What did you do to your truck today? - Page 13 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

gmcdude · 11-22-2009, 03:47 PM

Went yesterday and got the door renforcement screws and ferles,clips for my 72 GMC doors Dean Johnson at TNCHEV.com has any used part you'll need, He's located just outside Knoxville Tn. I was there anyway and what I pcked up no body has them new.

Tx Firefighter · 11-22-2009, 07:45 PM

I had to do a massive powdercoating job today but I did find some time for my own truck.

I cleaned and flushed the tank with muriatic acid and water mix. Then, I prepped the outside for powdercoating. After all of that nasty chemical stuff, I put it in the oven to cook it real dry inside and out. It's actually out there cooking right now at 300 degrees.

I'm waiting for my POR15 gas tank sealer to show up as well as new sending unit and gasket from Classic Parts.

Vernski · 11-22-2009, 10:09 PM

Quote:

Originally Posted by bubba327

Charged the battery. Ordered more parts online. Pretty lame .....

Today the wind is howling and it is snowing again. My thankful thing today is ... A Corona box full of new 2009 Goodguys, Hemmings and street rod magazines made it to my house to read this winter before I pass them around to some one else.
No bad days here.
Happy thankgiving
Attachment 516278

Would be nice Bubba to have the Corona box full of cold ones plus another box
full of mags. It don't get any better than that. Happy Holidays!---Vernski

SCOTI · 11-22-2009, 11:31 PM

I mocked up the seat for my not yet introduced 64 project. A buddy from work did the upholstrey & didn't do bad @ all for a novice (his pops does it for a living & he's trying to get into it as well). The frame & box were powder-coated satin blk; the material is 02/03 Dodge Ram stuff. The seats are just setting on the frame for pics . .....

scotts62 · 11-22-2009, 11:38 PM

Hey that looks good!!

What you mean not introduced

Now i want to see some pics

198plus · 11-22-2009, 11:42 PM

Nice seats

SCOTI · 11-22-2009, 11:46 PM

Quote:

Originally Posted by scotts62

Hey that looks good!!

What you mean not introduced

Now i want to see some pics

You're telling me! He started w/this . . .....

*LILRED66* · 11-23-2009, 03:07 AM

A little more progress on Jon C's big back window cab. Should be done by Monday night. If I could get my POS Sprint wireless card to maintain its connection, I would upload several more pictures. Note to self, do not buy anymore Sprint products.

**DPowers** · 11-23-2009, 12:52 PM

Pulled the front brakes including backing plates to rebuild with new shoes, flex hoses, bearings, wheel cylinders and turned drums. Cleaned it all up to get ready to paint and reassemble.

ironhorse1973 · 11-23-2009, 05:50 PM

Was on-line all day looking for a flow control valve spring for my power steering pump!!

*LILRED66* · 11-23-2009, 06:20 PM

Quote:

Originally Posted by ironhorse1973

Was on-line all day looking for a flow control valve spring for my power steering pump!!

I don't have one of them, but you might check your local auto parts store or www.truckandcarshop.com

rgCarGuy · 11-23-2009, 07:00 PM

I am still working on my to-do list, figuring out what I am going to do and in what order. In the past couple weeks I have:

Gotten it legal,

Unpacked the spare parts the PO sent with the truck (some good stuff in there!)

Filled it up, and overflowed the tank (lesson learned on that one

)

Ordered a 96X72 bed mat (the bed is already redone and I want to be able to use it as a truck sometimes)

Connected a second set of speakers that were in the boxes, then bought Kenwood and Pioneer Speakers off ebay to replace the ones in it now (It already has an aftermarket Pioneer sterio).

Took it to the car wash.

Bought an 80 gallon air compressor (still working on where exactly and how to install it as to least disrupt the house and neighbors.)

I won a new glove box door assembly on ebay today ( sorry if I was bidding against any of you).

Nothing picture worthy yet.

sams60gmc · 11-24-2009, 02:28 AM

Pulled off my square body fenders off of my stepside bed and figured out that my 55-66 fenders come no where close to lining up with the factory holes. Oh well minor set back. I will make a template and drill some new holes. After that I will get a 1'' strip of sheet metal and widen each fender 1''.

*LILRED66* · 11-24-2009, 04:28 AM

Finished Jon C's big back window cab this evening. We will load it up tomorrow and be on the way to AL.

Tx Firefighter · 11-24-2009, 09:02 PM

I'm still working on my gas tank. I figured out where it had been seeping on the bottom. So, I brazed it up. After that I powdercoated it in silver vein with clear. It's in the oven curing right now while I type this.

POR15 is giving me the beat down on my can of tank sealer. I ordered a bunch of different stuff Friday. All of it is delivered by today except the POR15. That's due to be delivered Monday. That's going to slow my progress down a good bit.

Still pushing like hell to get this thing on the road in the next few weeks. I want to take mama to get her Christmas tree in it.

SCOTI · 11-24-2009, 09:20 PM

Quote:

Originally Posted by Tx Firefighter

Still pushing like hell to get this thing on the road in the next few weeks. I want to take mama to get her Christmas tree in it.

Now that's cool. Please follow-up & let me know if you're not happy w/the motor once it's up & running.

glendale · 11-24-2009, 09:41 PM

finally got the paint pretty much done on the dash of my truck now i need to put everything back together.

oh yea i also got the material for my seat. i think it matches pretty good. as soon as i get the windshield back in i can start the seat.

ruffrida2005 · 11-24-2009, 10:11 PM

the seats will pretty much match. I'm waiting to see your truck together. Are you using any other colors to break up all the orange?

glendale · 11-24-2009, 10:24 PM

yeah the truck is all white. only the dash,roof and striping are that color. the seat will be white with copper pleated inserts.

jgh64pkup · 11-24-2009, 10:47 PM

man thats a lot of metalflake
so how much are you paying for the sunburst orange

glendale · 11-24-2009, 10:56 PM

Quote:

Originally Posted by jgh64pkup

man thats a lot of metalflake
so how much are you paying for the sunburst orange

i was super broke when i bought the paint. so i had them make them in rattle cans two cans 60 bucks. i already had plenty of clear so that was not a problem and i had the metal flake. i made a flake gun and got busy. this is really the first paint i have shot. i'm pretty proud of it.

jgh64pkup · 11-24-2009, 11:01 PM

we paid 90 a quart

glendale · 11-24-2009, 11:16 PM

yeah they wanted 150.00 and i just did not have the coin. this all started because the windshield gasket was leaking. and here we are. this truck is supposed to be my daily some times i can't leave well enough alone.

shortbed70 · 11-25-2009, 12:00 AM

Did some grinding on my front inner fender patch after I locked myself out of the house and had to wait on the wife to get home.

markeb01 · 11-25-2009, 01:20 AM

Quote:

Originally Posted by glendale

yeah they wanted 150.00 and i just did not have the coin. this all started because the windshield gasket was leaking. and here we are. this truck is supposed to be my daily some times i can't leave well enough alone.

That flake work is impressive, especially for a first attempt. There probably isn't anybody on here that knows how to leave well enough alone. One thing always leads to another.

I remember when I got my 46 Ford back in the 80's. I was just going to steam clean the engine compartment and drop in a small block Chevy. But as long as I'm in there, might as well clean up this one thing. Next thing I knew all there was in front of the firewall was a pair of bare frame rails! Same thing with my truck, started a repaint a decade ago, and next thing there was nothing but an empty cab sitting on the frame. Took a year to paint everything and put it all back together.

11-22-2009, 03:47 PM	#301
gmcdude Registered User Join Date: Jul 2009 Location: Abingdon, Virginia Posts: 300	Re: What did you do to your truck today? Went yesterday and got the door renforcement screws and ferles,clips for my 72 GMC doors Dean Johnson at TNCHEV.com has any used part you'll need, He's located just outside Knoxville Tn. I was there anyway and what I pcked up no body has them new.

11-22-2009, 07:45 PM	#302
Tx Firefighter Watch out for your cornhole ! Join Date: Jun 2003 Location: Azle, Texas Posts: 14,162	Re: What did you do to your truck today? I had to do a massive powdercoating job today but I did find some time for my own truck. I cleaned and flushed the tank with muriatic acid and water mix. Then, I prepped the outside for powdercoating. After all of that nasty chemical stuff, I put it in the oven to cook it real dry inside and out. It's actually out there cooking right now at 300 degrees. I'm waiting for my POR15 gas tank sealer to show up as well as new sending unit and gasket from Classic Parts. __________________ I'm on the Instagram- @Gearhead_Kevin

11-22-2009, 11:31 PM	#304
SCOTI Registered User Join Date: Apr 2001 Location: DALLAS,TX Posts: 22,031	Re: What did you do to your truck today? I mocked up the seat for my not yet introduced 64 project. A buddy from work did the upholstrey & didn't do bad @ all for a novice (his pops does it for a living & he's trying to get into it as well). The frame & box were powder-coated satin blk; the material is 02/03 Dodge Ram stuff. The seats are just setting on the frame for pics . ..... Attached Images __________________ 67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... *Cubic inches is like Indiana Jones with a cheap pistol.* Last edited by SCOTI; 11-22-2009 at 11:33 PM.

11-22-2009, 11:38 PM	#305
scotts62 One day... Join Date: Apr 2008 Location: Tuttle, Ok Posts: 9,240	Re: What did you do to your truck today? Hey that looks good!! What you mean not introduced Now i want to see some pics __________________ Scott 93 crew cab build Project 62

11-22-2009, 11:42 PM	#306
198plus Registered User Join Date: May 2009 Location: Loganville, Ga. Posts: 1,408	Re: What did you do to your truck today? Nice seats

11-23-2009, 03:07 AM	#308
LILRED66 Account Suspended Join Date: May 2005 Location: Kansas City, KS Posts: 3,906	Re: What did you do to your truck today? A little more progress on Jon C's big back window cab. Should be done by Monday night. If I could get my POS Sprint wireless card to maintain its connection, I would upload several more pictures. Note to self, do not buy anymore Sprint products. Attached Images Last edited by LILRED66; 11-23-2009 at 03:15 AM.

11-23-2009, 12:52 PM	#309
DPowers One foot in front of the other Join Date: Aug 2008 Location: Parrottsville, TN Posts: 5,443	Re: What did you do to your truck today? Pulled the front brakes including backing plates to rebuild with new shoes, flex hoses, bearings, wheel cylinders and turned drums. Cleaned it all up to get ready to paint and reassemble. Last edited by DPowers; 11-23-2009 at 12:52 PM.

11-23-2009, 05:50 PM	#310
ironhorse1973 Registered User Join Date: Nov 2009 Location: Fox lake, IL Posts: 8	Re: What did you do to your truck today? Was on-line all day looking for a flow control valve spring for my power steering pump!!

11-23-2009, 07:00 PM	#312
rgCarGuy Registered User Join Date: Oct 2009 Location: Oklahoma Posts: 9	Re: What did you do to your truck today? I am still working on my to-do list, figuring out what I am going to do and in what order. In the past couple weeks I have: Gotten it legal, Unpacked the spare parts the PO sent with the truck (some good stuff in there!) Filled it up, and overflowed the tank (lesson learned on that one ) Ordered a 96X72 bed mat (the bed is already redone and I want to be able to use it as a truck sometimes) Connected a second set of speakers that were in the boxes, then bought Kenwood and Pioneer Speakers off ebay to replace the ones in it now (It already has an aftermarket Pioneer sterio). Took it to the car wash. Bought an 80 gallon air compressor (still working on where exactly and how to install it as to least disrupt the house and neighbors.) I won a new glove box door assembly on ebay today ( sorry if I was bidding against any of you). Nothing picture worthy yet. Last edited by rgCarGuy; 11-24-2009 at 09:46 PM.

11-24-2009, 02:28 AM	#313
sams60gmc Registered User Join Date: Sep 2008 Location: Vancouver Washington Posts: 726	Re: What did you do to your truck today? Pulled off my square body fenders off of my stepside bed and figured out that my 55-66 fenders come no where close to lining up with the factory holes. Oh well minor set back. I will make a template and drill some new holes. After that I will get a 1'' strip of sheet metal and widen each fender 1''. __________________ 1960 GMC short fleet, full frame build... http://67-72chevytrucks.com/vboard/s...d.php?t=329718

11-24-2009, 04:28 AM	#314
LILRED66 Account Suspended Join Date: May 2005 Location: Kansas City, KS Posts: 3,906	Re: What did you do to your truck today? Finished Jon C's big back window cab this evening. We will load it up tomorrow and be on the way to AL.

11-24-2009, 09:02 PM	#315
Tx Firefighter Watch out for your cornhole ! Join Date: Jun 2003 Location: Azle, Texas Posts: 14,162	Re: What did you do to your truck today? I'm still working on my gas tank. I figured out where it had been seeping on the bottom. So, I brazed it up. After that I powdercoated it in silver vein with clear. It's in the oven curing right now while I type this. POR15 is giving me the beat down on my can of tank sealer. I ordered a bunch of different stuff Friday. All of it is delivered by today except the POR15. That's due to be delivered Monday. That's going to slow my progress down a good bit. Still pushing like hell to get this thing on the road in the next few weeks. I want to take mama to get her Christmas tree in it. __________________ I'm on the Instagram- @Gearhead_Kevin

11-24-2009, 09:41 PM	#317
glendale Registered User Join Date: Jul 2009 Location: sacramento,ca Posts: 338	Re: What did you do to your truck today? finally got the paint pretty much done on the dash of my truck now i need to put everything back together. oh yea i also got the material for my seat. i think it matches pretty good. as soon as i get the windshield back in i can start the seat.

11-24-2009, 10:11 PM	#318
ruffrida2005 Member of the longbed union. Join Date: Feb 2009 Location: Killeen, Tx Posts: 2,158	Re: What did you do to your truck today? the seats will pretty much match. I'm waiting to see your truck together. Are you using any other colors to break up all the orange? __________________ Paul 88 GMC Crew Cab dually, 454/T400 64 LWB 400 HP 350/350T Bagged, under construction! Sold most of it! 92 S10 Iron Duke 5 speed, 5/7 drop for now. soon to be bagged. Sold http://67-72chevytrucks.com/vboard/s...59#post4637759

11-24-2009, 10:24 PM	#319
glendale Registered User Join Date: Jul 2009 Location: sacramento,ca Posts: 338	Re: What did you do to your truck today? yeah the truck is all white. only the dash,roof and striping are that color. the seat will be white with copper pleated inserts. Last edited by glendale; 11-24-2009 at 10:26 PM.



Register or Log In To remove these advertisements.

11-24-2009, 10:47 PM	#320
jgh64pkup Sunburst C10!!! Join Date: Jan 2009 Location: Texas Posts: 2,560	Re: What did you do to your truck today? man thats a lot of metalflake so how much are you paying for the sunburst orange __________________ Gage 1967 C10 Shortbed Stepside

11-24-2009, 11:01 PM	#322
jgh64pkup Sunburst C10!!! Join Date: Jan 2009 Location: Texas Posts: 2,560	Re: What did you do to your truck today? we paid 90 a quart __________________ Gage 1967 C10 Shortbed Stepside

11-24-2009, 11:16 PM	#323
glendale Registered User Join Date: Jul 2009 Location: sacramento,ca Posts: 338	Re: What did you do to your truck today? yeah they wanted 150.00 and i just did not have the coin. this all started because the windshield gasket was leaking. and here we are. this truck is supposed to be my daily some times i can't leave well enough alone.

11-25-2009, 12:00 AM	#324
shortbed70 Registered User Join Date: Mar 2002 Location: Forney TX Posts: 4,512	Re: What did you do to your truck today? Did some grinding on my front inner fender patch after I locked myself out of the house and had to wait on the wife to get home. __________________ Troy 1965 Chevy Bagged,361 sbc,voodoo cam,1.5 full roller rockers,patriot 185cc vortec heads 2.02-1.60,vortec weiand polished intake,demon carb my truckhttp://67-72chevytrucks.com/vboard/s...d.php?t=332884 Big Red Dog build http://67-72chevytrucks.com/vboard/s...d.php?t=572274

Register or Log In To remove these advertisements.