ixXmGx]20200226_103820 Seems like this method worked, just loosened up the three bolts, 1 for the M/C bolt and 2 for the prop valve, so I could start the fittings by hand, nothing worse than cross threading fittings at this point!! Now onto the bleeders Thinking of supporting the safety pin on the prop valve, so it doesn't slide open, but can't think of a way yet Forgot to mention that I pushed on the pedal when the recirculating pipes were in place, seemed to get the air out This old coating from eastwood seems to be impervious from brake fluid __________________ Semper Fi...Uncle Sam, you da man All parts offered to help are free, unless otherwise noted Dont try this stuff in my build thread, unless you have 55 years of mechanical OTJ training SAFETY FIRST AS usual, off topic They say your mind goes second, can't remember the first Jim Last edited by jaros44sr; 02-26-2020 at 12:01 PM.

02-28-2020, 05:36 PM	#3217
jaros44sr Senior Member Join Date: May 2006 Location: Philadelphia, Pa. 19454 Posts: 9,709	Re: PO has me PO'd [url=https://flic.kr/p/2iyEDaq]20200228_102124 I've got brakes.... Not overly impressed with my chinese knockoff of a mighty vac. Zero setting was off by 4 inches of vacuum, fitting were a bit large to seal on the bleeder. I worked around them Pumped it up to 25 inches, opened up the bleeder, and sucked fluid into the container. CAREFUL, the back chamber on the M/C is very small. On first pull, you can empty it quickly, after that you can fill up the cannister 1/2 way, before the chamber needs fluid I bleed it down till I have about 10 inches then shut off bleeder Great method for a one man bleeder __________________ Semper Fi...Uncle Sam, you da man All parts offered to help are free, unless otherwise noted Dont try this stuff in my build thread, unless you have 55 years of mechanical OTJ training SAFETY FIRST AS usual, off topic They say your mind goes second, can't remember the first Jim



Register or Log In To remove these advertisements.

03-02-2020, 08:19 AM	#3218
jaros44sr Senior Member Join Date: May 2006 Location: Philadelphia, Pa. 19454 Posts: 9,709	Re: PO has me PO'd [url=https://flic.kr/p/2izHniz]20200302_070417 [url=https://flic.kr/p/2izMjEz]20200302_070442 Just B/C you can , doesn't mean you should, but I like it, and it's mine __________________ Semper Fi...Uncle Sam, you da man All parts offered to help are free, unless otherwise noted Dont try this stuff in my build thread, unless you have 55 years of mechanical OTJ training SAFETY FIRST AS usual, off topic They say your mind goes second, can't remember the first Jim

03-04-2020, 09:52 AM	#3220
jaros44sr Senior Member Join Date: May 2006 Location: Philadelphia, Pa. 19454 Posts: 9,709	Re: PO has me PO'd [url=https://flic.kr/p/2iAuDwb]20200304_082509 Yeah, Rg, I find it ironic that this is in my own PO has me PO'd thread, but I want people to know I am making a left hand turn __________________ Semper Fi...Uncle Sam, you da man All parts offered to help are free, unless otherwise noted Dont try this stuff in my build thread, unless you have 55 years of mechanical OTJ training SAFETY FIRST AS usual, off topic They say your mind goes second, can't remember the first Jim

03-09-2020, 10:08 AM	#3221
raggedjim Senior Member Join Date: Jun 2002 Location: Murray, Kentucky Posts: 3,602	Re: PO has me PO'd I like the symmetry of it. Rg __________________ Roger '68 Short step - https://67-72chevytrucks.com/vboard/...d.php?t=849675 '69 ('70?) 2wd Blazer '70 GMC Jimmy 2wd '73 Firebird - https://67-72chevytrucks.com/vboard/...d.php?t=853203

03-11-2020, 11:49 AM	#3223
jaros44sr Senior Member Join Date: May 2006 Location: Philadelphia, Pa. 19454 Posts: 9,709	Re: PO has me PO'd [url=https://flic.kr/p/2iDgNHK]20200311_104331 Trying to hook up my vacuum gauge, needed to find a coupling that would fit the adapter on the gauge. Home depot had this kit available __________________ Semper Fi...Uncle Sam, you da man All parts offered to help are free, unless otherwise noted Dont try this stuff in my build thread, unless you have 55 years of mechanical OTJ training SAFETY FIRST AS usual, off topic They say your mind goes second, can't remember the first Jim

03-11-2020, 12:08 PM	#3224
jaros44sr Senior Member Join Date: May 2006 Location: Philadelphia, Pa. 19454 Posts: 9,709	Re: PO has me PO'd my vacuum gauge on the pump is about 5 inches off [url=https://flic.kr/p/2iDd3L8]20200311_110422 BTW, I want to thank Harlowhead for sending me the female electrical connecter for the harness coming off of my steering column free of charge, not even shipping, what a good member. Things like that make this the best board on the net Thank you Harlowhead!!!!! __________________ Semper Fi...Uncle Sam, you da man All parts offered to help are free, unless otherwise noted Dont try this stuff in my build thread, unless you have 55 years of mechanical OTJ training SAFETY FIRST AS usual, off topic They say your mind goes second, can't remember the first Jim Last edited by jaros44sr; 03-11-2020 at 12:26 PM.

04-22-2020, 09:07 AM	#3225
jaros44sr Senior Member Join Date: May 2006 Location: Philadelphia, Pa. 19454 Posts: 9,709	Re: PO has me PO'd started on exhaust, gathered parts from NAPA [url=https://flic.kr/p/2iLbwrA]20200402_081202 __________________ Semper Fi...Uncle Sam, you da man All parts offered to help are free, unless otherwise noted Dont try this stuff in my build thread, unless you have 55 years of mechanical OTJ training SAFETY FIRST AS usual, off topic They say your mind goes second, can't remember the first Jim

Register or Log In To remove these advertisements.