Lets Play Whatz It? !! - Page 13 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

dwcsr · 10-05-2011, 04:25 PM

Quote:

Originally Posted by stellar

here is another one, but I don't know what it is. (RULE VIOLATION) this one is free if you pay the boating fees.

This is part of a distributor machine. Its an attachment but I forgot what exactly its for. Might be for magnetos

stellar · 10-05-2011, 04:28 PM

Quote:

Originally Posted by dwcsr

This one is already on page 2 king pin alignment tool

Well no wonder you knew what it was. Do ya want to buy another one so you can do both sides at once? Sorry for the Fup

What is the other one? I have been asking for years and can't find out. It is made by Allen electric. They made electrical test equipment. I hope one of the computer wiz kids can find it somewhere. I can't.

stellar · 10-05-2011, 04:33 PM

Quote:

Originally Posted by dwcsr

This is part of a distributor machine. Its an attachment but I forgot what exactly its for. Might be for magnetos

Magneto was my guess too. I contacted a mag repair shop years ago and sent pics and they didn't know either, but said it may be for that.

You are too good to play any more. just show the whatz it stuff. I will dig around and look for something else.

dwcsr · 10-05-2011, 05:47 PM

Quote:

Originally Posted by stellar

Magneto was my guess too. I contacted a mag repair shop years ago and sent pics and they didn't know either, but said it may be for that.

You are too good to play any more. just show the whatz it stuff. I will dig around and look for something else.

These guys will know what it is
http://www.distributortester.com/index.asp

*RUSHNBOBO* · 10-05-2011, 08:40 PM

somebody put up a pic ...I'm getting bored

dwcsr · 10-05-2011, 10:55 PM

Automotive, Very rare, used in the 30's to late 50's

gmtec93c1500 · 10-06-2011, 04:33 PM

my first thought was to push calipers back ... but they never had hydraulic brakes in the 30's.... some sort of seal installer? im thinking theres another piece to this tool something to catch the little legs on the sides

dwcsr · 10-06-2011, 06:58 PM

Quote:

Originally Posted by gmtec93c1500

my first thought was to push calipers back ... but they never had hydraulic brakes in the 30's.... some sort of seal installer? im thinking theres another piece to this tool something to catch the little legs on the sides

Nothing to do with brakes, not a seal installer. There are suppose to be 2 more bars or handles about 6 inches long like on the top that screw into the holes in the second section. It only is used for GM cars and light trucks 3/4 ton and down. The top section is threaded internally and screws onto the part that this tool services.

gmtec93c1500 · 10-06-2011, 07:54 PM

king pin presss?

*RUSHNBOBO* · 10-06-2011, 08:04 PM

Rear Spring Shackle Bushing Remover and Replacer ?

motornut · 10-06-2011, 10:06 PM

ball joint tool ?
my socket for the 4X4 balls it "screws" the ring in kinda looks about the size of the center bit

71swb4x4 · 10-06-2011, 10:40 PM

Here you go guys, get-r-dun!! http://67-72chevytrucks.com/vboard/s...d.php?t=487664

dwcsr · 10-07-2011, 12:08 AM

Its not for springs or suspension or steering. Its a tool that you would say why the hell did they make a tool for that? It is a Kent Moore made tool.

gmtec93c1500 · 10-07-2011, 12:25 PM

wheel stud installer?

*RUSHNBOBO* · 10-07-2011, 12:39 PM

yoke installer, trans or diff ?

*RUSHNBOBO* · 10-07-2011, 12:40 PM

steering wheel installer ?

dwcsr · 10-07-2011, 02:20 PM

Its not an installer of anything, its not for steering or any part of steering or wheels or suspension., Not for the rear end or a yoke. Its used to remove only one item on the car or truck and each vehicle only has one of these parts. It is driveline related.

Its overly complicated for what it does and your going to say what the hell did they make that for? I have never had a time I actually needed it in about 50-60 times I have done this procedure and more times than not the part almost falls out even if its still good. Its also not used to install that same part.

If no one gets it I'll post a picture of a tool that is used after it.. Hopefully that will be enough input for you to guess.

dwcsr · 10-07-2011, 02:34 PM

I'm going to add it is a GM Kent Moore J tool that starts with 0 that's how old this dog is.
so its j-0XXX

*RUSHNBOBO* · 10-07-2011, 03:19 PM

Clutch Gear Bearing Puller ?

dwcsr · 10-07-2011, 03:26 PM

Quote:

Originally Posted by RUSHNBOBO

Clutch Gear Bearing Puller ?

Yes, It takes more time to install that clunker than it would take to just pull the input shaft out by hand.

*RUSHNBOBO* · 10-07-2011, 03:40 PM

Quote:

Originally Posted by dwcsr

Yes, It takes more time to install that clunker than it would take to just pull the input shaft out by hand.

Damn !!! that was a tough one; at least 2 hours searching......I actually got this part number..... "J 937" .....the "0" threw me off for a while; could be a slightly different flavor.

dwcsr · 10-07-2011, 03:50 PM

Quote:

Originally Posted by RUSHNBOBO

Damn !!! that was a tough one; at least 2 hours searching......I actually got this part number..... "J 937" .....the "0" through me off for a while; could be a slightly different flavor.

Depending on who lists it, its either a J-0937 or J-937, I suspect that its J-937 because its companion tools have J-933 and J-932 on the tool itself.

*RUSHNBOBO* · 10-07-2011, 04:57 PM

dwsr.......I don't know if you have or own this tool but this guy is looking for one, and many other vintage Kent Moore tools

http://vintageautostuff.com/chevrole...t-moore-j.html

dwcsr · 10-07-2011, 08:09 PM

Quote:

Originally Posted by RUSHNBOBO

dwsr.......I don't know if you have or own this tool but this guy is looking for one, and many other vintage Kent Moore tools

http://vintageautostuff.com/chevrole...t-moore-j.html

I have the 937, 936, 933 and 932.

*RUSHNBOBO* · 10-07-2011, 08:21 PM

Quote:

Originally Posted by dwcsr

I have the 937, 936, 933 and 932.

sent pm

Rush

10-05-2011, 08:40 PM	#305
RUSHNBOBO Account Suspended Join Date: Jun 2010 Location: Placerville Ca. Posts: 982	Re: Lets Play Whatz It? !! somebody put up a pic ...I'm getting bored

10-05-2011, 10:55 PM	#306
dwcsr Hollister Road Co. Join Date: Apr 2005 Location: Houston Posts: 6,134	Re: Lets Play Whatz It? !! Automotive, Very rare, used in the 30's to late 50's Attached Images

10-06-2011, 04:33 PM	#307
gmtec93c1500 Registered User Join Date: Aug 2011 Location: P.E.I Canada eh Posts: 158	Re: Lets Play Whatz It? !! my first thought was to push calipers back ... but they never had hydraulic brakes in the 30's.... some sort of seal installer? im thinking theres another piece to this tool something to catch the little legs on the sides

10-06-2011, 07:54 PM	#309
gmtec93c1500 Registered User Join Date: Aug 2011 Location: P.E.I Canada eh Posts: 158	Re: Lets Play Whatz It? !! king pin presss?

10-06-2011, 08:04 PM	#310
RUSHNBOBO Account Suspended Join Date: Jun 2010 Location: Placerville Ca. Posts: 982	Re: Lets Play Whatz It? !! Rear Spring Shackle Bushing Remover and Replacer ?

10-06-2011, 10:06 PM	#311
motornut 78K & 79C Jimmys Join Date: Nov 2009 Location: Ottawa Ont CANADA Posts: 7,901	Re: Lets Play Whatz It? !! ball joint tool ? my socket for the 4X4 balls it "screws" the ring in kinda looks about the size of the center bit __________________ John 1978 GMCJimmy4X4-350/203 1979 GMCJimmy4X2-305/350

10-06-2011, 10:40 PM	#312
71swb4x4 Senior Member Join Date: Nov 2003 Location: Brookings, SD Posts: 10,497	Re: Lets Play Whatz It? !! Here you go guys, get-r-dun!! http://67-72chevytrucks.com/vboard/s...d.php?t=487664 __________________ Some people are like slinkies, they aren't good for anything, but you can't help but smile when you see one tumble down the stairs.

10-07-2011, 12:08 AM	#313
dwcsr Hollister Road Co. Join Date: Apr 2005 Location: Houston Posts: 6,134	Re: Lets Play Whatz It? !! Its not for springs or suspension or steering. Its a tool that you would say why the hell did they make a tool for that? It is a Kent Moore made tool.

10-07-2011, 12:25 PM	#314
gmtec93c1500 Registered User Join Date: Aug 2011 Location: P.E.I Canada eh Posts: 158	Re: Lets Play Whatz It? !! wheel stud installer?

10-07-2011, 12:39 PM	#315
RUSHNBOBO Account Suspended Join Date: Jun 2010 Location: Placerville Ca. Posts: 982	Re: Lets Play Whatz It? !! yoke installer, trans or diff ?

10-07-2011, 12:40 PM	#316
RUSHNBOBO Account Suspended Join Date: Jun 2010 Location: Placerville Ca. Posts: 982	Re: Lets Play Whatz It? !! steering wheel installer ?

10-07-2011, 02:20 PM	#317
dwcsr Hollister Road Co. Join Date: Apr 2005 Location: Houston Posts: 6,134	Re: Lets Play Whatz It? !! Its not an installer of anything, its not for steering or any part of steering or wheels or suspension., Not for the rear end or a yoke. Its used to remove only one item on the car or truck and each vehicle only has one of these parts. It is driveline related. Its overly complicated for what it does and your going to say what the hell did they make that for? I have never had a time I actually needed it in about 50-60 times I have done this procedure and more times than not the part almost falls out even if its still good. Its also not used to install that same part. If no one gets it I'll post a picture of a tool that is used after it.. Hopefully that will be enough input for you to guess. Last edited by dwcsr; 10-07-2011 at 02:28 PM.

10-07-2011, 02:34 PM	#318
dwcsr Hollister Road Co. Join Date: Apr 2005 Location: Houston Posts: 6,134	Re: Lets Play Whatz It? !! I'm going to add it is a GM Kent Moore J tool that starts with 0 that's how old this dog is. so its j-0XXX

10-07-2011, 03:19 PM	#319
RUSHNBOBO Account Suspended Join Date: Jun 2010 Location: Placerville Ca. Posts: 982	Re: Lets Play Whatz It? !! Clutch Gear Bearing Puller ? Attached Images

10-07-2011, 04:57 PM	#323
RUSHNBOBO Account Suspended Join Date: Jun 2010 Location: Placerville Ca. Posts: 982	Re: Lets Play Whatz It? !! dwsr.......I don't know if you have or own this tool but this guy is looking for one, and many other vintage Kent Moore tools http://vintageautostuff.com/chevrole...t-moore-j.html



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.