Project Vitamin C-10

[daverod]

How exactly does that help? Never mind I don't want to know.

It doe'snt really have a pee trap. A Pee trap stops the fumes from coming up and into the living space. You know methane is explosive right. I'm sure it's all to code. Bubba missed that the outlets aren't GFI protected.

Looks like Alan is in high speed. Truck is almost ready. Can't believe you haven't started it yet.

[Strodder]

That strainer will stop the $hit from clogging up the pipe that I didn't put a trap in. I'm going to fix that, but no time right now. The outlets are GFI protected. You only need one in the circuit. SEE, now stop picking on me.

[daverod]

Ok so you made it look like its GFI protected. I guess the big black cap will keep you from blowing yourself up. Where does all that $hit drain to? Oh ya thats right you hooked it up to the sewer.

[Strodder]

Originally Posted by daverod

Ok so you made it look like its GFI protected. I guess the big black cap will keep you from blowing yourself up. Where does all that $hit drain to? Oh ya thats right you hooked it up to the sewer.

I dug a 55 gal septic tank.

[56taskforce]

Of course you do know Alan you have to do a project pay off video so you need to yell across the fence to Shannon and tell him to bring a video camera cause we want action shots. I know that you put a lot of work into your truck and that paint is gorgeous but you are going to have to grit your teeth and put a little burnt rubber in the fender wells.

[56taskforce]

Originally Posted by Strodder

now stop picking on me.

Sorry Dennis I just don't see that happening you're just way to much fun

[Strodder]

I feel like a nose sometimes. Everybody picks on me.

[bubba327]

how did we get Dennis's shop in Alans thread?? Alan doesn"t need this. He is busy working on his truck and it is looking great!!!


Dennis-- we should be over in your thread! Then we could pick on you some more. I hear it is cocktail time there.
I hear Hef's girlfriend is available again... WTF.. he is 85 years old . she must have the pre-nups explained to her.

[daverod]

You started it. He'll take what we give him.Come on more pictures of Dennis's bath room. Alan's busy he'll never know.

[Strodder]

ALLAN, help me out here and change the subject.

[Alan's Classic]

Originally Posted by firenuttz

long time follower, first time poster.....but i had to say somethin the truck looks b*****n!!!

Thanks for posting and the comments. Glad someone is watching all my mistakes.

Originally Posted by greg65

Nice choice on the bed wood.

I believe it is ash.

Originally Posted by 56taskforce

Alan on a more serious note and to give your thread back I have a question about spray guns. I will be stating my project soon and will be needing a gun to spray primer as a beginning painter do you have any suggestions for an inexpensive quality gun and do I need a gun for each process or can I get one that can do it all with different tips??? BTW You are the master that truck is a real work of art !!!!!
Oh and one more question, Why is it so much fun to wind Dennis up???

That's a hard question. I will say this, I used a cheap gun on the first car I painted 23 years ago. I used it for primer and single stage. If you use only one gun clean throughly between primer and single stage. I was pretty meticulous at cleaning the gun. I didn't have any problems on that one. Since then I've had contamniates come out on my color coats and later on clear coats. It's very irritating to have a nice job and something like that happen. that's why I and most all painters have a seperate gun for primer, color and clear at the least. I've used cheap guns and was well pleased with them. My first gun came from Sam's club. Since then I've bought guns from Matco and was pleased with them. After using the painters gun at work I was sold. I bought a used Iwata LP 1.3 tip from him. I love that gun. It really breaks up and atomises the material. I have less runs than before. I didn't have many, but I can see the difference.

Definately practice before painting. I tell people to go to a local body shop and get their left over paint and maybe some parts that came off a wrecked car and shoot those. Our shop recyles old paint. You may have to get some reducer and hardener. It's worth a shot.

Always spray your edges first no matter which coat you are on. That's on e of my major problems. I'm getting better at getting them.

If you spray mettalics always spray the panel in the orientation it will be on the truck. What I mean is don't spray a fender laying down on the table.

Sorry, I didn't answer your question directly. I just stated what I have done over the years. There are so many choices out there. What might work good for me might not be he best for the next guy.

Originally Posted by Strodder

Be cause I AM WE TODD IT, I'M SOFA KING WE TODD IT.

Over here we say "I am we Todd did" haha

Originally Posted by daverod

How exactly does that help? Never mind I don't want to know.

Looks like Alan is in high speed. Truck is almost ready. Can't believe you haven't started it yet.

Me neither. I'm scared, it's been on the stand for 11 years. Don't worry I will prime the oil with my home made oil primer. What's that you say. i will have an article on it soon. Most know about it, but some have never seen one.

Originally Posted by 56taskforce

Of course you do know Alan you have to do a project pay off video so you need to yell across the fence to Shannon and tell him to bring a video camera cause we want action shots. I know that you put a lot of work into your truck and that paint is gorgeous but you are going to have to grit your teeth and put a little burnt rubber in the fender wells.

If the engine runs and runs good. I won't be scared to light them up. Shannon might get mad, he's always cussing the speeders in out hood. I won't be speeding, just sitting there smokin' em.

Originally Posted by bubba327

how did we get Dennis's shop in Alans thread?? Alan doesn"t need this. He is busy working on his truck and it is looking great!!!


Dennis-- we should be over in your thread! Then we could pick on you some more. I hear it is cocktail time there.
I hear Hef's girlfriend is available again... WTF.. he is 85 years old . she must have the pre-nups explained to her.

Friends are always welcome here.

Originally Posted by daverod

You started it. He'll take what we give him.Come on more pictures of Dennis's bath room. Alan's busy he'll never know.

Man, I was down and out last night. I guess I got bit by a spider. My stomach was tore up and I was beat down. I'm on the mends now. Now I have some kind of rash popping up on my left arm. Reaction a day and a half later?

[Strodder]

Sounds like your going to die soon. Dibs on your truck.

[Strodder]

Really I hope your going to be OK

[198plus]

lmao..........

Originally Posted by Strodder

Sounds like your going to die soon. Dibs on your truck.

[daverod]

As long as it does'nt start looking like a bullseye you'll live. If it does? I would take much better care of your truck than that Strodder. We should have a raffle to see how many tries it takes to start.

[Alan's Classic]

Originally Posted by Strodder

ALLAN, help me out here and change the subject.

Looks like the spider bite took the attention off of you.

Originally Posted by Strodder

Sounds like your going to die soon. Dibs on your truck.

Dang Vulture.

Originally Posted by Strodder

Really I hope your going to be OK

Feeling guilty now.

Originally Posted by 198plus

lmao..........

Dang Ronnie you know you would miss me if I was gone. Who else can you call and ask questions. J/K

Originally Posted by daverod

As long as it does'nt start looking like a bullseye you'll live. If it does? I would take much better care of your truck than that Strodder.

I think I will live. So ya'll can retrack your claws.

Working on the fuel line. Waiting on a few parts to finish it up. They should be here tomorrow.

[Strodder]

I'm cracking up right now.

Fuel line look good.

[56taskforce]

Tanks for the paint gun advice Alan. I guess I will start with a cheap gun to get the etching and high build primers on then buy a couple better guns for the paint and clear.

As far as Shannon yelling at the traffic in the hood don’t worry about it us old Marines get kinda cantankerous but we mean well as long as you’re not to close when the veins are standing out in our necks you’re fine. Oh if you are call a maggot you might want to run.

[shortbed70]

Man I can't wait to see this thing complete and driving... Looks killer even underneath it.
Posted via Mobile Device

[65Custom]

Really Looking nice Alan, The bed looks great, not too far off from being finished, and for some reason I'm not getting my notices to keep up with your thread, I got to look into that, I'm getting way behind. again Really looking good!!!

[Alan's Classic]

Originally Posted by Strodder

I'm cracking up right now.

Fuel line look good.

Originally Posted by 56taskforce

Tanks for the paint gun advice Alan. I guess I will start with a cheap gun to get the etching and high build primers on then buy a couple better guns for the paint and clear.

As far as Shannon yelling at the traffic in the hood don’t worry about it us old Marines get kinda cantankerous but we mean well as long as you’re not to close when the veins are standing out in our necks you’re fine. Oh if you are call a maggot you might want to run.

Your welcome!! and

Originally Posted by shortbed70

Man I can't wait to see this thing complete and driving... Looks killer even underneath it.
Posted via Mobile Device

Thanks Troy, I really like the bottom side. Too bad many won't see it.

Originally Posted by 65Custom

Really Looking nice Alan, The bed looks great, not too far off from being finished, and for some reason I'm not getting my notices to keep up with your thread, I got to look into that, I'm getting way behind. again Really looking good!!!

Thanks Kevin, did you get the notifications of my updates figured out?

I got the fuel line all hooked up and ran. Still need to get the tank PC.

I pulled the drive shaft out to check the length. It came out of my truck when it had a PG and now I have a T350. The yoke wouldn't go into the tranny. I always thought the PG and T350 spline counts are the same. I counted and they were. I believe the corrosion on the yoke is stopping it from going into the tail housing bushing. I cleaned on it some, but it was late to try to fit it again. Once I determine the length is good/bad I will have the drive shaft reworked with a new yoke and U joints.

I took my girls up to Clayton, GA for fun weekend with me. We will be in the rivers all day tomorrow. They had a blast last year doing it. We are staying in a motel this time. Look at the friend we found in the pool.

[65Custom]

Originally Posted by Alan's Classic

Your welcome!! and



Thanks Troy, I really like the bottom side. Too bad many won't see it.



Thanks Kevin, did you get the notifications of my updates figured out?

I got the fuel line all hooked up and ran. Still need to get the tank PC.

I pulled the drive shaft out to check the length. It came out of my truck when it had a PG and now I have a T350. The yoke wouldn't go into the tranny. I always thought the PG and T350 spline counts are the same. I counted and they were. I believe the corrosion on the yoke is stopping it from going into the tail housing bushing. I cleaned on it some, but it was late to try to fit it again. Once I determine the length is good/bad I will have the drive shaft reworked with a new yoke and U joints.

I took my girls up to Clayton, GA for fun weekend with me. We will be in the rivers all day tomorrow. They had a blast last year doing it. We are staying in a motel this time. Look at the friend we found in the pool.

Ewwwwweeee!!!!!!

and I resubscribed seems like I'm getting notices now for your thread

[SulphuriousSam]

Wow. Around here they charge extra fir mice in da pool. I know you have heard this alot but your truck is awesome ok there I'm subscribed again. I keep unsubscribing from threads with my fat thumbs on my iPhone
Posted via Mobile Device

[Alan's Classic]

Originally Posted by 65Custom

Ewwwwweeee!!!!!!

and I resubscribed seems like I'm getting notices now for your thread

Originally Posted by SulphuriousSam

Wow. Around here they charge extra fir mice in da pool. I know you have heard this alot but your truck is awesome ok there I'm subscribed again. I keep unsubscribing from threads with my fat thumbs on my iPhone
Posted via Mobile Device

Maybe that's why it cost so much. BTW Thanks.

I survived the trip with just me and the girls for 2 nights. Since we share snow pics, I thought I would share some North GA pics.

[Alan's Classic]

I don't know which option to go with. Because of limited knowledge of drive shafts. I need a new yoke for my T350. I've been looking for a used one just for mock up. I haven't done much looking, but so far nothing in the used department. I will check the local junk yard tomorrow. So far in my research I have found this new one. Here is the info on it. It's not the exact same size, but since I am getting a new shaft made it shouldn't matter. Maybe I should just contact the local drive line shop and see which route to go. Maybe I can provide a measurement and just have them make it.



This yoke accepts 1310 series u-joints, which have 1 1/16" outside diameter cups and measure 3 7/32" wide to the outside of the cups.

The following transmissions have 27 spline output shafts:

Powerglide
Saginaw 3 Speed
Saginaw 4 Speed
Muncie 4 Speed
Borg Warner T-4
GM Borg Warner T-5
GM T-350
GM TH-350
GM T-56
700R
700R4
4L60
4L60E
4LL0E
200 Metric
Brinn
Bert
Falcon

Yoke Features:

Spline Length: 4 1/2"
Total Length: 5 1/2" (measured from the center of the u-joint to the end of the yoke)
Accepts: 1310 Series U-Joints
1 1/16" U-Joint Cup O.D.
3 7/32" U-Joint Width (measured outside-of-cup to outside-of-cup)
External Clips