OR 100's of misc parts from the last 6 trucks parted out - Page 13 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

sboris · 05-09-2012, 03:56 PM

Quote:

Originally Posted by tll74

Pics of the dash pad. It is very nice, 150.00. I see no cracks and would clean up nicely. In my opinion it would be a hard find to find one any nicer. The door panels are nice 75.00 but not sure if they are original? I'll sell the belts. Let me know on the pad and panels. Thanks, Tom

Tom, beautiful dash pad. Unfortunately it is too dark for my color scheme as are the panels. My offer still stands on the belts. I have no doubt you can get your price for them. Thank you so much for taking the time to do that. You can pm me if it's a go on the belts.. 50213
Posted via Mobile Device

**tll74** · 05-09-2012, 05:45 PM

Shawn, gone on a road trip till friday. I'll get shipping cost then. Thanks,Tom
Posted via Mobile Device

jervin · 05-09-2012, 11:40 PM

have any driver's side inner fender that would fit a '67 C10?

**tll74** · 05-12-2012, 03:51 AM

Quote:

Originally Posted by unclesalty

Hey there ..... forgot to ask, also trying to find the upper side molding, both sides, for an 8' bed.. need only the 2 bed pieces, have the doors and fenders, dont have to be perfect...thanks- if you rustle up a set of rear e-brake cables, lmk,thanks

Quote:

Originally Posted by jervin

have any driver's side inner fender that would fit a '67 C10?

I probably do I will have to check. It will be a few days. Thanks, Tom

sboris · 05-12-2012, 04:33 PM

Tom, PayPal sent today. Thanks again..
Posted via Mobile Device

jervin · 05-13-2012, 09:50 PM

Hey, thanks for the response regarding the inquiry on 67-68 inner fenders. When you are able to post them please keep in line. thanks, jervin

metaphysician · 05-13-2012, 11:11 PM

Looking for the front right upper lock rod to the knob and clip. Will buy entire lock assembly if needed. Please let me know if you have this. Thanks!

**tll74** · 05-15-2012, 02:28 AM

Quote:

Originally Posted by metaphysician

Looking for the front right upper lock rod to the knob and clip. Will buy entire lock assembly if needed. Please let me know if you have this. Thanks!

No problem, got lot's of these. 8.00 shipped. Thanks, Tom

**tll74** · 05-15-2012, 02:32 AM

Quote:

Originally Posted by jervin

Hey, thanks for the response regarding the inquiry on 67-68 inner fenders. When you are able to post them please keep in line. thanks, jervin

Jervin, I looked today and I don't have any good ones at this time. Sorry, Tom

400smallblock · 05-15-2012, 10:29 AM

tom, i asked about a passenger side grill olding eyebrow back on the 7th. you responded and said you have one for 15.00 driver quality. i responded saying id take it. i havent seen or heard anything since. do you still want to sell it? jason

**tll74** · 05-15-2012, 08:15 PM

Quote:

Originally Posted by 400smallblock

tom, i asked about a passenger side grill olding eyebrow back on the 7th. you responded and said you have one for 15.00 driver quality. i responded saying id take it. i havent seen or heard anything since. do you still want to sell it? jason

Jason, sorry for the oversight. Somehow I thought I was waiting on you. PM sent. Thanks, Tom

**tll74** · 05-15-2012, 08:21 PM

Quote:

Originally Posted by unclesalty

Hey there ..... forgot to ask, also trying to find the upper side molding, both sides, for an 8' bed.. need only the 2 bed pieces, have the doors and fenders, dont have to be perfect...thanks- if you rustle up a set of rear e-brake cables, lmk,thanks

Another oversight! 15.00 for the harness, 25.00 each on nice driver upper 8' box trim. 24.28 shipping. The other items will also fit in the same package. Thanks, Tom

unclesalty · 05-15-2012, 08:42 PM

hi there! you get a chance to price the ride for the harness-$15, & trim-$45 to 48609?

unclesalty · 05-15-2012, 08:47 PM

Whoa!!! that was incredibly fast! Howd you do that? esp?
can you pm your address and all? thanks

unclesalty · 05-15-2012, 08:57 PM

...and i ll try and get a m o out in the morning

unclesalty · 05-15-2012, 09:04 PM

.. for $89.28

**tll74** · 05-16-2012, 11:21 AM

Quote:

Originally Posted by unclesalty

.. for $89.28

yep thats correct. PM sent

CC69Rat · 05-16-2012, 12:29 PM

Do you still have the GMC eyebrows? I know this is an older thread but it looks like they might still be available? Please let me know, maybe send some pics when you can. Thanks.

**tll74** · 05-17-2012, 01:39 AM

Quote:

Originally Posted by CC69Rat

Do you still have the GMC eyebrows? I know this is an older thread but it looks like they might still be available? Please let me know, maybe send some pics when you can. Thanks.

The RH is sold to 400smallblock pending payment. I do still have the LH.

CC69Rat · 05-17-2012, 07:46 AM

LH - drivers side?

If you have a sec Id like to see a closer pic of it. Ill take it as long as its driver / driver + condition. Mine has a rust spot on it about the size of a quarter.
Posted via Mobile Device

shawno72 · 05-17-2012, 08:48 AM

Hey Tom I am looking for the light socket that goes into to back of a standard heater control. Just a pigtail would be fine. If you have one how much shipped to 95240? Thank you.
Posted via Mobile Device

**tll74** · 05-17-2012, 08:24 PM

Quote:

Originally Posted by CC69Rat

LH - drivers side?

If you have a sec Id like to see a closer pic of it. Ill take it as long as its driver / driver + condition. Mine has a rust spot on it about the size of a quarter.
Posted via Mobile Device

I'll get close up for ya.

Quote:

Originally Posted by shawno72

Hey Tom I am looking for the light socket that goes into to back of a standard heater control. Just a pigtail would be fine. If you have one how much shipped to 95240? Thank you.
Posted via Mobile Device

Shawn, 8.00 shipped. Uncle Sam's mail will eat up half of that.

Thanks, Tom

Pmarti69 · 05-17-2012, 09:25 PM

Paypal payment sent, thanks paul

shawno72 · 05-17-2012, 11:34 PM

Tom pm me your paypal and I'll get a payment for the light socket. Thank you.
Posted via Mobile Device

**tll74** · 05-18-2012, 01:33 AM

Quote:

Originally Posted by Pmarti69

Paypal payment sent, thanks paul

Quote:

Originally Posted by shawno72

Tom pm me your paypal and I'll get a payment for the light socket. Thank you.
Posted via Mobile Device

Paul and Shawn, Thanks!

05-09-2012, 05:45 PM	#302
tll74 "Junkyard Dog" Join Date: Jan 2008 Location: Springfield Oregon Posts: 2,527	Re: 100's of misc parts from the last 6 trucks parted out Shawn, gone on a road trip till friday. I'll get shipping cost then. Thanks,Tom Posted via Mobile Device __________________ 72 C-10 Cheyenne Super LWB, Vortec 427,TH700, 3.73 posi, tach, tilt, AM-FM,Frame off in process. http://s289.photobucket.com/albums/l...t=7eae161e.pbw 88 Monte Carlo SS bought new only 10k miles. 73 Chevelle SS 454 had since high school. 74 Camaro Z28 350 AT numbers matching, Black on Black. 73 El Camino SS 350 4sp. 70 Chevelle SS 396 4sp, number matching with LS6 454 69 Chevy C30 Car Hauler 86 K20 383 4sp 4" lift frame off restoration. http://s289.photobucket.com/albums/l...t=1b1082d3.pbw

05-09-2012, 11:40 PM	#303
jervin Registered User Join Date: Jul 2009 Location: Swartz Creek, Michigan Posts: 85	Re: 100's of misc parts from the last 6 trucks parted out have any driver's side inner fender that would fit a '67 C10?

05-12-2012, 04:33 PM	#305
sboris Registered User Join Date: Jun 2011 Location: Osceola, Ia Posts: 2,017	Re: 100's of misc parts from the last 6 trucks parted out Tom, PayPal sent today. Thanks again.. Posted via Mobile Device __________________ Shawn 68 chevy K/20 05 chevy 3/4 4x4 71 short step-sold 71 chevy Beauville van My build. http://67-72chevytrucks.com/vboard/s...d.php?t=633039

05-13-2012, 09:50 PM	#306
jervin Registered User Join Date: Jul 2009 Location: Swartz Creek, Michigan Posts: 85	Re: 100's of misc parts from the last 6 trucks parted out Hey, thanks for the response regarding the inquiry on 67-68 inner fenders. When you are able to post them please keep in line. thanks, jervin

05-13-2012, 11:11 PM	#307
metaphysician Registered User Join Date: Apr 2012 Location: Middletown, DE Posts: 22	Re: 100's of misc parts from the last 6 trucks parted out Looking for the front right upper lock rod to the knob and clip. Will buy entire lock assembly if needed. Please let me know if you have this. Thanks! Attached Images

05-15-2012, 10:29 AM	#310
400smallblock Registered User Join Date: Apr 2012 Location: gardners,pa Posts: 48	Re: 100's of misc parts from the last 6 trucks parted out tom, i asked about a passenger side grill olding eyebrow back on the 7th. you responded and said you have one for 15.00 driver quality. i responded saying id take it. i havent seen or heard anything since. do you still want to sell it? jason

05-15-2012, 08:42 PM	#313
unclesalty Registered User Join Date: Mar 2012 Location: saginaw mi Posts: 104	Re: 100's of misc parts from the last 6 trucks parted out hi there! you get a chance to price the ride for the harness-$15, & trim-$45 to 48609?

05-15-2012, 08:47 PM	#314
unclesalty Registered User Join Date: Mar 2012 Location: saginaw mi Posts: 104	Re: 100's of misc parts from the last 6 trucks parted out Whoa!!! that was incredibly fast! Howd you do that? esp? can you pm your address and all? thanks

05-15-2012, 08:57 PM	#315
unclesalty Registered User Join Date: Mar 2012 Location: saginaw mi Posts: 104	Re: 100's of misc parts from the last 6 trucks parted out ...and i ll try and get a m o out in the morning

05-15-2012, 09:04 PM	#316
unclesalty Registered User Join Date: Mar 2012 Location: saginaw mi Posts: 104	Re: 100's of misc parts from the last 6 trucks parted out .. for $89.28

05-16-2012, 12:29 PM	#318
CC69Rat Registered User Join Date: Jan 2011 Location: Chattanooga TN Posts: 6,212	Re: 100's of misc parts from the last 6 trucks parted out Do you still have the GMC eyebrows? I know this is an older thread but it looks like they might still be available? Please let me know, maybe send some pics when you can. Thanks. __________________ Chad 1967 C10 SWB - Project Savannah - 6.0/4L80 Currently underway 1968 C10 SWB - TOTY 2018, 50th Anniversary Tribute Project * Sold * Pride and Joy 1986 Silverado Short Fleet - Scarlet Sold 1985 Silverado Short Fleet Sold 2022 Jeep Gladiator Mojave 2001 Jeep Cherokee XJ 4x4 - Lifted, Built 1992 Jeep Cherokee XJ 4x4 - Lifted 2013 Honda Accord EX-L v6 Coupe 6spd (wife's ride)

05-17-2012, 07:46 AM	#320
CC69Rat Registered User Join Date: Jan 2011 Location: Chattanooga TN Posts: 6,212	Re: 100's of misc parts from the last 6 trucks parted out LH - drivers side? If you have a sec Id like to see a closer pic of it. Ill take it as long as its driver / driver + condition. Mine has a rust spot on it about the size of a quarter. Posted via Mobile Device __________________ Chad 1967 C10 SWB - Project Savannah - 6.0/4L80 Currently underway 1968 C10 SWB - TOTY 2018, 50th Anniversary Tribute Project * Sold * Pride and Joy 1986 Silverado Short Fleet - Scarlet Sold 1985 Silverado Short Fleet Sold 2022 Jeep Gladiator Mojave 2001 Jeep Cherokee XJ 4x4 - Lifted, Built 1992 Jeep Cherokee XJ 4x4 - Lifted 2013 Honda Accord EX-L v6 Coupe 6spd (wife's ride)

05-17-2012, 08:48 AM	#321
shawno72 C/10 junkie Join Date: Nov 2010 Location: Stockton Ca Posts: 9,093	Re: 100's of misc parts from the last 6 trucks parted out Hey Tom I am looking for the light socket that goes into to back of a standard heater control. Just a pigtail would be fine. If you have one how much shipped to 95240? Thank you. Posted via Mobile Device __________________ Shawn 70 LWB C10 current driver/project http://67-72chevytrucks.com/vboard/s...d.php?t=663051 68 SWB C10 Work in progress.....SOLD http://67-72chevytrucks.com/vboard/s...d.php?t=559520 72 LWB C10 Sold 71 LWB C10 Sold 68 LWB C10 CST Sold http://youtu.be/kbB0QrBIs9k My mom always had the best advice. It was just a tad late. After a fall that involved blood, she'd say....."Careful!"

05-17-2012, 09:25 PM	#323
Pmarti69 Registered User Join Date: Feb 2012 Location: North of Houston, Tx Posts: 346	Re: 100's of misc parts from the last 6 trucks parted out Paypal payment sent, thanks paul __________________ Houston Area Lawman 72 GMC Fleetside (AKA: MERLIN) ZZ4 Crate Engine TH400 with Stage two kit

05-17-2012, 11:34 PM	#324
shawno72 C/10 junkie Join Date: Nov 2010 Location: Stockton Ca Posts: 9,093	Re: 100's of misc parts from the last 6 trucks parted out Tom pm me your paypal and I'll get a payment for the light socket. Thank you. Posted via Mobile Device __________________ Shawn 70 LWB C10 current driver/project http://67-72chevytrucks.com/vboard/s...d.php?t=663051 68 SWB C10 Work in progress.....SOLD http://67-72chevytrucks.com/vboard/s...d.php?t=559520 72 LWB C10 Sold 71 LWB C10 Sold 68 LWB C10 CST Sold http://youtu.be/kbB0QrBIs9k My mom always had the best advice. It was just a tad late. After a fall that involved blood, she'd say....."Careful!"



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.